diff mbox series

[V2,06/16] drm/vc4: hdmi: Handle error case of pm_runtime_resume_and_get

Message ID 20240728114200.75559-7-wahrenst@gmx.net (mailing list archive)
State Superseded
Headers show
Series ARM: bcm2835: Implement initial S2Idle for Raspberry Pi | expand

Commit Message

Stefan Wahren July 28, 2024, 11:41 a.m. UTC
The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
powered in detect") introduced the necessary power management handling
to avoid register access while controller is powered down.
Unfortunately it just print a warning if pm_runtime_resume_and_get()
fails and proceed anyway.

This could happen during suspend to idle. So we must assume it is unsafe
to access the HDMI register. So bail out properly.

Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
---
 drivers/gpu/drm/vc4/vc4_hdmi.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

--
2.34.1

Comments

Maíra Canal July 30, 2024, 11:37 a.m. UTC | #1
On 7/28/24 08:41, Stefan Wahren wrote:
> The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
> powered in detect") introduced the necessary power management handling
> to avoid register access while controller is powered down.
> Unfortunately it just print a warning if pm_runtime_resume_and_get()
> fails and proceed anyway.
> 
> This could happen during suspend to idle. So we must assume it is unsafe
> to access the HDMI register. So bail out properly.
> 
> Fixes: 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is powered in detect")
> Signed-off-by: Stefan Wahren <wahrenst@gmx.net>

Reviewed-by: Maíra Canal <mcanal@igalia.com>

Best Regards,
- Maíra

> ---
>   drivers/gpu/drm/vc4/vc4_hdmi.c | 8 +++++++-
>   1 file changed, 7 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index d57c4a5948c8..cb424604484f 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -429,6 +429,7 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
>   {
>   	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
>   	enum drm_connector_status status = connector_status_disconnected;
> +	int ret;
> 
>   	/*
>   	 * NOTE: This function should really take vc4_hdmi->mutex, but
> @@ -441,7 +442,12 @@ static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
>   	 * the lock for now.
>   	 */
> 
> -	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
> +	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
> +	if (ret) {
> +		drm_err_once(connector->dev, "Failed to retain HDMI power domain: %d\n",
> +			     ret);
> +		return connector_status_unknown;
> +	}
> 
>   	if (vc4_hdmi->hpd_gpio) {
>   		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))
> --
> 2.34.1
>
Maxime Ripard July 30, 2024, 1:32 p.m. UTC | #2
On Sun, 28 Jul 2024 13:41:50 +0200, Stefan Wahren wrote:
> The commit 0f5251339eda ("drm/vc4: hdmi: Make sure the controller is
> powered in detect") introduced the necessary power management handling
> to avoid register access while controller is powered down.
> Unfortunately it just print a warning if pm_runtime_resume_and_get()
> fails and proceed anyway.
> 
> [ ... ]

Acked-by: Maxime Ripard <mripard@kernel.org>

Thanks!
Maxime
diff mbox series

Patch

diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index d57c4a5948c8..cb424604484f 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -429,6 +429,7 @@  static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
 {
 	struct vc4_hdmi *vc4_hdmi = connector_to_vc4_hdmi(connector);
 	enum drm_connector_status status = connector_status_disconnected;
+	int ret;

 	/*
 	 * NOTE: This function should really take vc4_hdmi->mutex, but
@@ -441,7 +442,12 @@  static int vc4_hdmi_connector_detect_ctx(struct drm_connector *connector,
 	 * the lock for now.
 	 */

-	WARN_ON(pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev));
+	ret = pm_runtime_resume_and_get(&vc4_hdmi->pdev->dev);
+	if (ret) {
+		drm_err_once(connector->dev, "Failed to retain HDMI power domain: %d\n",
+			     ret);
+		return connector_status_unknown;
+	}

 	if (vc4_hdmi->hpd_gpio) {
 		if (gpiod_get_value_cansleep(vc4_hdmi->hpd_gpio))