| Message ID | 20240719181041.49545-10-philmd@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | hw/char/pl011: Implement TX (async) FIFO to avoid blocking the main loop | expand |
On Fri, 19 Jul 2024 at 19:11, Philippe Mathieu-Daudé <philmd@linaro.org> wrote: > > We weren't enabling the PL011 TX UART before using it > on the raspi and virt machines. Update the ASM code > prefixing: > > *UART_CTRL = UART_ENABLE | TX_ENABLE; > > to: > > while (true) { > *UART_DATA = 'T'; > } > > Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> > --- > tests/qtest/boot-serial-test.c | 15 ++++++++++----- > 1 file changed, 10 insertions(+), 5 deletions(-) > > diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c > index 3b92fa5d50..5cb309ccf0 100644 > --- a/tests/qtest/boot-serial-test.c > +++ b/tests/qtest/boot-serial-test.c > @@ -70,18 +70,23 @@ static const uint8_t kernel_plml605[] = { > }; > > static const uint8_t bios_raspi2[] = { > - 0x08, 0x30, 0x9f, 0xe5, /* ldr r3,[pc,#8] Get base */ > + 0x10, 0x30, 0x9f, 0xe5, /* ldr r3,[pc,#8] Get base */ The instruction bytes have changed but the disassembly comment has not... > + 0x10, 0x20, 0x9f, 0xe5, /* ldr r2,[pc,#8] Get CR */ > + 0xb0, 0x23, 0xc3, 0xe1, /* strh r2,[r3, #48] Set CR */ > 0x54, 0x20, 0xa0, 0xe3, /* mov r2,#'T' */ > - 0x00, 0x20, 0xc3, 0xe5, /* strb r2,[r3] */ > - 0xfb, 0xff, 0xff, 0xea, /* b loop */ > + 0x00, 0x20, 0xc3, 0xe5, /* strb r2,[r3] loop: */ This placement of the "loop:" label is odd -- usually the label goes before the instruction that a branch to the label will start executing at. > + 0xfd, 0xff, 0xff, 0xea, /* b loop */ Here also the bytes changed but not the disassembly. Since 'b' is a relative branch, why does the offset change? > 0x00, 0x10, 0x20, 0x3f, /* 0x3f201000 = UART0 base addr */ > + 0x01, 0x01, 0x00, 0x00, /* 0x101 = CR UARTEN|TXE */ > }; > > static const uint8_t kernel_aarch64[] = { > - 0x81, 0x0a, 0x80, 0x52, /* mov w1, #0x54 */ > 0x02, 0x20, 0xa1, 0xd2, /* mov x2, #0x9000000 */ > + 0x21, 0x20, 0x80, 0x52, /* mov w1, #0x101 */ > + 0x41, 0x60, 0x00, 0x79, /* strh w1, [x2, #48] */ > + 0x81, 0x0a, 0x80, 0x52, /* mov w1, #0x54 */ > 0x41, 0x00, 0x00, 0x39, /* strb w1, [x2] */ > - 0xfd, 0xff, 0xff, 0x17, /* b -12 (loop) */ > + 0xff, 0xff, 0xff, 0x17, /* b -4 (loop) */ Another unexplained offset change here. > }; > > static const uint8_t kernel_nrf51[] = { > -- > 2.41.0 thanks -- PMM
diff --git a/tests/qtest/boot-serial-test.c b/tests/qtest/boot-serial-test.c index 3b92fa5d50..5cb309ccf0 100644 --- a/tests/qtest/boot-serial-test.c +++ b/tests/qtest/boot-serial-test.c @@ -70,18 +70,23 @@ static const uint8_t kernel_plml605[] = { }; static const uint8_t bios_raspi2[] = { - 0x08, 0x30, 0x9f, 0xe5, /* ldr r3,[pc,#8] Get base */ + 0x10, 0x30, 0x9f, 0xe5, /* ldr r3,[pc,#8] Get base */ + 0x10, 0x20, 0x9f, 0xe5, /* ldr r2,[pc,#8] Get CR */ + 0xb0, 0x23, 0xc3, 0xe1, /* strh r2,[r3, #48] Set CR */ 0x54, 0x20, 0xa0, 0xe3, /* mov r2,#'T' */ - 0x00, 0x20, 0xc3, 0xe5, /* strb r2,[r3] */ - 0xfb, 0xff, 0xff, 0xea, /* b loop */ + 0x00, 0x20, 0xc3, 0xe5, /* strb r2,[r3] loop: */ + 0xfd, 0xff, 0xff, 0xea, /* b loop */ 0x00, 0x10, 0x20, 0x3f, /* 0x3f201000 = UART0 base addr */ + 0x01, 0x01, 0x00, 0x00, /* 0x101 = CR UARTEN|TXE */ }; static const uint8_t kernel_aarch64[] = { - 0x81, 0x0a, 0x80, 0x52, /* mov w1, #0x54 */ 0x02, 0x20, 0xa1, 0xd2, /* mov x2, #0x9000000 */ + 0x21, 0x20, 0x80, 0x52, /* mov w1, #0x101 */ + 0x41, 0x60, 0x00, 0x79, /* strh w1, [x2, #48] */ + 0x81, 0x0a, 0x80, 0x52, /* mov w1, #0x54 */ 0x41, 0x00, 0x00, 0x39, /* strb w1, [x2] */ - 0xfd, 0xff, 0xff, 0x17, /* b -12 (loop) */ + 0xff, 0xff, 0xff, 0x17, /* b -4 (loop) */ }; static const uint8_t kernel_nrf51[] = {
We weren't enabling the PL011 TX UART before using it on the raspi and virt machines. Update the ASM code prefixing: *UART_CTRL = UART_ENABLE | TX_ENABLE; to: while (true) { *UART_DATA = 'T'; } Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> --- tests/qtest/boot-serial-test.c | 15 ++++++++++----- 1 file changed, 10 insertions(+), 5 deletions(-)