@@ -29,6 +29,7 @@
/* Synopsys Core versions */
#define DWMAC_CORE_3_40 0x34
#define DWMAC_CORE_3_50 0x35
+#define DWMAC_CORE_3_70 0x37
#define DWMAC_CORE_4_00 0x40
#define DWMAC_CORE_4_10 0x41
#define DWMAC_CORE_5_00 0x50
@@ -8,8 +8,69 @@
#include <linux/device.h>
#include <linux/of_irq.h>
#include "stmmac.h"
+#include "dwmac_dma.h"
+#include "dwmac1000.h"
+
+/* Normal Loongson Tx Summary */
+#define DMA_INTR_ENA_NIE_TX_LOONGSON 0x00040000
+/* Normal Loongson Rx Summary */
+#define DMA_INTR_ENA_NIE_RX_LOONGSON 0x00020000
+
+#define DMA_INTR_NORMAL_LOONGSON (DMA_INTR_ENA_NIE_TX_LOONGSON | \
+ DMA_INTR_ENA_NIE_RX_LOONGSON | \
+ DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE)
+
+/* Abnormal Loongson Tx Summary */
+#define DMA_INTR_ENA_AIE_TX_LOONGSON 0x00010000
+/* Abnormal Loongson Rx Summary */
+#define DMA_INTR_ENA_AIE_RX_LOONGSON 0x00008000
+
+#define DMA_INTR_ABNORMAL_LOONGSON (DMA_INTR_ENA_AIE_TX_LOONGSON | \
+ DMA_INTR_ENA_AIE_RX_LOONGSON | \
+ DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE)
+
+#define DMA_INTR_DEFAULT_MASK_LOONGSON (DMA_INTR_NORMAL_LOONGSON | \
+ DMA_INTR_ABNORMAL_LOONGSON)
+
+/* Normal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_NIS_TX_LOONGSON 0x00040000
+/* Normal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_NIS_RX_LOONGSON 0x00020000
+
+/* Abnormal Loongson Tx Interrupt Summary */
+#define DMA_STATUS_AIS_TX_LOONGSON 0x00010000
+/* Abnormal Loongson Rx Interrupt Summary */
+#define DMA_STATUS_AIS_RX_LOONGSON 0x00008000
+
+/* Fatal Loongson Tx Bus Error Interrupt */
+#define DMA_STATUS_FBI_TX_LOONGSON 0x00002000
+/* Fatal Loongson Rx Bus Error Interrupt */
+#define DMA_STATUS_FBI_RX_LOONGSON 0x00001000
+
+#define DMA_STATUS_MSK_COMMON_LOONGSON (DMA_STATUS_NIS_TX_LOONGSON | \
+ DMA_STATUS_NIS_RX_LOONGSON | \
+ DMA_STATUS_AIS_TX_LOONGSON | \
+ DMA_STATUS_AIS_RX_LOONGSON | \
+ DMA_STATUS_FBI_TX_LOONGSON | \
+ DMA_STATUS_FBI_RX_LOONGSON)
+
+#define DMA_STATUS_MSK_RX_LOONGSON (DMA_STATUS_ERI | DMA_STATUS_RWT | \
+ DMA_STATUS_RPS | DMA_STATUS_RU | \
+ DMA_STATUS_RI | DMA_STATUS_OVF | \
+ DMA_STATUS_MSK_COMMON_LOONGSON)
+
+#define DMA_STATUS_MSK_TX_LOONGSON (DMA_STATUS_ETI | DMA_STATUS_UNF | \
+ DMA_STATUS_TJT | DMA_STATUS_TU | \
+ DMA_STATUS_TPS | DMA_STATUS_TI | \
+ DMA_STATUS_MSK_COMMON_LOONGSON)
#define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03
+#define DWMAC_CORE_LS_MULTICHAN 0x10 /* Loongson custom ID */
+#define CHANNEL_NUM 8
+
+struct loongson_data {
+ u32 loongson_id;
+};
struct stmmac_pci_info {
int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
@@ -56,10 +117,26 @@ static void loongson_default_data(struct pci_dev *pdev,
static int loongson_gmac_data(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat)
{
+ struct loongson_data *ld;
+ int i;
+
+ ld = plat->bsp_priv;
+
loongson_default_data(pdev, plat);
- plat->tx_queues_to_use = 1;
- plat->rx_queues_to_use = 1;
+ if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+ plat->rx_queues_to_use = CHANNEL_NUM;
+ plat->tx_queues_to_use = CHANNEL_NUM;
+
+ /* Only channel 0 supports checksum,
+ * so turn off checksum to enable multiple channels.
+ */
+ for (i = 1; i < CHANNEL_NUM; i++)
+ plat->tx_queues_cfg[i].coe_unsupported = 1;
+ } else {
+ plat->tx_queues_to_use = 1;
+ plat->rx_queues_to_use = 1;
+ }
plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
@@ -70,6 +147,233 @@ static struct stmmac_pci_info loongson_gmac_pci_info = {
.setup = loongson_gmac_data,
};
+static void loongson_dwmac_dma_init_channel(struct stmmac_priv *priv,
+ void __iomem *ioaddr,
+ struct stmmac_dma_cfg *dma_cfg,
+ u32 chan)
+{
+ int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl;
+ int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl;
+ u32 value;
+
+ value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+ if (dma_cfg->pblx8)
+ value |= DMA_BUS_MODE_MAXPBL;
+
+ value |= DMA_BUS_MODE_USP;
+ value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK);
+ value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT);
+ value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT);
+
+ /* Set the Fixed burst mode */
+ if (dma_cfg->fixed_burst)
+ value |= DMA_BUS_MODE_FB;
+
+ /* Mixed Burst has no effect when fb is set */
+ if (dma_cfg->mixed_burst)
+ value |= DMA_BUS_MODE_MB;
+
+ if (dma_cfg->atds)
+ value |= DMA_BUS_MODE_ATDS;
+
+ if (dma_cfg->aal)
+ value |= DMA_BUS_MODE_AAL;
+
+ writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan));
+
+ /* Mask interrupts by writing to CSR7 */
+ writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr +
+ DMA_CHAN_INTR_ENA(chan));
+}
+
+static int loongson_dwmac_dma_interrupt(struct stmmac_priv *priv,
+ void __iomem *ioaddr,
+ struct stmmac_extra_stats *x,
+ u32 chan, u32 dir)
+{
+ struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats);
+ u32 abnor_intr_status;
+ u32 nor_intr_status;
+ u32 fb_intr_status;
+ u32 intr_status;
+ int ret = 0;
+
+ /* read the status register (CSR5) */
+ intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
+
+ if (dir == DMA_DIR_RX)
+ intr_status &= DMA_STATUS_MSK_RX_LOONGSON;
+ else if (dir == DMA_DIR_TX)
+ intr_status &= DMA_STATUS_MSK_TX_LOONGSON;
+
+ nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON |
+ DMA_STATUS_NIS_RX_LOONGSON);
+ abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON |
+ DMA_STATUS_AIS_RX_LOONGSON);
+ fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON |
+ DMA_STATUS_FBI_RX_LOONGSON);
+
+ /* ABNORMAL interrupts */
+ if (unlikely(abnor_intr_status)) {
+ if (unlikely(intr_status & DMA_STATUS_UNF)) {
+ ret = tx_hard_error_bump_tc;
+ x->tx_undeflow_irq++;
+ }
+ if (unlikely(intr_status & DMA_STATUS_TJT))
+ x->tx_jabber_irq++;
+ if (unlikely(intr_status & DMA_STATUS_OVF))
+ x->rx_overflow_irq++;
+ if (unlikely(intr_status & DMA_STATUS_RU))
+ x->rx_buf_unav_irq++;
+ if (unlikely(intr_status & DMA_STATUS_RPS))
+ x->rx_process_stopped_irq++;
+ if (unlikely(intr_status & DMA_STATUS_RWT))
+ x->rx_watchdog_irq++;
+ if (unlikely(intr_status & DMA_STATUS_ETI))
+ x->tx_early_irq++;
+ if (unlikely(intr_status & DMA_STATUS_TPS)) {
+ x->tx_process_stopped_irq++;
+ ret = tx_hard_error;
+ }
+ if (unlikely(fb_intr_status)) {
+ x->fatal_bus_error_irq++;
+ ret = tx_hard_error;
+ }
+ }
+ /* TX/RX NORMAL interrupts */
+ if (likely(nor_intr_status)) {
+ if (likely(intr_status & DMA_STATUS_RI)) {
+ u32 value = readl(ioaddr + DMA_INTR_ENA);
+ /* to schedule NAPI on real RIE event. */
+ if (likely(value & DMA_INTR_ENA_RIE)) {
+ u64_stats_update_begin(&stats->syncp);
+ u64_stats_inc(&stats->rx_normal_irq_n[chan]);
+ u64_stats_update_end(&stats->syncp);
+ ret |= handle_rx;
+ }
+ }
+ if (likely(intr_status & DMA_STATUS_TI)) {
+ u64_stats_update_begin(&stats->syncp);
+ u64_stats_inc(&stats->tx_normal_irq_n[chan]);
+ u64_stats_update_end(&stats->syncp);
+ ret |= handle_tx;
+ }
+ if (unlikely(intr_status & DMA_STATUS_ERI))
+ x->rx_early_irq++;
+ }
+ /* Optional hardware blocks, interrupts should be disabled */
+ if (unlikely(intr_status &
+ (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI)))
+ pr_warn("%s: unexpected status %08x\n", __func__, intr_status);
+
+ /* Clear the interrupt by writing a logic 1 to the CSR5[19-0] */
+ writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan));
+
+ return ret;
+}
+
+static struct mac_device_info *loongson_dwmac_setup(void *apriv)
+{
+ struct stmmac_priv *priv = apriv;
+ struct mac_device_info *mac;
+ struct stmmac_dma_ops *dma;
+ struct loongson_data *ld;
+
+ ld = priv->plat->bsp_priv;
+
+ mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL);
+ if (!mac)
+ return NULL;
+
+ dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return NULL;
+
+ /* The Loongson GMAC devices are based on the DW GMAC
+ * v3.50a and v3.73a IP-cores. But the HW designers have changed the
+ * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the
+ * network controllers with the multi-channels feature
+ * available to emphasize the differences: multiple DMA-channels,
+ * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the
+ * original value so the correct HW-interface would be selected.
+ */
+ if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) {
+ priv->synopsys_id = DWMAC_CORE_3_70;
+ *dma = dwmac1000_dma_ops;
+ dma->init_chan = loongson_dwmac_dma_init_channel;
+ dma->dma_interrupt = loongson_dwmac_dma_interrupt;
+ mac->dma = dma;
+ }
+
+ priv->dev->priv_flags |= IFF_UNICAST_FLT;
+
+ /* Pre-initialize the respective "mac" fields as it's done in
+ * dwmac1000_setup()
+ */
+ mac->pcsr = priv->ioaddr;
+ mac->multicast_filter_bins = priv->plat->multicast_filter_bins;
+ mac->unicast_filter_entries = priv->plat->unicast_filter_entries;
+ mac->mcast_bits_log2 = 0;
+
+ if (mac->multicast_filter_bins)
+ mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins);
+
+ /* Loongson GMAC doesn't support the flow control. */
+ mac->link.caps = MAC_10 | MAC_100 | MAC_1000;
+
+ mac->link.duplex = GMAC_CONTROL_DM;
+ mac->link.speed10 = GMAC_CONTROL_PS;
+ mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+ mac->link.speed1000 = 0;
+ mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES;
+ mac->mii.addr = GMAC_MII_ADDR;
+ mac->mii.data = GMAC_MII_DATA;
+ mac->mii.addr_shift = 11;
+ mac->mii.addr_mask = 0x0000F800;
+ mac->mii.reg_shift = 6;
+ mac->mii.reg_mask = 0x000007C0;
+ mac->mii.clk_csr_shift = 2;
+ mac->mii.clk_csr_mask = GENMASK(5, 2);
+
+ return mac;
+}
+
+static int loongson_dwmac_msi_config(struct pci_dev *pdev,
+ struct plat_stmmacenet_data *plat,
+ struct stmmac_resources *res)
+{
+ int i, ret, vecs;
+
+ vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1);
+ ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI);
+ if (ret < 0) {
+ dev_warn(&pdev->dev, "Failed to allocate MSI IRQs\n");
+ return ret;
+ }
+
+ res->irq = pci_irq_vector(pdev, 0);
+
+ for (i = 0; i < plat->rx_queues_to_use; i++) {
+ res->rx_irq[CHANNEL_NUM - 1 - i] =
+ pci_irq_vector(pdev, 1 + i * 2);
+ }
+
+ for (i = 0; i < plat->tx_queues_to_use; i++) {
+ res->tx_irq[CHANNEL_NUM - 1 - i] =
+ pci_irq_vector(pdev, 2 + i * 2);
+ }
+
+ plat->flags |= STMMAC_FLAG_MULTI_MSI_EN;
+
+ return 0;
+}
+
+static void loongson_dwmac_msi_clear(struct pci_dev *pdev)
+{
+ pci_free_irq_vectors(pdev);
+}
+
static int loongson_dwmac_dt_config(struct pci_dev *pdev,
struct plat_stmmacenet_data *plat,
struct stmmac_resources *res)
@@ -146,6 +450,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
struct plat_stmmacenet_data *plat;
struct stmmac_pci_info *info;
struct stmmac_resources res;
+ struct loongson_data *ld;
int ret, i;
plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
@@ -162,6 +467,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
if (!plat->dma_cfg)
return -ENOMEM;
+ ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL);
+ if (!ld)
+ return -ENOMEM;
+
/* Enable pci device */
ret = pci_enable_device(pdev);
if (ret) {
@@ -184,6 +493,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
memset(&res, 0, sizeof(res));
res.addr = pcim_iomap_table(pdev)[0];
+ plat->bsp_priv = ld;
+ plat->setup = loongson_dwmac_setup;
+ ld->loongson_id = readl(res.addr + GMAC_VERSION) & 0xff;
+
info = (struct stmmac_pci_info *)id->driver_data;
ret = info->setup(pdev, plat);
if (ret)
@@ -196,6 +509,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
if (ret)
goto err_disable_device;
+ /* Use the common MAC IRQ if per-channel MSIs allocation failed */
+ if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+ loongson_dwmac_msi_config(pdev, plat, &res);
+
ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
if (ret)
goto err_plat_clear;
@@ -205,6 +522,8 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
err_plat_clear:
if (dev_of_node(&pdev->dev))
loongson_dwmac_dt_clear(pdev, plat);
+ else if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+ loongson_dwmac_msi_clear(pdev);
err_disable_device:
pci_disable_device(pdev);
return ret;
@@ -217,8 +536,10 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
{
struct net_device *ndev = dev_get_drvdata(&pdev->dev);
struct stmmac_priv *priv = netdev_priv(ndev);
+ struct loongson_data *ld;
int i;
+ ld = priv->plat->bsp_priv;
of_node_put(priv->plat->mdio_node);
stmmac_dvr_remove(&pdev->dev);
@@ -232,6 +553,9 @@ static void loongson_dwmac_remove(struct pci_dev *pdev)
break;
}
+ if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN)
+ loongson_dwmac_msi_clear(pdev);
+
pci_disable_device(pdev);
}
The Loongson DWMAC driver currently supports the Loongson GMAC devices (based on the DW GMAC v3.50a/v3.73a IP-core) installed to the LS2K1000 SoC and LS7A1000 chipset. But recently a new generation LS2K2000 SoC was released with the new version of the Loongson GMAC synthesized in. The new controller is based on the DW GMAC v3.73a IP-core with the AV-feature enabled, which implies the multi DMA-channels support. The multi DMA-channels feature has the next vendor-specific peculiarities: 1. Split up Tx and Rx DMA IRQ status/mask bits: Name Tx Rx DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000; DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000; DMA_STATUS_NIS = 0x00040000 | 0x00020000; DMA_STATUS_AIS = 0x00010000 | 0x00008000; DMA_STATUS_FBI = 0x00002000 | 0x00001000; 2. Custom Synopsys ID hardwired into the GMAC_VERSION.SNPSVER register field. It's 0x10 while it should have been 0x37 in accordance with the actual DW GMAC IP-core version. 3. There are eight DMA-channels available meanwhile the Synopsys DW GMAC IP-core supports up to three DMA-channels. 4. It's possible to have each DMA-channel IRQ independently delivered. The MSI IRQs must be utilized for that. Thus in order to have the multi-channels Loongson GMAC controllers supported let's modify the Loongson DWMAC driver in accordance with all the peculiarities described above: 1. Create the multi-channels Loongson GMAC-specific stmmac_dma_ops::dma_interrupt() stmmac_dma_ops::init_chan() callbacks due to the non-standard DMA IRQ CSR flags layout. 2. Create the Loongson DWMAC-specific platform setup() method which gets to initialize the DMA-ops with the dwmac1000_dma_ops instance and overrides the callbacks described in 1. The method also overrides the custom Synopsys ID with the real one in order to have the rest of the HW-specific callbacks correctly detected by the driver core. 3. Make sure the platform setup() method enables the flow control and duplex modes supported by the controller. Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn> Signed-off-by: Yinggang Gu <guyinggang@loongson.cn> Acked-by: Huacai Chen <chenhuacai@loongson.cn> Signed-off-by: Yanteng Si <siyanteng@loongson.cn> --- drivers/net/ethernet/stmicro/stmmac/common.h | 1 + .../ethernet/stmicro/stmmac/dwmac-loongson.c | 328 +++++++++++++++++- 2 files changed, 327 insertions(+), 2 deletions(-)