diff mbox series

[v6,2/2] mm, memcg: cg2 memory{.swap,}.peak write tests

Message ID 20240729143743.34236-3-davidf@vimeo.com (mailing list archive)
State New
Headers show
Series [v6,1/2] mm, memcg: cg2 memory{.swap,}.peak write handlers | expand

Commit Message

David Finkel July 29, 2024, 2:37 p.m. UTC
Extend two existing tests to cover extracting memory usage through the
newly mutable memory.peak and memory.swap.peak handlers.

In particular, make sure to exercise adding and removing watchers with
overlapping lifetimes so the less-trivial logic gets tested.

Signed-off-by: David Finkel <davidf@vimeo.com>
---
 tools/testing/selftests/cgroup/cgroup_util.c  |  22 ++
 tools/testing/selftests/cgroup/cgroup_util.h  |   2 +
 .../selftests/cgroup/test_memcontrol.c        | 229 +++++++++++++++++-
 3 files changed, 245 insertions(+), 8 deletions(-)

Comments

Michal Koutný July 30, 2024, 3:46 p.m. UTC | #1
Hello.

On Mon, Jul 29, 2024 at 10:37:43AM GMT, David Finkel <davidf@vimeo.com> wrote:
> Extend two existing tests to cover extracting memory usage through the
> newly mutable memory.peak and memory.swap.peak handlers.

BTW do the tests pass for you?

I gave it a try (v6.11-rc1+your patches)

$ grep "not ok 2" -B30 test.strace

...
315   15:19:13.990351 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315   15:19:13.994457 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315   15:19:13.998562 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315   15:19:13.998652 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315   15:19:14.002759 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
315   15:19:14.006864 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 7
315   15:19:14.006989 read(7, "270336\n", 127) = 7
315   15:19:14.011114 close(7)          = 0
315   15:19:14.015262 close(6)          = 0
315   15:19:14.015448 exit_group(-1)    = ?
315   15:19:14.019753 +++ exited with 255 +++
313   15:19:14.019820 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 255}], 0, NULL) = 315
313   15:19:14.019878 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=315, si_uid=0, si_status=255, si_utime=1 /* 0.01 s */, -
313   15:19:14.019926 close(3)          = 0
313   15:19:14.020001 close(5)          = 0
313   15:19:14.020072 close(4)          = 0
313   15:19:14.024173 rmdir("/sys/fs/cgroup/memcg_test") = 0
313   15:19:14.028517 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33

grep "^315 .*read.*4096" -c test.strace
12800

Hopefully, unrelated to your changes. I ran this within initrd (rapido
image) so it may be an issue how rootfs pagecache is undercharged (due
to sharing?), instead of 50M, there's only ~256k.

To verify, I also tried with memory.peak patch reverted, failing
differently:

...
238   15:30:29.034623 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 3
238   15:30:29.034766 read(3, "52801536\n", 127) = 9
238   15:30:29.038895 close(3)          = 0
238   15:30:29.043048 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.stat", O_RDONLY) = 3
238   15:30:29.043230 read(3, "anon 52436992\nfile 0\nkernel 1105"..., 4095) = 870
238   15:30:29.047379 close(3)          = 0
238   15:30:29.051491 munmap(0x7f2473600000, 52432896) = 0
238   15:30:29.058516 exit_group(0)     = ?
238   15:30:29.062992 +++ exited with 0 +++
237   15:30:29.067054 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 238
237   15:30:29.067136 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=238, si_uid=0, si_status=0, si_utime=1 /* 0.01 s */, si-
237   15:30:29.067210 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDONLY) = 3
237   15:30:29.071349 read(3, "52805632\n", 127) = 9
237   15:30:29.075470 close(3)          = 0
237   15:30:29.075562 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 3
237   15:30:29.079712 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 4
237   15:30:29.083848 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 5
237   15:30:29.083970 write(3, "reset\n\0", 7) = -1 EINVAL (Invalid argument)
237   15:30:29.088095 close(3)          = 0
237   15:30:29.092209 close(4)          = 0
237   15:30:29.092295 close(5)          = 0
237   15:30:29.096398 close(-1)         = -1 EBADF (Bad file descriptor)
237   15:30:29.100497 rmdir("/sys/fs/cgroup/memcg_test") = 0
237   15:30:29.100760 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33

This failure makes sense but it reminded me --
could you please modify the test so that it checks write permission
of memory.peak and skips the reset testing on old(er) kernels? That'd be
in accordance with other cgroup selftest that maintain partial backwards
compatibility when possible.

Thanks,
Michal
David Finkel July 30, 2024, 3:52 p.m. UTC | #2
Thanks for checking!

On Tue, Jul 30, 2024 at 11:46 AM Michal Koutný <mkoutny@suse.com> wrote:
>
> Hello.
>
> On Mon, Jul 29, 2024 at 10:37:43AM GMT, David Finkel <davidf@vimeo.com> wrote:
> > Extend two existing tests to cover extracting memory usage through the
> > newly mutable memory.peak and memory.swap.peak handlers.
>
> BTW do the tests pass for you?

Yeah, my tests pass when running on top of an ext2 mount.
At least one of the existing tests failed when running out of tmpfs,
so I've been testing with an ext2 mount in UML.
>
> I gave it a try (v6.11-rc1+your patches)
>
> $ grep "not ok 2" -B30 test.strace
>
> ...
> 315   15:19:13.990351 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
> 315   15:19:13.994457 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
> 315   15:19:13.998562 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
> 315   15:19:13.998652 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
> 315   15:19:14.002759 read(6, "\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0"..., 4096) = 4096
> 315   15:19:14.006864 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 7
> 315   15:19:14.006989 read(7, "270336\n", 127) = 7
> 315   15:19:14.011114 close(7)          = 0
> 315   15:19:14.015262 close(6)          = 0
> 315   15:19:14.015448 exit_group(-1)    = ?
> 315   15:19:14.019753 +++ exited with 255 +++
> 313   15:19:14.019820 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 255}], 0, NULL) = 315
> 313   15:19:14.019878 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=315, si_uid=0, si_status=255, si_utime=1 /* 0.01 s */, -
> 313   15:19:14.019926 close(3)          = 0
> 313   15:19:14.020001 close(5)          = 0
> 313   15:19:14.020072 close(4)          = 0
> 313   15:19:14.024173 rmdir("/sys/fs/cgroup/memcg_test") = 0
> 313   15:19:14.028517 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33
>
> grep "^315 .*read.*4096" -c test.strace
> 12800
>
> Hopefully, unrelated to your changes. I ran this within initrd (rapido
> image) so it may be an issue how rootfs pagecache is undercharged (due
> to sharing?), instead of 50M, there's only ~256k.
>
> To verify, I also tried with memory.peak patch reverted, failing
> differently:
>
> ...
> 238   15:30:29.034623 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.current", O_RDONLY) = 3
> 238   15:30:29.034766 read(3, "52801536\n", 127) = 9
> 238   15:30:29.038895 close(3)          = 0
> 238   15:30:29.043048 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.stat", O_RDONLY) = 3
> 238   15:30:29.043230 read(3, "anon 52436992\nfile 0\nkernel 1105"..., 4095) = 870
> 238   15:30:29.047379 close(3)          = 0
> 238   15:30:29.051491 munmap(0x7f2473600000, 52432896) = 0
> 238   15:30:29.058516 exit_group(0)     = ?
> 238   15:30:29.062992 +++ exited with 0 +++
> 237   15:30:29.067054 <... wait4 resumed>[{WIFEXITED(s) && WEXITSTATUS(s) == 0}], 0, NULL) = 238
> 237   15:30:29.067136 --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=238, si_uid=0, si_status=0, si_utime=1 /* 0.01 s */, si-
> 237   15:30:29.067210 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDONLY) = 3
> 237   15:30:29.071349 read(3, "52805632\n", 127) = 9
> 237   15:30:29.075470 close(3)          = 0
> 237   15:30:29.075562 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 3
> 237   15:30:29.079712 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 4
> 237   15:30:29.083848 openat(AT_FDCWD, "/sys/fs/cgroup/memcg_test/memory.peak", O_RDWR|O_APPEND|O_CLOEXEC) = 5
> 237   15:30:29.083970 write(3, "reset\n\0", 7) = -1 EINVAL (Invalid argument)
> 237   15:30:29.088095 close(3)          = 0
> 237   15:30:29.092209 close(4)          = 0
> 237   15:30:29.092295 close(5)          = 0
> 237   15:30:29.096398 close(-1)         = -1 EBADF (Bad file descriptor)
> 237   15:30:29.100497 rmdir("/sys/fs/cgroup/memcg_test") = 0
> 237   15:30:29.100760 write(1, "not ok 2 test_memcg_current_peak"..., 33) = 33
>
> This failure makes sense but it reminded me --
> could you please modify the test so that it checks write permission
> of memory.peak and skips the reset testing on old(er) kernels? That'd be
> in accordance with other cgroup selftest that maintain partial backwards
> compatibility when possible.

Sure, I'll add that to the tests in a bit.
>
> Thanks,
> Michal
diff mbox series

Patch

diff --git a/tools/testing/selftests/cgroup/cgroup_util.c b/tools/testing/selftests/cgroup/cgroup_util.c
index 432db923bced0..1e2d46636a0ca 100644
--- a/tools/testing/selftests/cgroup/cgroup_util.c
+++ b/tools/testing/selftests/cgroup/cgroup_util.c
@@ -141,6 +141,16 @@  long cg_read_long(const char *cgroup, const char *control)
 	return atol(buf);
 }
 
+long cg_read_long_fd(int fd)
+{
+	char buf[128];
+
+	if (pread(fd, buf, sizeof(buf), 0) <= 0)
+		return -1;
+
+	return atol(buf);
+}
+
 long cg_read_key_long(const char *cgroup, const char *control, const char *key)
 {
 	char buf[PAGE_SIZE];
@@ -183,6 +193,18 @@  int cg_write(const char *cgroup, const char *control, char *buf)
 	return ret == len ? 0 : ret;
 }
 
+/*
+ * Returns fd on success, or -1 on failure.
+ * (fd should be closed with close() as usual)
+ */
+int cg_open(const char *cgroup, const char *control, int flags)
+{
+	char path[PATH_MAX];
+
+	snprintf(path, sizeof(path), "%s/%s", cgroup, control);
+	return open(path, flags);
+}
+
 int cg_write_numeric(const char *cgroup, const char *control, long value)
 {
 	char buf[64];
diff --git a/tools/testing/selftests/cgroup/cgroup_util.h b/tools/testing/selftests/cgroup/cgroup_util.h
index e8d04ac9e3d23..19b131ee77072 100644
--- a/tools/testing/selftests/cgroup/cgroup_util.h
+++ b/tools/testing/selftests/cgroup/cgroup_util.h
@@ -34,9 +34,11 @@  extern int cg_read_strcmp(const char *cgroup, const char *control,
 extern int cg_read_strstr(const char *cgroup, const char *control,
 			  const char *needle);
 extern long cg_read_long(const char *cgroup, const char *control);
+extern long cg_read_long_fd(int fd);
 long cg_read_key_long(const char *cgroup, const char *control, const char *key);
 extern long cg_read_lc(const char *cgroup, const char *control);
 extern int cg_write(const char *cgroup, const char *control, char *buf);
+extern int cg_open(const char *cgroup, const char *control, int flags);
 int cg_write_numeric(const char *cgroup, const char *control, long value);
 extern int cg_run(const char *cgroup,
 		  int (*fn)(const char *cgroup, void *arg),
diff --git a/tools/testing/selftests/cgroup/test_memcontrol.c b/tools/testing/selftests/cgroup/test_memcontrol.c
index 41ae8047b8895..f54c1f75b6da7 100644
--- a/tools/testing/selftests/cgroup/test_memcontrol.c
+++ b/tools/testing/selftests/cgroup/test_memcontrol.c
@@ -161,13 +161,15 @@  static int alloc_pagecache_50M_check(const char *cgroup, void *arg)
 /*
  * This test create a memory cgroup, allocates
  * some anonymous memory and some pagecache
- * and check memory.current and some memory.stat values.
+ * and checks memory.current, memory.peak, and some memory.stat values.
  */
-static int test_memcg_current(const char *root)
+static int test_memcg_current_peak(const char *root)
 {
 	int ret = KSFT_FAIL;
-	long current;
+	long current, peak, peak_reset;
 	char *memcg;
+	bool fd2_closed = false, fd3_closed = false, fd4_closed = false;
+	int peak_fd = -1, peak_fd2 = -1, peak_fd3 = -1, peak_fd4 = -1;
 
 	memcg = cg_name(root, "memcg_test");
 	if (!memcg)
@@ -180,15 +182,108 @@  static int test_memcg_current(const char *root)
 	if (current != 0)
 		goto cleanup;
 
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak != 0)
+		goto cleanup;
+
 	if (cg_run(memcg, alloc_anon_50M_check, NULL))
 		goto cleanup;
 
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak < MB(50))
+		goto cleanup;
+
+	/*
+	 * We'll open a few FDs for the same memory.peak file to exercise the free-path
+	 * We need at least three to be closed in a different order than writes occurred to test
+	 * the linked-list handling.
+	 */
+	peak_fd = cg_open(memcg, "memory.peak", O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (peak_fd == -1)
+		goto cleanup;
+
+	peak_fd2 = cg_open(memcg, "memory.peak", O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (peak_fd2 == -1)
+		goto cleanup;
+
+	peak_fd3 = cg_open(memcg, "memory.peak", O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (peak_fd3 == -1)
+		goto cleanup;
+
+	/* any non-empty string resets, but make it clear */
+	static const char reset_string[] = "reset\n";
+
+	peak_reset = write(peak_fd, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	peak_reset = write(peak_fd2, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	peak_reset = write(peak_fd3, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	/* Make sure a completely independent read isn't affected by our  FD-local reset above*/
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak < MB(50))
+		goto cleanup;
+
+	fd2_closed = true;
+	if (close(peak_fd2))
+		goto cleanup;
+
+	peak_fd4 = cg_open(memcg, "memory.peak", O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (peak_fd4 == -1)
+		goto cleanup;
+
+	peak_reset = write(peak_fd4, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	peak = cg_read_long_fd(peak_fd);
+	if (peak > MB(30) || peak < 0)
+		goto cleanup;
+
 	if (cg_run(memcg, alloc_pagecache_50M_check, NULL))
 		goto cleanup;
 
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak < MB(50))
+		goto cleanup;
+
+	/* Make sure everything is back to normal */
+	peak = cg_read_long_fd(peak_fd);
+	if (peak < MB(50))
+		goto cleanup;
+
+	peak = cg_read_long_fd(peak_fd4);
+	if (peak < MB(50))
+		goto cleanup;
+
+	fd3_closed = true;
+	if (close(peak_fd3))
+		goto cleanup;
+
+	fd4_closed = true;
+	if (close(peak_fd4))
+		goto cleanup;
+
 	ret = KSFT_PASS;
 
 cleanup:
+	close(peak_fd);
+	if (!fd2_closed)
+		close(peak_fd2);
+	if (!fd3_closed)
+		close(peak_fd3);
+	if (!fd4_closed)
+		close(peak_fd4);
 	cg_destroy(memcg);
 	free(memcg);
 
@@ -817,13 +912,17 @@  static int alloc_anon_50M_check_swap(const char *cgroup, void *arg)
 
 /*
  * This test checks that memory.swap.max limits the amount of
- * anonymous memory which can be swapped out.
+ * anonymous memory which can be swapped out. Additionally, it verifies that
+ * memory.swap.peak reflects the high watermark and can be reset.
  */
-static int test_memcg_swap_max(const char *root)
+static int test_memcg_swap_max_peak(const char *root)
 {
 	int ret = KSFT_FAIL;
 	char *memcg;
-	long max;
+	long max, peak;
+
+	/* any non-empty string resets */
+	static const char reset_string[] = "foobarbaz";
 
 	if (!is_swap_enabled())
 		return KSFT_SKIP;
@@ -840,6 +939,45 @@  static int test_memcg_swap_max(const char *root)
 		goto cleanup;
 	}
 
+	int swap_peak_fd = cg_open(memcg, "memory.swap.peak",
+				   O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (swap_peak_fd == -1)
+		goto cleanup;
+
+	int mem_peak_fd = cg_open(memcg, "memory.peak", O_RDWR | O_APPEND | O_CLOEXEC);
+
+	if (mem_peak_fd == -1)
+		goto cleanup;
+
+	if (cg_read_long(memcg, "memory.swap.peak"))
+		goto cleanup;
+
+	if (cg_read_long_fd(swap_peak_fd))
+		goto cleanup;
+
+	/* switch the swap and mem fds into local-peak tracking mode*/
+	int peak_reset = write(swap_peak_fd, reset_string, sizeof(reset_string));
+
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	if (cg_read_long_fd(swap_peak_fd))
+		goto cleanup;
+
+	if (cg_read_long(memcg, "memory.peak"))
+		goto cleanup;
+
+	if (cg_read_long_fd(mem_peak_fd))
+		goto cleanup;
+
+	peak_reset = write(mem_peak_fd, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	if (cg_read_long_fd(mem_peak_fd))
+		goto cleanup;
+
 	if (cg_read_strcmp(memcg, "memory.max", "max\n"))
 		goto cleanup;
 
@@ -862,6 +1000,61 @@  static int test_memcg_swap_max(const char *root)
 	if (cg_read_key_long(memcg, "memory.events", "oom_kill ") != 1)
 		goto cleanup;
 
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long(memcg, "memory.swap.peak");
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long_fd(mem_peak_fd);
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long_fd(swap_peak_fd);
+	if (peak < MB(29))
+		goto cleanup;
+
+	/*
+	 * open, reset and close the peak swap on another FD to make sure
+	 * multiple extant fds don't corrupt the linked-list
+	 */
+	peak_reset = cg_write(memcg, "memory.swap.peak", (char *)reset_string);
+	if (peak_reset)
+		goto cleanup;
+
+	peak_reset = cg_write(memcg, "memory.peak", (char *)reset_string);
+	if (peak_reset)
+		goto cleanup;
+
+	/* actually reset on the fds */
+	peak_reset = write(swap_peak_fd, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	peak_reset = write(mem_peak_fd, reset_string, sizeof(reset_string));
+	if (peak_reset != sizeof(reset_string))
+		goto cleanup;
+
+	peak = cg_read_long_fd(swap_peak_fd);
+	if (peak > MB(10))
+		goto cleanup;
+
+	/*
+	 * The cgroup is now empty, but there may be a page or two associated
+	 * with the open FD accounted to it.
+	 */
+	peak = cg_read_long_fd(mem_peak_fd);
+	if (peak > MB(1))
+		goto cleanup;
+
+	if (cg_read_long(memcg, "memory.peak") < MB(29))
+		goto cleanup;
+
+	if (cg_read_long(memcg, "memory.swap.peak") < MB(29))
+		goto cleanup;
+
 	if (cg_run(memcg, alloc_anon_50M_check_swap, (void *)MB(30)))
 		goto cleanup;
 
@@ -869,9 +1062,29 @@  static int test_memcg_swap_max(const char *root)
 	if (max <= 0)
 		goto cleanup;
 
+	peak = cg_read_long(memcg, "memory.peak");
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long(memcg, "memory.swap.peak");
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long_fd(mem_peak_fd);
+	if (peak < MB(29))
+		goto cleanup;
+
+	peak = cg_read_long_fd(swap_peak_fd);
+	if (peak < MB(19))
+		goto cleanup;
+
 	ret = KSFT_PASS;
 
 cleanup:
+	if (close(mem_peak_fd))
+		ret = KSFT_FAIL;
+	if (close(swap_peak_fd))
+		ret = KSFT_FAIL;
 	cg_destroy(memcg);
 	free(memcg);
 
@@ -1295,7 +1508,7 @@  struct memcg_test {
 	const char *name;
 } tests[] = {
 	T(test_memcg_subtree_control),
-	T(test_memcg_current),
+	T(test_memcg_current_peak),
 	T(test_memcg_min),
 	T(test_memcg_low),
 	T(test_memcg_high),
@@ -1303,7 +1516,7 @@  struct memcg_test {
 	T(test_memcg_max),
 	T(test_memcg_reclaim),
 	T(test_memcg_oom_events),
-	T(test_memcg_swap_max),
+	T(test_memcg_swap_max_peak),
 	T(test_memcg_sock),
 	T(test_memcg_oom_group_leaf_events),
 	T(test_memcg_oom_group_parent_events),