diff mbox series

[v2,2/2] drm/tiny: Add driver for Sharp Memory LCD

Message ID 20240726194456.1336484-3-lanzano.alex@gmail.com (mailing list archive)
State New, archived
Headers show
Series Add driver for Sharp Memory LCD | expand

Commit Message

Alex Lanzano July 26, 2024, 7:44 p.m. UTC
Add support for the monochrome Sharp Memory LCDs.

Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
Co-developed-by: Mehdi Djait <mehdi.djait@bootlin.com>
Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
---
 MAINTAINERS                         |   7 +
 drivers/gpu/drm/tiny/Kconfig        |  20 +
 drivers/gpu/drm/tiny/Makefile       |   1 +
 drivers/gpu/drm/tiny/sharp-memory.c | 726 ++++++++++++++++++++++++++++
 4 files changed, 754 insertions(+)
 create mode 100644 drivers/gpu/drm/tiny/sharp-memory.c

Comments

kernel test robot July 26, 2024, 10 p.m. UTC | #1
Hi Alex,

kernel test robot noticed the following build warnings:

[auto build test WARNING on robh/for-next]
[also build test WARNING on drm-misc/drm-misc-next linus/master v6.10 next-20240726]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]

url:    https://github.com/intel-lab-lkp/linux/commits/Alex-Lanzano/dt-bindings-display-Add-Sharp-Memory-LCD-bindings/20240727-035313
base:   https://git.kernel.org/pub/scm/linux/kernel/git/robh/linux.git for-next
patch link:    https://lore.kernel.org/r/20240726194456.1336484-3-lanzano.alex%40gmail.com
patch subject: [PATCH v2 2/2] drm/tiny: Add driver for Sharp Memory LCD
reproduce: (https://download.01.org/0day-ci/archive/20240727/202407270505.ADlarsms-lkp@intel.com/reproduce)

If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202407270505.ADlarsms-lkp@intel.com/

All warnings (new ones prefixed by >>):

   Warning: Documentation/devicetree/bindings/power/wakeup-source.txt references a file that doesn't exist: Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
   Warning: Documentation/devicetree/bindings/regulator/siliconmitus,sm5703-regulator.yaml references a file that doesn't exist: Documentation/devicetree/bindings/mfd/siliconmitus,sm5703.yaml
   Warning: Documentation/userspace-api/netlink/index.rst references a file that doesn't exist: Documentation/networking/netlink_spec/index.rst
   Warning: Documentation/userspace-api/netlink/specs.rst references a file that doesn't exist: Documentation/networking/netlink_spec/index.rst
   Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/reserved-memory/qcom
>> Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/display/sharp,sharp-memory.yaml
   Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/display/exynos/
   Warning: MAINTAINERS references a file that doesn't exist: Documentation/devicetree/bindings/misc/fsl,qoriq-mc.txt
   Using alabaster theme
Christophe JAILLET July 26, 2024, 10:12 p.m. UTC | #2
Le 26/07/2024 à 21:44, Alex Lanzano a écrit :
> Add support for the monochrome Sharp Memory LCDs.
> 
> Signed-off-by: Alex Lanzano <lanzano.alex-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> Co-developed-by: Mehdi Djait <mehdi.djait-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
> Signed-off-by: Mehdi Djait <mehdi.djait-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
> ---
>   MAINTAINERS                         |   7 +
>   drivers/gpu/drm/tiny/Kconfig        |  20 +
>   drivers/gpu/drm/tiny/Makefile       |   1 +
>   drivers/gpu/drm/tiny/sharp-memory.c | 726 ++++++++++++++++++++++++++++
>   4 files changed, 754 insertions(+)
>   create mode 100644 drivers/gpu/drm/tiny/sharp-memory.c
> 

Hi,

below some other tiny comments, hoping it helps.

Also "./scripts/checkpatch.pl --strict" gives some hints, should some be 
of interest.

> +static int sharp_memory_probe(struct spi_device *spi)
> +{
> +	int ret;
> +	struct device *dev;
> +	struct sharp_memory_device *smd;
> +	enum sharp_memory_model model;
> +	struct drm_device *drm;
> +	const char *vcom_mode_str;
> +
> +	ret = spi_setup(spi);
> +	if (ret < 0)
> +		return dev_err_probe(&spi->dev, ret, "Failed to setup spi device\n");
> +
> +	dev = &spi->dev;

6 times below, &spi->dev could be replaced by dev, to slightly simplify 
things.

> +	if (!dev->coherent_dma_mask) {
> +		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
> +		if (ret)
> +			return dev_err_probe(dev, ret, "Failed to set dma mask\n");
> +	}
> +
> +	smd = devm_drm_dev_alloc(&spi->dev, &sharp_memory_drm_driver,
> +				 struct sharp_memory_device, drm);

Missing error handling.

> +
> +	spi_set_drvdata(spi, smd);
> +
> +	smd->spi = spi;
> +	drm = &smd->drm;
> +	ret = drmm_mode_config_init(drm);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to initialize drm config\n");
> +
> +	smd->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
> +	if (smd->enable_gpio == NULL)

Nitpick: if (!smd->enable_gpio)

> +		dev_warn(&spi->dev, "Enable gpio not defined\n");
> +
> +	/*
> +	 * VCOM is a signal that prevents DC bias from being built up in
> +	 * the panel resulting in pixels being forever stuck in one state.
> +	 *
> +	 * This driver supports three different methods to generate this
> +	 * signal depending on EXTMODE pin:
> +	 *
> +	 * software (EXTMODE = L) - This mode uses a kthread to
> +	 * periodically send a "maintain display" message to the display,
> +	 * toggling the vcom bit on and off with each message
> +	 *
> +	 * external (EXTMODE = H) - This mode relies on an external
> +	 * clock to generate the signal on the EXTCOMM pin
> +	 *
> +	 * pwm (EXTMODE = H) - This mode uses a pwm device to generate
> +	 * the signal on the EXTCOMM pin
> +	 *
> +	 */
> +	smd->vcom = 0;

Nitpick: devm_drm_dev_alloc() already zeroes the allocated memory. So 
this is useless. Unless you think it gives some useful hint, it could be 
removed.

> +	if (device_property_read_string(&spi->dev, "vcom-mode", &vcom_mode_str))
> +		return dev_err_probe(dev, -EINVAL,
> +				     "Unable to find vcom-mode node in device tree\n");
> +
> +	if (!strcmp("software", vcom_mode_str)) {
> +		smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;

...

> +	smd->pitch = (SHARP_ADDR_PERIOD + smd->mode->hdisplay + SHARP_DUMMY_PERIOD) / 8;
> +	smd->tx_buffer_size = (SHARP_MODE_PERIOD +
> +			       (SHARP_ADDR_PERIOD + (smd->mode->hdisplay) + SHARP_DUMMY_PERIOD) *
> +			       smd->mode->vdisplay) / 8;
> +
> +	smd->tx_buffer = devm_kzalloc(&spi->dev, smd->tx_buffer_size, GFP_KERNEL);
> +	if (!smd->tx_buffer)
> +		return dev_err_probe(&spi->dev, -ENOMEM, "Unable to alloc tx buffer\n");

There is no need to log a message for memory allocation failure.
return -ENOMEM; should be just fine IMHO.

> +
> +	mutex_init(&smd->tx_mutex);
> +
> +	drm->mode_config.min_width = smd->mode->hdisplay;
> +	drm->mode_config.max_width = smd->mode->hdisplay;
> +	drm->mode_config.min_height = smd->mode->vdisplay;
> +	drm->mode_config.max_height = smd->mode->vdisplay;
> +
> +	ret = sharp_memory_pipe_init(drm, smd,
> +				     sharp_memory_formats,

Nitpick: you could save 1 LoC if this is put at the end of the previous 
line.

> +				     ARRAY_SIZE(sharp_memory_formats),
> +				     NULL);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to initialize display pipeline.\n");
> +
> +	drm_plane_enable_fb_damage_clips(&smd->plane);
> +	drm_mode_config_reset(drm);
> +
> +	ret = drm_dev_register(drm, 0);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to register drm device.\n");
> +
> +	drm_fbdev_dma_setup(drm, 0);
> +
> +	return 0;
> +}

...

CJ
Alex Lanzano July 27, 2024, 4:53 a.m. UTC | #3
On Sat, Jul 27, 2024 at 12:12:01AM GMT, Christophe JAILLET wrote:
> Le 26/07/2024 à 21:44, Alex Lanzano a écrit :
> > Add support for the monochrome Sharp Memory LCDs.
> > 
> > Signed-off-by: Alex Lanzano <lanzano.alex-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > Co-developed-by: Mehdi Djait <mehdi.djait-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
> > Signed-off-by: Mehdi Djait <mehdi.djait-LDxbnhwyfcJBDgjK7y7TUQ@public.gmane.org>
> > ---
> >   MAINTAINERS                         |   7 +
> >   drivers/gpu/drm/tiny/Kconfig        |  20 +
> >   drivers/gpu/drm/tiny/Makefile       |   1 +
> >   drivers/gpu/drm/tiny/sharp-memory.c | 726 ++++++++++++++++++++++++++++
> >   4 files changed, 754 insertions(+)
> >   create mode 100644 drivers/gpu/drm/tiny/sharp-memory.c
> > 
> 
> Hi,
> 
> below some other tiny comments, hoping it helps.
> 
> Also "./scripts/checkpatch.pl --strict" gives some hints, should some be of
> interest.
> 

Ah! Thank you. I'll be sure to use strict from now on

> > +static int sharp_memory_probe(struct spi_device *spi)
> > +{
> > +	int ret;
> > +	struct device *dev;
> > +	struct sharp_memory_device *smd;
> > +	enum sharp_memory_model model;
> > +	struct drm_device *drm;
> > +	const char *vcom_mode_str;
> > +
> > +	ret = spi_setup(spi);
> > +	if (ret < 0)
> > +		return dev_err_probe(&spi->dev, ret, "Failed to setup spi device\n");
> > +
> > +	dev = &spi->dev;
> 
> 6 times below, &spi->dev could be replaced by dev, to slightly simplify
> things.
> 
> > +	if (!dev->coherent_dma_mask) {
> > +		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
> > +		if (ret)
> > +			return dev_err_probe(dev, ret, "Failed to set dma mask\n");
> > +	}
> > +
> > +	smd = devm_drm_dev_alloc(&spi->dev, &sharp_memory_drm_driver,
> > +				 struct sharp_memory_device, drm);
> 
> Missing error handling.
> 
> > +
> > +	spi_set_drvdata(spi, smd);
> > +
> > +	smd->spi = spi;
> > +	drm = &smd->drm;
> > +	ret = drmm_mode_config_init(drm);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to initialize drm config\n");
> > +
> > +	smd->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
> > +	if (smd->enable_gpio == NULL)
> 
> Nitpick: if (!smd->enable_gpio)
> 
> > +		dev_warn(&spi->dev, "Enable gpio not defined\n");
> > +
> > +	/*
> > +	 * VCOM is a signal that prevents DC bias from being built up in
> > +	 * the panel resulting in pixels being forever stuck in one state.
> > +	 *
> > +	 * This driver supports three different methods to generate this
> > +	 * signal depending on EXTMODE pin:
> > +	 *
> > +	 * software (EXTMODE = L) - This mode uses a kthread to
> > +	 * periodically send a "maintain display" message to the display,
> > +	 * toggling the vcom bit on and off with each message
> > +	 *
> > +	 * external (EXTMODE = H) - This mode relies on an external
> > +	 * clock to generate the signal on the EXTCOMM pin
> > +	 *
> > +	 * pwm (EXTMODE = H) - This mode uses a pwm device to generate
> > +	 * the signal on the EXTCOMM pin
> > +	 *
> > +	 */
> > +	smd->vcom = 0;
> 
> Nitpick: devm_drm_dev_alloc() already zeroes the allocated memory. So this
> is useless. Unless you think it gives some useful hint, it could be removed.
> 
> > +	if (device_property_read_string(&spi->dev, "vcom-mode", &vcom_mode_str))
> > +		return dev_err_probe(dev, -EINVAL,
> > +				     "Unable to find vcom-mode node in device tree\n");
> > +
> > +	if (!strcmp("software", vcom_mode_str)) {
> > +		smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;
> 
> ...
> 
> > +	smd->pitch = (SHARP_ADDR_PERIOD + smd->mode->hdisplay + SHARP_DUMMY_PERIOD) / 8;
> > +	smd->tx_buffer_size = (SHARP_MODE_PERIOD +
> > +			       (SHARP_ADDR_PERIOD + (smd->mode->hdisplay) + SHARP_DUMMY_PERIOD) *
> > +			       smd->mode->vdisplay) / 8;
> > +
> > +	smd->tx_buffer = devm_kzalloc(&spi->dev, smd->tx_buffer_size, GFP_KERNEL);
> > +	if (!smd->tx_buffer)
> > +		return dev_err_probe(&spi->dev, -ENOMEM, "Unable to alloc tx buffer\n");
> 
> There is no need to log a message for memory allocation failure.
> return -ENOMEM; should be just fine IMHO.
> 
> > +
> > +	mutex_init(&smd->tx_mutex);
> > +
> > +	drm->mode_config.min_width = smd->mode->hdisplay;
> > +	drm->mode_config.max_width = smd->mode->hdisplay;
> > +	drm->mode_config.min_height = smd->mode->vdisplay;
> > +	drm->mode_config.max_height = smd->mode->vdisplay;
> > +
> > +	ret = sharp_memory_pipe_init(drm, smd,
> > +				     sharp_memory_formats,
> 
> Nitpick: you could save 1 LoC if this is put at the end of the previous
> line.
> 
> > +				     ARRAY_SIZE(sharp_memory_formats),
> > +				     NULL);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to initialize display pipeline.\n");
> > +
> > +	drm_plane_enable_fb_damage_clips(&smd->plane);
> > +	drm_mode_config_reset(drm);
> > +
> > +	ret = drm_dev_register(drm, 0);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to register drm device.\n");
> > +
> > +	drm_fbdev_dma_setup(drm, 0);
> > +
> > +	return 0;
> > +}
> 
> ...
> 
> CJ
> 
> 

I appreciate the review! I'll get these addressed in v3

Best regards,
Alex
Krzysztof Kozlowski July 27, 2024, 9:03 a.m. UTC | #4
On 26/07/2024 21:44, Alex Lanzano wrote:
> Add support for the monochrome Sharp Memory LCDs.
> 
> Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
> Co-developed-by: Mehdi Djait <mehdi.djait@bootlin.com>
> Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
> ---
>  MAINTAINERS                         |   7 +
>  drivers/gpu/drm/tiny/Kconfig        |  20 +
>  drivers/gpu/drm/tiny/Makefile       |   1 +
>  drivers/gpu/drm/tiny/sharp-memory.c | 726 ++++++++++++++++++++++++++++
>  4 files changed, 754 insertions(+)
>  create mode 100644 drivers/gpu/drm/tiny/sharp-memory.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 71b739b40921..b5b08247a994 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7123,6 +7123,13 @@ S:	Maintained
>  F:	Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
>  F:	drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
>  
> +DRM DRIVER FOR SHARP MEMORY LCD
> +M:	Alex Lanzano <lanzano.alex@gmail.com>
> +S:	Maintained
> +T:	git git://anongit.freedesktop.org/drm/drm-misc


Do you have drm-misc commit rights? If not, drop it. There is no point
to put some other maintainer's tree in your entry. Git tree is already
present in the maintainer's entry who is going to apply the patches.


> +F:	Documentation/devicetree/bindings/display/sharp,sharp-memory.yaml

If you rename the file in your patchset, you must rename it EVERYWHERE.


> +F:	drivers/gpu/drm/tiny/sharp-memory.c
> +
>  DRM DRIVER FOR SITRONIX ST7586 PANELS


...

> +	smd->spi = spi;
> +	drm = &smd->drm;
> +	ret = drmm_mode_config_init(drm);
> +	if (ret)
> +		return dev_err_probe(dev, ret, "Failed to initialize drm config\n");
> +
> +	smd->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
> +	if (smd->enable_gpio == NULL)
> +		dev_warn(&spi->dev, "Enable gpio not defined\n");
> +
> +	/*
> +	 * VCOM is a signal that prevents DC bias from being built up in
> +	 * the panel resulting in pixels being forever stuck in one state.
> +	 *
> +	 * This driver supports three different methods to generate this
> +	 * signal depending on EXTMODE pin:
> +	 *
> +	 * software (EXTMODE = L) - This mode uses a kthread to
> +	 * periodically send a "maintain display" message to the display,
> +	 * toggling the vcom bit on and off with each message
> +	 *
> +	 * external (EXTMODE = H) - This mode relies on an external
> +	 * clock to generate the signal on the EXTCOMM pin
> +	 *
> +	 * pwm (EXTMODE = H) - This mode uses a pwm device to generate
> +	 * the signal on the EXTCOMM pin
> +	 *
> +	 */
> +	smd->vcom = 0;
> +	if (device_property_read_string(&spi->dev, "vcom-mode", &vcom_mode_str))
> +		return dev_err_probe(dev, -EINVAL,
> +				     "Unable to find vcom-mode node in device tree\n");
> +
> +	if (!strcmp("software", vcom_mode_str)) {
> +		smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;
> +
> +	} else if (!strcmp("external", vcom_mode_str)) {
> +		smd->vcom_mode = SHARP_MEMORY_EXTERNAL_VCOM;
> +
> +	} else if (!strcmp("pwm", vcom_mode_str)) {
> +		smd->vcom_mode = SHARP_MEMORY_PWM_VCOM;
> +		ret = sharp_memory_init_pwm_vcom_signal(smd);
> +		if (ret)
> +			return dev_err_probe(dev, ret,
> +					     "Failed to initialize external COM signal\n");
> +	} else {
> +		return dev_err_probe(dev, -EINVAL, "Invalid value set for vcom-mode\n");
> +	}
> +
> +	drm->mode_config.funcs = &sharp_memory_mode_config_funcs;
> +
> +	/* Set the DRM display mode depending on panel model */
> +	model = (uintptr_t)spi_get_device_match_data(spi);
> +	switch (model) {
> +	case LS013B7DH03:
> +		smd->mode = &sharp_memory_ls013b7dh03_mode;
> +		break;
> +
> +	case LS010B7DH04:
> +		smd->mode = &sharp_memory_ls010b7dh04_mode;
> +		break;
> +
> +	case LS011B7DH03:
> +		smd->mode = &sharp_memory_ls011b7dh03_mode;
> +		break;
> +
> +	case LS012B7DD01:
> +		smd->mode = &sharp_memory_ls012b7dd01_mode;
> +		break;
> +
> +	case LS013B7DH05:
> +		smd->mode = &sharp_memory_ls013b7dh05_mode;
> +		break;
> +
> +	case LS018B7DH02:
> +		smd->mode = &sharp_memory_ls018b7dh02_mode;
> +		break;
> +
> +	case LS027B7DH01:
> +		fallthrough;
> +	case LS027B7DH01A:
> +		smd->mode = &sharp_memory_ls027b7dh01_mode;
> +		break;
> +
> +	case LS032B7DD02:
> +		smd->mode = &sharp_memory_ls032b7dd02_mode;
> +		break;
> +
> +	case LS044Q7DH01:
> +		smd->mode = &sharp_memory_ls044q7dh01_mode;
> +		break;

This is over-complicated. Just store the mode in device match data.


> +
> +	default:
> +		return dev_err_probe(&spi->dev, -EINVAL, "Invalid DRM display mode\n");
> +	}


Best regards,
Krzysztof
Alex Lanzano July 27, 2024, 5:45 p.m. UTC | #5
On Sat, Jul 27, 2024 at 11:03:19AM GMT, Krzysztof Kozlowski wrote:
> On 26/07/2024 21:44, Alex Lanzano wrote:
> > Add support for the monochrome Sharp Memory LCDs.
> > 
> > Signed-off-by: Alex Lanzano <lanzano.alex@gmail.com>
> > Co-developed-by: Mehdi Djait <mehdi.djait@bootlin.com>
> > Signed-off-by: Mehdi Djait <mehdi.djait@bootlin.com>
> > ---
> >  MAINTAINERS                         |   7 +
> >  drivers/gpu/drm/tiny/Kconfig        |  20 +
> >  drivers/gpu/drm/tiny/Makefile       |   1 +
> >  drivers/gpu/drm/tiny/sharp-memory.c | 726 ++++++++++++++++++++++++++++
> >  4 files changed, 754 insertions(+)
> >  create mode 100644 drivers/gpu/drm/tiny/sharp-memory.c
> > 
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index 71b739b40921..b5b08247a994 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -7123,6 +7123,13 @@ S:	Maintained
> >  F:	Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
> >  F:	drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
> >  
> > +DRM DRIVER FOR SHARP MEMORY LCD
> > +M:	Alex Lanzano <lanzano.alex@gmail.com>
> > +S:	Maintained
> > +T:	git git://anongit.freedesktop.org/drm/drm-misc
> 
> 
> Do you have drm-misc commit rights? If not, drop it. There is no point
> to put some other maintainer's tree in your entry. Git tree is already
> present in the maintainer's entry who is going to apply the patches.
> 
> 

Will remove.

> > +F:	Documentation/devicetree/bindings/display/sharp,sharp-memory.yaml
> 
> If you rename the file in your patchset, you must rename it EVERYWHERE.
> 
> 

Will do.

> > +F:	drivers/gpu/drm/tiny/sharp-memory.c
> > +
> >  DRM DRIVER FOR SITRONIX ST7586 PANELS
> 
> 
> ...
> 

Oh! Did you need me to rename sharp-memory.c as well?

> > +	smd->spi = spi;
> > +	drm = &smd->drm;
> > +	ret = drmm_mode_config_init(drm);
> > +	if (ret)
> > +		return dev_err_probe(dev, ret, "Failed to initialize drm config\n");
> > +
> > +	smd->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
> > +	if (smd->enable_gpio == NULL)
> > +		dev_warn(&spi->dev, "Enable gpio not defined\n");
> > +
> > +	/*
> > +	 * VCOM is a signal that prevents DC bias from being built up in
> > +	 * the panel resulting in pixels being forever stuck in one state.
> > +	 *
> > +	 * This driver supports three different methods to generate this
> > +	 * signal depending on EXTMODE pin:
> > +	 *
> > +	 * software (EXTMODE = L) - This mode uses a kthread to
> > +	 * periodically send a "maintain display" message to the display,
> > +	 * toggling the vcom bit on and off with each message
> > +	 *
> > +	 * external (EXTMODE = H) - This mode relies on an external
> > +	 * clock to generate the signal on the EXTCOMM pin
> > +	 *
> > +	 * pwm (EXTMODE = H) - This mode uses a pwm device to generate
> > +	 * the signal on the EXTCOMM pin
> > +	 *
> > +	 */
> > +	smd->vcom = 0;
> > +	if (device_property_read_string(&spi->dev, "vcom-mode", &vcom_mode_str))
> > +		return dev_err_probe(dev, -EINVAL,
> > +				     "Unable to find vcom-mode node in device tree\n");
> > +
> > +	if (!strcmp("software", vcom_mode_str)) {
> > +		smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;
> > +
> > +	} else if (!strcmp("external", vcom_mode_str)) {
> > +		smd->vcom_mode = SHARP_MEMORY_EXTERNAL_VCOM;
> > +
> > +	} else if (!strcmp("pwm", vcom_mode_str)) {
> > +		smd->vcom_mode = SHARP_MEMORY_PWM_VCOM;
> > +		ret = sharp_memory_init_pwm_vcom_signal(smd);
> > +		if (ret)
> > +			return dev_err_probe(dev, ret,
> > +					     "Failed to initialize external COM signal\n");
> > +	} else {
> > +		return dev_err_probe(dev, -EINVAL, "Invalid value set for vcom-mode\n");
> > +	}
> > +
> > +	drm->mode_config.funcs = &sharp_memory_mode_config_funcs;
> > +
> > +	/* Set the DRM display mode depending on panel model */
> > +	model = (uintptr_t)spi_get_device_match_data(spi);
> > +	switch (model) {
> > +	case LS013B7DH03:
> > +		smd->mode = &sharp_memory_ls013b7dh03_mode;
> > +		break;
> > +
> > +	case LS010B7DH04:
> > +		smd->mode = &sharp_memory_ls010b7dh04_mode;
> > +		break;
> > +
> > +	case LS011B7DH03:
> > +		smd->mode = &sharp_memory_ls011b7dh03_mode;
> > +		break;
> > +
> > +	case LS012B7DD01:
> > +		smd->mode = &sharp_memory_ls012b7dd01_mode;
> > +		break;
> > +
> > +	case LS013B7DH05:
> > +		smd->mode = &sharp_memory_ls013b7dh05_mode;
> > +		break;
> > +
> > +	case LS018B7DH02:
> > +		smd->mode = &sharp_memory_ls018b7dh02_mode;
> > +		break;
> > +
> > +	case LS027B7DH01:
> > +		fallthrough;
> > +	case LS027B7DH01A:
> > +		smd->mode = &sharp_memory_ls027b7dh01_mode;
> > +		break;
> > +
> > +	case LS032B7DD02:
> > +		smd->mode = &sharp_memory_ls032b7dd02_mode;
> > +		break;
> > +
> > +	case LS044Q7DH01:
> > +		smd->mode = &sharp_memory_ls044q7dh01_mode;
> > +		break;
> 
> This is over-complicated. Just store the mode in device match data.
> 
> 

Will simplify in v3

> > +
> > +	default:
> > +		return dev_err_probe(&spi->dev, -EINVAL, "Invalid DRM display mode\n");
> > +	}
> 
> 
> Best regards,
> Krzysztof
> 

Thank you for taking the time to review!

Best regards,
Alex
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 71b739b40921..b5b08247a994 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7123,6 +7123,13 @@  S:	Maintained
 F:	Documentation/devicetree/bindings/display/panel/samsung,s6d7aa0.yaml
 F:	drivers/gpu/drm/panel/panel-samsung-s6d7aa0.c
 
+DRM DRIVER FOR SHARP MEMORY LCD
+M:	Alex Lanzano <lanzano.alex@gmail.com>
+S:	Maintained
+T:	git git://anongit.freedesktop.org/drm/drm-misc
+F:	Documentation/devicetree/bindings/display/sharp,sharp-memory.yaml
+F:	drivers/gpu/drm/tiny/sharp-memory.c
+
 DRM DRIVER FOR SITRONIX ST7586 PANELS
 M:	David Lechner <david@lechnology.com>
 S:	Maintained
diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
index f6889f649bc1..bc386954faa2 100644
--- a/drivers/gpu/drm/tiny/Kconfig
+++ b/drivers/gpu/drm/tiny/Kconfig
@@ -186,6 +186,26 @@  config TINYDRM_REPAPER
 
 	  If M is selected the module will be called repaper.
 
+config TINYDRM_SHARP_MEMORY
+	tristate "DRM support for Sharp Memory LCD panels"
+	depends on DRM && SPI
+	select DRM_GEM_DMA_HELPER
+	select DRM_KMS_HELPER
+	help
+	  DRM Driver for the following Sharp Memory Panels:
+	  * 1.00" Sharp Memory LCD (LS010B7DH04)
+	  * 1.10" Sharp Memory LCD (LS011B7DH03)
+	  * 1.20" Sharp Memory LCD (LS012B7DD01)
+	  * 1.28" Sharp Memory LCD (LS013B7DH03)
+	  * 1.26" Sharp Memory LCD (LS013B7DH05)
+	  * 1.80" Sharp Memory LCD (LS018B7DH02)
+	  * 2.70" Sharp Memory LCD (LS027B7DH01)
+	  * 2.70" Sharp Memory LCD (LS027B7DH01A)
+	  * 3.20" Sharp Memory LCD (LS032B7DD02)
+	  * 4.40" Sharp Memory LCD (LS044Q7DH01)
+
+	  If M is selected the module will be called sharp_memory.
+
 config TINYDRM_ST7586
 	tristate "DRM support for Sitronix ST7586 display panels"
 	depends on DRM && SPI
diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
index 76dde89a044b..4aaf56f8707d 100644
--- a/drivers/gpu/drm/tiny/Makefile
+++ b/drivers/gpu/drm/tiny/Makefile
@@ -14,5 +14,6 @@  obj-$(CONFIG_TINYDRM_ILI9341)		+= ili9341.o
 obj-$(CONFIG_TINYDRM_ILI9486)		+= ili9486.o
 obj-$(CONFIG_TINYDRM_MI0283QT)		+= mi0283qt.o
 obj-$(CONFIG_TINYDRM_REPAPER)		+= repaper.o
+obj-$(CONFIG_TINYDRM_SHARP_MEMORY)	+= sharp-memory.o
 obj-$(CONFIG_TINYDRM_ST7586)		+= st7586.o
 obj-$(CONFIG_TINYDRM_ST7735R)		+= st7735r.o
diff --git a/drivers/gpu/drm/tiny/sharp-memory.c b/drivers/gpu/drm/tiny/sharp-memory.c
new file mode 100644
index 000000000000..facff2b955ec
--- /dev/null
+++ b/drivers/gpu/drm/tiny/sharp-memory.c
@@ -0,0 +1,726 @@ 
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_damage_helper.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_fb_dma_helper.h>
+#include <drm/drm_fbdev_dma.h>
+#include <drm/drm_format_helper.h>
+#include <drm/drm_framebuffer.h>
+#include <drm/drm_gem_atomic_helper.h>
+#include <drm/drm_gem_dma_helper.h>
+#include <drm/drm_gem_framebuffer_helper.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_probe_helper.h>
+#include <drm/drm_rect.h>
+#include <linux/bitrev.h>
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/kthread.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/pwm.h>
+#include <linux/spi/spi.h>
+
+#define SHARP_MODE_PERIOD 8
+#define SHARP_ADDR_PERIOD 8
+#define SHARP_DUMMY_PERIOD 8
+
+#define SHARP_MEMORY_DISPLAY_MAINTAIN_MODE 0
+#define SHARP_MEMORY_DISPLAY_UPDATE_MODE 1
+#define SHARP_MEMORY_DISPLAY_CLEAR_MODE 4
+
+enum sharp_memory_model {
+	LS010B7DH04,
+	LS011B7DH03,
+	LS012B7DD01,
+	LS013B7DH03,
+	LS013B7DH05,
+	LS018B7DH02,
+	LS027B7DH01,
+	LS027B7DH01A,
+	LS032B7DD02,
+	LS044Q7DH01,
+};
+
+enum sharp_memory_vcom_mode {
+	SHARP_MEMORY_SOFTWARE_VCOM,
+	SHARP_MEMORY_EXTERNAL_VCOM,
+	SHARP_MEMORY_PWM_VCOM
+};
+
+struct sharp_memory_device {
+	struct drm_device drm;
+	struct spi_device *spi;
+
+	const struct drm_display_mode *mode;
+
+	struct drm_crtc crtc;
+	struct drm_plane plane;
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+
+	struct gpio_desc *enable_gpio;
+
+	struct task_struct *sw_vcom_signal;
+	struct pwm_device *pwm_vcom_signal;
+
+	enum sharp_memory_vcom_mode vcom_mode;
+	uint8_t vcom;
+
+	uint32_t pitch;
+	uint32_t tx_buffer_size;
+	uint8_t *tx_buffer;
+	struct mutex tx_mutex;
+};
+
+static inline int sharp_memory_spi_write(struct spi_device *spi, void *buf, size_t len)
+{
+	/* Reverse the bit order */
+	for (uint8_t *b = buf; b < ((uint8_t *)buf) + len; ++b)
+		*b = bitrev8(*b);
+
+	return spi_write(spi, buf, len);
+}
+
+static inline struct sharp_memory_device *drm_to_sharp_memory_device(struct drm_device *drm)
+{
+	return container_of(drm, struct sharp_memory_device, drm);
+}
+
+DEFINE_DRM_GEM_DMA_FOPS(sharp_memory_fops);
+
+static const struct drm_driver sharp_memory_drm_driver = {
+	.driver_features	= DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
+	.fops			= &sharp_memory_fops,
+	DRM_GEM_DMA_DRIVER_OPS_VMAP,
+	.name			= "sharp_memory_display",
+	.desc			= "Sharp Display Memory LCD",
+	.date			= "20231129",
+	.major			= 1,
+	.minor			= 0,
+};
+
+static inline void sharp_memory_set_tx_buffer_mode(uint8_t *buffer, uint8_t mode, uint8_t vcom)
+{
+
+	*buffer = mode | (vcom << 1);
+}
+
+static inline void sharp_memory_set_tx_buffer_addresses(uint8_t *buffer,
+							struct drm_rect clip,
+							uint32_t pitch)
+{
+	for (uint32_t line = 0; line < clip.y2; ++line)
+		buffer[line * pitch] = line + 1;
+
+}
+
+static void sharp_memory_set_tx_buffer_data(uint8_t *buffer,
+					    struct drm_framebuffer *fb,
+					    struct drm_rect clip,
+					    uint32_t pitch,
+					    struct drm_format_conv_state *fmtcnv_state)
+{
+	int ret;
+	struct iosys_map dst, vmap;
+	struct drm_gem_dma_object *dma_obj = drm_fb_dma_get_gem_obj(fb, 0);
+
+	ret = drm_gem_fb_begin_cpu_access(fb, DMA_FROM_DEVICE);
+	if (ret)
+		return;
+
+	iosys_map_set_vaddr(&dst, buffer);
+	iosys_map_set_vaddr(&vmap, dma_obj->vaddr);
+
+	drm_fb_xrgb8888_to_mono(&dst, &pitch, &vmap, fb, &clip, fmtcnv_state);
+
+	drm_gem_fb_end_cpu_access(fb, DMA_FROM_DEVICE);
+}
+
+static int sharp_memory_update_display(struct sharp_memory_device *smd,
+				       struct drm_framebuffer *fb,
+				       struct drm_rect clip,
+				       struct drm_format_conv_state *fmtcnv_state)
+{
+	int ret;
+	uint32_t pitch = smd->pitch;
+	uint8_t vcom = smd->vcom;
+	uint8_t *tx_buffer = smd->tx_buffer;
+	uint32_t tx_buffer_size = smd->tx_buffer_size;
+
+	mutex_lock(&smd->tx_mutex);
+
+	/* Populate the transmit buffer with frame data */
+	sharp_memory_set_tx_buffer_mode(&tx_buffer[0],
+					SHARP_MEMORY_DISPLAY_UPDATE_MODE, vcom);
+	sharp_memory_set_tx_buffer_addresses(&tx_buffer[1], clip, pitch);
+	sharp_memory_set_tx_buffer_data(&tx_buffer[2], fb, clip, pitch, fmtcnv_state);
+
+	ret = sharp_memory_spi_write(smd->spi, tx_buffer, tx_buffer_size);
+
+	mutex_unlock(&smd->tx_mutex);
+
+	return ret;
+}
+
+static int sharp_memory_maintain_display(struct sharp_memory_device *smd)
+{
+	int ret;
+	uint8_t vcom = smd->vcom;
+	uint8_t *tx_buffer = smd->tx_buffer;
+
+	mutex_lock(&smd->tx_mutex);
+
+	sharp_memory_set_tx_buffer_mode(&tx_buffer[0], SHARP_MEMORY_DISPLAY_MAINTAIN_MODE, vcom);
+	tx_buffer[1] = 0; // Write dummy data
+	ret = sharp_memory_spi_write(smd->spi, tx_buffer, 2);
+
+	mutex_unlock(&smd->tx_mutex);
+
+	return ret;
+}
+
+static int sharp_memory_clear_display(struct sharp_memory_device *smd)
+{
+	int ret;
+	uint8_t vcom = smd->vcom;
+	uint8_t *tx_buffer = smd->tx_buffer;
+
+	mutex_lock(&smd->tx_mutex);
+
+	sharp_memory_set_tx_buffer_mode(&tx_buffer[0], SHARP_MEMORY_DISPLAY_CLEAR_MODE, vcom);
+	tx_buffer[1] = 0; // write dummy data
+	ret = sharp_memory_spi_write(smd->spi, tx_buffer, 2);
+
+	mutex_unlock(&smd->tx_mutex);
+
+	return ret;
+}
+
+static void sharp_memory_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect,
+				  struct drm_format_conv_state *fmtconv_state)
+{
+	struct drm_rect clip;
+	struct sharp_memory_device *smd = drm_to_sharp_memory_device(fb->dev);
+
+	/* Always update a full line regardless of what is dirty */
+	clip.x1 = 0;
+	clip.x2 = fb->width;
+	clip.y1 = rect->y1;
+	clip.y2 = rect->y2;
+
+	sharp_memory_update_display(smd, fb, clip, fmtconv_state);
+}
+
+static int sharp_memory_plane_atomic_check(struct drm_plane *plane,
+					   struct drm_atomic_state *state)
+{
+	struct drm_plane_state *plane_state = drm_atomic_get_new_plane_state(state, plane);
+	struct sharp_memory_device *smd;
+	struct drm_crtc_state *crtc_state;
+
+	smd = container_of(plane, struct sharp_memory_device, plane);
+	crtc_state = drm_atomic_get_new_crtc_state(state, &smd->crtc);
+
+	return drm_atomic_helper_check_plane_state(plane_state, crtc_state,
+						   DRM_PLANE_NO_SCALING,
+						   DRM_PLANE_NO_SCALING,
+						   false, false);
+}
+
+static void sharp_memory_plane_atomic_update(struct drm_plane *plane,
+					     struct drm_atomic_state *state)
+{
+
+	struct drm_plane_state *old_state = drm_atomic_get_old_plane_state(state, plane);
+	struct drm_plane_state *plane_state = plane->state;
+	struct drm_format_conv_state fmtcnv_state = DRM_FORMAT_CONV_STATE_INIT;
+	struct sharp_memory_device *smd;
+	struct drm_rect rect;
+
+	smd = container_of(plane, struct sharp_memory_device, plane);
+	if (!smd->crtc.state->active)
+		return;
+
+	if (drm_atomic_helper_damage_merged(old_state, plane_state, &rect))
+		sharp_memory_fb_dirty(plane_state->fb, &rect, &fmtcnv_state);
+
+	drm_format_conv_state_release(&fmtcnv_state);
+}
+
+static const struct drm_plane_helper_funcs sharp_memory_plane_helper_funcs = {
+	.prepare_fb = drm_gem_plane_helper_prepare_fb,
+	.atomic_check = sharp_memory_plane_atomic_check,
+	.atomic_update = sharp_memory_plane_atomic_update,
+};
+
+static bool sharp_memory_format_mod_supported(struct drm_plane *plane,
+					      uint32_t format,
+					      uint64_t modifier)
+{
+	return modifier == DRM_FORMAT_MOD_LINEAR;
+}
+
+static const struct drm_plane_funcs sharp_memory_plane_funcs = {
+	.update_plane = drm_atomic_helper_update_plane,
+	.disable_plane = drm_atomic_helper_disable_plane,
+	.destroy = drm_plane_cleanup,
+	.reset = drm_atomic_helper_plane_reset,
+	.atomic_duplicate_state	= drm_atomic_helper_plane_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
+	.format_mod_supported = sharp_memory_format_mod_supported,
+};
+
+static enum drm_mode_status sharp_memory_crtc_mode_valid(struct drm_crtc *crtc,
+							 const struct drm_display_mode *mode)
+{
+	struct sharp_memory_device *smd = drm_to_sharp_memory_device(crtc->dev);
+
+	return drm_crtc_helper_mode_valid_fixed(crtc, mode, smd->mode);
+}
+
+static int sharp_memory_crtc_check(struct drm_crtc *crtc,
+				   struct drm_atomic_state *state)
+{
+	struct drm_crtc_state *crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	int ret;
+
+	if (!crtc_state->enable)
+		goto out;
+
+	ret = drm_atomic_helper_check_crtc_primary_plane(crtc_state);
+	if (ret)
+		return ret;
+
+out:
+	return drm_atomic_add_affected_planes(state, crtc);
+}
+
+static int sharp_memory_sw_vcom_signal_thread(void *data)
+{
+	struct sharp_memory_device *smd = data;
+
+	while (!kthread_should_stop()) {
+		smd->vcom ^= 1; // Toggle vcom
+		sharp_memory_maintain_display(smd);
+		msleep(1000);
+	}
+
+	return 0;
+}
+
+static void sharp_memory_crtc_enable(struct drm_crtc *crtc,
+				     struct drm_atomic_state *state)
+{
+	struct pwm_state pwm_state;
+	struct sharp_memory_device *smd = drm_to_sharp_memory_device(crtc->dev);
+
+	sharp_memory_clear_display(smd);
+
+	if (smd->enable_gpio)
+		gpiod_set_value(smd->enable_gpio, 1);
+
+	switch (smd->vcom_mode) {
+	case SHARP_MEMORY_SOFTWARE_VCOM:
+		smd->sw_vcom_signal = kthread_run(sharp_memory_sw_vcom_signal_thread,
+						  smd, "sw_vcom_signal");
+		break;
+
+	case SHARP_MEMORY_EXTERNAL_VCOM:
+		break;
+
+	case SHARP_MEMORY_PWM_VCOM:
+		pwm_get_state(smd->pwm_vcom_signal, &pwm_state);
+		pwm_state.period =    1000000000;
+		pwm_state.duty_cycle = 100000000;
+		pwm_state.enabled = true;
+		pwm_apply_state(smd->pwm_vcom_signal, &pwm_state);
+		break;
+	}
+}
+
+static void sharp_memory_crtc_disable(struct drm_crtc *crtc,
+				      struct drm_atomic_state *state)
+{
+	struct sharp_memory_device *smd = drm_to_sharp_memory_device(crtc->dev);
+
+	sharp_memory_clear_display(smd);
+
+	if (smd->enable_gpio)
+		gpiod_set_value(smd->enable_gpio, 0);
+
+	switch (smd->vcom_mode) {
+	case SHARP_MEMORY_SOFTWARE_VCOM:
+		kthread_stop(smd->sw_vcom_signal);
+		break;
+
+	case SHARP_MEMORY_EXTERNAL_VCOM:
+		break;
+
+	case SHARP_MEMORY_PWM_VCOM:
+		pwm_disable(smd->pwm_vcom_signal);
+		break;
+	}
+}
+
+static const struct drm_crtc_helper_funcs sharp_memory_crtc_helper_funcs = {
+	.mode_valid = sharp_memory_crtc_mode_valid,
+	.atomic_check = sharp_memory_crtc_check,
+	.atomic_enable = sharp_memory_crtc_enable,
+	.atomic_disable = sharp_memory_crtc_disable,
+};
+
+static const struct drm_crtc_funcs sharp_memory_crtc_funcs = {
+	.reset = drm_atomic_helper_crtc_reset,
+	.destroy = drm_crtc_cleanup,
+	.set_config = drm_atomic_helper_set_config,
+	.page_flip = drm_atomic_helper_page_flip,
+	.atomic_duplicate_state = drm_atomic_helper_crtc_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_crtc_destroy_state,
+};
+
+static const struct drm_encoder_funcs sharp_memory_encoder_funcs = {
+	.destroy = drm_encoder_cleanup,
+};
+
+static int sharp_memory_connector_get_modes(struct drm_connector *connector)
+{
+	struct sharp_memory_device *smd = drm_to_sharp_memory_device(connector->dev);
+
+	return drm_connector_helper_get_modes_fixed(connector, smd->mode);
+}
+
+static const struct drm_connector_helper_funcs sharp_memory_connector_hfuncs = {
+	.get_modes = sharp_memory_connector_get_modes,
+};
+
+static const struct drm_connector_funcs sharp_memory_connector_funcs = {
+	.reset = drm_atomic_helper_connector_reset,
+	.fill_modes = drm_helper_probe_single_connector_modes,
+	.destroy = drm_connector_cleanup,
+	.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
+	.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
+
+};
+
+static const struct drm_mode_config_funcs sharp_memory_mode_config_funcs = {
+	.fb_create = drm_gem_fb_create_with_dirty,
+	.atomic_check = drm_atomic_helper_check,
+	.atomic_commit = drm_atomic_helper_commit,
+};
+
+static const struct spi_device_id sharp_memory_ids[] = {
+	{"ls010b7dh04", LS010B7DH04},
+	{"ls011b7dh03", LS011B7DH03},
+	{"ls012b7dd01", LS012B7DD01},
+	{"ls013b7dh03", LS013B7DH03},
+	{"ls013b7dh05", LS013B7DH05},
+	{"ls018b7dh02", LS018B7DH02},
+	{"ls027b7dh01", LS027B7DH01},
+	{"ls027b7dh01a", LS027B7DH01A},
+	{"ls032b7dd02", LS032B7DD02},
+	{"ls044q7dh01", LS044Q7DH01},
+	{},
+};
+MODULE_DEVICE_TABLE(spi, sharp_memory_ids);
+
+static const struct of_device_id sharp_memory_of_match[] = {
+	{.compatible = "sharp,ls010b7dh04", (void *)LS010B7DH04},
+	{.compatible = "sharp,ls011b7dh03", (void *)LS011B7DH03},
+	{.compatible = "sharp,ls012b7dd01", (void *)LS012B7DD01},
+	{.compatible = "sharp,ls013b7dh03", (void *)LS013B7DH03},
+	{.compatible = "sharp,ls013b7dh05", (void *)LS013B7DH05},
+	{.compatible = "sharp,ls018b7dh02", (void *)LS018B7DH02},
+	{.compatible = "sharp,ls027b7dh01", (void *)LS027B7DH01},
+	{.compatible = "sharp,ls027b7dh01a", (void *)LS027B7DH01},
+	{.compatible = "sharp,ls032b7dd02", (void *)LS032B7DD02},
+	{.compatible = "sharp,ls044q7dh01", (void *)LS044Q7DH01},
+	{},
+};
+MODULE_DEVICE_TABLE(of, sharp_memory_of_match);
+
+static const struct drm_display_mode sharp_memory_ls010b7dh04_mode = {
+	DRM_SIMPLE_MODE(128, 128, 18, 18),
+};
+
+static const struct drm_display_mode sharp_memory_ls011b7dh03_mode = {
+	DRM_SIMPLE_MODE(160, 68, 25, 10),
+};
+
+static const struct drm_display_mode sharp_memory_ls012b7dd01_mode = {
+	DRM_SIMPLE_MODE(184, 38, 29, 6),
+};
+
+static const struct drm_display_mode sharp_memory_ls013b7dh03_mode = {
+	DRM_SIMPLE_MODE(128, 128, 23, 23),
+};
+
+static const struct drm_display_mode sharp_memory_ls013b7dh05_mode = {
+	DRM_SIMPLE_MODE(144, 168, 20, 24),
+};
+
+static const struct drm_display_mode sharp_memory_ls018b7dh02_mode = {
+	DRM_SIMPLE_MODE(230, 303, 27, 36),
+};
+
+static const struct drm_display_mode sharp_memory_ls027b7dh01_mode = {
+	DRM_SIMPLE_MODE(400, 240, 58, 35),
+};
+
+static const struct drm_display_mode sharp_memory_ls032b7dd02_mode = {
+	DRM_SIMPLE_MODE(336, 536, 42, 68),
+};
+
+static const struct drm_display_mode sharp_memory_ls044q7dh01_mode = {
+	DRM_SIMPLE_MODE(320, 240, 89, 67),
+};
+
+static const uint32_t sharp_memory_formats[] = {
+	DRM_FORMAT_XRGB8888,
+};
+
+static int sharp_memory_pipe_init(struct drm_device *dev,
+				  struct sharp_memory_device *smd,
+				  const uint32_t *formats, unsigned int format_count,
+				  const uint64_t *format_modifiers)
+{
+	int ret;
+	struct drm_encoder *encoder = &smd->encoder;
+	struct drm_plane *plane = &smd->plane;
+	struct drm_crtc *crtc = &smd->crtc;
+	struct drm_connector *connector = &smd->connector;
+
+	drm_plane_helper_add(plane, &sharp_memory_plane_helper_funcs);
+	ret = drm_universal_plane_init(dev, plane, 0,
+				       &sharp_memory_plane_funcs,
+				       formats, format_count,
+				       format_modifiers,
+				       DRM_PLANE_TYPE_PRIMARY, NULL);
+	if (ret)
+		return ret;
+
+	drm_crtc_helper_add(crtc, &sharp_memory_crtc_helper_funcs);
+	ret = drm_crtc_init_with_planes(dev, crtc, plane, NULL,
+					&sharp_memory_crtc_funcs, NULL);
+	if (ret)
+		return ret;
+
+	encoder->possible_crtcs = drm_crtc_mask(crtc);
+	ret = drm_encoder_init(dev, encoder, &sharp_memory_encoder_funcs,
+			       DRM_MODE_ENCODER_NONE, NULL);
+	if (ret)
+		return ret;
+
+	ret = drm_connector_init(&smd->drm, &smd->connector,
+				 &sharp_memory_connector_funcs,
+				 DRM_MODE_CONNECTOR_SPI);
+	if (ret)
+		return ret;
+
+	drm_connector_helper_add(&smd->connector,
+				 &sharp_memory_connector_hfuncs);
+
+	return drm_connector_attach_encoder(connector, encoder);
+}
+
+static int sharp_memory_init_pwm_vcom_signal(struct sharp_memory_device *smd)
+{
+	struct pwm_state state;
+	struct device *dev = &smd->spi->dev;
+
+	smd->pwm_vcom_signal = devm_pwm_get(dev, NULL);
+	if (IS_ERR(smd->pwm_vcom_signal)) {
+		dev_err(dev, "Could not get pwm device\n");
+		return dev_err_probe(dev, -EINVAL, "Could not get pwm device\n");
+	}
+
+	pwm_init_state(smd->pwm_vcom_signal, &state);
+	state.enabled = false;
+	pwm_apply_state(smd->pwm_vcom_signal, &state);
+
+	return 0;
+}
+
+static int sharp_memory_probe(struct spi_device *spi)
+{
+	int ret;
+	struct device *dev;
+	struct sharp_memory_device *smd;
+	enum sharp_memory_model model;
+	struct drm_device *drm;
+	const char *vcom_mode_str;
+
+	ret = spi_setup(spi);
+	if (ret < 0)
+		return dev_err_probe(&spi->dev, ret, "Failed to setup spi device\n");
+
+	dev = &spi->dev;
+	if (!dev->coherent_dma_mask) {
+		ret = dma_coerce_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		if (ret)
+			return dev_err_probe(dev, ret, "Failed to set dma mask\n");
+	}
+
+	smd = devm_drm_dev_alloc(&spi->dev, &sharp_memory_drm_driver,
+				 struct sharp_memory_device, drm);
+
+	spi_set_drvdata(spi, smd);
+
+	smd->spi = spi;
+	drm = &smd->drm;
+	ret = drmm_mode_config_init(drm);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to initialize drm config\n");
+
+	smd->enable_gpio = devm_gpiod_get_optional(dev, "enable", GPIOD_OUT_HIGH);
+	if (smd->enable_gpio == NULL)
+		dev_warn(&spi->dev, "Enable gpio not defined\n");
+
+	/*
+	 * VCOM is a signal that prevents DC bias from being built up in
+	 * the panel resulting in pixels being forever stuck in one state.
+	 *
+	 * This driver supports three different methods to generate this
+	 * signal depending on EXTMODE pin:
+	 *
+	 * software (EXTMODE = L) - This mode uses a kthread to
+	 * periodically send a "maintain display" message to the display,
+	 * toggling the vcom bit on and off with each message
+	 *
+	 * external (EXTMODE = H) - This mode relies on an external
+	 * clock to generate the signal on the EXTCOMM pin
+	 *
+	 * pwm (EXTMODE = H) - This mode uses a pwm device to generate
+	 * the signal on the EXTCOMM pin
+	 *
+	 */
+	smd->vcom = 0;
+	if (device_property_read_string(&spi->dev, "vcom-mode", &vcom_mode_str))
+		return dev_err_probe(dev, -EINVAL,
+				     "Unable to find vcom-mode node in device tree\n");
+
+	if (!strcmp("software", vcom_mode_str)) {
+		smd->vcom_mode = SHARP_MEMORY_SOFTWARE_VCOM;
+
+	} else if (!strcmp("external", vcom_mode_str)) {
+		smd->vcom_mode = SHARP_MEMORY_EXTERNAL_VCOM;
+
+	} else if (!strcmp("pwm", vcom_mode_str)) {
+		smd->vcom_mode = SHARP_MEMORY_PWM_VCOM;
+		ret = sharp_memory_init_pwm_vcom_signal(smd);
+		if (ret)
+			return dev_err_probe(dev, ret,
+					     "Failed to initialize external COM signal\n");
+	} else {
+		return dev_err_probe(dev, -EINVAL, "Invalid value set for vcom-mode\n");
+	}
+
+	drm->mode_config.funcs = &sharp_memory_mode_config_funcs;
+
+	/* Set the DRM display mode depending on panel model */
+	model = (uintptr_t)spi_get_device_match_data(spi);
+	switch (model) {
+	case LS013B7DH03:
+		smd->mode = &sharp_memory_ls013b7dh03_mode;
+		break;
+
+	case LS010B7DH04:
+		smd->mode = &sharp_memory_ls010b7dh04_mode;
+		break;
+
+	case LS011B7DH03:
+		smd->mode = &sharp_memory_ls011b7dh03_mode;
+		break;
+
+	case LS012B7DD01:
+		smd->mode = &sharp_memory_ls012b7dd01_mode;
+		break;
+
+	case LS013B7DH05:
+		smd->mode = &sharp_memory_ls013b7dh05_mode;
+		break;
+
+	case LS018B7DH02:
+		smd->mode = &sharp_memory_ls018b7dh02_mode;
+		break;
+
+	case LS027B7DH01:
+		fallthrough;
+	case LS027B7DH01A:
+		smd->mode = &sharp_memory_ls027b7dh01_mode;
+		break;
+
+	case LS032B7DD02:
+		smd->mode = &sharp_memory_ls032b7dd02_mode;
+		break;
+
+	case LS044Q7DH01:
+		smd->mode = &sharp_memory_ls044q7dh01_mode;
+		break;
+
+	default:
+		return dev_err_probe(&spi->dev, -EINVAL, "Invalid DRM display mode\n");
+	}
+
+	smd->pitch = (SHARP_ADDR_PERIOD + smd->mode->hdisplay + SHARP_DUMMY_PERIOD) / 8;
+	smd->tx_buffer_size = (SHARP_MODE_PERIOD +
+			       (SHARP_ADDR_PERIOD + (smd->mode->hdisplay) + SHARP_DUMMY_PERIOD) *
+			       smd->mode->vdisplay) / 8;
+
+	smd->tx_buffer = devm_kzalloc(&spi->dev, smd->tx_buffer_size, GFP_KERNEL);
+	if (!smd->tx_buffer)
+		return dev_err_probe(&spi->dev, -ENOMEM, "Unable to alloc tx buffer\n");
+
+	mutex_init(&smd->tx_mutex);
+
+	drm->mode_config.min_width = smd->mode->hdisplay;
+	drm->mode_config.max_width = smd->mode->hdisplay;
+	drm->mode_config.min_height = smd->mode->vdisplay;
+	drm->mode_config.max_height = smd->mode->vdisplay;
+
+	ret = sharp_memory_pipe_init(drm, smd,
+				     sharp_memory_formats,
+				     ARRAY_SIZE(sharp_memory_formats),
+				     NULL);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to initialize display pipeline.\n");
+
+	drm_plane_enable_fb_damage_clips(&smd->plane);
+	drm_mode_config_reset(drm);
+
+	ret = drm_dev_register(drm, 0);
+	if (ret)
+		return dev_err_probe(dev, ret, "Failed to register drm device.\n");
+
+	drm_fbdev_dma_setup(drm, 0);
+
+	return 0;
+}
+
+static void sharp_memory_remove(struct spi_device *spi)
+{
+	struct sharp_memory_device *smd = spi_get_drvdata(spi);
+
+	drm_dev_unplug(&smd->drm);
+	drm_atomic_helper_shutdown(&smd->drm);
+}
+
+static struct spi_driver sharp_memory_spi_driver = {
+	.driver = {
+		.name = "sharp_memory",
+		.of_match_table = sharp_memory_of_match,
+	},
+	.probe = sharp_memory_probe,
+	.remove = sharp_memory_remove,
+	.id_table = sharp_memory_ids,
+};
+module_spi_driver(sharp_memory_spi_driver);
+
+MODULE_AUTHOR("Alex Lanzano <lanzano.alex@gmail.com>");
+MODULE_DESCRIPTION("SPI Protocol driver for the sharp_memory display");
+MODULE_LICENSE("GPL");