| Message ID | 20240731-qx1050-feature-expansion-v3-2-b945527fa5d2@riseup.net (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 4686161eb87168ec746eb54d7b84c5d022073a33 |
| Headers | show |
| Series | F(x)tec Pro1X feature expansion | expand |
On 31/07/2024 08:18, Dang Huynh wrote: > F(x)tec Pro1X comes with PCA9534 IO Expander, it is used for enabling > touch screen VDD/VDDIO and keyboard's caps lock LED. > > Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> > Signed-off-by: Dang Huynh <danct12@riseup.net> > --- > arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > index 70f479a63f2e..47e446249af6 100644 > --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts > @@ -70,6 +70,23 @@ &dispcc { > status = "disabled"; > }; > > +&gpi_dma0 { > + status = "okay"; > +}; > + > +&i2c1 { > + status = "okay"; > + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ This is the default, so you can drop this comment. Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org> > + clock-frequency = <100000>; > + > + pca9534: gpio@21 { > + compatible = "nxp,pca9534"; > + reg = <0x21>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > +}; > + > &pm6125_gpios { > vol_up_n: vol-up-n-state { > pins = "gpio5"; > @@ -89,6 +106,10 @@ &pon_resin { > status = "okay"; > }; > > +&qupv3_id_0 { > + status = "okay"; > +}; > + > &rpm_requests { > regulators-0 { > compatible = "qcom,rpm-pm6125-regulators"; >
diff --git a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts index 70f479a63f2e..47e446249af6 100644 --- a/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts +++ b/arch/arm64/boot/dts/qcom/sm6115-fxtec-pro1x.dts @@ -70,6 +70,23 @@ &dispcc { status = "disabled"; }; +&gpi_dma0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + /* Clock frequency was not specified downstream, let's park it to 100 KHz */ + clock-frequency = <100000>; + + pca9534: gpio@21 { + compatible = "nxp,pca9534"; + reg = <0x21>; + gpio-controller; + #gpio-cells = <2>; + }; +}; + &pm6125_gpios { vol_up_n: vol-up-n-state { pins = "gpio5"; @@ -89,6 +106,10 @@ &pon_resin { status = "okay"; }; +&qupv3_id_0 { + status = "okay"; +}; + &rpm_requests { regulators-0 { compatible = "qcom,rpm-pm6125-regulators";