| Message ID | 20240729065603.1986074-1-varshini.rajendran@microchip.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for sam9x7 SoC family | expand |
On 29.07.2024 09:56, Varshini Rajendran wrote: > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added > > Changes in v6: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Reverted the IRQ patch to that of version 3 of the same series > - All the specific changes are captured in the corresponding patches > > Changes in v5: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Dropped applied patches from the series > - Addressed the ABI breakage reported in the IRQ patch > - All the specific changes are captured in the corresponding patches > > Changes in v4: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Dropped applied patches from the series > - Added pwm node and related dt binding documentation > - Added support for exporting some clocks to DT > - Dropped USB related patches and changes. See NOTE. > - All the specific changes are captured in the corresponding patches > > NOTE: Owing to the discussion here > https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/ > the USB related changes are dropped from this series in order to enable > us to work on the mentioned issues before adding new compatibles as > said. The issues/warnings will be addressed in subsequent patches. > After which the USB related support for sam9x7 SoCs will be added. Hope > this works out fine. > > Changes in v3: > -------------- > > - Fixed the DT documentation errors pointed out in v2. > - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted > according to sam9x7 correctly. > - Picked by the previously missed tags. > - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names > property" as the warning was not found while validating DT-schema for > at91-sam9x75_curiosity.dtb. > - Dropped redundant words in the commit message. > - Fixed the CHECK_DTBS warnings validated against > at91-sam9x75_curiosity.dtb. > - Renamed dt nodes according to naming convention. > - Dropped unwanted status property in dts. > - Removed nodes that are not in use from the board dts. > - Removed spi DT doc patch from the series as it was already applied > and a fix patch was applied subsequently. Added a patch to remove the > compatible to adapt sam9x7. > - Added sam9x7 compatibles in usb dt documentation. > > > Changes in v2: > -------------- > > - Added sam9x7 specific compatibles in DT with fallbacks > - Documented all the newly added DT compatible strings > - Added device tree for the target board sam9x75 curiosity and > documented the same in the DT bindings documentation > - Removed the dt nodes that are not supported at the moment > - Removed the configs added by previous version that are not supported > at the moment > - Fixed all the corrections in the commit message > - Changed all the instances of copyright year to 2023 > - Added sam9x7 flag in PIT64B configuration > - Moved macro definitions to header file > - Added another divider in mck characteristics in the pmc driver > - Fixed the memory leak in the pmc driver > - Dropped patches that are no longer needed > - Picked up Acked-by and Reviewed-by tags > > > Hari Prasath (1): > irqchip/atmel-aic5: Add support for sam9x7 aic > > Varshini Rajendran (26): > dt-bindings: atmel-sysreg: add sam9x7 > dt-bindings: mfd: syscon: add microchip's sam9x7 sfr > dt-bindings: atmel-ssc: add microchip,sam9x7-ssc > dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7. > dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible > ARM: at91: pm: add support for sam9x7 SoC family > ARM: at91: pm: add sam9x7 SoC init config > ARM: at91: add support in SoC driver for new sam9x7 > dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 > dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller > clk: at91: clk-sam9x60-pll: re-factor to support individual core freq > outputs > clk: at91: sam9x7: add support for HW PLL freq dividers > clk: at91: sama7g5: move mux table macros to header file > dt-bindings: clock: at91: Allow PLLs to be exported and referenced in > DT > clk: at91: sam9x7: add sam9x7 pmc driver > dt-bindings: interrupt-controller: Add support for sam9x7 aic > power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 > power: reset: at91-reset: add reset support for sam9x7 SoC > power: reset: at91-reset: add sdhwc support for sam9x7 SoC > dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 > dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 > ARM: at91: Kconfig: add config flag for SAM9X7 SoC > ARM: configs: at91: enable config flags for sam9x7 SoC family > ARM: dts: at91: sam9x7: add device tree for SoC > dt-bindings: arm: add sam9x75 curiosity board > ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board > > .../devicetree/bindings/arm/atmel-at91.yaml | 6 + > .../devicetree/bindings/arm/atmel-sysregs.txt | 6 +- > .../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 + > .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +- > .../interrupt-controller/atmel,aic.yaml | 1 + > .../devicetree/bindings/mfd/syscon.yaml | 188 +-- > .../devicetree/bindings/misc/atmel-ssc.txt | 1 + > .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + > .../reset/atmel,at91sam9260-reset.yaml | 4 + > .../bindings/serial/atmel,at91-usart.yaml | 9 +- > .../soc/microchip/atmel,at91rm9200-tcb.yaml | 20 +- > arch/arm/boot/dts/microchip/Makefile | 3 + > .../dts/microchip/at91-sam9x75_curiosity.dts | 312 +++++ > arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++ Hi, Sorry for disturbing, I don't see the patch where you add arch/arm/boot/dts/microchip/sam9x7.dtsi In linux-next this file is not applied yet: :~$ find arch/arm/boot/dts/microchip | grep -i sam9x7.dtsi | wc -l 0 Best regards, Andrei > arch/arm/configs/at91_dt_defconfig | 1 + > arch/arm/mach-at91/Kconfig | 22 +- > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/generic.h | 2 + > arch/arm/mach-at91/pm.c | 29 + > arch/arm/mach-at91/sam9x7.c | 33 + > drivers/clk/at91/Makefile | 1 + > drivers/clk/at91/clk-sam9x60-pll.c | 42 +- > drivers/clk/at91/pmc.h | 18 + > drivers/clk/at91/sam9x60.c | 7 + > drivers/clk/at91/sam9x7.c | 946 +++++++++++++ > drivers/clk/at91/sama7g5.c | 42 +- > drivers/irqchip/irq-atmel-aic5.c | 10 + > drivers/power/reset/Kconfig | 4 +- > drivers/power/reset/at91-sama5d2_shdwc.c | 1 + > drivers/soc/atmel/soc.c | 23 + > drivers/soc/atmel/soc.h | 9 + > include/dt-bindings/clock/at91.h | 4 + > 32 files changed, 2840 insertions(+), 140 deletions(-) > create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi > create mode 100644 arch/arm/mach-at91/sam9x7.c > create mode 100644 drivers/clk/at91/sam9x7.c >
On 29/07/24 1:47 pm, Andrei Simion - M76677 wrote: > On 29.07.2024 09:56, Varshini Rajendran wrote: >> This patch series adds support for the new SoC family - sam9x7. >> - The device tree, configs and drivers are added >> - Clock driver for sam9x7 is added >> - Support for basic peripherals is added >> - Target board SAM9X75 Curiosity is added >> >> Changes in v6: >> -------------- >> >> - Addressed all the review comments in the patches >> - Picked up all Acked-by and Reviewed-by tags >> - Reverted the IRQ patch to that of version 3 of the same series >> - All the specific changes are captured in the corresponding patches >> >> Changes in v5: >> -------------- >> >> - Addressed all the review comments in the patches >> - Picked up all Acked-by and Reviewed-by tags >> - Dropped applied patches from the series >> - Addressed the ABI breakage reported in the IRQ patch >> - All the specific changes are captured in the corresponding patches >> >> Changes in v4: >> -------------- >> >> - Addressed all the review comments in the patches >> - Picked up all Acked-by and Reviewed-by tags >> - Dropped applied patches from the series >> - Added pwm node and related dt binding documentation >> - Added support for exporting some clocks to DT >> - Dropped USB related patches and changes. See NOTE. >> - All the specific changes are captured in the corresponding patches >> >> NOTE: Owing to the discussion here >> https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/ >> the USB related changes are dropped from this series in order to enable >> us to work on the mentioned issues before adding new compatibles as >> said. The issues/warnings will be addressed in subsequent patches. >> After which the USB related support for sam9x7 SoCs will be added. Hope >> this works out fine. >> >> Changes in v3: >> -------------- >> >> - Fixed the DT documentation errors pointed out in v2. >> - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted >> according to sam9x7 correctly. >> - Picked by the previously missed tags. >> - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names >> property" as the warning was not found while validating DT-schema for >> at91-sam9x75_curiosity.dtb. >> - Dropped redundant words in the commit message. >> - Fixed the CHECK_DTBS warnings validated against >> at91-sam9x75_curiosity.dtb. >> - Renamed dt nodes according to naming convention. >> - Dropped unwanted status property in dts. >> - Removed nodes that are not in use from the board dts. >> - Removed spi DT doc patch from the series as it was already applied >> and a fix patch was applied subsequently. Added a patch to remove the >> compatible to adapt sam9x7. >> - Added sam9x7 compatibles in usb dt documentation. >> >> >> Changes in v2: >> -------------- >> >> - Added sam9x7 specific compatibles in DT with fallbacks >> - Documented all the newly added DT compatible strings >> - Added device tree for the target board sam9x75 curiosity and >> documented the same in the DT bindings documentation >> - Removed the dt nodes that are not supported at the moment >> - Removed the configs added by previous version that are not supported >> at the moment >> - Fixed all the corrections in the commit message >> - Changed all the instances of copyright year to 2023 >> - Added sam9x7 flag in PIT64B configuration >> - Moved macro definitions to header file >> - Added another divider in mck characteristics in the pmc driver >> - Fixed the memory leak in the pmc driver >> - Dropped patches that are no longer needed >> - Picked up Acked-by and Reviewed-by tags >> >> >> Hari Prasath (1): >> irqchip/atmel-aic5: Add support for sam9x7 aic >> >> Varshini Rajendran (26): >> dt-bindings: atmel-sysreg: add sam9x7 >> dt-bindings: mfd: syscon: add microchip's sam9x7 sfr >> dt-bindings: atmel-ssc: add microchip,sam9x7-ssc >> dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7. >> dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible >> ARM: at91: pm: add support for sam9x7 SoC family >> ARM: at91: pm: add sam9x7 SoC init config >> ARM: at91: add support in SoC driver for new sam9x7 >> dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 >> dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller >> clk: at91: clk-sam9x60-pll: re-factor to support individual core freq >> outputs >> clk: at91: sam9x7: add support for HW PLL freq dividers >> clk: at91: sama7g5: move mux table macros to header file >> dt-bindings: clock: at91: Allow PLLs to be exported and referenced in >> DT >> clk: at91: sam9x7: add sam9x7 pmc driver >> dt-bindings: interrupt-controller: Add support for sam9x7 aic >> power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 >> power: reset: at91-reset: add reset support for sam9x7 SoC >> power: reset: at91-reset: add sdhwc support for sam9x7 SoC >> dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 >> dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 >> ARM: at91: Kconfig: add config flag for SAM9X7 SoC >> ARM: configs: at91: enable config flags for sam9x7 SoC family >> ARM: dts: at91: sam9x7: add device tree for SoC >> dt-bindings: arm: add sam9x75 curiosity board >> ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board >> >> .../devicetree/bindings/arm/atmel-at91.yaml | 6 + >> .../devicetree/bindings/arm/atmel-sysregs.txt | 6 +- >> .../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 + >> .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +- >> .../interrupt-controller/atmel,aic.yaml | 1 + >> .../devicetree/bindings/mfd/syscon.yaml | 188 +-- >> .../devicetree/bindings/misc/atmel-ssc.txt | 1 + >> .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + >> .../reset/atmel,at91sam9260-reset.yaml | 4 + >> .../bindings/serial/atmel,at91-usart.yaml | 9 +- >> .../soc/microchip/atmel,at91rm9200-tcb.yaml | 20 +- >> arch/arm/boot/dts/microchip/Makefile | 3 + >> .../dts/microchip/at91-sam9x75_curiosity.dts | 312 +++++ >> arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++ > > Hi, > > Sorry for disturbing, I don't see the patch where you add arch/arm/boot/dts/microchip/sam9x7.dtsi > In linux-next this file is not applied yet: > :~$ find arch/arm/boot/dts/microchip | grep -i sam9x7.dtsi | wc -l > 0 > Hi Andrei, I don't quite get your query. I am answering in a presumption that you are enquiring about the sam9x7.dtsi file presence. This file arch/arm/boot/dts/microchip/sam9x7.dtsi is being added in this very series by patch 25/27. It is not yet applied, hence will not be available in any of the upstream repos. (P.S.: Sorry for the noise and the wide audience) > Best regards, > Andrei > >> arch/arm/configs/at91_dt_defconfig | 1 + >> arch/arm/mach-at91/Kconfig | 22 +- >> arch/arm/mach-at91/Makefile | 1 + >> arch/arm/mach-at91/generic.h | 2 + >> arch/arm/mach-at91/pm.c | 29 + >> arch/arm/mach-at91/sam9x7.c | 33 + >> drivers/clk/at91/Makefile | 1 + >> drivers/clk/at91/clk-sam9x60-pll.c | 42 +- >> drivers/clk/at91/pmc.h | 18 + >> drivers/clk/at91/sam9x60.c | 7 + >> drivers/clk/at91/sam9x7.c | 946 +++++++++++++ >> drivers/clk/at91/sama7g5.c | 42 +- >> drivers/irqchip/irq-atmel-aic5.c | 10 + >> drivers/power/reset/Kconfig | 4 +- >> drivers/power/reset/at91-sama5d2_shdwc.c | 1 + >> drivers/soc/atmel/soc.c | 23 + >> drivers/soc/atmel/soc.h | 9 + >> include/dt-bindings/clock/at91.h | 4 + >> 32 files changed, 2840 insertions(+), 140 deletions(-) >> create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts >> create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi >> create mode 100644 arch/arm/mach-at91/sam9x7.c >> create mode 100644 drivers/clk/at91/sam9x7.c >>
On Mon, 29 Jul 2024 12:26:03 +0530, Varshini Rajendran wrote: > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added > > Changes in v6: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Reverted the IRQ patch to that of version 3 of the same series > - All the specific changes are captured in the corresponding patches > > Changes in v5: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Dropped applied patches from the series > - Addressed the ABI breakage reported in the IRQ patch > - All the specific changes are captured in the corresponding patches > > Changes in v4: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Dropped applied patches from the series > - Added pwm node and related dt binding documentation > - Added support for exporting some clocks to DT > - Dropped USB related patches and changes. See NOTE. > - All the specific changes are captured in the corresponding patches > > NOTE: Owing to the discussion here > https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/ > the USB related changes are dropped from this series in order to enable > us to work on the mentioned issues before adding new compatibles as > said. The issues/warnings will be addressed in subsequent patches. > After which the USB related support for sam9x7 SoCs will be added. Hope > this works out fine. > > Changes in v3: > -------------- > > - Fixed the DT documentation errors pointed out in v2. > - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted > according to sam9x7 correctly. > - Picked by the previously missed tags. > - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names > property" as the warning was not found while validating DT-schema for > at91-sam9x75_curiosity.dtb. > - Dropped redundant words in the commit message. > - Fixed the CHECK_DTBS warnings validated against > at91-sam9x75_curiosity.dtb. > - Renamed dt nodes according to naming convention. > - Dropped unwanted status property in dts. > - Removed nodes that are not in use from the board dts. > - Removed spi DT doc patch from the series as it was already applied > and a fix patch was applied subsequently. Added a patch to remove the > compatible to adapt sam9x7. > - Added sam9x7 compatibles in usb dt documentation. > > > Changes in v2: > -------------- > > - Added sam9x7 specific compatibles in DT with fallbacks > - Documented all the newly added DT compatible strings > - Added device tree for the target board sam9x75 curiosity and > documented the same in the DT bindings documentation > - Removed the dt nodes that are not supported at the moment > - Removed the configs added by previous version that are not supported > at the moment > - Fixed all the corrections in the commit message > - Changed all the instances of copyright year to 2023 > - Added sam9x7 flag in PIT64B configuration > - Moved macro definitions to header file > - Added another divider in mck characteristics in the pmc driver > - Fixed the memory leak in the pmc driver > - Dropped patches that are no longer needed > - Picked up Acked-by and Reviewed-by tags > > > Hari Prasath (1): > irqchip/atmel-aic5: Add support for sam9x7 aic > > Varshini Rajendran (26): > dt-bindings: atmel-sysreg: add sam9x7 > dt-bindings: mfd: syscon: add microchip's sam9x7 sfr > dt-bindings: atmel-ssc: add microchip,sam9x7-ssc > dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7. > dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible > ARM: at91: pm: add support for sam9x7 SoC family > ARM: at91: pm: add sam9x7 SoC init config > ARM: at91: add support in SoC driver for new sam9x7 > dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 > dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller > clk: at91: clk-sam9x60-pll: re-factor to support individual core freq > outputs > clk: at91: sam9x7: add support for HW PLL freq dividers > clk: at91: sama7g5: move mux table macros to header file > dt-bindings: clock: at91: Allow PLLs to be exported and referenced in > DT > clk: at91: sam9x7: add sam9x7 pmc driver > dt-bindings: interrupt-controller: Add support for sam9x7 aic > power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 > power: reset: at91-reset: add reset support for sam9x7 SoC > power: reset: at91-reset: add sdhwc support for sam9x7 SoC > dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 > dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 > ARM: at91: Kconfig: add config flag for SAM9X7 SoC > ARM: configs: at91: enable config flags for sam9x7 SoC family > ARM: dts: at91: sam9x7: add device tree for SoC > dt-bindings: arm: add sam9x75 curiosity board > ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board > > .../devicetree/bindings/arm/atmel-at91.yaml | 6 + > .../devicetree/bindings/arm/atmel-sysregs.txt | 6 +- > .../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 + > .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +- > .../interrupt-controller/atmel,aic.yaml | 1 + > .../devicetree/bindings/mfd/syscon.yaml | 188 +-- > .../devicetree/bindings/misc/atmel-ssc.txt | 1 + > .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + > .../reset/atmel,at91sam9260-reset.yaml | 4 + > .../bindings/serial/atmel,at91-usart.yaml | 9 +- > .../soc/microchip/atmel,at91rm9200-tcb.yaml | 20 +- > arch/arm/boot/dts/microchip/Makefile | 3 + > .../dts/microchip/at91-sam9x75_curiosity.dts | 312 +++++ > arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++ > arch/arm/configs/at91_dt_defconfig | 1 + > arch/arm/mach-at91/Kconfig | 22 +- > arch/arm/mach-at91/Makefile | 1 + > arch/arm/mach-at91/generic.h | 2 + > arch/arm/mach-at91/pm.c | 29 + > arch/arm/mach-at91/sam9x7.c | 33 + > drivers/clk/at91/Makefile | 1 + > drivers/clk/at91/clk-sam9x60-pll.c | 42 +- > drivers/clk/at91/pmc.h | 18 + > drivers/clk/at91/sam9x60.c | 7 + > drivers/clk/at91/sam9x7.c | 946 +++++++++++++ > drivers/clk/at91/sama7g5.c | 42 +- > drivers/irqchip/irq-atmel-aic5.c | 10 + > drivers/power/reset/Kconfig | 4 +- > drivers/power/reset/at91-sama5d2_shdwc.c | 1 + > drivers/soc/atmel/soc.c | 23 + > drivers/soc/atmel/soc.h | 9 + > include/dt-bindings/clock/at91.h | 4 + > 32 files changed, 2840 insertions(+), 140 deletions(-) > create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts > create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi > create mode 100644 arch/arm/mach-at91/sam9x7.c > create mode 100644 drivers/clk/at91/sam9x7.c > > -- > 2.25.1 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y microchip/at91-sam9x75_curiosity.dtb' for 20240729065603.1986074-1-varshini.rajendran@microchip.com: arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /ahb/mmc@80000000: failed to match any schema with compatible: ['microchip,sam9x7-sdhci', 'microchip,sam9x60-sdhci'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /ahb/mmc@80000000: failed to match any schema with compatible: ['microchip,sam9x7-sdhci', 'microchip,sam9x60-sdhci'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /ahb/mmc@90000000: failed to match any schema with compatible: ['microchip,sam9x7-sdhci', 'microchip,sam9x60-sdhci'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /ahb/mmc@90000000: failed to match any schema with compatible: ['microchip,sam9x7-sdhci', 'microchip,sam9x60-sdhci'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/dma-controller@f0008000: failed to match any schema with compatible: ['microchip,sam9x7-dma', 'atmel,sama5d4-dma'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/dma-controller@f0008000: failed to match any schema with compatible: ['microchip,sam9x7-dma', 'atmel,sama5d4-dma'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/ssc@f0010000: failed to match any schema with compatible: ['microchip,sam9x7-ssc', 'atmel,at91sam9g45-ssc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/ssc@f0010000: failed to match any schema with compatible: ['microchip,sam9x7-ssc', 'atmel,at91sam9g45-ssc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/timer@f0028000: failed to match any schema with compatible: ['microchip,sam9x7-pit64b', 'microchip,sam9x60-pit64b'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/timer@f0028000: failed to match any schema with compatible: ['microchip,sam9x7-pit64b', 'microchip,sam9x60-pit64b'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/timer@f0040000: failed to match any schema with compatible: ['microchip,sam9x7-pit64b', 'microchip,sam9x60-pit64b'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/timer@f0040000: failed to match any schema with compatible: ['microchip,sam9x7-pit64b', 'microchip,sam9x60-pit64b'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/matrix@ffffde00: failed to match any schema with compatible: ['microchip,sam9x7-matrix', 'atmel,at91sam9x5-matrix', 'syscon'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/matrix@ffffde00: failed to match any schema with compatible: ['microchip,sam9x7-matrix', 'atmel,at91sam9x5-matrix', 'syscon'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/ecc-engine@ffffe000: failed to match any schema with compatible: ['microchip,sam9x7-pmecc', 'atmel,at91sam9g45-pmecc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/ecc-engine@ffffe000: failed to match any schema with compatible: ['microchip,sam9x7-pmecc', 'atmel,at91sam9g45-pmecc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/mpddrc@ffffe800: failed to match any schema with compatible: ['microchip,sam9x7-ddramc', 'atmel,sama5d3-ddramc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/mpddrc@ffffe800: failed to match any schema with compatible: ['microchip,sam9x7-ddramc', 'atmel,sama5d3-ddramc'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/smc@ffffea00: failed to match any schema with compatible: ['microchip,sam9x7-smc', 'atmel,at91sam9260-smc', 'syscon'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/smc@ffffea00: failed to match any schema with compatible: ['microchip,sam9x7-smc', 'atmel,at91sam9260-smc', 'syscon'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/pinctrl@fffff400: failed to match any schema with compatible: ['microchip,sam9x7-pinctrl', 'microchip,sam9x60-pinctrl', 'simple-mfd'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/pinctrl@fffff400: failed to match any schema with compatible: ['microchip,sam9x7-pinctrl', 'microchip,sam9x60-pinctrl', 'simple-mfd'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/syscon@fffffe60: failed to match any schema with compatible: ['microchip,sam9x7-gpbr', 'atmel,at91sam9260-gpbr', 'syscon'] arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dtb: /apb/syscon@fffffe60: failed to match any schema with compatible: ['microchip,sam9x7-gpbr', 'atmel,at91sam9260-gpbr', 'syscon']
On 29.07.2024 09:56, Varshini Rajendran wrote: > This patch series adds support for the new SoC family - sam9x7. > - The device tree, configs and drivers are added > - Clock driver for sam9x7 is added > - Support for basic peripherals is added > - Target board SAM9X75 Curiosity is added [ ... ] > > Changes in v6: > -------------- > > - Addressed all the review comments in the patches > - Picked up all Acked-by and Reviewed-by tags > - Reverted the IRQ patch to that of version 3 of the same series > - All the specific changes are captured in the corresponding patches > [ ... ] > > Varshini Rajendran (26): > dt-bindings: atmel-sysreg: add sam9x7 > ARM: at91: pm: add support for sam9x7 SoC family > ARM: at91: pm: add sam9x7 SoC init config > ARM: at91: add support in SoC driver for new sam9x7 Applied to at91-soc, thanks! > dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 > dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller > clk: at91: clk-sam9x60-pll: re-factor to support individual core freq > outputs > clk: at91: sam9x7: add support for HW PLL freq dividers > clk: at91: sama7g5: move mux table macros to header file > dt-bindings: clock: at91: Allow PLLs to be exported and referenced in > DT > clk: at91: sam9x7: add sam9x7 pmc driver Applied to clk-microchip, thanks! > ARM: at91: Kconfig: add config flag for SAM9X7 SoC Applied to at91-soc, thanks! > ARM: configs: at91: enable config flags for sam9x7 SoC family Applied to at91-defconfig, thanks!
This patch series adds support for the new SoC family - sam9x7. - The device tree, configs and drivers are added - Clock driver for sam9x7 is added - Support for basic peripherals is added - Target board SAM9X75 Curiosity is added Changes in v6: -------------- - Addressed all the review comments in the patches - Picked up all Acked-by and Reviewed-by tags - Reverted the IRQ patch to that of version 3 of the same series - All the specific changes are captured in the corresponding patches Changes in v5: -------------- - Addressed all the review comments in the patches - Picked up all Acked-by and Reviewed-by tags - Dropped applied patches from the series - Addressed the ABI breakage reported in the IRQ patch - All the specific changes are captured in the corresponding patches Changes in v4: -------------- - Addressed all the review comments in the patches - Picked up all Acked-by and Reviewed-by tags - Dropped applied patches from the series - Added pwm node and related dt binding documentation - Added support for exporting some clocks to DT - Dropped USB related patches and changes. See NOTE. - All the specific changes are captured in the corresponding patches NOTE: Owing to the discussion here https://lore.kernel.org/linux-devicetree/CAL_JsqJ9PrX6fj-EbffeJce09MXs=B7t+KS_kOinxaRx38=WxA@mail.gmail.com/ the USB related changes are dropped from this series in order to enable us to work on the mentioned issues before adding new compatibles as said. The issues/warnings will be addressed in subsequent patches. After which the USB related support for sam9x7 SoCs will be added. Hope this works out fine. Changes in v3: -------------- - Fixed the DT documentation errors pointed out in v2. - Dropped Acked-by tag in tcb DT doc patch as it had to be adapted according to sam9x7 correctly. - Picked by the previously missed tags. - Dropped this patch "dt-bindings: usb: generic-ehci: Document clock-names property" as the warning was not found while validating DT-schema for at91-sam9x75_curiosity.dtb. - Dropped redundant words in the commit message. - Fixed the CHECK_DTBS warnings validated against at91-sam9x75_curiosity.dtb. - Renamed dt nodes according to naming convention. - Dropped unwanted status property in dts. - Removed nodes that are not in use from the board dts. - Removed spi DT doc patch from the series as it was already applied and a fix patch was applied subsequently. Added a patch to remove the compatible to adapt sam9x7. - Added sam9x7 compatibles in usb dt documentation. Changes in v2: -------------- - Added sam9x7 specific compatibles in DT with fallbacks - Documented all the newly added DT compatible strings - Added device tree for the target board sam9x75 curiosity and documented the same in the DT bindings documentation - Removed the dt nodes that are not supported at the moment - Removed the configs added by previous version that are not supported at the moment - Fixed all the corrections in the commit message - Changed all the instances of copyright year to 2023 - Added sam9x7 flag in PIT64B configuration - Moved macro definitions to header file - Added another divider in mck characteristics in the pmc driver - Fixed the memory leak in the pmc driver - Dropped patches that are no longer needed - Picked up Acked-by and Reviewed-by tags Hari Prasath (1): irqchip/atmel-aic5: Add support for sam9x7 aic Varshini Rajendran (26): dt-bindings: atmel-sysreg: add sam9x7 dt-bindings: mfd: syscon: add microchip's sam9x7 sfr dt-bindings: atmel-ssc: add microchip,sam9x7-ssc dt-bindings: serial: atmel,at91-usart: add compatible for sam9x7. dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible ARM: at91: pm: add support for sam9x7 SoC family ARM: at91: pm: add sam9x7 SoC init config ARM: at91: add support in SoC driver for new sam9x7 dt-bindings: clocks: atmel,at91sam9x5-sckc: add sam9x7 dt-bindings: clocks: atmel,at91rm9200-pmc: add sam9x7 clock controller clk: at91: clk-sam9x60-pll: re-factor to support individual core freq outputs clk: at91: sam9x7: add support for HW PLL freq dividers clk: at91: sama7g5: move mux table macros to header file dt-bindings: clock: at91: Allow PLLs to be exported and referenced in DT clk: at91: sam9x7: add sam9x7 pmc driver dt-bindings: interrupt-controller: Add support for sam9x7 aic power: reset: at91-poweroff: lookup for proper pmc dt node for sam9x7 power: reset: at91-reset: add reset support for sam9x7 SoC power: reset: at91-reset: add sdhwc support for sam9x7 SoC dt-bindings: reset: atmel,at91sam9260-reset: add sam9x7 dt-bindings: power: reset: atmel,sama5d2-shdwc: add sam9x7 ARM: at91: Kconfig: add config flag for SAM9X7 SoC ARM: configs: at91: enable config flags for sam9x7 SoC family ARM: dts: at91: sam9x7: add device tree for SoC dt-bindings: arm: add sam9x75 curiosity board ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board .../devicetree/bindings/arm/atmel-at91.yaml | 6 + .../devicetree/bindings/arm/atmel-sysregs.txt | 6 +- .../bindings/clock/atmel,at91rm9200-pmc.yaml | 2 + .../bindings/clock/atmel,at91sam9x5-sckc.yaml | 4 +- .../interrupt-controller/atmel,aic.yaml | 1 + .../devicetree/bindings/mfd/syscon.yaml | 188 +-- .../devicetree/bindings/misc/atmel-ssc.txt | 1 + .../power/reset/atmel,sama5d2-shdwc.yaml | 3 + .../reset/atmel,at91sam9260-reset.yaml | 4 + .../bindings/serial/atmel,at91-usart.yaml | 9 +- .../soc/microchip/atmel,at91rm9200-tcb.yaml | 20 +- arch/arm/boot/dts/microchip/Makefile | 3 + .../dts/microchip/at91-sam9x75_curiosity.dts | 312 +++++ arch/arm/boot/dts/microchip/sam9x7.dtsi | 1226 +++++++++++++++++ arch/arm/configs/at91_dt_defconfig | 1 + arch/arm/mach-at91/Kconfig | 22 +- arch/arm/mach-at91/Makefile | 1 + arch/arm/mach-at91/generic.h | 2 + arch/arm/mach-at91/pm.c | 29 + arch/arm/mach-at91/sam9x7.c | 33 + drivers/clk/at91/Makefile | 1 + drivers/clk/at91/clk-sam9x60-pll.c | 42 +- drivers/clk/at91/pmc.h | 18 + drivers/clk/at91/sam9x60.c | 7 + drivers/clk/at91/sam9x7.c | 946 +++++++++++++ drivers/clk/at91/sama7g5.c | 42 +- drivers/irqchip/irq-atmel-aic5.c | 10 + drivers/power/reset/Kconfig | 4 +- drivers/power/reset/at91-sama5d2_shdwc.c | 1 + drivers/soc/atmel/soc.c | 23 + drivers/soc/atmel/soc.h | 9 + include/dt-bindings/clock/at91.h | 4 + 32 files changed, 2840 insertions(+), 140 deletions(-) create mode 100644 arch/arm/boot/dts/microchip/at91-sam9x75_curiosity.dts create mode 100644 arch/arm/boot/dts/microchip/sam9x7.dtsi create mode 100644 arch/arm/mach-at91/sam9x7.c create mode 100644 drivers/clk/at91/sam9x7.c