@@ -27,7 +27,3 @@ All temperature values are given in degrees Celsius. Resolution
is 1.0 degree for the local temperature and for the remote temperature.
Only the external sensor has high and low limits.
-
-The max1619 driver will not update its values more frequently than every
-other second; reading them more often will do no harm, but will return
-'old' values.
@@ -17,10 +17,8 @@
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/init.h>
-#include <linux/jiffies.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/slab.h>
+#include <linux/regmap.h>
#include <linux/sysfs.h>
static const unsigned short normal_i2c[] = {
@@ -30,27 +28,17 @@ static const unsigned short normal_i2c[] = {
* The MAX1619 registers
*/
-#define MAX1619_REG_R_MAN_ID 0xFE
-#define MAX1619_REG_R_CHIP_ID 0xFF
-#define MAX1619_REG_R_CONFIG 0x03
-#define MAX1619_REG_W_CONFIG 0x09
-#define MAX1619_REG_R_CONVRATE 0x04
-#define MAX1619_REG_W_CONVRATE 0x0A
-#define MAX1619_REG_R_STATUS 0x02
-#define MAX1619_REG_R_LOCAL_TEMP 0x00
-#define MAX1619_REG_R_REMOTE_TEMP 0x01
-#define MAX1619_REG_R_REMOTE_HIGH 0x07
-#define MAX1619_REG_W_REMOTE_HIGH 0x0D
-#define MAX1619_REG_R_REMOTE_LOW 0x08
-#define MAX1619_REG_W_REMOTE_LOW 0x0E
-#define MAX1619_REG_R_REMOTE_CRIT 0x10
-#define MAX1619_REG_W_REMOTE_CRIT 0x12
-#define MAX1619_REG_R_TCRIT_HYST 0x11
-#define MAX1619_REG_W_TCRIT_HYST 0x13
-
-/*
- * Conversions
- */
+#define MAX1619_REG_LOCAL_TEMP 0x00
+#define MAX1619_REG_REMOTE_TEMP 0x01
+#define MAX1619_REG_STATUS 0x02
+#define MAX1619_REG_CONFIG 0x03
+#define MAX1619_REG_CONVRATE 0x04
+#define MAX1619_REG_REMOTE_HIGH 0x07
+#define MAX1619_REG_REMOTE_LOW 0x08
+#define MAX1619_REG_REMOTE_CRIT 0x10
+#define MAX1619_REG_REMOTE_CRIT_HYST 0x11
+#define MAX1619_REG_MAN_ID 0xFE
+#define MAX1619_REG_CHIP_ID 0xFF
enum temp_index {
t_input1 = 0,
@@ -66,63 +54,15 @@ enum temp_index {
* Client data (each client gets its own)
*/
-struct max1619_data {
- struct i2c_client *client;
- struct mutex update_lock;
- bool valid; /* false until following fields are valid */
- unsigned long last_updated; /* in jiffies */
-
- /* registers values */
- u8 temp[t_num_regs]; /* index with enum temp_index */
- u8 alarms;
+static const u8 regs[t_num_regs] = {
+ [t_input1] = MAX1619_REG_LOCAL_TEMP,
+ [t_input2] = MAX1619_REG_REMOTE_TEMP,
+ [t_low2] = MAX1619_REG_REMOTE_LOW,
+ [t_high2] = MAX1619_REG_REMOTE_HIGH,
+ [t_crit2] = MAX1619_REG_REMOTE_CRIT,
+ [t_hyst2] = MAX1619_REG_REMOTE_CRIT_HYST,
};
-static const u8 regs_read[t_num_regs] = {
- [t_input1] = MAX1619_REG_R_LOCAL_TEMP,
- [t_input2] = MAX1619_REG_R_REMOTE_TEMP,
- [t_low2] = MAX1619_REG_R_REMOTE_LOW,
- [t_high2] = MAX1619_REG_R_REMOTE_HIGH,
- [t_crit2] = MAX1619_REG_R_REMOTE_CRIT,
- [t_hyst2] = MAX1619_REG_R_TCRIT_HYST,
-};
-
-static const u8 regs_write[t_num_regs] = {
- [t_low2] = MAX1619_REG_W_REMOTE_LOW,
- [t_high2] = MAX1619_REG_W_REMOTE_HIGH,
- [t_crit2] = MAX1619_REG_W_REMOTE_CRIT,
- [t_hyst2] = MAX1619_REG_W_TCRIT_HYST,
-};
-
-static struct max1619_data *max1619_update_device(struct device *dev)
-{
- struct max1619_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
- int config, i;
-
- mutex_lock(&data->update_lock);
-
- if (time_after(jiffies, data->last_updated + HZ * 2) || !data->valid) {
- dev_dbg(&client->dev, "Updating max1619 data.\n");
- for (i = 0; i < t_num_regs; i++)
- data->temp[i] = i2c_smbus_read_byte_data(client,
- regs_read[i]);
- data->alarms = i2c_smbus_read_byte_data(client,
- MAX1619_REG_R_STATUS);
- /* If OVERT polarity is low, reverse alarm bit */
- config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
- if (!(config & 0x20))
- data->alarms ^= 0x02;
- data->alarms &= 0x1e;
-
- data->last_updated = jiffies;
- data->valid = true;
- }
-
- mutex_unlock(&data->update_lock);
-
- return data;
-}
-
/*
* Sysfs stuff
*/
@@ -131,9 +71,15 @@ static ssize_t temp_show(struct device *dev, struct device_attribute *devattr,
char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct max1619_data *data = max1619_update_device(dev);
+ struct regmap *regmap = dev_get_drvdata(dev);
+ u32 temp;
+ int ret;
- return sprintf(buf, "%d\n", sign_extend(data->temp[attr->index], 7) * 1000);
+ ret = regmap_read(regmap, regs[attr->index], &temp);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%d\n", sign_extend32(temp, 7) * 1000);
}
static ssize_t temp_store(struct device *dev,
@@ -141,34 +87,61 @@ static ssize_t temp_store(struct device *dev,
size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
- struct max1619_data *data = dev_get_drvdata(dev);
- struct i2c_client *client = data->client;
+ struct regmap *regmap = dev_get_drvdata(dev);
long val;
int err = kstrtol(buf, 10, &val);
if (err)
return err;
- mutex_lock(&data->update_lock);
- data->temp[attr->index] = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
- i2c_smbus_write_byte_data(client, regs_write[attr->index],
- data->temp[attr->index]);
- mutex_unlock(&data->update_lock);
+ val = DIV_ROUND_CLOSEST(clamp_val(val, -128000, 127000), 1000);
+ err = regmap_write(regmap, regs[attr->index], val);
+ if (err < 0)
+ return err;
return count;
}
+static int get_alarms(struct regmap *regmap)
+{
+ static u32 regs[2] = { MAX1619_REG_STATUS, MAX1619_REG_CONFIG };
+ u8 regdata[2];
+ int ret;
+
+ ret = regmap_multi_reg_read(regmap, regs, regdata, 2);
+ if (ret)
+ return ret;
+
+ /* OVERT status bit may be reversed */
+ if (!(regdata[1] & 0x20))
+ regdata[0] ^= 0x02;
+
+ return regdata[0] & 0x1e;
+}
+
static ssize_t alarms_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
- struct max1619_data *data = max1619_update_device(dev);
- return sprintf(buf, "%d\n", data->alarms);
+ struct regmap *regmap = dev_get_drvdata(dev);
+ int alarms;
+
+ alarms = get_alarms(regmap);
+ if (alarms < 0)
+ return alarms;
+
+ return sprintf(buf, "%d\n", alarms);
}
static ssize_t alarm_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
int bitnr = to_sensor_dev_attr(attr)->index;
- struct max1619_data *data = max1619_update_device(dev);
- return sprintf(buf, "%d\n", (data->alarms >> bitnr) & 1);
+ struct regmap *regmap = dev_get_drvdata(dev);
+ int alarms;
+
+ alarms = get_alarms(regmap);
+ if (alarms < 0)
+ return alarms;
+
+ return sprintf(buf, "%d\n", (alarms >> bitnr) & 1);
}
static SENSOR_DEVICE_ATTR_RO(temp1_input, temp, t_input1);
@@ -212,9 +185,9 @@ static int max1619_detect(struct i2c_client *client,
return -ENODEV;
/* detection */
- reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
- reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONVRATE);
- reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_R_STATUS);
+ reg_config = i2c_smbus_read_byte_data(client, MAX1619_REG_CONFIG);
+ reg_convrate = i2c_smbus_read_byte_data(client, MAX1619_REG_CONVRATE);
+ reg_status = i2c_smbus_read_byte_data(client, MAX1619_REG_STATUS);
if ((reg_config & 0x03) != 0x00
|| reg_convrate > 0x07 || (reg_status & 0x61) != 0x00) {
dev_dbg(&adapter->dev, "MAX1619 detection failed at 0x%02x\n",
@@ -223,8 +196,8 @@ static int max1619_detect(struct i2c_client *client,
}
/* identification */
- man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_MAN_ID);
- chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CHIP_ID);
+ man_id = i2c_smbus_read_byte_data(client, MAX1619_REG_MAN_ID);
+ chip_id = i2c_smbus_read_byte_data(client, MAX1619_REG_CHIP_ID);
if (man_id != 0x4D || chip_id != 0x04) {
dev_info(&adapter->dev,
"Unsupported chip (man_id=0x%02X, chip_id=0x%02X).\n",
@@ -237,40 +210,82 @@ static int max1619_detect(struct i2c_client *client,
return 0;
}
-static void max1619_init_client(struct i2c_client *client)
+static int max1619_init_chip(struct regmap *regmap)
{
- u8 config;
+ int ret;
- /*
- * Start the conversions.
- */
- i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONVRATE,
- 5); /* 2 Hz */
- config = i2c_smbus_read_byte_data(client, MAX1619_REG_R_CONFIG);
- if (config & 0x40)
- i2c_smbus_write_byte_data(client, MAX1619_REG_W_CONFIG,
- config & 0xBF); /* run */
+ ret = regmap_write(regmap, MAX1619_REG_CONVRATE, 5); /* 2 Hz */
+ if (ret)
+ return ret;
+
+ /* Start conversions */
+ return regmap_set_bits(regmap, MAX1619_REG_CONFIG, 0x40);
}
-static int max1619_probe(struct i2c_client *new_client)
+/* regmap */
+
+static int max1619_reg_read(void *context, unsigned int reg, unsigned int *val)
{
- struct max1619_data *data;
+ int ret;
+
+ ret = i2c_smbus_read_byte_data(context, reg);
+ if (ret < 0)
+ return ret;
+
+ *val = ret;
+ return 0;
+}
+
+static int max1619_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+ int offset = reg < MAX1619_REG_REMOTE_CRIT ? 6 : 2;
+
+ return i2c_smbus_write_byte_data(context, reg + offset, val);
+}
+
+static bool max1619_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ return reg <= MAX1619_REG_STATUS;
+}
+
+static bool max1619_regmap_is_writeable(struct device *dev, unsigned int reg)
+{
+ return reg > MAX1619_REG_STATUS && reg <= MAX1619_REG_REMOTE_CRIT_HYST;
+}
+
+static const struct regmap_config max1619_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX1619_REG_REMOTE_CRIT_HYST,
+ .cache_type = REGCACHE_MAPLE,
+ .volatile_reg = max1619_regmap_is_volatile,
+ .writeable_reg = max1619_regmap_is_writeable,
+};
+
+static const struct regmap_bus max1619_regmap_bus = {
+ .reg_write = max1619_reg_write,
+ .reg_read = max1619_reg_read,
+};
+
+static int max1619_probe(struct i2c_client *client)
+{
+ struct device *dev = &client->dev;
struct device *hwmon_dev;
+ struct regmap *regmap;
+ int ret;
- data = devm_kzalloc(&new_client->dev, sizeof(struct max1619_data),
- GFP_KERNEL);
- if (!data)
- return -ENOMEM;
+ regmap = devm_regmap_init(dev, &max1619_regmap_bus, client,
+ &max1619_regmap_config);
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
- data->client = new_client;
- mutex_init(&data->update_lock);
+ ret = max1619_init_chip(regmap);
+ if (ret)
+ return ret;
- /* Initialize the MAX1619 chip */
- max1619_init_client(new_client);
-
- hwmon_dev = devm_hwmon_device_register_with_groups(&new_client->dev,
- new_client->name,
- data,
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev,
+ client->name,
+ regmap,
max1619_groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
Use regmap for local caching, to hide register read/write address differences, and for multi-byte operations. With this change, the driver specific lock is no longer necessary. While at it, check errors seen when initializing the chip and bail out if chip initialization fails. Signed-off-by: Guenter Roeck <linux@roeck-us.net> --- v2: Split masking of 'alarms' attribute into separate patch Initialize chip to match original code Documentation/hwmon/max1619.rst | 4 - drivers/hwmon/max1619.c | 259 +++++++++++++++++--------------- 2 files changed, 137 insertions(+), 126 deletions(-)