diff mbox series

[v2,1/2] ARM: dts: ti: omap: am335x-regor: Fix RS485 settings

Message ID 20240730092353.10209-1-d.haller@phytec.de (mailing list archive)
State New
Headers show
Series [v2,1/2] ARM: dts: ti: omap: am335x-regor: Fix RS485 settings | expand

Commit Message

Dominik Haller July 30, 2024, 9:23 a.m. UTC 
From: Steffen Hemer <s.hemer@phytec.de>

RTS pin seems to have inverted behavior on am335x, other than expected
with default "rs485-rts-active-high" (instead of low on idle, high on send,
it is the opposite). Transceiver datasheet also suggests a pulldown.
Add includes to pin definitions that are used.

Signed-off-by: Steffen Hemer <s.hemer@phytec.de>
Signed-off-by: Dominik Haller <d.haller@phytec.de>
---

Notes:
    v1->v2: Added my signed-off to patch 1
    Link to v1: https://lore.kernel.org/linux-omap/7hbk2g3qhe.fsf@baylibre.com/T/#t

 arch/arm/boot/dts/ti/omap/am335x-regor.dtsi | 10 +++++++++-
 1 file changed, 9 insertions(+), 1 deletion(-)

Comments

Kevin Hilman July 30, 2024, 7:23 p.m. UTC | #1 
On Tue, 30 Jul 2024 11:23:52 +0200, Dominik Haller wrote:
> RTS pin seems to have inverted behavior on am335x, other than expected
> with default "rs485-rts-active-high" (instead of low on idle, high on send,
> it is the opposite). Transceiver datasheet also suggests a pulldown.
> Add includes to pin definitions that are used.
> 
> 

Applied, thanks!

[1/2] ARM: dts: ti: omap: am335x-regor: Fix RS485 settings
      commit: e589ec9847e5fc78a219a85b740599ae115b6431
[2/2] ARM: dts: ti: omap: am335x-wega: Fix audio clock provider
      commit: 6a410ff5359610779908cf94f18f9f39281ecabd

Best regards,
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi
index 625db3bcd365..287d209a0ea9 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-regor.dtsi
@@ -5,6 +5,9 @@ 
  *
  */
 
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/am33xx.h>
+
 / {
 	model = "Phytec AM335x phyBOARD-REGOR";
 	compatible = "phytec,am335x-regor", "phytec,am335x-phycore-som", "ti,am33xx";
@@ -188,7 +191,7 @@  uart1_rs485_pins: pinmux-uart1-rs485-pins {
 		pinctrl-single,pins = <
 			AM33XX_PADCONF(AM335X_PIN_UART1_RXD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_UART1_TXD, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLUP, MUX_MODE0)
+			AM33XX_PADCONF(AM335X_PIN_UART1_RTSN, PIN_OUTPUT_PULLDOWN, MUX_MODE0)
 		>;
 	};
 };
@@ -198,4 +201,9 @@  &uart1 {
 	pinctrl-0 = <&uart1_rs485_pins>;
 	status = "okay";
 	linux,rs485-enabled-at-boot-time;
+	/*
+	 * un-intuitively, yet with the default (active-high),
+	 * am335x RTS is high on idle and gets low on active !
+	 */
+	rs485-rts-active-low;
 };