@@ -291,9 +291,11 @@ M: Bertrand Marquis <bertrand.marquis@arm.com>
M: Michal Orzel <michal.orzel@amd.com>
S: Supported
F: xen/common/libfdt/
+F: xen/common/device-tree/
F: xen/common/device_tree.c
F: xen/common/dt-overlay.c
F: xen/include/xen/libfdt/
+F: xen/include/xen/bootfdt.h
F: xen/include/xen/device_tree.h
F: xen/drivers/passthrough/device_tree.c
@@ -3,159 +3,11 @@
#include <public/version.h>
#include <asm/p2m.h>
+#include <xen/bootfdt.h>
#include <xen/device_tree.h>
-#define MIN_FDT_ALIGN 8
#define MAX_FDT_SIZE SZ_2M
-#define NR_MEM_BANKS 256
-#define NR_SHMEM_BANKS 32
-
-#define MAX_MODULES 32 /* Current maximum useful modules */
-
-typedef enum {
- BOOTMOD_XEN,
- BOOTMOD_FDT,
- BOOTMOD_KERNEL,
- BOOTMOD_RAMDISK,
- BOOTMOD_XSM,
- BOOTMOD_GUEST_DTB,
- BOOTMOD_UNKNOWN
-} bootmodule_kind;
-
-enum membank_type {
- /*
- * The MEMBANK_DEFAULT type refers to either reserved memory for the
- * device/firmware (when the bank is in 'reserved_mem') or any RAM (when
- * the bank is in 'mem').
- */
- MEMBANK_DEFAULT,
- /*
- * The MEMBANK_STATIC_DOMAIN type is used to indicate whether the memory
- * bank is bound to a static Xen domain. It is only valid when the bank
- * is in reserved_mem.
- */
- MEMBANK_STATIC_DOMAIN,
- /*
- * The MEMBANK_STATIC_HEAP type is used to indicate whether the memory
- * bank is reserved as static heap. It is only valid when the bank is
- * in reserved_mem.
- */
- MEMBANK_STATIC_HEAP,
- /*
- * The MEMBANK_FDT_RESVMEM type is used to indicate whether the memory
- * bank is from the FDT reserve map.
- */
- MEMBANK_FDT_RESVMEM,
-};
-
-/* Indicates the maximum number of characters(\0 included) for shm_id */
-#define MAX_SHM_ID_LENGTH 16
-
-struct shmem_membank_extra {
- char shm_id[MAX_SHM_ID_LENGTH];
- unsigned int nr_shm_borrowers;
-};
-
-struct membank {
- paddr_t start;
- paddr_t size;
- union {
- enum membank_type type;
-#ifdef CONFIG_STATIC_SHM
- struct shmem_membank_extra *shmem_extra;
-#endif
- };
-};
-
-struct membanks {
- __struct_group(membanks_hdr, common, ,
- unsigned int nr_banks;
- unsigned int max_banks;
- );
- struct membank bank[];
-};
-
-struct meminfo {
- struct membanks_hdr common;
- struct membank bank[NR_MEM_BANKS];
-};
-
-struct shared_meminfo {
- struct membanks_hdr common;
- struct membank bank[NR_SHMEM_BANKS];
- struct shmem_membank_extra extra[NR_SHMEM_BANKS];
-};
-
-/*
- * The domU flag is set for kernels and ramdisks of "xen,domain" nodes.
- * The purpose of the domU flag is to avoid getting confused in
- * kernel_probe, where we try to guess which is the dom0 kernel and
- * initrd to be compatible with all versions of the multiboot spec.
- */
-#define BOOTMOD_MAX_CMDLINE 1024
-struct bootmodule {
- bootmodule_kind kind;
- bool domU;
- paddr_t start;
- paddr_t size;
-};
-
-/* DT_MAX_NAME is the node name max length according the DT spec */
-#define DT_MAX_NAME 41
-struct bootcmdline {
- bootmodule_kind kind;
- bool domU;
- paddr_t start;
- char dt_name[DT_MAX_NAME];
- char cmdline[BOOTMOD_MAX_CMDLINE];
-};
-
-struct bootmodules {
- int nr_mods;
- struct bootmodule module[MAX_MODULES];
-};
-
-struct bootcmdlines {
- unsigned int nr_mods;
- struct bootcmdline cmdline[MAX_MODULES];
-};
-
-struct bootinfo {
- struct meminfo mem;
- /* The reserved regions are only used when booting using Device-Tree */
- struct meminfo reserved_mem;
- struct bootmodules modules;
- struct bootcmdlines cmdlines;
-#ifdef CONFIG_ACPI
- struct meminfo acpi;
-#endif
-#ifdef CONFIG_STATIC_SHM
- struct shared_meminfo shmem;
-#endif
- bool static_heap;
-};
-
-#ifdef CONFIG_ACPI
-#define BOOTINFO_ACPI_INIT .acpi.common.max_banks = NR_MEM_BANKS,
-#else
-#define BOOTINFO_ACPI_INIT
-#endif
-
-#ifdef CONFIG_STATIC_SHM
-#define BOOTINFO_SHMEM_INIT .shmem.common.max_banks = NR_SHMEM_BANKS,
-#else
-#define BOOTINFO_SHMEM_INIT
-#endif
-
-#define BOOTINFO_INIT \
-{ \
- .mem.common.max_banks = NR_MEM_BANKS, \
- .reserved_mem.common.max_banks = NR_MEM_BANKS, \
- BOOTINFO_ACPI_INIT \
- BOOTINFO_SHMEM_INIT \
-}
-
struct map_range_data
{
struct domain *d;
@@ -167,39 +19,8 @@ struct map_range_data
struct rangeset *irq_ranges;
};
-extern struct bootinfo bootinfo;
-
extern domid_t max_init_domid;
-static inline struct membanks *bootinfo_get_mem(void)
-{
- return container_of(&bootinfo.mem.common, struct membanks, common);
-}
-
-static inline struct membanks *bootinfo_get_reserved_mem(void)
-{
- return container_of(&bootinfo.reserved_mem.common, struct membanks, common);
-}
-
-#ifdef CONFIG_ACPI
-static inline struct membanks *bootinfo_get_acpi(void)
-{
- return container_of(&bootinfo.acpi.common, struct membanks, common);
-}
-#endif
-
-#ifdef CONFIG_STATIC_SHM
-static inline struct membanks *bootinfo_get_shmem(void)
-{
- return container_of(&bootinfo.shmem.common, struct membanks, common);
-}
-
-static inline struct shmem_membank_extra *bootinfo_get_shmem_extra(void)
-{
- return bootinfo.shmem.extra;
-}
-#endif
-
void copy_from_paddr(void *dst, paddr_t paddr, unsigned long len);
size_t estimate_efi_size(unsigned int mem_nr_banks);
@@ -220,9 +41,6 @@ void fw_unreserved_regions(paddr_t s, paddr_t e,
void (*cb)(paddr_t ps, paddr_t pe),
unsigned int first);
-size_t boot_fdt_info(const void *fdt, paddr_t paddr);
-const char *boot_fdt_cmdline(const void *fdt);
-
bool check_reserved_regions_overlap(paddr_t region_start, paddr_t region_size);
struct bootmodule *add_boot_module(bootmodule_kind kind,
@@ -237,7 +55,6 @@ struct bootcmdline * boot_cmdline_find_by_name(const char *name);
const char *boot_module_kind_as_string(bootmodule_kind kind);
void init_pdx(void);
-void populate_boot_allocator(void);
void setup_mm(void);
extern uint32_t hyp_traps_vector[];
@@ -48,8 +48,6 @@
#include <xsm/xsm.h>
#include <asm/acpi.h>
-struct bootinfo __initdata bootinfo = BOOTINFO_INIT;
-
/*
* Sanitized version of cpuinfo containing only features available on all
* cores (only on arm64 as there is no sanitization support on arm32).
@@ -203,321 +201,6 @@ static void __init processor_id(void)
processor_setup();
}
-static void __init dt_unreserved_regions(paddr_t s, paddr_t e,
- void (*cb)(paddr_t ps, paddr_t pe),
- unsigned int first)
-{
- const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
-#ifdef CONFIG_STATIC_SHM
- const struct membanks *shmem = bootinfo_get_shmem();
- unsigned int offset;
-#endif
- unsigned int i;
-
- /*
- * i is the current bootmodule we are evaluating across all possible
- * kinds.
- */
- for ( i = first; i < reserved_mem->nr_banks; i++ )
- {
- paddr_t r_s = reserved_mem->bank[i].start;
- paddr_t r_e = r_s + reserved_mem->bank[i].size;
-
- if ( s < r_e && r_s < e )
- {
- dt_unreserved_regions(r_e, e, cb, i + 1);
- dt_unreserved_regions(s, r_s, cb, i + 1);
- return;
- }
- }
-
-#ifdef CONFIG_STATIC_SHM
- /*
- * When retrieving the corresponding shared memory addresses
- * below, we need to index the shmem->bank starting from 0, hence
- * we need to use i - reserved_mem->nr_banks.
- */
- offset = reserved_mem->nr_banks;
- for ( ; i - offset < shmem->nr_banks; i++ )
- {
- paddr_t r_s, r_e;
-
- r_s = shmem->bank[i - offset].start;
-
- /* Shared memory banks can contain INVALID_PADDR as start */
- if ( INVALID_PADDR == r_s )
- continue;
-
- r_e = r_s + shmem->bank[i - offset].size;
-
- if ( s < r_e && r_s < e )
- {
- dt_unreserved_regions(r_e, e, cb, i + 1);
- dt_unreserved_regions(s, r_s, cb, i + 1);
- return;
- }
- }
-#endif
-
- cb(s, e);
-}
-
-/*
- * TODO: '*_end' could be 0 if the bank/region is at the end of the physical
- * address space. This is for now not handled as it requires more rework.
- */
-static bool __init meminfo_overlap_check(const struct membanks *mem,
- paddr_t region_start,
- paddr_t region_size)
-{
- paddr_t bank_start = INVALID_PADDR, bank_end = 0;
- paddr_t region_end = region_start + region_size;
- unsigned int i, bank_num = mem->nr_banks;
-
- for ( i = 0; i < bank_num; i++ )
- {
- bank_start = mem->bank[i].start;
- bank_end = bank_start + mem->bank[i].size;
-
- if ( INVALID_PADDR == bank_start || region_end <= bank_start ||
- region_start >= bank_end )
- continue;
- else
- {
- printk("Region: [%#"PRIpaddr", %#"PRIpaddr") overlapping with bank[%u]: [%#"PRIpaddr", %#"PRIpaddr")\n",
- region_start, region_end, i, bank_start, bank_end);
- return true;
- }
- }
-
- return false;
-}
-
-/*
- * TODO: '*_end' could be 0 if the module/region is at the end of the physical
- * address space. This is for now not handled as it requires more rework.
- */
-static bool __init bootmodules_overlap_check(struct bootmodules *bootmodules,
- paddr_t region_start,
- paddr_t region_size)
-{
- paddr_t mod_start = INVALID_PADDR, mod_end = 0;
- paddr_t region_end = region_start + region_size;
- unsigned int i, mod_num = bootmodules->nr_mods;
-
- for ( i = 0; i < mod_num; i++ )
- {
- mod_start = bootmodules->module[i].start;
- mod_end = mod_start + bootmodules->module[i].size;
-
- if ( region_end <= mod_start || region_start >= mod_end )
- continue;
- else
- {
- printk("Region: [%#"PRIpaddr", %#"PRIpaddr") overlapping with mod[%u]: [%#"PRIpaddr", %#"PRIpaddr")\n",
- region_start, region_end, i, mod_start, mod_end);
- return true;
- }
- }
-
- return false;
-}
-
-void __init fw_unreserved_regions(paddr_t s, paddr_t e,
- void (*cb)(paddr_t ps, paddr_t pe),
- unsigned int first)
-{
- if ( acpi_disabled )
- dt_unreserved_regions(s, e, cb, first);
- else
- cb(s, e);
-}
-
-/*
- * Given an input physical address range, check if this range is overlapping
- * with the existing reserved memory regions defined in bootinfo.
- * Return true if the input physical address range is overlapping with any
- * existing reserved memory regions, otherwise false.
- */
-bool __init check_reserved_regions_overlap(paddr_t region_start,
- paddr_t region_size)
-{
- const struct membanks *mem_banks[] = {
- bootinfo_get_reserved_mem(),
-#ifdef CONFIG_ACPI
- bootinfo_get_acpi(),
-#endif
-#ifdef CONFIG_STATIC_SHM
- bootinfo_get_shmem(),
-#endif
- };
- unsigned int i;
-
- /*
- * Check if input region is overlapping with reserved memory banks or
- * ACPI EfiACPIReclaimMemory (when ACPI feature is enabled) or static
- * shared memory banks (when static shared memory feature is enabled)
- */
- for ( i = 0; i < ARRAY_SIZE(mem_banks); i++ )
- if ( meminfo_overlap_check(mem_banks[i], region_start, region_size) )
- return true;
-
- /* Check if input region is overlapping with bootmodules */
- if ( bootmodules_overlap_check(&bootinfo.modules,
- region_start, region_size) )
- return true;
-
- return false;
-}
-
-struct bootmodule __init *add_boot_module(bootmodule_kind kind,
- paddr_t start, paddr_t size,
- bool domU)
-{
- struct bootmodules *mods = &bootinfo.modules;
- struct bootmodule *mod;
- unsigned int i;
-
- if ( mods->nr_mods == MAX_MODULES )
- {
- printk("Ignoring %s boot module at %"PRIpaddr"-%"PRIpaddr" (too many)\n",
- boot_module_kind_as_string(kind), start, start + size);
- return NULL;
- }
-
- if ( check_reserved_regions_overlap(start, size) )
- return NULL;
-
- for ( i = 0 ; i < mods->nr_mods ; i++ )
- {
- mod = &mods->module[i];
- if ( mod->kind == kind && mod->start == start )
- {
- if ( !domU )
- mod->domU = false;
- return mod;
- }
- }
-
- mod = &mods->module[mods->nr_mods++];
- mod->kind = kind;
- mod->start = start;
- mod->size = size;
- mod->domU = domU;
-
- return mod;
-}
-
-/*
- * boot_module_find_by_kind can only be used to return Xen modules (e.g
- * XSM, DTB) or Dom0 modules. This is not suitable for looking up guest
- * modules.
- */
-struct bootmodule * __init boot_module_find_by_kind(bootmodule_kind kind)
-{
- struct bootmodules *mods = &bootinfo.modules;
- struct bootmodule *mod;
- int i;
- for (i = 0 ; i < mods->nr_mods ; i++ )
- {
- mod = &mods->module[i];
- if ( mod->kind == kind && !mod->domU )
- return mod;
- }
- return NULL;
-}
-
-void __init add_boot_cmdline(const char *name, const char *cmdline,
- bootmodule_kind kind, paddr_t start, bool domU)
-{
- struct bootcmdlines *cmds = &bootinfo.cmdlines;
- struct bootcmdline *cmd;
-
- if ( cmds->nr_mods == MAX_MODULES )
- {
- printk("Ignoring %s cmdline (too many)\n", name);
- return;
- }
-
- cmd = &cmds->cmdline[cmds->nr_mods++];
- cmd->kind = kind;
- cmd->domU = domU;
- cmd->start = start;
-
- ASSERT(strlen(name) <= DT_MAX_NAME);
- safe_strcpy(cmd->dt_name, name);
-
- if ( strlen(cmdline) > BOOTMOD_MAX_CMDLINE )
- panic("module %s command line too long\n", name);
- safe_strcpy(cmd->cmdline, cmdline);
-}
-
-/*
- * boot_cmdline_find_by_kind can only be used to return Xen modules (e.g
- * XSM, DTB) or Dom0 modules. This is not suitable for looking up guest
- * modules.
- */
-struct bootcmdline * __init boot_cmdline_find_by_kind(bootmodule_kind kind)
-{
- struct bootcmdlines *cmds = &bootinfo.cmdlines;
- struct bootcmdline *cmd;
- int i;
-
- for ( i = 0 ; i < cmds->nr_mods ; i++ )
- {
- cmd = &cmds->cmdline[i];
- if ( cmd->kind == kind && !cmd->domU )
- return cmd;
- }
- return NULL;
-}
-
-struct bootcmdline * __init boot_cmdline_find_by_name(const char *name)
-{
- struct bootcmdlines *mods = &bootinfo.cmdlines;
- struct bootcmdline *mod;
- unsigned int i;
-
- for (i = 0 ; i < mods->nr_mods ; i++ )
- {
- mod = &mods->cmdline[i];
- if ( strcmp(mod->dt_name, name) == 0 )
- return mod;
- }
- return NULL;
-}
-
-struct bootmodule * __init boot_module_find_by_addr_and_kind(bootmodule_kind kind,
- paddr_t start)
-{
- struct bootmodules *mods = &bootinfo.modules;
- struct bootmodule *mod;
- unsigned int i;
-
- for (i = 0 ; i < mods->nr_mods ; i++ )
- {
- mod = &mods->module[i];
- if ( mod->kind == kind && mod->start == start )
- return mod;
- }
- return NULL;
-}
-
-const char * __init boot_module_kind_as_string(bootmodule_kind kind)
-{
- switch ( kind )
- {
- case BOOTMOD_XEN: return "Xen";
- case BOOTMOD_FDT: return "Device Tree";
- case BOOTMOD_KERNEL: return "Kernel";
- case BOOTMOD_RAMDISK: return "Ramdisk";
- case BOOTMOD_XSM: return "XSM";
- case BOOTMOD_GUEST_DTB: return "DTB";
- case BOOTMOD_UNKNOWN: return "Unknown";
- default: BUG();
- }
-}
-
void __init discard_initial_modules(void)
{
struct bootmodules *mi = &bootinfo.modules;
@@ -556,40 +239,6 @@ static void * __init relocate_fdt(paddr_t dtb_paddr, size_t dtb_size)
return fdt;
}
-/*
- * Return the end of the non-module region starting at s. In other
- * words return s the start of the next modules after s.
- *
- * On input *end is the end of the region which should be considered
- * and it is updated to reflect the end of the module, clipped to the
- * end of the region if it would run over.
- */
-static paddr_t __init next_module(paddr_t s, paddr_t *end)
-{
- struct bootmodules *mi = &bootinfo.modules;
- paddr_t lowest = ~(paddr_t)0;
- int i;
-
- for ( i = 0; i < mi->nr_mods; i++ )
- {
- paddr_t mod_s = mi->module[i].start;
- paddr_t mod_e = mod_s + mi->module[i].size;
-
- if ( !mi->module[i].size )
- continue;
-
- if ( mod_s < s )
- continue;
- if ( mod_s > lowest )
- continue;
- if ( mod_s > *end )
- continue;
- lowest = mod_s;
- *end = min(*end, mod_e);
- }
- return lowest;
-}
-
void __init init_pdx(void)
{
const struct membanks *mem = bootinfo_get_mem();
@@ -635,87 +284,6 @@ void __init init_pdx(void)
}
}
-/*
- * Populate the boot allocator.
- * If a static heap was not provided by the admin, all the RAM but the
- * following regions will be added:
- * - Modules (e.g., Xen, Kernel)
- * - Reserved regions
- * - Xenheap (arm32 only)
- * If a static heap was provided by the admin, populate the boot
- * allocator with the corresponding regions only, but with Xenheap excluded
- * on arm32.
- */
-void __init populate_boot_allocator(void)
-{
- unsigned int i;
- const struct membanks *banks = bootinfo_get_mem();
- const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
- paddr_t s, e;
-
- if ( bootinfo.static_heap )
- {
- for ( i = 0 ; i < reserved_mem->nr_banks; i++ )
- {
- if ( reserved_mem->bank[i].type != MEMBANK_STATIC_HEAP )
- continue;
-
- s = reserved_mem->bank[i].start;
- e = s + reserved_mem->bank[i].size;
-#ifdef CONFIG_ARM_32
- /* Avoid the xenheap, note that the xenheap cannot across a bank */
- if ( s <= mfn_to_maddr(directmap_mfn_start) &&
- e >= mfn_to_maddr(directmap_mfn_end) )
- {
- init_boot_pages(s, mfn_to_maddr(directmap_mfn_start));
- init_boot_pages(mfn_to_maddr(directmap_mfn_end), e);
- }
- else
-#endif
- init_boot_pages(s, e);
- }
-
- return;
- }
-
- for ( i = 0; i < banks->nr_banks; i++ )
- {
- const struct membank *bank = &banks->bank[i];
- paddr_t bank_end = bank->start + bank->size;
-
- s = bank->start;
- while ( s < bank_end )
- {
- paddr_t n = bank_end;
-
- e = next_module(s, &n);
-
- if ( e == ~(paddr_t)0 )
- e = n = bank_end;
-
- /*
- * Module in a RAM bank other than the one which we are
- * not dealing with here.
- */
- if ( e > bank_end )
- e = bank_end;
-
-#ifdef CONFIG_ARM_32
- /* Avoid the xenheap */
- if ( s < mfn_to_maddr(directmap_mfn_end) &&
- mfn_to_maddr(directmap_mfn_start) < e )
- {
- e = mfn_to_maddr(directmap_mfn_start);
- n = mfn_to_maddr(directmap_mfn_end);
- }
-#endif
-
- fw_unreserved_regions(s, e, init_boot_pages, 0);
- s = n;
- }
- }
-}
-
size_t __read_mostly dcache_line_bytes;
/* C entry point for boot CPU */
@@ -6,7 +6,7 @@ obj-$(CONFIG_HYPFS_CONFIG) += config_data.o
obj-$(CONFIG_CORE_PARKING) += core_parking.o
obj-y += cpu.o
obj-$(CONFIG_DEBUG_TRACE) += debugtrace.o
-obj-$(CONFIG_HAS_DEVICE_TREE) += device_tree.o
+obj-$(CONFIG_HAS_DEVICE_TREE) += device-tree/
obj-$(CONFIG_IOREQ_SERVER) += dm.o
obj-y += domain.o
obj-$(CONFIG_OVERLAY_DTB) += dt-overlay.o
new file mode 100644
@@ -0,0 +1,2 @@
+obj-y += bootinfo.init.o
+obj-y += device_tree.o
new file mode 100644
@@ -0,0 +1,459 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Derived from Xen 4.19's $xen/arch/arm/setup.c.
+ *
+ * bookkeeping routines.
+ *
+ * Tim Deegan <tim@xen.org>
+ * Copyright (c) 2011 Citrix Systems.
+ * Copyright (c) 2024 Raptor Engineering LLC
+ */
+
+#include <xen/acpi.h>
+#include <xen/bootfdt.h>
+#include <xen/bug.h>
+#include <xen/device_tree.h>
+#include <xen/init.h>
+#include <xen/libfdt/libfdt-xen.h>
+#include <xen/mm.h>
+
+struct bootinfo __initdata bootinfo = BOOTINFO_INIT;
+
+const char * __init boot_module_kind_as_string(bootmodule_kind kind)
+{
+ switch ( kind )
+ {
+ case BOOTMOD_XEN: return "Xen";
+ case BOOTMOD_FDT: return "Device Tree";
+ case BOOTMOD_KERNEL: return "Kernel";
+ case BOOTMOD_RAMDISK: return "Ramdisk";
+ case BOOTMOD_XSM: return "XSM";
+ case BOOTMOD_GUEST_DTB: return "DTB";
+ case BOOTMOD_UNKNOWN: return "Unknown";
+ default: BUG();
+ }
+}
+
+static void __init dt_unreserved_regions(paddr_t s, paddr_t e,
+ void (*cb)(paddr_t ps, paddr_t pe),
+ unsigned int first)
+{
+ const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
+#ifdef CONFIG_STATIC_SHM
+ const struct membanks *shmem = bootinfo_get_shmem();
+ unsigned int offset;
+#endif
+ unsigned int i;
+
+ /*
+ * i is the current bootmodule we are evaluating across all possible
+ * kinds.
+ */
+ for ( i = first; i < reserved_mem->nr_banks; i++ )
+ {
+ paddr_t r_s = reserved_mem->bank[i].start;
+ paddr_t r_e = r_s + reserved_mem->bank[i].size;
+
+ if ( s < r_e && r_s < e )
+ {
+ dt_unreserved_regions(r_e, e, cb, i + 1);
+ dt_unreserved_regions(s, r_s, cb, i + 1);
+ return;
+ }
+ }
+
+#ifdef CONFIG_STATIC_SHM
+ /*
+ * When retrieving the corresponding shared memory addresses
+ * below, we need to index the shmem->bank starting from 0, hence
+ * we need to use i - reserved_mem->nr_banks.
+ */
+ offset = reserved_mem->nr_banks;
+ for ( ; i - offset < shmem->nr_banks; i++ )
+ {
+ paddr_t r_s, r_e;
+
+ r_s = shmem->bank[i - offset].start;
+
+ /* Shared memory banks can contain INVALID_PADDR as start */
+ if ( INVALID_PADDR == r_s )
+ continue;
+
+ r_e = r_s + shmem->bank[i - offset].size;
+
+ if ( s < r_e && r_s < e )
+ {
+ dt_unreserved_regions(r_e, e, cb, i + 1);
+ dt_unreserved_regions(s, r_s, cb, i + 1);
+ return;
+ }
+ }
+#endif
+
+ cb(s, e);
+}
+
+/*
+ * TODO: '*_end' could be 0 if the bank/region is at the end of the physical
+ * address space. This is for now not handled as it requires more rework.
+ */
+static bool __init meminfo_overlap_check(const struct membanks *mem,
+ paddr_t region_start,
+ paddr_t region_size)
+{
+ paddr_t bank_start = INVALID_PADDR, bank_end = 0;
+ paddr_t region_end = region_start + region_size;
+ unsigned int i, bank_num = mem->nr_banks;
+
+ for ( i = 0; i < bank_num; i++ )
+ {
+ bank_start = mem->bank[i].start;
+ bank_end = bank_start + mem->bank[i].size;
+
+ if ( INVALID_PADDR == bank_start || region_end <= bank_start ||
+ region_start >= bank_end )
+ continue;
+ else
+ {
+ printk("Region: [%#"PRIpaddr", %#"PRIpaddr") overlapping with bank[%u]: [%#"PRIpaddr", %#"PRIpaddr")\n",
+ region_start, region_end, i, bank_start, bank_end);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+/*
+ * TODO: '*_end' could be 0 if the module/region is at the end of the physical
+ * address space. This is for now not handled as it requires more rework.
+ */
+static bool __init bootmodules_overlap_check(struct bootmodules *bootmodules,
+ paddr_t region_start,
+ paddr_t region_size)
+{
+ paddr_t mod_start = INVALID_PADDR, mod_end = 0;
+ paddr_t region_end = region_start + region_size;
+ unsigned int i, mod_num = bootmodules->nr_mods;
+
+ for ( i = 0; i < mod_num; i++ )
+ {
+ mod_start = bootmodules->module[i].start;
+ mod_end = mod_start + bootmodules->module[i].size;
+
+ if ( region_end <= mod_start || region_start >= mod_end )
+ continue;
+ else
+ {
+ printk("Region: [%#"PRIpaddr", %#"PRIpaddr") overlapping with mod[%u]: [%#"PRIpaddr", %#"PRIpaddr")\n",
+ region_start, region_end, i, mod_start, mod_end);
+ return true;
+ }
+ }
+
+ return false;
+}
+
+void __init fw_unreserved_regions(paddr_t s, paddr_t e,
+ void (*cb)(paddr_t ps, paddr_t pe),
+ unsigned int first)
+{
+ if ( acpi_disabled )
+ dt_unreserved_regions(s, e, cb, first);
+ else
+ cb(s, e);
+}
+
+/*
+ * Given an input physical address range, check if this range is overlapping
+ * with the existing reserved memory regions defined in bootinfo.
+ * Return true if the input physical address range is overlapping with any
+ * existing reserved memory regions, otherwise false.
+ */
+bool __init check_reserved_regions_overlap(paddr_t region_start,
+ paddr_t region_size)
+{
+ const struct membanks *mem_banks[] = {
+ bootinfo_get_reserved_mem(),
+#ifdef CONFIG_ACPI
+ bootinfo_get_acpi(),
+#endif
+#ifdef CONFIG_STATIC_SHM
+ bootinfo_get_shmem(),
+#endif
+ };
+ unsigned int i;
+
+ /*
+ * Check if input region is overlapping with reserved memory banks or
+ * ACPI EfiACPIReclaimMemory (when ACPI feature is enabled) or static
+ * shared memory banks (when static shared memory feature is enabled)
+ */
+ for ( i = 0; i < ARRAY_SIZE(mem_banks); i++ )
+ if ( meminfo_overlap_check(mem_banks[i], region_start, region_size) )
+ return true;
+
+ /* Check if input region is overlapping with bootmodules */
+ if ( bootmodules_overlap_check(&bootinfo.modules,
+ region_start, region_size) )
+ return true;
+
+ return false;
+}
+
+struct bootmodule __init *add_boot_module(bootmodule_kind kind,
+ paddr_t start, paddr_t size,
+ bool domU)
+{
+ struct bootmodules *mods = &bootinfo.modules;
+ struct bootmodule *mod;
+ unsigned int i;
+
+ if ( mods->nr_mods == MAX_MODULES )
+ {
+ printk("Ignoring %s boot module at %"PRIpaddr"-%"PRIpaddr" (too many)\n",
+ boot_module_kind_as_string(kind), start, start + size);
+ return NULL;
+ }
+
+ if ( check_reserved_regions_overlap(start, size) )
+ return NULL;
+
+ for ( i = 0 ; i < mods->nr_mods ; i++ )
+ {
+ mod = &mods->module[i];
+ if ( mod->kind == kind && mod->start == start )
+ {
+ if ( !domU )
+ mod->domU = false;
+ return mod;
+ }
+ }
+
+ mod = &mods->module[mods->nr_mods++];
+ mod->kind = kind;
+ mod->start = start;
+ mod->size = size;
+ mod->domU = domU;
+
+ return mod;
+}
+
+/*
+ * boot_module_find_by_kind can only be used to return Xen modules (e.g
+ * XSM, DTB) or Dom0 modules. This is not suitable for looking up guest
+ * modules.
+ */
+struct bootmodule * __init boot_module_find_by_kind(bootmodule_kind kind)
+{
+ struct bootmodules *mods = &bootinfo.modules;
+ struct bootmodule *mod;
+ int i;
+ for (i = 0 ; i < mods->nr_mods ; i++ )
+ {
+ mod = &mods->module[i];
+ if ( mod->kind == kind && !mod->domU )
+ return mod;
+ }
+ return NULL;
+}
+
+void __init add_boot_cmdline(const char *name, const char *cmdline,
+ bootmodule_kind kind, paddr_t start, bool domU)
+{
+ struct bootcmdlines *cmds = &bootinfo.cmdlines;
+ struct bootcmdline *cmd;
+
+ if ( cmds->nr_mods == MAX_MODULES )
+ {
+ printk("Ignoring %s cmdline (too many)\n", name);
+ return;
+ }
+
+ cmd = &cmds->cmdline[cmds->nr_mods++];
+ cmd->kind = kind;
+ cmd->domU = domU;
+ cmd->start = start;
+
+ ASSERT(strlen(name) <= DT_MAX_NAME);
+ safe_strcpy(cmd->dt_name, name);
+
+ if ( strlen(cmdline) > BOOTMOD_MAX_CMDLINE )
+ panic("module %s command line too long\n", name);
+ safe_strcpy(cmd->cmdline, cmdline);
+}
+
+/*
+ * boot_cmdline_find_by_kind can only be used to return Xen modules (e.g
+ * XSM, DTB) or Dom0 modules. This is not suitable for looking up guest
+ * modules.
+ */
+struct bootcmdline * __init boot_cmdline_find_by_kind(bootmodule_kind kind)
+{
+ struct bootcmdlines *cmds = &bootinfo.cmdlines;
+ struct bootcmdline *cmd;
+ int i;
+
+ for ( i = 0 ; i < cmds->nr_mods ; i++ )
+ {
+ cmd = &cmds->cmdline[i];
+ if ( cmd->kind == kind && !cmd->domU )
+ return cmd;
+ }
+ return NULL;
+}
+
+struct bootcmdline * __init boot_cmdline_find_by_name(const char *name)
+{
+ struct bootcmdlines *mods = &bootinfo.cmdlines;
+ struct bootcmdline *mod;
+ unsigned int i;
+
+ for (i = 0 ; i < mods->nr_mods ; i++ )
+ {
+ mod = &mods->cmdline[i];
+ if ( strcmp(mod->dt_name, name) == 0 )
+ return mod;
+ }
+ return NULL;
+}
+
+struct bootmodule * __init boot_module_find_by_addr_and_kind(bootmodule_kind kind,
+ paddr_t start)
+{
+ struct bootmodules *mods = &bootinfo.modules;
+ struct bootmodule *mod;
+ unsigned int i;
+
+ for (i = 0 ; i < mods->nr_mods ; i++ )
+ {
+ mod = &mods->module[i];
+ if ( mod->kind == kind && mod->start == start )
+ return mod;
+ }
+ return NULL;
+}
+
+/*
+ * Return the end of the non-module region starting at s. In other
+ * words return s the start of the next modules after s.
+ *
+ * On input *end is the end of the region which should be considered
+ * and it is updated to reflect the end of the module, clipped to the
+ * end of the region if it would run over.
+ */
+static paddr_t __init next_module(paddr_t s, paddr_t *end)
+{
+ struct bootmodules *mi = &bootinfo.modules;
+ paddr_t lowest = ~(paddr_t)0;
+ int i;
+
+ for ( i = 0; i < mi->nr_mods; i++ )
+ {
+ paddr_t mod_s = mi->module[i].start;
+ paddr_t mod_e = mod_s + mi->module[i].size;
+
+ if ( !mi->module[i].size )
+ continue;
+
+ if ( mod_s < s )
+ continue;
+ if ( mod_s > lowest )
+ continue;
+ if ( mod_s > *end )
+ continue;
+ lowest = mod_s;
+ *end = min(*end, mod_e);
+ }
+ return lowest;
+}
+
+/*
+ * Populate the boot allocator.
+ * If a static heap was not provided by the admin, all the RAM but the
+ * following regions will be added:
+ * - Modules (e.g., Xen, Kernel)
+ * - Reserved regions
+ * - Xenheap (CONFIG_SEPARATE_XENHEAP only)
+ * If a static heap was provided by the admin, populate the boot
+ * allocator with the corresponding regions only, but with Xenheap excluded
+ * on CONFIG_SEPARATE_XENHEAP.
+ */
+void __init populate_boot_allocator(void)
+{
+ unsigned int i;
+ const struct membanks *banks = bootinfo_get_mem();
+ const struct membanks *reserved_mem = bootinfo_get_reserved_mem();
+ paddr_t s, e;
+
+ if ( bootinfo.static_heap )
+ {
+ for ( i = 0 ; i < reserved_mem->nr_banks; i++ )
+ {
+ if ( reserved_mem->bank[i].type != MEMBANK_STATIC_HEAP )
+ continue;
+
+ s = reserved_mem->bank[i].start;
+ e = s + reserved_mem->bank[i].size;
+#ifdef CONFIG_SEPARATE_XENHEAP
+ /* Avoid the xenheap, note that the xenheap cannot across a bank */
+ if ( s <= mfn_to_maddr(directmap_mfn_start) &&
+ e >= mfn_to_maddr(directmap_mfn_end) )
+ {
+ init_boot_pages(s, mfn_to_maddr(directmap_mfn_start));
+ init_boot_pages(mfn_to_maddr(directmap_mfn_end), e);
+ }
+ else
+#endif
+ init_boot_pages(s, e);
+ }
+
+ return;
+ }
+
+ for ( i = 0; i < banks->nr_banks; i++ )
+ {
+ const struct membank *bank = &banks->bank[i];
+ paddr_t bank_end = bank->start + bank->size;
+
+ s = bank->start;
+ while ( s < bank_end )
+ {
+ paddr_t n = bank_end;
+
+ e = next_module(s, &n);
+
+ if ( e == ~(paddr_t)0 )
+ e = n = bank_end;
+
+ /*
+ * Module in a RAM bank other than the one which we are
+ * not dealing with here.
+ */
+ if ( e > bank_end )
+ e = bank_end;
+
+#ifdef CONFIG_SEPARATE_XENHEAP
+ /* Avoid the xenheap */
+ if ( s < mfn_to_maddr(directmap_mfn_end) &&
+ mfn_to_maddr(directmap_mfn_start) < e )
+ {
+ e = mfn_to_maddr(directmap_mfn_start);
+ n = mfn_to_maddr(directmap_mfn_end);
+ }
+#endif
+
+ fw_unreserved_regions(s, e, init_boot_pages, 0);
+ s = n;
+ }
+ }
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
new file mode 100644
@@ -0,0 +1,2253 @@
+/*
+ * Device Tree
+ *
+ * Copyright (C) 2012 Citrix Systems, Inc.
+ * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
+ * benh@kernel.crashing.org
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <xen/types.h>
+#include <xen/init.h>
+#include <xen/guest_access.h>
+#include <xen/device_tree.h>
+#include <xen/kernel.h>
+#include <xen/lib.h>
+#include <xen/libfdt/libfdt.h>
+#include <xen/mm.h>
+#include <xen/stdarg.h>
+#include <xen/string.h>
+#include <xen/cpumask.h>
+#include <xen/ctype.h>
+#include <asm/setup.h>
+#include <xen/err.h>
+
+const void *device_tree_flattened;
+dt_irq_xlate_func dt_irq_xlate;
+/* Host device tree */
+struct dt_device_node *dt_host;
+/* Interrupt controller node*/
+const struct dt_device_node *dt_interrupt_controller;
+DEFINE_RWLOCK(dt_host_lock);
+
+/**
+ * struct dt_alias_prop - Alias property in 'aliases' node
+ * @link: List node to link the structure in aliases_lookup list
+ * @alias: Alias property name
+ * @np: Pointer to device_node that the alias stands for
+ * @id: Index value from end of alias name
+ * @stem: Alias string without the index
+ *
+ * The structure represents one alias property of 'aliases' node as
+ * an entry in aliases_lookup list.
+ */
+struct dt_alias_prop {
+ struct list_head link;
+ const char *alias;
+ struct dt_device_node *np;
+ int id;
+ char stem[0];
+};
+
+static LIST_HEAD(aliases_lookup);
+
+#ifdef CONFIG_DEVICE_TREE_DEBUG
+static void dt_dump_addr(const char *s, const __be32 *addr, int na)
+{
+ dt_dprintk("%s", s);
+ while ( na-- )
+ dt_dprintk(" %08x", be32_to_cpu(*(addr++)));
+ dt_dprintk("\n");
+}
+#else
+static void dt_dump_addr(const char *s, const __be32 *addr, int na) { }
+#endif
+
+#define DT_BAD_ADDR ((u64)-1)
+
+/* Max address size we deal with */
+#define DT_MAX_ADDR_CELLS 4
+#define DT_CHECK_ADDR_COUNT(na) ((na) > 0 && (na) <= DT_MAX_ADDR_CELLS)
+#define DT_CHECK_COUNTS(na, ns) (DT_CHECK_ADDR_COUNT(na) && (ns) > 0)
+
+/* Callbacks for bus specific translators */
+struct dt_bus
+{
+ const char *name;
+ const char *addresses;
+ bool (*match)(const struct dt_device_node *node);
+ void (*count_cells)(const struct dt_device_node *child,
+ int *addrc, int *sizec);
+ u64 (*map)(__be32 *addr, const __be32 *range, int na, int ns, int pna);
+ int (*translate)(__be32 *addr, u64 offset, int na);
+ unsigned int (*get_flags)(const __be32 *addr);
+};
+
+void dt_get_range(const __be32 **cellp, const struct dt_device_node *np,
+ u64 *address, u64 *size)
+{
+ *address = dt_next_cell(dt_n_addr_cells(np), cellp);
+ *size = dt_next_cell(dt_n_size_cells(np), cellp);
+}
+
+void dt_set_cell(__be32 **cellp, int size, u64 val)
+{
+ int cells = size;
+
+ while ( size-- )
+ {
+ (*cellp)[size] = cpu_to_fdt32(val);
+ val >>= 32;
+ }
+
+ (*cellp) += cells;
+}
+
+void dt_set_range(__be32 **cellp, const struct dt_device_node *np,
+ u64 address, u64 size)
+{
+ dt_set_cell(cellp, dt_n_addr_cells(np), address);
+ dt_set_cell(cellp, dt_n_size_cells(np), size);
+}
+
+void dt_child_set_range(__be32 **cellp, int addrcells, int sizecells,
+ u64 address, u64 size)
+{
+ dt_set_cell(cellp, addrcells, address);
+ dt_set_cell(cellp, sizecells, size);
+}
+
+static void __init *unflatten_dt_alloc(unsigned long *mem, unsigned long size,
+ unsigned long align)
+{
+ void *res;
+
+ *mem = ROUNDUP(*mem, align);
+ res = (void *)*mem;
+ *mem += size;
+
+ return res;
+}
+
+/* Find a property with a given name for a given node and return it. */
+const struct dt_property *dt_find_property(const struct dt_device_node *np,
+ const char *name, u32 *lenp)
+{
+ const struct dt_property *pp;
+
+ if ( !np )
+ return NULL;
+
+ for ( pp = np->properties; pp; pp = pp->next )
+ {
+ if ( dt_prop_cmp(pp->name, name) == 0 )
+ {
+ if ( lenp )
+ *lenp = pp->length;
+ break;
+ }
+ }
+
+ return pp;
+}
+
+const void *dt_get_property(const struct dt_device_node *np,
+ const char *name, u32 *lenp)
+{
+ const struct dt_property *pp = dt_find_property(np, name, lenp);
+
+ return pp ? pp->value : NULL;
+}
+
+bool dt_property_read_u32(const struct dt_device_node *np,
+ const char *name, u32 *out_value)
+{
+ u32 len;
+ const __be32 *val;
+
+ val = dt_get_property(np, name, &len);
+ if ( !val || len < sizeof(*out_value) )
+ return 0;
+
+ *out_value = be32_to_cpup(val);
+
+ return 1;
+}
+
+
+bool dt_property_read_u64(const struct dt_device_node *np,
+ const char *name, u64 *out_value)
+{
+ u32 len;
+ const __be32 *val;
+
+ val = dt_get_property(np, name, &len);
+ if ( !val || len < sizeof(*out_value) )
+ return 0;
+
+ *out_value = dt_read_number(val, 2);
+
+ return 1;
+}
+int dt_property_read_string(const struct dt_device_node *np,
+ const char *propname, const char **out_string)
+{
+ const struct dt_property *pp = dt_find_property(np, propname, NULL);
+
+ if ( !pp )
+ return -EINVAL;
+ if ( !pp->length )
+ return -ENODATA;
+ if ( strnlen(pp->value, pp->length) >= pp->length )
+ return -EILSEQ;
+
+ *out_string = pp->value;
+
+ return 0;
+}
+
+/**
+ * dt_find_property_value_of_size
+ *
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @min: minimum allowed length of property value
+ * @max: maximum allowed length of property value (0 means unlimited)
+ * @len: if !=NULL, actual length is written to here
+ *
+ * Search for a property in a device node and valid the requested size.
+ *
+ * Return: The property value on success, -EINVAL if the property does not
+ * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
+ * property data is too small or too large.
+ */
+static void *dt_find_property_value_of_size(const struct dt_device_node *np,
+ const char *propname, u32 min,
+ u32 max, size_t *len)
+{
+ const struct dt_property *prop = dt_find_property(np, propname, NULL);
+
+ if ( !prop )
+ return ERR_PTR(-EINVAL);
+ if ( !prop->value )
+ return ERR_PTR(-ENODATA);
+ if ( prop->length < min )
+ return ERR_PTR(-EOVERFLOW);
+ if ( max && prop->length > max )
+ return ERR_PTR(-EOVERFLOW);
+
+ if ( len )
+ *len = prop->length;
+
+ return prop->value;
+}
+
+int dt_property_read_variable_u32_array(const struct dt_device_node *np,
+ const char *propname, u32 *out_values,
+ size_t sz_min, size_t sz_max)
+{
+ size_t sz, count;
+ const __be32 *val = dt_find_property_value_of_size(np, propname,
+ (sz_min * sizeof(*out_values)),
+ (sz_max * sizeof(*out_values)),
+ &sz);
+
+ if ( IS_ERR(val) )
+ return PTR_ERR(val);
+
+ if ( !sz_max )
+ sz = sz_min;
+ else
+ sz /= sizeof(*out_values);
+
+ count = sz;
+ while ( count-- )
+ *out_values++ = be32_to_cpup(val++);
+
+ return sz;
+}
+
+int dt_property_match_string(const struct dt_device_node *np,
+ const char *propname, const char *string)
+{
+ const struct dt_property *dtprop = dt_find_property(np, propname, NULL);
+ size_t l;
+ int i;
+ const char *p, *end;
+
+ if ( !dtprop )
+ return -EINVAL;
+ if ( !dtprop->value )
+ return -ENODATA;
+
+ p = dtprop->value;
+ end = p + dtprop->length;
+
+ for ( i = 0; p < end; i++, p += l )
+ {
+ l = strnlen(p, end - p) + 1;
+ if ( p + l > end )
+ return -EILSEQ;
+ if ( strcmp(string, p) == 0 )
+ return i; /* Found it; return index */
+ }
+ return -ENODATA;
+}
+
+bool dt_device_is_compatible(const struct dt_device_node *device,
+ const char *compat)
+{
+ const char* cp;
+ u32 cplen, l;
+
+ cp = dt_get_property(device, "compatible", &cplen);
+ if ( cp == NULL )
+ return 0;
+ while ( cplen > 0 )
+ {
+ if ( dt_compat_cmp(cp, compat) == 0 )
+ return 1;
+ l = strlen(cp) + 1;
+ cp += l;
+ cplen -= l;
+ }
+
+ return 0;
+}
+
+bool dt_machine_is_compatible(const char *compat)
+{
+ const struct dt_device_node *root;
+ bool rc = false;
+
+ root = dt_find_node_by_path("/");
+ if ( root )
+ {
+ rc = dt_device_is_compatible(root, compat);
+ }
+ return rc;
+}
+
+struct dt_device_node *dt_find_node_by_name(struct dt_device_node *from,
+ const char *name)
+{
+ struct dt_device_node *np;
+ struct dt_device_node *dt;
+
+ dt = from ? from->allnext : dt_host;
+ dt_for_each_device_node(dt, np)
+ if ( np->name && (dt_node_cmp(np->name, name) == 0) )
+ break;
+
+ return np;
+}
+
+struct dt_device_node *dt_find_node_by_type(struct dt_device_node *from,
+ const char *type)
+{
+ struct dt_device_node *np;
+ struct dt_device_node *dt;
+
+ dt = from ? from->allnext : dt_host;
+ dt_for_each_device_node(dt, np)
+ if ( np->type && (dt_node_cmp(np->type, type) == 0) )
+ break;
+
+ return np;
+}
+
+struct dt_device_node *dt_find_node_by_path_from(struct dt_device_node *from,
+ const char *path)
+{
+ struct dt_device_node *np;
+
+ dt_for_each_device_node(from, np)
+ if ( np->full_name && (dt_node_cmp(np->full_name, path) == 0) )
+ break;
+
+ return np;
+}
+
+int dt_find_node_by_gpath(XEN_GUEST_HANDLE(char) u_path, uint32_t u_plen,
+ struct dt_device_node **node)
+{
+ char *path;
+
+ path = safe_copy_string_from_guest(u_path, u_plen, PAGE_SIZE);
+ if ( IS_ERR(path) )
+ return PTR_ERR(path);
+
+ *node = dt_find_node_by_path(path);
+
+ xfree(path);
+
+ return (*node == NULL) ? -ESRCH : 0;
+}
+
+struct dt_device_node *dt_find_node_by_alias(const char *alias)
+{
+ const struct dt_alias_prop *app;
+
+ list_for_each_entry( app, &aliases_lookup, link )
+ {
+ if ( !strcmp(app->alias, alias) )
+ return app->np;
+ }
+
+ return NULL;
+}
+
+const struct dt_device_match *
+dt_match_node(const struct dt_device_match *matches,
+ const struct dt_device_node *node)
+{
+ if ( !matches )
+ return NULL;
+
+ while ( matches->path || matches->type ||
+ matches->compatible || matches->not_available || matches->prop )
+ {
+ bool match = true;
+
+ if ( matches->path )
+ match &= dt_node_path_is_equal(node, matches->path);
+
+ if ( matches->type )
+ match &= dt_device_type_is_equal(node, matches->type);
+
+ if ( matches->compatible )
+ match &= dt_device_is_compatible(node, matches->compatible);
+
+ if ( matches->not_available )
+ match &= !dt_device_is_available(node);
+
+ if ( matches->prop )
+ match &= dt_find_property(node, matches->prop, NULL) != NULL;
+
+ if ( match )
+ return matches;
+ matches++;
+ }
+
+ return NULL;
+}
+
+const struct dt_device_node *dt_get_parent(const struct dt_device_node *node)
+{
+ if ( !node )
+ return NULL;
+
+ return node->parent;
+}
+
+struct dt_device_node *
+dt_find_compatible_node(struct dt_device_node *from,
+ const char *type,
+ const char *compatible)
+{
+ struct dt_device_node *np;
+ struct dt_device_node *dt;
+
+ dt = from ? from->allnext : dt_host;
+ dt_for_each_device_node(dt, np)
+ {
+ if ( type
+ && !(np->type && (dt_node_cmp(np->type, type) == 0)) )
+ continue;
+ if ( dt_device_is_compatible(np, compatible) )
+ break;
+ }
+
+ return np;
+}
+
+struct dt_device_node *
+dt_find_matching_node(struct dt_device_node *from,
+ const struct dt_device_match *matches)
+{
+ struct dt_device_node *np;
+ struct dt_device_node *dt;
+
+ dt = from ? from->allnext : dt_host;
+ dt_for_each_device_node(dt, np)
+ {
+ if ( dt_match_node(matches, np) )
+ return np;
+ }
+
+ return NULL;
+}
+
+static int __dt_n_addr_cells(const struct dt_device_node *np, bool parent)
+{
+ const __be32 *ip;
+
+ do {
+ if ( np->parent && !parent )
+ np = np->parent;
+ parent = false;
+
+ ip = dt_get_property(np, "#address-cells", NULL);
+ if ( ip )
+ return be32_to_cpup(ip);
+ } while ( np->parent );
+ /* No #address-cells property for the root node */
+ return DT_ROOT_NODE_ADDR_CELLS_DEFAULT;
+}
+
+static int __dt_n_size_cells(const struct dt_device_node *np, bool parent)
+{
+ const __be32 *ip;
+
+ do {
+ if ( np->parent && !parent )
+ np = np->parent;
+ parent = false;
+
+ ip = dt_get_property(np, "#size-cells", NULL);
+ if ( ip )
+ return be32_to_cpup(ip);
+ } while ( np->parent );
+ /* No #address-cells property for the root node */
+ return DT_ROOT_NODE_SIZE_CELLS_DEFAULT;
+}
+
+int dt_n_addr_cells(const struct dt_device_node *np)
+{
+ return __dt_n_addr_cells(np, false);
+}
+
+int dt_n_size_cells(const struct dt_device_node *np)
+{
+ return __dt_n_size_cells(np, false);
+}
+
+int dt_child_n_addr_cells(const struct dt_device_node *parent)
+{
+ return __dt_n_addr_cells(parent, true);
+}
+
+int dt_child_n_size_cells(const struct dt_device_node *parent)
+{
+ return __dt_n_size_cells(parent, true);
+}
+
+/*
+ * These are defined in Linux where much of this code comes from, but
+ * are currently unused outside this file in the context of Xen.
+ */
+#define IORESOURCE_BITS 0x000000ff /* Bus-specific bits */
+
+#define IORESOURCE_TYPE_BITS 0x00001f00 /* Resource type */
+#define IORESOURCE_IO 0x00000100 /* PCI/ISA I/O ports */
+#define IORESOURCE_MEM 0x00000200
+#define IORESOURCE_REG 0x00000300 /* Register offsets */
+#define IORESOURCE_IRQ 0x00000400
+#define IORESOURCE_DMA 0x00000800
+#define IORESOURCE_BUS 0x00001000
+
+#define IORESOURCE_PREFETCH 0x00002000 /* No side effects */
+#define IORESOURCE_READONLY 0x00004000
+#define IORESOURCE_CACHEABLE 0x00008000
+#define IORESOURCE_RANGELENGTH 0x00010000
+#define IORESOURCE_SHADOWABLE 0x00020000
+
+/*
+ * Default translator (generic bus)
+ */
+static bool dt_bus_default_match(const struct dt_device_node *node)
+{
+ /* Root node doesn't have "ranges" property */
+ if ( node->parent == NULL )
+ return 1;
+
+ /* The default bus is only used when the "ranges" property exists.
+ * Otherwise we can't translate the address
+ */
+ return (dt_get_property(node, "ranges", NULL) != NULL);
+}
+
+static void dt_bus_default_count_cells(const struct dt_device_node *dev,
+ int *addrc, int *sizec)
+{
+ if ( addrc )
+ *addrc = dt_n_addr_cells(dev);
+ if ( sizec )
+ *sizec = dt_n_size_cells(dev);
+}
+
+static u64 dt_bus_default_map(__be32 *addr, const __be32 *range,
+ int na, int ns, int pna)
+{
+ u64 cp, s, da;
+
+ cp = dt_read_number(range, na);
+ s = dt_read_number(range + na + pna, ns);
+ da = dt_read_number(addr, na);
+
+ dt_dprintk("DT: default map, cp=%llx, s=%llx, da=%llx\n",
+ (unsigned long long)cp, (unsigned long long)s,
+ (unsigned long long)da);
+
+ /*
+ * If the number of address cells is larger than 2 we assume the
+ * mapping doesn't specify a physical address. Rather, the address
+ * specifies an identifier that must match exactly.
+ */
+ if ( na > 2 && memcmp(range, addr, na * 4) != 0 )
+ return DT_BAD_ADDR;
+
+ if ( da < cp || da >= (cp + s) )
+ return DT_BAD_ADDR;
+ return da - cp;
+}
+
+static int dt_bus_default_translate(__be32 *addr, u64 offset, int na)
+{
+ u64 a = dt_read_number(addr, na);
+
+ memset(addr, 0, na * 4);
+ a += offset;
+ if ( na > 1 )
+ addr[na - 2] = cpu_to_be32(a >> 32);
+ addr[na - 1] = cpu_to_be32(a & 0xffffffffu);
+
+ return 0;
+}
+static unsigned int dt_bus_default_get_flags(const __be32 *addr)
+{
+ return IORESOURCE_MEM;
+}
+
+/*
+ * PCI bus specific translator
+ */
+
+static bool dt_node_is_pci(const struct dt_device_node *np)
+{
+ bool is_pci = !strcmp(np->name, "pcie") || !strcmp(np->name, "pci");
+
+ if ( is_pci )
+ printk(XENLOG_WARNING "%s: Missing device_type\n", np->full_name);
+
+ return is_pci;
+}
+
+static bool dt_bus_pci_match(const struct dt_device_node *np)
+{
+ /*
+ * "pciex" is PCI Express "vci" is for the /chaos bridge on 1st-gen PCI
+ * powermacs "ht" is hypertransport
+ *
+ * If none of the device_type match, and that the node name is
+ * "pcie" or "pci", accept the device as PCI (with a warning).
+ */
+ return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex") ||
+ !strcmp(np->type, "vci") || !strcmp(np->type, "ht") ||
+ dt_node_is_pci(np);
+}
+
+static void dt_bus_pci_count_cells(const struct dt_device_node *np,
+ int *addrc, int *sizec)
+{
+ if (addrc)
+ *addrc = 3;
+ if (sizec)
+ *sizec = 2;
+}
+
+static unsigned int dt_bus_pci_get_flags(const __be32 *addr)
+{
+ unsigned int flags = 0;
+ u32 w = be32_to_cpup(addr);
+
+ switch((w >> 24) & 0x03) {
+ case 0x01:
+ flags |= IORESOURCE_IO;
+ break;
+ case 0x02: /* 32 bits */
+ case 0x03: /* 64 bits */
+ flags |= IORESOURCE_MEM;
+ break;
+ }
+ if (w & 0x40000000)
+ flags |= IORESOURCE_PREFETCH;
+ return flags;
+}
+
+static u64 dt_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
+ int pna)
+{
+ u64 cp, s, da;
+ unsigned int af, rf;
+
+ af = dt_bus_pci_get_flags(addr);
+ rf = dt_bus_pci_get_flags(range);
+
+ /* Check address type match */
+ if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
+ return DT_BAD_ADDR;
+
+ /* Read address values, skipping high cell */
+ cp = dt_read_number(range + 1, na - 1);
+ s = dt_read_number(range + na + pna, ns);
+ da = dt_read_number(addr + 1, na - 1);
+
+ dt_dprintk("DT: PCI map, cp=%llx, s=%llx, da=%llx\n",
+ (unsigned long long)cp, (unsigned long long)s,
+ (unsigned long long)da);
+
+ if (da < cp || da >= (cp + s))
+ return DT_BAD_ADDR;
+ return da - cp;
+}
+
+static int dt_bus_pci_translate(__be32 *addr, u64 offset, int na)
+{
+ return dt_bus_default_translate(addr + 1, offset, na - 1);
+}
+
+/*
+ * Array of bus specific translators
+ */
+static const struct dt_bus dt_busses[] =
+{
+ /* PCI */
+ {
+ .name = "pci",
+ .addresses = "assigned-addresses",
+ .match = dt_bus_pci_match,
+ .count_cells = dt_bus_pci_count_cells,
+ .map = dt_bus_pci_map,
+ .translate = dt_bus_pci_translate,
+ .get_flags = dt_bus_pci_get_flags,
+ },
+ /* Default */
+ {
+ .name = "default",
+ .addresses = "reg",
+ .match = dt_bus_default_match,
+ .count_cells = dt_bus_default_count_cells,
+ .map = dt_bus_default_map,
+ .translate = dt_bus_default_translate,
+ .get_flags = dt_bus_default_get_flags,
+ },
+};
+
+static const struct dt_bus *dt_match_bus(const struct dt_device_node *np)
+{
+ int i;
+
+ for ( i = 0; i < ARRAY_SIZE(dt_busses); i++ )
+ if ( !dt_busses[i].match || dt_busses[i].match(np) )
+ return &dt_busses[i];
+
+ return NULL;
+}
+
+static const __be32 *dt_get_address(const struct dt_device_node *dev,
+ unsigned int index, u64 *size,
+ unsigned int *flags)
+{
+ const __be32 *prop;
+ u32 psize;
+ const struct dt_device_node *parent;
+ const struct dt_bus *bus;
+ int onesize, i, na, ns;
+
+ /* Get parent & match bus type */
+ parent = dt_get_parent(dev);
+ if ( parent == NULL )
+ return NULL;
+
+ bus = dt_match_bus(parent);
+ if ( !bus )
+ return NULL;
+ bus->count_cells(dev, &na, &ns);
+
+ if ( !DT_CHECK_ADDR_COUNT(na) )
+ return NULL;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = dt_get_property(dev, bus->addresses, &psize);
+ if ( prop == NULL )
+ return NULL;
+ psize /= 4;
+
+ onesize = na + ns;
+ for ( i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++ )
+ {
+ if ( i == index )
+ {
+ if ( size )
+ *size = dt_read_number(prop + na, ns);
+ if ( flags )
+ *flags = bus->get_flags(prop);
+ return prop;
+ }
+ }
+ return NULL;
+}
+
+static int dt_translate_one(const struct dt_device_node *parent,
+ const struct dt_bus *bus,
+ const struct dt_bus *pbus,
+ __be32 *addr, int na, int ns,
+ int pna, const char *rprop)
+{
+ const __be32 *ranges;
+ unsigned int rlen;
+ int rone;
+ u64 offset = DT_BAD_ADDR;
+
+ ranges = dt_get_property(parent, rprop, &rlen);
+ if ( ranges == NULL )
+ {
+ printk(XENLOG_ERR "DT: no ranges; cannot translate\n");
+ return 1;
+ }
+ if ( rlen == 0 )
+ {
+ offset = dt_read_number(addr, na);
+ memset(addr, 0, pna * 4);
+ dt_dprintk("DT: empty ranges; 1:1 translation\n");
+ goto finish;
+ }
+
+ dt_dprintk("DT: walking ranges...\n");
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+ for ( ; rlen >= rone; rlen -= rone, ranges += rone )
+ {
+ offset = bus->map(addr, ranges, na, ns, pna);
+ if ( offset != DT_BAD_ADDR )
+ break;
+ }
+ if ( offset == DT_BAD_ADDR )
+ {
+ dt_dprintk("DT: not found !\n");
+ return 1;
+ }
+ memcpy(addr, ranges + na, 4 * pna);
+
+finish:
+ dt_dump_addr("DT: parent translation for:", addr, pna);
+ dt_dprintk("DT: with offset: %llx\n", (unsigned long long)offset);
+
+ /* Translate it into parent bus space */
+ return pbus->translate(addr, offset, pna);
+}
+
+/*
+ * Translate an address from the device-tree into a CPU physical address,
+ * this walks up the tree and applies the various bus mappings on the
+ * way.
+ *
+ * Note: We consider that crossing any level with #size-cells == 0 to mean
+ * that translation is impossible (that is we are not dealing with a value
+ * that can be mapped to a cpu physical address). This is not really specified
+ * that way, but this is traditionally the way IBM at least do things
+ */
+static u64 __dt_translate_address(const struct dt_device_node *dev,
+ const __be32 *in_addr, const char *rprop)
+{
+ const struct dt_device_node *parent = NULL;
+ const struct dt_bus *bus, *pbus;
+ __be32 addr[DT_MAX_ADDR_CELLS];
+ int na, ns, pna, pns;
+ u64 result = DT_BAD_ADDR;
+
+ dt_dprintk("DT: ** translation for device %s **\n", dev->full_name);
+
+ /* Get parent & match bus type */
+ parent = dt_get_parent(dev);
+ if ( parent == NULL )
+ goto bail;
+ bus = dt_match_bus(parent);
+ if ( !bus )
+ goto bail;
+
+ /* Count address cells & copy address locally */
+ bus->count_cells(dev, &na, &ns);
+ if ( !DT_CHECK_COUNTS(na, ns) )
+ {
+ printk(XENLOG_ERR "dt_parse: Bad cell count for device %s\n",
+ dev->full_name);
+ goto bail;
+ }
+ memcpy(addr, in_addr, na * 4);
+
+ dt_dprintk("DT: bus is %s (na=%d, ns=%d) on %s\n",
+ bus->name, na, ns, parent->full_name);
+ dt_dump_addr("DT: translating address:", addr, na);
+
+ /* Translate */
+ for ( ;; )
+ {
+ /* Switch to parent bus */
+ dev = parent;
+ parent = dt_get_parent(dev);
+
+ /* If root, we have finished */
+ if ( parent == NULL )
+ {
+ dt_dprintk("DT: reached root node\n");
+ result = dt_read_number(addr, na);
+ break;
+ }
+
+ /* Get new parent bus and counts */
+ pbus = dt_match_bus(parent);
+ if ( pbus == NULL )
+ {
+ printk("DT: %s is not a valid bus\n", parent->full_name);
+ break;
+ }
+ pbus->count_cells(dev, &pna, &pns);
+ if ( !DT_CHECK_COUNTS(pna, pns) )
+ {
+ printk(XENLOG_ERR "dt_parse: Bad cell count for parent %s\n",
+ dev->full_name);
+ break;
+ }
+
+ dt_dprintk("DT: parent bus is %s (na=%d, ns=%d) on %s\n",
+ pbus->name, pna, pns, parent->full_name);
+
+ /* Apply bus translation */
+ if ( dt_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop) )
+ break;
+
+ /* Complete the move up one level */
+ na = pna;
+ ns = pns;
+ bus = pbus;
+
+ dt_dump_addr("DT: one level translation:", addr, na);
+ }
+
+bail:
+ return result;
+}
+
+/* dt_device_address - Translate device tree address and return it */
+int dt_device_get_address(const struct dt_device_node *dev, unsigned int index,
+ u64 *addr, u64 *size)
+{
+ const __be32 *addrp;
+ unsigned int flags;
+
+ addrp = dt_get_address(dev, index, size, &flags);
+ if ( addrp == NULL )
+ return -EINVAL;
+
+ if ( !addr )
+ return -EINVAL;
+
+ *addr = __dt_translate_address(dev, addrp, "ranges");
+
+ if ( *addr == DT_BAD_ADDR )
+ return -EINVAL;
+
+ return 0;
+}
+
+int dt_device_get_paddr(const struct dt_device_node *dev, unsigned int index,
+ paddr_t *addr, paddr_t *size)
+{
+ uint64_t dt_addr, dt_size;
+ int ret;
+
+ ret = dt_device_get_address(dev, index, &dt_addr, &dt_size);
+ if ( ret )
+ return ret;
+
+ if ( !addr )
+ return -EINVAL;
+
+ if ( dt_addr != (paddr_t)dt_addr )
+ {
+ printk("Error: Physical address 0x%"PRIx64" for node=%s is greater than max width (%zu bytes) supported\n",
+ dt_addr, dev->name, sizeof(paddr_t));
+ return -ERANGE;
+ }
+
+ *addr = dt_addr;
+
+ if ( size )
+ {
+ if ( dt_size != (paddr_t)dt_size )
+ {
+ printk("Error: Physical size 0x%"PRIx64" for node=%s is greater than max width (%zu bytes) supported\n",
+ dt_size, dev->name, sizeof(paddr_t));
+ return -ERANGE;
+ }
+
+ *size = dt_size;
+ }
+
+ return ret;
+}
+
+int dt_for_each_range(const struct dt_device_node *dev,
+ int (*cb)(const struct dt_device_node *dev,
+ uint64_t addr, uint64_t length,
+ void *data),
+ void *data)
+{
+ const struct dt_device_node *parent = NULL;
+ const struct dt_bus *bus, *pbus;
+ const __be32 *ranges;
+ __be32 addr[DT_MAX_ADDR_CELLS];
+ unsigned int rlen;
+ int na, ns, pna, pns, rone;
+
+ bus = dt_match_bus(dev);
+ if ( !bus )
+ return 0; /* device is not a bus */
+
+ parent = dt_get_parent(dev);
+ if ( parent == NULL )
+ return -EINVAL;
+
+ ranges = dt_get_property(dev, "ranges", &rlen);
+ if ( ranges == NULL )
+ {
+ printk(XENLOG_ERR "DT: no ranges; cannot enumerate %s\n",
+ dev->full_name);
+ return -EINVAL;
+ }
+ if ( rlen == 0 ) /* Nothing to do */
+ return 0;
+
+ bus->count_cells(dev, &na, &ns);
+ if ( !DT_CHECK_COUNTS(na, ns) )
+ {
+ printk(XENLOG_ERR "dt_parse: Bad cell count for device %s\n",
+ dev->full_name);
+ return -EINVAL;
+ }
+
+ pbus = dt_match_bus(parent);
+ if ( pbus == NULL )
+ {
+ printk("DT: %s is not a valid bus\n", parent->full_name);
+ return -EINVAL;
+ }
+
+ pbus->count_cells(dev, &pna, &pns);
+ if ( !DT_CHECK_COUNTS(pna, pns) )
+ {
+ printk(XENLOG_ERR "dt_parse: Bad cell count for parent %s\n",
+ dev->full_name);
+ return -EINVAL;
+ }
+
+ /* Now walk through the ranges */
+ rlen /= 4;
+ rone = na + pna + ns;
+
+ dt_dprintk("%s: dev=%s, bus=%s, parent=%s, rlen=%d, rone=%d\n",
+ __func__,
+ dt_node_name(dev), bus->name,
+ dt_node_name(parent), rlen, rone);
+
+ for ( ; rlen >= rone; rlen -= rone, ranges += rone )
+ {
+ uint64_t a, s;
+ int ret;
+
+ memcpy(addr, ranges + na, 4 * pna);
+
+ a = __dt_translate_address(dev, addr, "ranges");
+ s = dt_read_number(ranges + na + pna, ns);
+
+ ret = cb(dev, a, s, data);
+ if ( ret )
+ {
+ dt_dprintk(" -> callback failed=%d\n", ret);
+ return ret;
+ }
+
+ }
+
+ return 0;
+}
+
+/**
+ * dt_find_node_by_phandle - Find a node given a phandle
+ * @handle: phandle of the node to find
+ *
+ * Returns a node pointer.
+ */
+struct dt_device_node *dt_find_node_by_phandle(dt_phandle handle)
+{
+ struct dt_device_node *np;
+
+ dt_for_each_device_node(dt_host, np)
+ if ( np->phandle == handle )
+ break;
+
+ return np;
+}
+
+/**
+ * dt_irq_find_parent - Given a device node, find its interrupt parent node
+ * @child: pointer to device node
+ *
+ * Returns a pointer to the interrupt parent node, or NULL if the interrupt
+ * parent could not be determined.
+ */
+static const struct dt_device_node *
+dt_irq_find_parent(const struct dt_device_node *child)
+{
+ const struct dt_device_node *p;
+ const __be32 *parp;
+
+ do
+ {
+ parp = dt_get_property(child, "interrupt-parent", NULL);
+ if ( parp == NULL )
+ p = dt_get_parent(child);
+ else
+ p = dt_find_node_by_phandle(be32_to_cpup(parp));
+ child = p;
+ } while ( p && dt_get_property(p, "#interrupt-cells", NULL) == NULL );
+
+ return p;
+}
+
+unsigned int dt_number_of_irq(const struct dt_device_node *device)
+{
+ const struct dt_device_node *p;
+ const __be32 *intspec, *tmp;
+ u32 intsize, intlen;
+ int intnum;
+
+ dt_dprintk("dt_irq_number: dev=%s\n", device->full_name);
+
+ /* Try the new-style interrupts-extended first */
+ intnum = dt_count_phandle_with_args(device, "interrupts-extended",
+ "#interrupt-cells");
+ if ( intnum >= 0 )
+ {
+ dt_dprintk(" using 'interrupts-extended' property\n");
+ dt_dprintk(" intnum=%d\n", intnum);
+ return intnum;
+ }
+
+ /* Get the interrupts property */
+ intspec = dt_get_property(device, "interrupts", &intlen);
+ if ( intspec == NULL )
+ return 0;
+ intlen /= sizeof(*intspec);
+
+ dt_dprintk(" using 'interrupts' property\n");
+ dt_dprintk(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
+
+ /* Look for the interrupt parent. */
+ p = dt_irq_find_parent(device);
+ if ( p == NULL )
+ return 0;
+
+ /* Get size of interrupt specifier */
+ tmp = dt_get_property(p, "#interrupt-cells", NULL);
+ if ( tmp == NULL )
+ return 0;
+ intsize = be32_to_cpu(*tmp);
+
+ dt_dprintk(" intsize=%d intlen=%d\n", intsize, intlen);
+
+ return (intlen / intsize);
+}
+
+unsigned int dt_number_of_address(const struct dt_device_node *dev)
+{
+ const __be32 *prop;
+ u32 psize;
+ const struct dt_device_node *parent;
+ const struct dt_bus *bus;
+ int onesize, na, ns;
+
+ /* Get parent & match bus type */
+ parent = dt_get_parent(dev);
+ if ( parent == NULL )
+ return 0;
+
+ bus = dt_match_bus(parent);
+ if ( !bus )
+ return 0;
+ bus->count_cells(dev, &na, &ns);
+
+ if ( !DT_CHECK_COUNTS(na, ns) )
+ return 0;
+
+ /* Get "reg" or "assigned-addresses" property */
+ prop = dt_get_property(dev, bus->addresses, &psize);
+ if ( prop == NULL )
+ return 0;
+
+ psize /= 4;
+ onesize = na + ns;
+
+ return (psize / onesize);
+}
+
+int dt_for_each_irq_map(const struct dt_device_node *dev,
+ int (*cb)(const struct dt_device_node *dev,
+ const struct dt_irq *dt_irq,
+ void *data),
+ void *data)
+{
+ const struct dt_device_node *ipar, *tnode, *old = NULL;
+ const __be32 *tmp, *imap;
+ u32 intsize = 1, addrsize, pintsize = 0, paddrsize = 0;
+ u32 imaplen;
+ int i, ret;
+
+ struct dt_raw_irq dt_raw_irq;
+ struct dt_irq dt_irq;
+
+ dt_dprintk("%s: par=%s cb=%p data=%p\n", __func__,
+ dev->full_name, cb, data);
+
+ ipar = dev;
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
+ if ( tmp != NULL )
+ {
+ intsize = be32_to_cpu(*tmp);
+ break;
+ }
+ tnode = ipar;
+ ipar = dt_irq_find_parent(ipar);
+ } while ( ipar );
+ if ( ipar == NULL )
+ {
+ dt_dprintk(" -> no parent found !\n");
+ goto fail;
+ }
+
+ dt_dprintk("%s: ipar=%s, size=%d\n", __func__, ipar->full_name, intsize);
+
+ if ( intsize > DT_MAX_IRQ_SPEC )
+ {
+ dt_dprintk(" -> too many irq specifier cells\n");
+ goto fail;
+ }
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = ipar;
+ do {
+ tmp = dt_get_property(old, "#address-cells", NULL);
+ tnode = dt_get_parent(old);
+ old = tnode;
+ } while ( old && tmp == NULL );
+
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
+
+ dt_dprintk(" -> addrsize=%d\n", addrsize);
+
+ /* Now look for an interrupt-map */
+ imap = dt_get_property(dev, "interrupt-map", &imaplen);
+ /* No interrupt-map found. Ignore */
+ if ( imap == NULL )
+ {
+ dt_dprintk(" -> no map, ignoring\n");
+ return 0;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Parse interrupt-map */
+ while ( imaplen > (addrsize + intsize + 1) )
+ {
+ /* skip child unit address and child interrupt specifier */
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ /* Get the interrupt parent */
+ ipar = dt_find_node_by_phandle(be32_to_cpup(imap));
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if ( ipar == NULL )
+ {
+ dt_dprintk(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ dt_dprintk(" -> ipar %s\n", dt_node_name(ipar));
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
+ if ( tmp == NULL )
+ {
+ dt_dprintk(" -> parent lacks #interrupt-cells!\n");
+ goto fail;
+ }
+ pintsize = be32_to_cpu(*tmp);
+ tmp = dt_get_property(ipar, "#address-cells", NULL);
+ paddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
+
+ dt_dprintk(" -> pintsize=%d, paddrsize=%d\n",
+ pintsize, paddrsize);
+
+ if ( pintsize > DT_MAX_IRQ_SPEC )
+ {
+ dt_dprintk(" -> too many irq specifier cells in parent\n");
+ goto fail;
+ }
+
+ /* Check for malformed properties */
+ if ( imaplen < (paddrsize + pintsize) )
+ goto fail;
+
+ imap += paddrsize;
+ imaplen -= paddrsize;
+
+ dt_raw_irq.controller = ipar;
+ dt_raw_irq.size = pintsize;
+ for ( i = 0; i < pintsize; i++ )
+ dt_raw_irq.specifier[i] = dt_read_number(imap + i, 1);
+
+ if ( dt_raw_irq.controller != dt_interrupt_controller )
+ {
+ /*
+ * We don't map IRQs connected to secondary IRQ controllers as
+ * these IRQs have no meaning to us until they connect to the
+ * primary controller.
+ *
+ * Secondary IRQ controllers will at some point connect to
+ * the primary controller (possibly via other IRQ controllers).
+ * We map the IRQs at that last connection point.
+ */
+ imap += pintsize;
+ imaplen -= pintsize;
+ dt_dprintk(" -> Skipped IRQ for secondary IRQ controller\n");
+ continue;
+ }
+
+ ret = dt_irq_translate(&dt_raw_irq, &dt_irq);
+ if ( ret )
+ {
+ dt_dprintk(" -> failed to translate IRQ: %d\n", ret);
+ return ret;
+ }
+
+ ret = cb(dev, &dt_irq, data);
+ if ( ret )
+ {
+ dt_dprintk(" -> callback failed=%d\n", ret);
+ return ret;
+ }
+
+ imap += pintsize;
+ imaplen -= pintsize;
+
+ dt_dprintk(" -> imaplen=%d\n", imaplen);
+ }
+
+ return 0;
+
+fail:
+ return -EINVAL;
+}
+
+/**
+ * dt_irq_map_raw - Low level interrupt tree parsing
+ * @parent: the device interrupt parent
+ * @intspec: interrupt specifier ("interrupts" property of the device)
+ * @ointsize: size of the passed in interrupt specifier
+ * @addr: address specifier (start of "reg" property of the device)
+ * @oirq: structure dt_raw_irq filled by this function
+ *
+ * Returns 0 on success and a negative number on error
+ *
+ * This function is a low-level interrupt tree walking function. It
+ * can be used to do a partial walk with synthesized reg and interrupts
+ * properties, for example when resolving PCI interrupts when no device
+ * node exist for the parent.
+ */
+static int dt_irq_map_raw(const struct dt_device_node *parent,
+ const __be32 *intspec, u32 ointsize,
+ const __be32 *addr,
+ struct dt_raw_irq *oirq)
+{
+ const struct dt_device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
+ const __be32 *tmp, *imap, *imask;
+ u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
+ u32 imaplen;
+ int match, i;
+
+ dt_dprintk("dt_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
+ parent->full_name, be32_to_cpup(intspec),
+ be32_to_cpup(intspec + 1), ointsize);
+
+ ipar = parent;
+
+ /* First get the #interrupt-cells property of the current cursor
+ * that tells us how to interpret the passed-in intspec. If there
+ * is none, we are nice and just walk up the tree
+ */
+ do {
+ tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
+ if ( tmp != NULL )
+ {
+ intsize = be32_to_cpu(*tmp);
+ break;
+ }
+ tnode = ipar;
+ ipar = dt_irq_find_parent(ipar);
+ } while ( ipar );
+ if ( ipar == NULL )
+ {
+ dt_dprintk(" -> no parent found !\n");
+ goto fail;
+ }
+
+ dt_dprintk("dt_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
+
+ if ( ointsize != intsize )
+ return -EINVAL;
+
+ /* Look for this #address-cells. We have to implement the old linux
+ * trick of looking for the parent here as some device-trees rely on it
+ */
+ old = ipar;
+ do {
+ tmp = dt_get_property(old, "#address-cells", NULL);
+ tnode = dt_get_parent(old);
+ old = tnode;
+ } while ( old && tmp == NULL );
+
+ old = NULL;
+ addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
+
+ dt_dprintk(" -> addrsize=%d\n", addrsize);
+
+ /* Now start the actual "proper" walk of the interrupt tree */
+ while ( ipar != NULL )
+ {
+ /* Now check if cursor is an interrupt-controller and if it is
+ * then we are done
+ */
+ if ( dt_get_property(ipar, "interrupt-controller", NULL) != NULL )
+ {
+ dt_dprintk(" -> got it !\n");
+ if ( intsize > DT_MAX_IRQ_SPEC )
+ {
+ dt_dprintk(" -> intsize(%u) greater than DT_MAX_IRQ_SPEC(%u)\n",
+ intsize, DT_MAX_IRQ_SPEC);
+ goto fail;
+ }
+ for ( i = 0; i < intsize; i++ )
+ oirq->specifier[i] = dt_read_number(intspec + i, 1);
+ oirq->size = intsize;
+ oirq->controller = ipar;
+ return 0;
+ }
+
+ /* Now look for an interrupt-map */
+ imap = dt_get_property(ipar, "interrupt-map", &imaplen);
+ /* No interrupt map, check for an interrupt parent */
+ if ( imap == NULL )
+ {
+ dt_dprintk(" -> no map, getting parent\n");
+ newpar = dt_irq_find_parent(ipar);
+ goto skiplevel;
+ }
+ imaplen /= sizeof(u32);
+
+ /* Look for a mask */
+ imask = dt_get_property(ipar, "interrupt-map-mask", NULL);
+
+ /* If we were passed no "reg" property and we attempt to parse
+ * an interrupt-map, then #address-cells must be 0.
+ * Fail if it's not.
+ */
+ if ( addr == NULL && addrsize != 0 )
+ {
+ dt_dprintk(" -> no reg passed in when needed !\n");
+ goto fail;
+ }
+
+ /* Parse interrupt-map */
+ match = 0;
+ while ( imaplen > (addrsize + intsize + 1) && !match )
+ {
+ /* Compare specifiers */
+ match = 1;
+ for ( i = 0; i < addrsize && match; ++i )
+ {
+ __be32 mask = imask ? imask[i] : cpu_to_be32(0xffffffffu);
+ match = ((addr[i] ^ imap[i]) & mask) == 0;
+ }
+ for ( ; i < (addrsize + intsize) && match; ++i )
+ {
+ __be32 mask = imask ? imask[i] : cpu_to_be32(0xffffffffu);
+ match = ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
+ }
+ imap += addrsize + intsize;
+ imaplen -= addrsize + intsize;
+
+ dt_dprintk(" -> match=%d (imaplen=%d)\n", match, imaplen);
+
+ /* Get the interrupt parent */
+ newpar = dt_find_node_by_phandle(be32_to_cpup(imap));
+ imap++;
+ --imaplen;
+
+ /* Check if not found */
+ if ( newpar == NULL )
+ {
+ dt_dprintk(" -> imap parent not found !\n");
+ goto fail;
+ }
+
+ /* Get #interrupt-cells and #address-cells of new
+ * parent
+ */
+ tmp = dt_get_property(newpar, "#interrupt-cells", NULL);
+ if ( tmp == NULL )
+ {
+ dt_dprintk(" -> parent lacks #interrupt-cells!\n");
+ goto fail;
+ }
+ newintsize = be32_to_cpu(*tmp);
+ tmp = dt_get_property(newpar, "#address-cells", NULL);
+ newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
+
+ dt_dprintk(" -> newintsize=%d, newaddrsize=%d\n",
+ newintsize, newaddrsize);
+
+ /* Check for malformed properties */
+ if ( imaplen < (newaddrsize + newintsize) )
+ goto fail;
+
+ imap += newaddrsize + newintsize;
+ imaplen -= newaddrsize + newintsize;
+
+ dt_dprintk(" -> imaplen=%d\n", imaplen);
+ }
+ if ( !match )
+ goto fail;
+
+ old = newpar;
+ addrsize = newaddrsize;
+ intsize = newintsize;
+ intspec = imap - intsize;
+ addr = intspec - addrsize;
+
+ skiplevel:
+ /* Iterate again with new parent */
+ dt_dprintk(" -> new parent: %s\n", dt_node_full_name(newpar));
+ ipar = newpar;
+ newpar = NULL;
+ }
+fail:
+ return -EINVAL;
+}
+
+int dt_device_get_raw_irq(const struct dt_device_node *device,
+ unsigned int index,
+ struct dt_raw_irq *out_irq)
+{
+ const struct dt_device_node *p;
+ const __be32 *intspec, *tmp, *addr;
+ u32 intsize, intlen;
+ int res = -EINVAL;
+ struct dt_phandle_args args;
+ int i;
+
+ dt_dprintk("dt_device_get_raw_irq: dev=%s, index=%u\n",
+ device->full_name, index);
+
+ /* Get the reg property (if any) */
+ addr = dt_get_property(device, "reg", NULL);
+
+ /* Try the new-style interrupts-extended first */
+ res = dt_parse_phandle_with_args(device, "interrupts-extended",
+ "#interrupt-cells", index, &args);
+ if ( !res )
+ {
+ dt_dprintk(" using 'interrupts-extended' property\n");
+ dt_dprintk(" intspec=%d intsize=%d\n", args.args[0], args.args_count);
+
+ for ( i = 0; i < args.args_count; i++ )
+ args.args[i] = cpu_to_be32(args.args[i]);
+
+ return dt_irq_map_raw(args.np, args.args, args.args_count,
+ addr, out_irq);
+ }
+
+ /* Get the interrupts property */
+ intspec = dt_get_property(device, "interrupts", &intlen);
+ if ( intspec == NULL )
+ return -EINVAL;
+ intlen /= sizeof(*intspec);
+
+ dt_dprintk(" using 'interrupts' property\n");
+ dt_dprintk(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
+
+ /* Look for the interrupt parent. */
+ p = dt_irq_find_parent(device);
+ if ( p == NULL )
+ return -EINVAL;
+
+ /* Get size of interrupt specifier */
+ tmp = dt_get_property(p, "#interrupt-cells", NULL);
+ if ( tmp == NULL )
+ goto out;
+ intsize = be32_to_cpu(*tmp);
+
+ dt_dprintk(" intsize=%d intlen=%d\n", intsize, intlen);
+
+ /* Check index */
+ if ( (index + 1) * intsize > intlen )
+ goto out;
+
+ /* Get new specifier and map it */
+ res = dt_irq_map_raw(p, intspec + index * intsize, intsize,
+ addr, out_irq);
+ if ( res )
+ goto out;
+out:
+ return res;
+}
+
+int dt_irq_translate(const struct dt_raw_irq *raw,
+ struct dt_irq *out_irq)
+{
+ ASSERT(dt_irq_xlate != NULL);
+ ASSERT(dt_interrupt_controller != NULL);
+
+ /*
+ * TODO: Retrieve the right irq_xlate. This is only works for the primary
+ * interrupt controller.
+ */
+ if ( raw->controller != dt_interrupt_controller )
+ return -EINVAL;
+
+ return dt_irq_xlate(raw->specifier, raw->size,
+ &out_irq->irq, &out_irq->type);
+}
+
+int dt_device_get_irq(const struct dt_device_node *device, unsigned int index,
+ struct dt_irq *out_irq)
+{
+ struct dt_raw_irq raw;
+ int res;
+
+ res = dt_device_get_raw_irq(device, index, &raw);
+
+ if ( res )
+ return res;
+
+ return dt_irq_translate(&raw, out_irq);
+}
+
+bool dt_device_is_available(const struct dt_device_node *device)
+{
+ const char *status;
+ u32 statlen;
+
+ status = dt_get_property(device, "status", &statlen);
+ if ( status == NULL )
+ return 1;
+
+ if ( statlen > 0 )
+ {
+ if ( !strcmp(status, "okay") || !strcmp(status, "ok") )
+ return 1;
+ }
+
+ return 0;
+}
+
+bool dt_device_for_passthrough(const struct dt_device_node *device)
+{
+ return (dt_find_property(device, "xen,passthrough", NULL) != NULL);
+
+}
+
+static int __dt_parse_phandle_with_args(const struct dt_device_node *np,
+ const char *list_name,
+ const char *cells_name,
+ int cell_count, int index,
+ struct dt_phandle_args *out_args)
+{
+ const __be32 *list, *list_end;
+ int rc = 0, cur_index = 0;
+ u32 size, count = 0;
+ struct dt_device_node *node = NULL;
+ dt_phandle phandle;
+
+ /* Retrieve the phandle list property */
+ list = dt_get_property(np, list_name, &size);
+ if ( !list )
+ return -ENOENT;
+ list_end = list + size / sizeof(*list);
+
+ /* Loop over the phandles until all the requested entry is found */
+ while ( list < list_end )
+ {
+ rc = -EINVAL;
+ count = 0;
+
+ /*
+ * If phandle is 0, then it is an empty entry with no
+ * arguments. Skip forward to the next entry.
+ * */
+ phandle = be32_to_cpup(list++);
+ if ( phandle )
+ {
+ /*
+ * Find the provider node and parse the #*-cells
+ * property to determine the argument length.
+ *
+ * This is not needed if the cell count is hard-coded
+ * (i.e. cells_name not set, but cell_count is set),
+ * except when we're going to return the found node
+ * below.
+ */
+ if ( cells_name || cur_index == index )
+ {
+ node = dt_find_node_by_phandle(phandle);
+ if ( !node )
+ {
+ printk(XENLOG_ERR "%s: could not find phandle\n",
+ np->full_name);
+ goto err;
+ }
+ }
+
+ if ( cells_name )
+ {
+ if ( !dt_property_read_u32(node, cells_name, &count) )
+ {
+ printk("%s: could not get %s for %s\n",
+ np->full_name, cells_name, node->full_name);
+ goto err;
+ }
+ }
+ else
+ count = cell_count;
+
+ /*
+ * Make sure that the arguments actually fit in the
+ * remaining property data length
+ */
+ if ( list + count > list_end )
+ {
+ printk(XENLOG_ERR "%s: arguments longer than property\n",
+ np->full_name);
+ goto err;
+ }
+ }
+
+ /*
+ * All of the error cases above bail out of the loop, so at
+ * this point, the parsing is successful. If the requested
+ * index matches, then fill the out_args structure and return,
+ * or return -ENOENT for an empty entry.
+ */
+ rc = -ENOENT;
+ if ( cur_index == index )
+ {
+ if (!phandle)
+ goto err;
+
+ if ( out_args )
+ {
+ int i;
+
+ WARN_ON(count > MAX_PHANDLE_ARGS);
+ if (count > MAX_PHANDLE_ARGS)
+ count = MAX_PHANDLE_ARGS;
+ out_args->np = node;
+ out_args->args_count = count;
+ for ( i = 0; i < count; i++ )
+ out_args->args[i] = be32_to_cpup(list++);
+ }
+
+ /* Found it! return success */
+ return 0;
+ }
+
+ node = NULL;
+ list += count;
+ cur_index++;
+ }
+
+ /*
+ * Returning result will be one of:
+ * -ENOENT : index is for empty phandle
+ * -EINVAL : parsing error on data
+ * [1..n] : Number of phandle (count mode; when index = -1)
+ */
+ rc = index < 0 ? cur_index : -ENOENT;
+err:
+ return rc;
+}
+
+struct dt_device_node *dt_parse_phandle(const struct dt_device_node *np,
+ const char *phandle_name, int index)
+{
+ struct dt_phandle_args args;
+
+ if (index < 0)
+ return NULL;
+
+ if (__dt_parse_phandle_with_args(np, phandle_name, NULL, 0,
+ index, &args))
+ return NULL;
+
+ return args.np;
+}
+
+
+int dt_parse_phandle_with_args(const struct dt_device_node *np,
+ const char *list_name,
+ const char *cells_name, int index,
+ struct dt_phandle_args *out_args)
+{
+ if ( index < 0 )
+ return -EINVAL;
+ return __dt_parse_phandle_with_args(np, list_name, cells_name, 0,
+ index, out_args);
+}
+
+int dt_count_phandle_with_args(const struct dt_device_node *np,
+ const char *list_name,
+ const char *cells_name)
+{
+ return __dt_parse_phandle_with_args(np, list_name, cells_name, 0, -1, NULL);
+}
+
+/**
+ * unflatten_dt_node - Alloc and populate a device_node from the flat tree
+ * @fdt: The parent device tree blob
+ * @mem: Memory chunk to use for allocating device nodes and properties
+ * @p: pointer to node in flat tree
+ * @dad: Parent struct device_node
+ * @allnextpp: pointer to ->allnext from last allocated device_node
+ * @fpsize: Size of the node path up at the current depth.
+ */
+static unsigned long unflatten_dt_node(const void *fdt,
+ unsigned long mem,
+ unsigned long *p,
+ struct dt_device_node *dad,
+ struct dt_device_node ***allnextpp,
+ unsigned long fpsize)
+{
+ struct dt_device_node *np;
+ struct dt_property *pp, **prev_pp = NULL;
+ char *pathp;
+ u32 tag;
+ unsigned int l, allocl;
+ int has_name = 0;
+ int new_format = 0;
+
+ tag = be32_to_cpup((__be32 *)(*p));
+ if ( tag != FDT_BEGIN_NODE )
+ {
+ printk(XENLOG_WARNING "Weird tag at start of node: %x\n", tag);
+ return mem;
+ }
+ *p += 4;
+ pathp = (char *)*p;
+ l = allocl = strlen(pathp) + 1;
+ *p = ROUNDUP(*p + l, 4);
+
+ /* version 0x10 has a more compact unit name here instead of the full
+ * path. we accumulate the full path size using "fpsize", we'll rebuild
+ * it later. We detect this because the first character of the name is
+ * not '/'.
+ */
+ if ( (*pathp) != '/' )
+ {
+ new_format = 1;
+ if ( fpsize == 0 )
+ {
+ /* root node: special case. fpsize accounts for path
+ * plus terminating zero. root node only has '/', so
+ * fpsize should be 2, but we want to avoid the first
+ * level nodes to have two '/' so we use fpsize 1 here
+ */
+ fpsize = 1;
+ allocl = 2;
+ }
+ else
+ {
+ /* account for '/' and path size minus terminal 0
+ * already in 'l'
+ */
+ fpsize += l;
+ allocl = fpsize;
+ }
+ }
+
+ np = unflatten_dt_alloc(&mem, sizeof(struct dt_device_node) + allocl,
+ __alignof__(struct dt_device_node));
+ if ( allnextpp )
+ {
+ memset(np, 0, sizeof(*np));
+ np->full_name = ((char *)np) + sizeof(struct dt_device_node);
+ /* By default dom0 owns the device */
+ np->used_by = 0;
+ /* By default the device is not protected */
+ np->is_protected = false;
+ INIT_LIST_HEAD(&np->domain_list);
+
+ if ( new_format )
+ {
+ char *fn = np->full_name;
+ /* rebuild full path for new format */
+ if ( dad && dad->parent )
+ {
+ strlcpy(fn, dad->full_name, allocl);
+#ifdef DEBUG_DT
+ if ( (strlen(fn) + l + 1) != allocl )
+ {
+ dt_dprintk("%s: p: %d, l: %d, a: %d\n",
+ pathp, (int)strlen(fn),
+ l, allocl);
+ }
+#endif
+ fn += strlen(fn);
+ }
+ *(fn++) = '/';
+ memcpy(fn, pathp, l);
+ }
+ else
+ memcpy(np->full_name, pathp, l);
+ prev_pp = &np->properties;
+ **allnextpp = np;
+ *allnextpp = &np->allnext;
+ if ( dad != NULL )
+ {
+ np->parent = dad;
+ /* we temporarily use the next field as `last_child'*/
+ if ( dad->next == NULL )
+ dad->child = np;
+ else
+ dad->next->sibling = np;
+ dad->next = np;
+ }
+ }
+ /* process properties */
+ while ( 1 )
+ {
+ u32 sz, noff;
+ const char *pname;
+
+ tag = be32_to_cpup((__be32 *)(*p));
+ if ( tag == FDT_NOP )
+ {
+ *p += 4;
+ continue;
+ }
+ if ( tag != FDT_PROP )
+ break;
+ *p += 4;
+ sz = be32_to_cpup((__be32 *)(*p));
+ noff = be32_to_cpup((__be32 *)((*p) + 4));
+ *p += 8;
+ if ( fdt_version(fdt) < 0x10 )
+ *p = ROUNDUP(*p, sz >= 8 ? 8 : 4);
+
+ pname = fdt_string(fdt, noff);
+ if ( pname == NULL )
+ {
+ dt_dprintk("Can't find property name in list!\n");
+ break;
+ }
+ if ( strcmp(pname, "name") == 0 )
+ has_name = 1;
+ l = strlen(pname) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct dt_property),
+ __alignof__(struct dt_property));
+ if ( allnextpp )
+ {
+ /* We accept flattened tree phandles either in
+ * ePAPR-style "phandle" properties, or the
+ * legacy "linux,phandle" properties. If both
+ * appear and have different values, things
+ * will get weird. Don't do that. */
+ if ( (strcmp(pname, "phandle") == 0) ||
+ (strcmp(pname, "linux,phandle") == 0) )
+ {
+ if ( np->phandle == 0 )
+ np->phandle = be32_to_cpup((__be32*)*p);
+ }
+ /* And we process the "ibm,phandle" property
+ * used in pSeries dynamic device tree
+ * stuff */
+ if ( strcmp(pname, "ibm,phandle") == 0 )
+ np->phandle = be32_to_cpup((__be32 *)*p);
+ pp->name = pname;
+ pp->length = sz;
+ pp->value = (void *)*p;
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+ }
+ *p = ROUNDUP((*p) + sz, 4);
+ }
+ /* with version 0x10 we may not have the name property, recreate
+ * it here from the unit name if absent
+ */
+ if ( !has_name )
+ {
+ char *p1 = pathp, *ps = pathp, *pa = NULL;
+ int sz;
+
+ while ( *p1 )
+ {
+ if ( (*p1) == '@' )
+ pa = p1;
+ if ( (*p1) == '/' )
+ ps = p1 + 1;
+ p1++;
+ }
+ if ( pa < ps )
+ pa = p1;
+ sz = (pa - ps) + 1;
+ pp = unflatten_dt_alloc(&mem, sizeof(struct dt_property) + sz,
+ __alignof__(struct dt_property));
+ if ( allnextpp )
+ {
+ pp->name = "name";
+ pp->length = sz;
+ pp->value = pp + 1;
+ /*
+ * The device tree creation code assume that the property
+ * "name" is not a fake.
+ * To avoid a big divergence with Linux code, only remove
+ * property link. In this case we will lose a bit of memory
+ */
+#if 0
+ *prev_pp = pp;
+ prev_pp = &pp->next;
+#endif
+ np->name = pp->value;
+ memcpy(pp->value, ps, sz - 1);
+ ((char *)pp->value)[sz - 1] = 0;
+ dt_dprintk("fixed up name for %s -> %s\n", pathp,
+ (char *)pp->value);
+ /* Generic device initialization */
+ np->dev.type = DEV_DT;
+ np->dev.of_node = np;
+ }
+ }
+ if ( allnextpp )
+ {
+ *prev_pp = NULL;
+ np->name = (np->name) ? : dt_get_property(np, "name", NULL);
+ np->type = dt_get_property(np, "device_type", NULL);
+
+ if ( !np->name )
+ np->name = "<NULL>";
+ if ( !np->type )
+ np->type = "<NULL>";
+ }
+ while ( tag == FDT_BEGIN_NODE || tag == FDT_NOP )
+ {
+ if ( tag == FDT_NOP )
+ *p += 4;
+ else
+ mem = unflatten_dt_node(fdt, mem, p, np, allnextpp, fpsize);
+ tag = be32_to_cpup((__be32 *)(*p));
+ }
+ if ( tag != FDT_END_NODE )
+ {
+ printk(XENLOG_WARNING "Weird tag at end of node: %x\n", tag);
+ return mem;
+ }
+
+ *p += 4;
+ return mem;
+}
+
+int unflatten_device_tree(const void *fdt, struct dt_device_node **mynodes)
+{
+ unsigned long start, mem, size;
+ struct dt_device_node **allnextp = mynodes;
+
+ dt_dprintk(" -> unflatten_device_tree()\n");
+
+ dt_dprintk("Unflattening device tree:\n");
+ dt_dprintk("magic: %#08x\n", fdt_magic(fdt));
+ dt_dprintk("size: %#08x\n", fdt_totalsize(fdt));
+ dt_dprintk("version: %#08x\n", fdt_version(fdt));
+
+ /* First pass, scan for size */
+ start = ((unsigned long)fdt) + fdt_off_dt_struct(fdt);
+ size = unflatten_dt_node(fdt, 0, &start, NULL, NULL, 0);
+ if ( !size )
+ return -EINVAL;
+
+ size = (size | 3) + 1;
+
+ dt_dprintk(" size is %#lx allocating...\n", size);
+
+ /* Allocate memory for the expanded device tree */
+ mem = (unsigned long)_xmalloc (size + 4, __alignof__(struct dt_device_node));
+ if ( !mem )
+ return -ENOMEM;
+
+ ((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeefU);
+
+ dt_dprintk(" unflattening %lx...\n", mem);
+
+ /* Second pass, do actual unflattening */
+ start = ((unsigned long)fdt) + fdt_off_dt_struct(fdt);
+ unflatten_dt_node(fdt, mem, &start, NULL, &allnextp, 0);
+ if ( be32_to_cpup((__be32 *)start) != FDT_END )
+ {
+ printk(XENLOG_ERR "Weird tag at end of tree: %08x\n",
+ *((u32 *)start));
+ xfree((void *)mem);
+ return -EINVAL;
+ }
+
+ if ( be32_to_cpu(((__be32 *)mem)[size / 4]) != 0xdeadbeefU )
+ {
+ printk(XENLOG_ERR "End of tree marker overwritten: %08x\n",
+ be32_to_cpu(((__be32 *)mem)[size / 4]));
+ xfree((void *)mem);
+ return -EINVAL;
+ }
+
+ *allnextp = NULL;
+
+ dt_dprintk(" <- unflatten_device_tree()\n");
+
+ return 0;
+}
+
+static void dt_alias_add(struct dt_alias_prop *ap,
+ struct dt_device_node *np,
+ int id, const char *stem, int stem_len)
+{
+ ap->np = np;
+ ap->id = id;
+ strlcpy(ap->stem, stem, stem_len + 1);
+ list_add_tail(&ap->link, &aliases_lookup);
+ dt_dprintk("adding DT alias:%s: stem=%s id=%d node=%s\n",
+ ap->alias, ap->stem, ap->id, dt_node_full_name(np));
+}
+
+/**
+ * dt_alias_scan - Scan all properties of 'aliases' node
+ *
+ * The function scans all the properties of 'aliases' node and populate
+ * the the global lookup table with the properties. It returns the
+ * number of alias_prop found, or error code in error case.
+ */
+static void __init dt_alias_scan(void)
+{
+ const struct dt_property *pp;
+ const struct dt_device_node *aliases;
+
+ aliases = dt_find_node_by_path("/aliases");
+ if ( !aliases )
+ return;
+
+ dt_for_each_property_node( aliases, pp )
+ {
+ const char *start = pp->name;
+ const char *end = start + strlen(start);
+ struct dt_device_node *np;
+ struct dt_alias_prop *ap;
+ int id, len;
+
+ /* Skip those we do not want to proceed */
+ if ( !strcmp(pp->name, "name") ||
+ !strcmp(pp->name, "phandle") ||
+ !strcmp(pp->name, "linux,phandle") )
+ continue;
+
+ np = dt_find_node_by_path(pp->value);
+ if ( !np )
+ continue;
+
+ /* walk the alias backwards to extract the id and work out
+ * the 'stem' string */
+ while ( isdigit(*(end-1)) && end > start )
+ end--;
+ len = end - start;
+
+ id = simple_strtoll(end, NULL, 10);
+
+ /* Allocate an alias_prop with enough space for the stem */
+ ap = _xmalloc(sizeof(*ap) + len + 1, 4);
+ if ( !ap )
+ continue;
+ ap->alias = start;
+ dt_alias_add(ap, np, id, start, len);
+ }
+}
+
+struct dt_device_node * __init
+dt_find_interrupt_controller(const struct dt_device_match *matches)
+{
+ struct dt_device_node *np = NULL;
+
+ while ( (np = dt_find_matching_node(np, matches)) )
+ {
+ if ( !dt_find_property(np, "interrupt-controller", NULL) )
+ continue;
+
+ if ( dt_get_parent(np) )
+ break;
+ }
+
+ return np;
+}
+
+void __init dt_unflatten_host_device_tree(void)
+{
+ int error = unflatten_device_tree(device_tree_flattened, &dt_host);
+
+ if ( error )
+ panic("unflatten_device_tree failed with error %d\n", error);
+
+ dt_alias_scan();
+}
+
+int dt_get_pci_domain_nr(struct dt_device_node *node)
+{
+ u32 domain;
+ int error;
+
+ error = dt_property_read_u32(node, "linux,pci-domain", &domain);
+ if ( !error )
+ return -EINVAL;
+
+ return (u16)domain;
+}
+
+/*
+ * Local variables:
+ * mode: C
+ * c-file-style: "BSD"
+ * c-basic-offset: 4
+ * indent-tabs-mode: nil
+ * End:
+ */
deleted file mode 100644
@@ -1,2253 +0,0 @@
-/*
- * Device Tree
- *
- * Copyright (C) 2012 Citrix Systems, Inc.
- * Copyright 2009 Benjamin Herrenschmidt, IBM Corp
- * benh@kernel.crashing.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <xen/types.h>
-#include <xen/init.h>
-#include <xen/guest_access.h>
-#include <xen/device_tree.h>
-#include <xen/kernel.h>
-#include <xen/lib.h>
-#include <xen/libfdt/libfdt.h>
-#include <xen/mm.h>
-#include <xen/stdarg.h>
-#include <xen/string.h>
-#include <xen/cpumask.h>
-#include <xen/ctype.h>
-#include <asm/setup.h>
-#include <xen/err.h>
-
-const void *device_tree_flattened;
-dt_irq_xlate_func dt_irq_xlate;
-/* Host device tree */
-struct dt_device_node *dt_host;
-/* Interrupt controller node*/
-const struct dt_device_node *dt_interrupt_controller;
-DEFINE_RWLOCK(dt_host_lock);
-
-/**
- * struct dt_alias_prop - Alias property in 'aliases' node
- * @link: List node to link the structure in aliases_lookup list
- * @alias: Alias property name
- * @np: Pointer to device_node that the alias stands for
- * @id: Index value from end of alias name
- * @stem: Alias string without the index
- *
- * The structure represents one alias property of 'aliases' node as
- * an entry in aliases_lookup list.
- */
-struct dt_alias_prop {
- struct list_head link;
- const char *alias;
- struct dt_device_node *np;
- int id;
- char stem[0];
-};
-
-static LIST_HEAD(aliases_lookup);
-
-#ifdef CONFIG_DEVICE_TREE_DEBUG
-static void dt_dump_addr(const char *s, const __be32 *addr, int na)
-{
- dt_dprintk("%s", s);
- while ( na-- )
- dt_dprintk(" %08x", be32_to_cpu(*(addr++)));
- dt_dprintk("\n");
-}
-#else
-static void dt_dump_addr(const char *s, const __be32 *addr, int na) { }
-#endif
-
-#define DT_BAD_ADDR ((u64)-1)
-
-/* Max address size we deal with */
-#define DT_MAX_ADDR_CELLS 4
-#define DT_CHECK_ADDR_COUNT(na) ((na) > 0 && (na) <= DT_MAX_ADDR_CELLS)
-#define DT_CHECK_COUNTS(na, ns) (DT_CHECK_ADDR_COUNT(na) && (ns) > 0)
-
-/* Callbacks for bus specific translators */
-struct dt_bus
-{
- const char *name;
- const char *addresses;
- bool (*match)(const struct dt_device_node *node);
- void (*count_cells)(const struct dt_device_node *child,
- int *addrc, int *sizec);
- u64 (*map)(__be32 *addr, const __be32 *range, int na, int ns, int pna);
- int (*translate)(__be32 *addr, u64 offset, int na);
- unsigned int (*get_flags)(const __be32 *addr);
-};
-
-void dt_get_range(const __be32 **cellp, const struct dt_device_node *np,
- u64 *address, u64 *size)
-{
- *address = dt_next_cell(dt_n_addr_cells(np), cellp);
- *size = dt_next_cell(dt_n_size_cells(np), cellp);
-}
-
-void dt_set_cell(__be32 **cellp, int size, u64 val)
-{
- int cells = size;
-
- while ( size-- )
- {
- (*cellp)[size] = cpu_to_fdt32(val);
- val >>= 32;
- }
-
- (*cellp) += cells;
-}
-
-void dt_set_range(__be32 **cellp, const struct dt_device_node *np,
- u64 address, u64 size)
-{
- dt_set_cell(cellp, dt_n_addr_cells(np), address);
- dt_set_cell(cellp, dt_n_size_cells(np), size);
-}
-
-void dt_child_set_range(__be32 **cellp, int addrcells, int sizecells,
- u64 address, u64 size)
-{
- dt_set_cell(cellp, addrcells, address);
- dt_set_cell(cellp, sizecells, size);
-}
-
-static void __init *unflatten_dt_alloc(unsigned long *mem, unsigned long size,
- unsigned long align)
-{
- void *res;
-
- *mem = ROUNDUP(*mem, align);
- res = (void *)*mem;
- *mem += size;
-
- return res;
-}
-
-/* Find a property with a given name for a given node and return it. */
-const struct dt_property *dt_find_property(const struct dt_device_node *np,
- const char *name, u32 *lenp)
-{
- const struct dt_property *pp;
-
- if ( !np )
- return NULL;
-
- for ( pp = np->properties; pp; pp = pp->next )
- {
- if ( dt_prop_cmp(pp->name, name) == 0 )
- {
- if ( lenp )
- *lenp = pp->length;
- break;
- }
- }
-
- return pp;
-}
-
-const void *dt_get_property(const struct dt_device_node *np,
- const char *name, u32 *lenp)
-{
- const struct dt_property *pp = dt_find_property(np, name, lenp);
-
- return pp ? pp->value : NULL;
-}
-
-bool dt_property_read_u32(const struct dt_device_node *np,
- const char *name, u32 *out_value)
-{
- u32 len;
- const __be32 *val;
-
- val = dt_get_property(np, name, &len);
- if ( !val || len < sizeof(*out_value) )
- return 0;
-
- *out_value = be32_to_cpup(val);
-
- return 1;
-}
-
-
-bool dt_property_read_u64(const struct dt_device_node *np,
- const char *name, u64 *out_value)
-{
- u32 len;
- const __be32 *val;
-
- val = dt_get_property(np, name, &len);
- if ( !val || len < sizeof(*out_value) )
- return 0;
-
- *out_value = dt_read_number(val, 2);
-
- return 1;
-}
-int dt_property_read_string(const struct dt_device_node *np,
- const char *propname, const char **out_string)
-{
- const struct dt_property *pp = dt_find_property(np, propname, NULL);
-
- if ( !pp )
- return -EINVAL;
- if ( !pp->length )
- return -ENODATA;
- if ( strnlen(pp->value, pp->length) >= pp->length )
- return -EILSEQ;
-
- *out_string = pp->value;
-
- return 0;
-}
-
-/**
- * dt_find_property_value_of_size
- *
- * @np: device node from which the property value is to be read.
- * @propname: name of the property to be searched.
- * @min: minimum allowed length of property value
- * @max: maximum allowed length of property value (0 means unlimited)
- * @len: if !=NULL, actual length is written to here
- *
- * Search for a property in a device node and valid the requested size.
- *
- * Return: The property value on success, -EINVAL if the property does not
- * exist, -ENODATA if property does not have a value, and -EOVERFLOW if the
- * property data is too small or too large.
- */
-static void *dt_find_property_value_of_size(const struct dt_device_node *np,
- const char *propname, u32 min,
- u32 max, size_t *len)
-{
- const struct dt_property *prop = dt_find_property(np, propname, NULL);
-
- if ( !prop )
- return ERR_PTR(-EINVAL);
- if ( !prop->value )
- return ERR_PTR(-ENODATA);
- if ( prop->length < min )
- return ERR_PTR(-EOVERFLOW);
- if ( max && prop->length > max )
- return ERR_PTR(-EOVERFLOW);
-
- if ( len )
- *len = prop->length;
-
- return prop->value;
-}
-
-int dt_property_read_variable_u32_array(const struct dt_device_node *np,
- const char *propname, u32 *out_values,
- size_t sz_min, size_t sz_max)
-{
- size_t sz, count;
- const __be32 *val = dt_find_property_value_of_size(np, propname,
- (sz_min * sizeof(*out_values)),
- (sz_max * sizeof(*out_values)),
- &sz);
-
- if ( IS_ERR(val) )
- return PTR_ERR(val);
-
- if ( !sz_max )
- sz = sz_min;
- else
- sz /= sizeof(*out_values);
-
- count = sz;
- while ( count-- )
- *out_values++ = be32_to_cpup(val++);
-
- return sz;
-}
-
-int dt_property_match_string(const struct dt_device_node *np,
- const char *propname, const char *string)
-{
- const struct dt_property *dtprop = dt_find_property(np, propname, NULL);
- size_t l;
- int i;
- const char *p, *end;
-
- if ( !dtprop )
- return -EINVAL;
- if ( !dtprop->value )
- return -ENODATA;
-
- p = dtprop->value;
- end = p + dtprop->length;
-
- for ( i = 0; p < end; i++, p += l )
- {
- l = strnlen(p, end - p) + 1;
- if ( p + l > end )
- return -EILSEQ;
- if ( strcmp(string, p) == 0 )
- return i; /* Found it; return index */
- }
- return -ENODATA;
-}
-
-bool dt_device_is_compatible(const struct dt_device_node *device,
- const char *compat)
-{
- const char* cp;
- u32 cplen, l;
-
- cp = dt_get_property(device, "compatible", &cplen);
- if ( cp == NULL )
- return 0;
- while ( cplen > 0 )
- {
- if ( dt_compat_cmp(cp, compat) == 0 )
- return 1;
- l = strlen(cp) + 1;
- cp += l;
- cplen -= l;
- }
-
- return 0;
-}
-
-bool dt_machine_is_compatible(const char *compat)
-{
- const struct dt_device_node *root;
- bool rc = false;
-
- root = dt_find_node_by_path("/");
- if ( root )
- {
- rc = dt_device_is_compatible(root, compat);
- }
- return rc;
-}
-
-struct dt_device_node *dt_find_node_by_name(struct dt_device_node *from,
- const char *name)
-{
- struct dt_device_node *np;
- struct dt_device_node *dt;
-
- dt = from ? from->allnext : dt_host;
- dt_for_each_device_node(dt, np)
- if ( np->name && (dt_node_cmp(np->name, name) == 0) )
- break;
-
- return np;
-}
-
-struct dt_device_node *dt_find_node_by_type(struct dt_device_node *from,
- const char *type)
-{
- struct dt_device_node *np;
- struct dt_device_node *dt;
-
- dt = from ? from->allnext : dt_host;
- dt_for_each_device_node(dt, np)
- if ( np->type && (dt_node_cmp(np->type, type) == 0) )
- break;
-
- return np;
-}
-
-struct dt_device_node *dt_find_node_by_path_from(struct dt_device_node *from,
- const char *path)
-{
- struct dt_device_node *np;
-
- dt_for_each_device_node(from, np)
- if ( np->full_name && (dt_node_cmp(np->full_name, path) == 0) )
- break;
-
- return np;
-}
-
-int dt_find_node_by_gpath(XEN_GUEST_HANDLE(char) u_path, uint32_t u_plen,
- struct dt_device_node **node)
-{
- char *path;
-
- path = safe_copy_string_from_guest(u_path, u_plen, PAGE_SIZE);
- if ( IS_ERR(path) )
- return PTR_ERR(path);
-
- *node = dt_find_node_by_path(path);
-
- xfree(path);
-
- return (*node == NULL) ? -ESRCH : 0;
-}
-
-struct dt_device_node *dt_find_node_by_alias(const char *alias)
-{
- const struct dt_alias_prop *app;
-
- list_for_each_entry( app, &aliases_lookup, link )
- {
- if ( !strcmp(app->alias, alias) )
- return app->np;
- }
-
- return NULL;
-}
-
-const struct dt_device_match *
-dt_match_node(const struct dt_device_match *matches,
- const struct dt_device_node *node)
-{
- if ( !matches )
- return NULL;
-
- while ( matches->path || matches->type ||
- matches->compatible || matches->not_available || matches->prop )
- {
- bool match = true;
-
- if ( matches->path )
- match &= dt_node_path_is_equal(node, matches->path);
-
- if ( matches->type )
- match &= dt_device_type_is_equal(node, matches->type);
-
- if ( matches->compatible )
- match &= dt_device_is_compatible(node, matches->compatible);
-
- if ( matches->not_available )
- match &= !dt_device_is_available(node);
-
- if ( matches->prop )
- match &= dt_find_property(node, matches->prop, NULL) != NULL;
-
- if ( match )
- return matches;
- matches++;
- }
-
- return NULL;
-}
-
-const struct dt_device_node *dt_get_parent(const struct dt_device_node *node)
-{
- if ( !node )
- return NULL;
-
- return node->parent;
-}
-
-struct dt_device_node *
-dt_find_compatible_node(struct dt_device_node *from,
- const char *type,
- const char *compatible)
-{
- struct dt_device_node *np;
- struct dt_device_node *dt;
-
- dt = from ? from->allnext : dt_host;
- dt_for_each_device_node(dt, np)
- {
- if ( type
- && !(np->type && (dt_node_cmp(np->type, type) == 0)) )
- continue;
- if ( dt_device_is_compatible(np, compatible) )
- break;
- }
-
- return np;
-}
-
-struct dt_device_node *
-dt_find_matching_node(struct dt_device_node *from,
- const struct dt_device_match *matches)
-{
- struct dt_device_node *np;
- struct dt_device_node *dt;
-
- dt = from ? from->allnext : dt_host;
- dt_for_each_device_node(dt, np)
- {
- if ( dt_match_node(matches, np) )
- return np;
- }
-
- return NULL;
-}
-
-static int __dt_n_addr_cells(const struct dt_device_node *np, bool parent)
-{
- const __be32 *ip;
-
- do {
- if ( np->parent && !parent )
- np = np->parent;
- parent = false;
-
- ip = dt_get_property(np, "#address-cells", NULL);
- if ( ip )
- return be32_to_cpup(ip);
- } while ( np->parent );
- /* No #address-cells property for the root node */
- return DT_ROOT_NODE_ADDR_CELLS_DEFAULT;
-}
-
-static int __dt_n_size_cells(const struct dt_device_node *np, bool parent)
-{
- const __be32 *ip;
-
- do {
- if ( np->parent && !parent )
- np = np->parent;
- parent = false;
-
- ip = dt_get_property(np, "#size-cells", NULL);
- if ( ip )
- return be32_to_cpup(ip);
- } while ( np->parent );
- /* No #address-cells property for the root node */
- return DT_ROOT_NODE_SIZE_CELLS_DEFAULT;
-}
-
-int dt_n_addr_cells(const struct dt_device_node *np)
-{
- return __dt_n_addr_cells(np, false);
-}
-
-int dt_n_size_cells(const struct dt_device_node *np)
-{
- return __dt_n_size_cells(np, false);
-}
-
-int dt_child_n_addr_cells(const struct dt_device_node *parent)
-{
- return __dt_n_addr_cells(parent, true);
-}
-
-int dt_child_n_size_cells(const struct dt_device_node *parent)
-{
- return __dt_n_size_cells(parent, true);
-}
-
-/*
- * These are defined in Linux where much of this code comes from, but
- * are currently unused outside this file in the context of Xen.
- */
-#define IORESOURCE_BITS 0x000000ff /* Bus-specific bits */
-
-#define IORESOURCE_TYPE_BITS 0x00001f00 /* Resource type */
-#define IORESOURCE_IO 0x00000100 /* PCI/ISA I/O ports */
-#define IORESOURCE_MEM 0x00000200
-#define IORESOURCE_REG 0x00000300 /* Register offsets */
-#define IORESOURCE_IRQ 0x00000400
-#define IORESOURCE_DMA 0x00000800
-#define IORESOURCE_BUS 0x00001000
-
-#define IORESOURCE_PREFETCH 0x00002000 /* No side effects */
-#define IORESOURCE_READONLY 0x00004000
-#define IORESOURCE_CACHEABLE 0x00008000
-#define IORESOURCE_RANGELENGTH 0x00010000
-#define IORESOURCE_SHADOWABLE 0x00020000
-
-/*
- * Default translator (generic bus)
- */
-static bool dt_bus_default_match(const struct dt_device_node *node)
-{
- /* Root node doesn't have "ranges" property */
- if ( node->parent == NULL )
- return 1;
-
- /* The default bus is only used when the "ranges" property exists.
- * Otherwise we can't translate the address
- */
- return (dt_get_property(node, "ranges", NULL) != NULL);
-}
-
-static void dt_bus_default_count_cells(const struct dt_device_node *dev,
- int *addrc, int *sizec)
-{
- if ( addrc )
- *addrc = dt_n_addr_cells(dev);
- if ( sizec )
- *sizec = dt_n_size_cells(dev);
-}
-
-static u64 dt_bus_default_map(__be32 *addr, const __be32 *range,
- int na, int ns, int pna)
-{
- u64 cp, s, da;
-
- cp = dt_read_number(range, na);
- s = dt_read_number(range + na + pna, ns);
- da = dt_read_number(addr, na);
-
- dt_dprintk("DT: default map, cp=%llx, s=%llx, da=%llx\n",
- (unsigned long long)cp, (unsigned long long)s,
- (unsigned long long)da);
-
- /*
- * If the number of address cells is larger than 2 we assume the
- * mapping doesn't specify a physical address. Rather, the address
- * specifies an identifier that must match exactly.
- */
- if ( na > 2 && memcmp(range, addr, na * 4) != 0 )
- return DT_BAD_ADDR;
-
- if ( da < cp || da >= (cp + s) )
- return DT_BAD_ADDR;
- return da - cp;
-}
-
-static int dt_bus_default_translate(__be32 *addr, u64 offset, int na)
-{
- u64 a = dt_read_number(addr, na);
-
- memset(addr, 0, na * 4);
- a += offset;
- if ( na > 1 )
- addr[na - 2] = cpu_to_be32(a >> 32);
- addr[na - 1] = cpu_to_be32(a & 0xffffffffu);
-
- return 0;
-}
-static unsigned int dt_bus_default_get_flags(const __be32 *addr)
-{
- return IORESOURCE_MEM;
-}
-
-/*
- * PCI bus specific translator
- */
-
-static bool dt_node_is_pci(const struct dt_device_node *np)
-{
- bool is_pci = !strcmp(np->name, "pcie") || !strcmp(np->name, "pci");
-
- if ( is_pci )
- printk(XENLOG_WARNING "%s: Missing device_type\n", np->full_name);
-
- return is_pci;
-}
-
-static bool dt_bus_pci_match(const struct dt_device_node *np)
-{
- /*
- * "pciex" is PCI Express "vci" is for the /chaos bridge on 1st-gen PCI
- * powermacs "ht" is hypertransport
- *
- * If none of the device_type match, and that the node name is
- * "pcie" or "pci", accept the device as PCI (with a warning).
- */
- return !strcmp(np->type, "pci") || !strcmp(np->type, "pciex") ||
- !strcmp(np->type, "vci") || !strcmp(np->type, "ht") ||
- dt_node_is_pci(np);
-}
-
-static void dt_bus_pci_count_cells(const struct dt_device_node *np,
- int *addrc, int *sizec)
-{
- if (addrc)
- *addrc = 3;
- if (sizec)
- *sizec = 2;
-}
-
-static unsigned int dt_bus_pci_get_flags(const __be32 *addr)
-{
- unsigned int flags = 0;
- u32 w = be32_to_cpup(addr);
-
- switch((w >> 24) & 0x03) {
- case 0x01:
- flags |= IORESOURCE_IO;
- break;
- case 0x02: /* 32 bits */
- case 0x03: /* 64 bits */
- flags |= IORESOURCE_MEM;
- break;
- }
- if (w & 0x40000000)
- flags |= IORESOURCE_PREFETCH;
- return flags;
-}
-
-static u64 dt_bus_pci_map(__be32 *addr, const __be32 *range, int na, int ns,
- int pna)
-{
- u64 cp, s, da;
- unsigned int af, rf;
-
- af = dt_bus_pci_get_flags(addr);
- rf = dt_bus_pci_get_flags(range);
-
- /* Check address type match */
- if ((af ^ rf) & (IORESOURCE_MEM | IORESOURCE_IO))
- return DT_BAD_ADDR;
-
- /* Read address values, skipping high cell */
- cp = dt_read_number(range + 1, na - 1);
- s = dt_read_number(range + na + pna, ns);
- da = dt_read_number(addr + 1, na - 1);
-
- dt_dprintk("DT: PCI map, cp=%llx, s=%llx, da=%llx\n",
- (unsigned long long)cp, (unsigned long long)s,
- (unsigned long long)da);
-
- if (da < cp || da >= (cp + s))
- return DT_BAD_ADDR;
- return da - cp;
-}
-
-static int dt_bus_pci_translate(__be32 *addr, u64 offset, int na)
-{
- return dt_bus_default_translate(addr + 1, offset, na - 1);
-}
-
-/*
- * Array of bus specific translators
- */
-static const struct dt_bus dt_busses[] =
-{
- /* PCI */
- {
- .name = "pci",
- .addresses = "assigned-addresses",
- .match = dt_bus_pci_match,
- .count_cells = dt_bus_pci_count_cells,
- .map = dt_bus_pci_map,
- .translate = dt_bus_pci_translate,
- .get_flags = dt_bus_pci_get_flags,
- },
- /* Default */
- {
- .name = "default",
- .addresses = "reg",
- .match = dt_bus_default_match,
- .count_cells = dt_bus_default_count_cells,
- .map = dt_bus_default_map,
- .translate = dt_bus_default_translate,
- .get_flags = dt_bus_default_get_flags,
- },
-};
-
-static const struct dt_bus *dt_match_bus(const struct dt_device_node *np)
-{
- int i;
-
- for ( i = 0; i < ARRAY_SIZE(dt_busses); i++ )
- if ( !dt_busses[i].match || dt_busses[i].match(np) )
- return &dt_busses[i];
-
- return NULL;
-}
-
-static const __be32 *dt_get_address(const struct dt_device_node *dev,
- unsigned int index, u64 *size,
- unsigned int *flags)
-{
- const __be32 *prop;
- u32 psize;
- const struct dt_device_node *parent;
- const struct dt_bus *bus;
- int onesize, i, na, ns;
-
- /* Get parent & match bus type */
- parent = dt_get_parent(dev);
- if ( parent == NULL )
- return NULL;
-
- bus = dt_match_bus(parent);
- if ( !bus )
- return NULL;
- bus->count_cells(dev, &na, &ns);
-
- if ( !DT_CHECK_ADDR_COUNT(na) )
- return NULL;
-
- /* Get "reg" or "assigned-addresses" property */
- prop = dt_get_property(dev, bus->addresses, &psize);
- if ( prop == NULL )
- return NULL;
- psize /= 4;
-
- onesize = na + ns;
- for ( i = 0; psize >= onesize; psize -= onesize, prop += onesize, i++ )
- {
- if ( i == index )
- {
- if ( size )
- *size = dt_read_number(prop + na, ns);
- if ( flags )
- *flags = bus->get_flags(prop);
- return prop;
- }
- }
- return NULL;
-}
-
-static int dt_translate_one(const struct dt_device_node *parent,
- const struct dt_bus *bus,
- const struct dt_bus *pbus,
- __be32 *addr, int na, int ns,
- int pna, const char *rprop)
-{
- const __be32 *ranges;
- unsigned int rlen;
- int rone;
- u64 offset = DT_BAD_ADDR;
-
- ranges = dt_get_property(parent, rprop, &rlen);
- if ( ranges == NULL )
- {
- printk(XENLOG_ERR "DT: no ranges; cannot translate\n");
- return 1;
- }
- if ( rlen == 0 )
- {
- offset = dt_read_number(addr, na);
- memset(addr, 0, pna * 4);
- dt_dprintk("DT: empty ranges; 1:1 translation\n");
- goto finish;
- }
-
- dt_dprintk("DT: walking ranges...\n");
-
- /* Now walk through the ranges */
- rlen /= 4;
- rone = na + pna + ns;
- for ( ; rlen >= rone; rlen -= rone, ranges += rone )
- {
- offset = bus->map(addr, ranges, na, ns, pna);
- if ( offset != DT_BAD_ADDR )
- break;
- }
- if ( offset == DT_BAD_ADDR )
- {
- dt_dprintk("DT: not found !\n");
- return 1;
- }
- memcpy(addr, ranges + na, 4 * pna);
-
-finish:
- dt_dump_addr("DT: parent translation for:", addr, pna);
- dt_dprintk("DT: with offset: %llx\n", (unsigned long long)offset);
-
- /* Translate it into parent bus space */
- return pbus->translate(addr, offset, pna);
-}
-
-/*
- * Translate an address from the device-tree into a CPU physical address,
- * this walks up the tree and applies the various bus mappings on the
- * way.
- *
- * Note: We consider that crossing any level with #size-cells == 0 to mean
- * that translation is impossible (that is we are not dealing with a value
- * that can be mapped to a cpu physical address). This is not really specified
- * that way, but this is traditionally the way IBM at least do things
- */
-static u64 __dt_translate_address(const struct dt_device_node *dev,
- const __be32 *in_addr, const char *rprop)
-{
- const struct dt_device_node *parent = NULL;
- const struct dt_bus *bus, *pbus;
- __be32 addr[DT_MAX_ADDR_CELLS];
- int na, ns, pna, pns;
- u64 result = DT_BAD_ADDR;
-
- dt_dprintk("DT: ** translation for device %s **\n", dev->full_name);
-
- /* Get parent & match bus type */
- parent = dt_get_parent(dev);
- if ( parent == NULL )
- goto bail;
- bus = dt_match_bus(parent);
- if ( !bus )
- goto bail;
-
- /* Count address cells & copy address locally */
- bus->count_cells(dev, &na, &ns);
- if ( !DT_CHECK_COUNTS(na, ns) )
- {
- printk(XENLOG_ERR "dt_parse: Bad cell count for device %s\n",
- dev->full_name);
- goto bail;
- }
- memcpy(addr, in_addr, na * 4);
-
- dt_dprintk("DT: bus is %s (na=%d, ns=%d) on %s\n",
- bus->name, na, ns, parent->full_name);
- dt_dump_addr("DT: translating address:", addr, na);
-
- /* Translate */
- for ( ;; )
- {
- /* Switch to parent bus */
- dev = parent;
- parent = dt_get_parent(dev);
-
- /* If root, we have finished */
- if ( parent == NULL )
- {
- dt_dprintk("DT: reached root node\n");
- result = dt_read_number(addr, na);
- break;
- }
-
- /* Get new parent bus and counts */
- pbus = dt_match_bus(parent);
- if ( pbus == NULL )
- {
- printk("DT: %s is not a valid bus\n", parent->full_name);
- break;
- }
- pbus->count_cells(dev, &pna, &pns);
- if ( !DT_CHECK_COUNTS(pna, pns) )
- {
- printk(XENLOG_ERR "dt_parse: Bad cell count for parent %s\n",
- dev->full_name);
- break;
- }
-
- dt_dprintk("DT: parent bus is %s (na=%d, ns=%d) on %s\n",
- pbus->name, pna, pns, parent->full_name);
-
- /* Apply bus translation */
- if ( dt_translate_one(dev, bus, pbus, addr, na, ns, pna, rprop) )
- break;
-
- /* Complete the move up one level */
- na = pna;
- ns = pns;
- bus = pbus;
-
- dt_dump_addr("DT: one level translation:", addr, na);
- }
-
-bail:
- return result;
-}
-
-/* dt_device_address - Translate device tree address and return it */
-int dt_device_get_address(const struct dt_device_node *dev, unsigned int index,
- u64 *addr, u64 *size)
-{
- const __be32 *addrp;
- unsigned int flags;
-
- addrp = dt_get_address(dev, index, size, &flags);
- if ( addrp == NULL )
- return -EINVAL;
-
- if ( !addr )
- return -EINVAL;
-
- *addr = __dt_translate_address(dev, addrp, "ranges");
-
- if ( *addr == DT_BAD_ADDR )
- return -EINVAL;
-
- return 0;
-}
-
-int dt_device_get_paddr(const struct dt_device_node *dev, unsigned int index,
- paddr_t *addr, paddr_t *size)
-{
- uint64_t dt_addr, dt_size;
- int ret;
-
- ret = dt_device_get_address(dev, index, &dt_addr, &dt_size);
- if ( ret )
- return ret;
-
- if ( !addr )
- return -EINVAL;
-
- if ( dt_addr != (paddr_t)dt_addr )
- {
- printk("Error: Physical address 0x%"PRIx64" for node=%s is greater than max width (%zu bytes) supported\n",
- dt_addr, dev->name, sizeof(paddr_t));
- return -ERANGE;
- }
-
- *addr = dt_addr;
-
- if ( size )
- {
- if ( dt_size != (paddr_t)dt_size )
- {
- printk("Error: Physical size 0x%"PRIx64" for node=%s is greater than max width (%zu bytes) supported\n",
- dt_size, dev->name, sizeof(paddr_t));
- return -ERANGE;
- }
-
- *size = dt_size;
- }
-
- return ret;
-}
-
-int dt_for_each_range(const struct dt_device_node *dev,
- int (*cb)(const struct dt_device_node *dev,
- uint64_t addr, uint64_t length,
- void *data),
- void *data)
-{
- const struct dt_device_node *parent = NULL;
- const struct dt_bus *bus, *pbus;
- const __be32 *ranges;
- __be32 addr[DT_MAX_ADDR_CELLS];
- unsigned int rlen;
- int na, ns, pna, pns, rone;
-
- bus = dt_match_bus(dev);
- if ( !bus )
- return 0; /* device is not a bus */
-
- parent = dt_get_parent(dev);
- if ( parent == NULL )
- return -EINVAL;
-
- ranges = dt_get_property(dev, "ranges", &rlen);
- if ( ranges == NULL )
- {
- printk(XENLOG_ERR "DT: no ranges; cannot enumerate %s\n",
- dev->full_name);
- return -EINVAL;
- }
- if ( rlen == 0 ) /* Nothing to do */
- return 0;
-
- bus->count_cells(dev, &na, &ns);
- if ( !DT_CHECK_COUNTS(na, ns) )
- {
- printk(XENLOG_ERR "dt_parse: Bad cell count for device %s\n",
- dev->full_name);
- return -EINVAL;
- }
-
- pbus = dt_match_bus(parent);
- if ( pbus == NULL )
- {
- printk("DT: %s is not a valid bus\n", parent->full_name);
- return -EINVAL;
- }
-
- pbus->count_cells(dev, &pna, &pns);
- if ( !DT_CHECK_COUNTS(pna, pns) )
- {
- printk(XENLOG_ERR "dt_parse: Bad cell count for parent %s\n",
- dev->full_name);
- return -EINVAL;
- }
-
- /* Now walk through the ranges */
- rlen /= 4;
- rone = na + pna + ns;
-
- dt_dprintk("%s: dev=%s, bus=%s, parent=%s, rlen=%d, rone=%d\n",
- __func__,
- dt_node_name(dev), bus->name,
- dt_node_name(parent), rlen, rone);
-
- for ( ; rlen >= rone; rlen -= rone, ranges += rone )
- {
- uint64_t a, s;
- int ret;
-
- memcpy(addr, ranges + na, 4 * pna);
-
- a = __dt_translate_address(dev, addr, "ranges");
- s = dt_read_number(ranges + na + pna, ns);
-
- ret = cb(dev, a, s, data);
- if ( ret )
- {
- dt_dprintk(" -> callback failed=%d\n", ret);
- return ret;
- }
-
- }
-
- return 0;
-}
-
-/**
- * dt_find_node_by_phandle - Find a node given a phandle
- * @handle: phandle of the node to find
- *
- * Returns a node pointer.
- */
-struct dt_device_node *dt_find_node_by_phandle(dt_phandle handle)
-{
- struct dt_device_node *np;
-
- dt_for_each_device_node(dt_host, np)
- if ( np->phandle == handle )
- break;
-
- return np;
-}
-
-/**
- * dt_irq_find_parent - Given a device node, find its interrupt parent node
- * @child: pointer to device node
- *
- * Returns a pointer to the interrupt parent node, or NULL if the interrupt
- * parent could not be determined.
- */
-static const struct dt_device_node *
-dt_irq_find_parent(const struct dt_device_node *child)
-{
- const struct dt_device_node *p;
- const __be32 *parp;
-
- do
- {
- parp = dt_get_property(child, "interrupt-parent", NULL);
- if ( parp == NULL )
- p = dt_get_parent(child);
- else
- p = dt_find_node_by_phandle(be32_to_cpup(parp));
- child = p;
- } while ( p && dt_get_property(p, "#interrupt-cells", NULL) == NULL );
-
- return p;
-}
-
-unsigned int dt_number_of_irq(const struct dt_device_node *device)
-{
- const struct dt_device_node *p;
- const __be32 *intspec, *tmp;
- u32 intsize, intlen;
- int intnum;
-
- dt_dprintk("dt_irq_number: dev=%s\n", device->full_name);
-
- /* Try the new-style interrupts-extended first */
- intnum = dt_count_phandle_with_args(device, "interrupts-extended",
- "#interrupt-cells");
- if ( intnum >= 0 )
- {
- dt_dprintk(" using 'interrupts-extended' property\n");
- dt_dprintk(" intnum=%d\n", intnum);
- return intnum;
- }
-
- /* Get the interrupts property */
- intspec = dt_get_property(device, "interrupts", &intlen);
- if ( intspec == NULL )
- return 0;
- intlen /= sizeof(*intspec);
-
- dt_dprintk(" using 'interrupts' property\n");
- dt_dprintk(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
-
- /* Look for the interrupt parent. */
- p = dt_irq_find_parent(device);
- if ( p == NULL )
- return 0;
-
- /* Get size of interrupt specifier */
- tmp = dt_get_property(p, "#interrupt-cells", NULL);
- if ( tmp == NULL )
- return 0;
- intsize = be32_to_cpu(*tmp);
-
- dt_dprintk(" intsize=%d intlen=%d\n", intsize, intlen);
-
- return (intlen / intsize);
-}
-
-unsigned int dt_number_of_address(const struct dt_device_node *dev)
-{
- const __be32 *prop;
- u32 psize;
- const struct dt_device_node *parent;
- const struct dt_bus *bus;
- int onesize, na, ns;
-
- /* Get parent & match bus type */
- parent = dt_get_parent(dev);
- if ( parent == NULL )
- return 0;
-
- bus = dt_match_bus(parent);
- if ( !bus )
- return 0;
- bus->count_cells(dev, &na, &ns);
-
- if ( !DT_CHECK_COUNTS(na, ns) )
- return 0;
-
- /* Get "reg" or "assigned-addresses" property */
- prop = dt_get_property(dev, bus->addresses, &psize);
- if ( prop == NULL )
- return 0;
-
- psize /= 4;
- onesize = na + ns;
-
- return (psize / onesize);
-}
-
-int dt_for_each_irq_map(const struct dt_device_node *dev,
- int (*cb)(const struct dt_device_node *dev,
- const struct dt_irq *dt_irq,
- void *data),
- void *data)
-{
- const struct dt_device_node *ipar, *tnode, *old = NULL;
- const __be32 *tmp, *imap;
- u32 intsize = 1, addrsize, pintsize = 0, paddrsize = 0;
- u32 imaplen;
- int i, ret;
-
- struct dt_raw_irq dt_raw_irq;
- struct dt_irq dt_irq;
-
- dt_dprintk("%s: par=%s cb=%p data=%p\n", __func__,
- dev->full_name, cb, data);
-
- ipar = dev;
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
- if ( tmp != NULL )
- {
- intsize = be32_to_cpu(*tmp);
- break;
- }
- tnode = ipar;
- ipar = dt_irq_find_parent(ipar);
- } while ( ipar );
- if ( ipar == NULL )
- {
- dt_dprintk(" -> no parent found !\n");
- goto fail;
- }
-
- dt_dprintk("%s: ipar=%s, size=%d\n", __func__, ipar->full_name, intsize);
-
- if ( intsize > DT_MAX_IRQ_SPEC )
- {
- dt_dprintk(" -> too many irq specifier cells\n");
- goto fail;
- }
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = ipar;
- do {
- tmp = dt_get_property(old, "#address-cells", NULL);
- tnode = dt_get_parent(old);
- old = tnode;
- } while ( old && tmp == NULL );
-
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
-
- dt_dprintk(" -> addrsize=%d\n", addrsize);
-
- /* Now look for an interrupt-map */
- imap = dt_get_property(dev, "interrupt-map", &imaplen);
- /* No interrupt-map found. Ignore */
- if ( imap == NULL )
- {
- dt_dprintk(" -> no map, ignoring\n");
- return 0;
- }
- imaplen /= sizeof(u32);
-
- /* Parse interrupt-map */
- while ( imaplen > (addrsize + intsize + 1) )
- {
- /* skip child unit address and child interrupt specifier */
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- /* Get the interrupt parent */
- ipar = dt_find_node_by_phandle(be32_to_cpup(imap));
- imap++;
- --imaplen;
-
- /* Check if not found */
- if ( ipar == NULL )
- {
- dt_dprintk(" -> imap parent not found !\n");
- goto fail;
- }
-
- dt_dprintk(" -> ipar %s\n", dt_node_name(ipar));
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
- if ( tmp == NULL )
- {
- dt_dprintk(" -> parent lacks #interrupt-cells!\n");
- goto fail;
- }
- pintsize = be32_to_cpu(*tmp);
- tmp = dt_get_property(ipar, "#address-cells", NULL);
- paddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
-
- dt_dprintk(" -> pintsize=%d, paddrsize=%d\n",
- pintsize, paddrsize);
-
- if ( pintsize > DT_MAX_IRQ_SPEC )
- {
- dt_dprintk(" -> too many irq specifier cells in parent\n");
- goto fail;
- }
-
- /* Check for malformed properties */
- if ( imaplen < (paddrsize + pintsize) )
- goto fail;
-
- imap += paddrsize;
- imaplen -= paddrsize;
-
- dt_raw_irq.controller = ipar;
- dt_raw_irq.size = pintsize;
- for ( i = 0; i < pintsize; i++ )
- dt_raw_irq.specifier[i] = dt_read_number(imap + i, 1);
-
- if ( dt_raw_irq.controller != dt_interrupt_controller )
- {
- /*
- * We don't map IRQs connected to secondary IRQ controllers as
- * these IRQs have no meaning to us until they connect to the
- * primary controller.
- *
- * Secondary IRQ controllers will at some point connect to
- * the primary controller (possibly via other IRQ controllers).
- * We map the IRQs at that last connection point.
- */
- imap += pintsize;
- imaplen -= pintsize;
- dt_dprintk(" -> Skipped IRQ for secondary IRQ controller\n");
- continue;
- }
-
- ret = dt_irq_translate(&dt_raw_irq, &dt_irq);
- if ( ret )
- {
- dt_dprintk(" -> failed to translate IRQ: %d\n", ret);
- return ret;
- }
-
- ret = cb(dev, &dt_irq, data);
- if ( ret )
- {
- dt_dprintk(" -> callback failed=%d\n", ret);
- return ret;
- }
-
- imap += pintsize;
- imaplen -= pintsize;
-
- dt_dprintk(" -> imaplen=%d\n", imaplen);
- }
-
- return 0;
-
-fail:
- return -EINVAL;
-}
-
-/**
- * dt_irq_map_raw - Low level interrupt tree parsing
- * @parent: the device interrupt parent
- * @intspec: interrupt specifier ("interrupts" property of the device)
- * @ointsize: size of the passed in interrupt specifier
- * @addr: address specifier (start of "reg" property of the device)
- * @oirq: structure dt_raw_irq filled by this function
- *
- * Returns 0 on success and a negative number on error
- *
- * This function is a low-level interrupt tree walking function. It
- * can be used to do a partial walk with synthesized reg and interrupts
- * properties, for example when resolving PCI interrupts when no device
- * node exist for the parent.
- */
-static int dt_irq_map_raw(const struct dt_device_node *parent,
- const __be32 *intspec, u32 ointsize,
- const __be32 *addr,
- struct dt_raw_irq *oirq)
-{
- const struct dt_device_node *ipar, *tnode, *old = NULL, *newpar = NULL;
- const __be32 *tmp, *imap, *imask;
- u32 intsize = 1, addrsize, newintsize = 0, newaddrsize = 0;
- u32 imaplen;
- int match, i;
-
- dt_dprintk("dt_irq_map_raw: par=%s,intspec=[0x%08x 0x%08x...],ointsize=%d\n",
- parent->full_name, be32_to_cpup(intspec),
- be32_to_cpup(intspec + 1), ointsize);
-
- ipar = parent;
-
- /* First get the #interrupt-cells property of the current cursor
- * that tells us how to interpret the passed-in intspec. If there
- * is none, we are nice and just walk up the tree
- */
- do {
- tmp = dt_get_property(ipar, "#interrupt-cells", NULL);
- if ( tmp != NULL )
- {
- intsize = be32_to_cpu(*tmp);
- break;
- }
- tnode = ipar;
- ipar = dt_irq_find_parent(ipar);
- } while ( ipar );
- if ( ipar == NULL )
- {
- dt_dprintk(" -> no parent found !\n");
- goto fail;
- }
-
- dt_dprintk("dt_irq_map_raw: ipar=%s, size=%d\n", ipar->full_name, intsize);
-
- if ( ointsize != intsize )
- return -EINVAL;
-
- /* Look for this #address-cells. We have to implement the old linux
- * trick of looking for the parent here as some device-trees rely on it
- */
- old = ipar;
- do {
- tmp = dt_get_property(old, "#address-cells", NULL);
- tnode = dt_get_parent(old);
- old = tnode;
- } while ( old && tmp == NULL );
-
- old = NULL;
- addrsize = (tmp == NULL) ? 2 : be32_to_cpu(*tmp);
-
- dt_dprintk(" -> addrsize=%d\n", addrsize);
-
- /* Now start the actual "proper" walk of the interrupt tree */
- while ( ipar != NULL )
- {
- /* Now check if cursor is an interrupt-controller and if it is
- * then we are done
- */
- if ( dt_get_property(ipar, "interrupt-controller", NULL) != NULL )
- {
- dt_dprintk(" -> got it !\n");
- if ( intsize > DT_MAX_IRQ_SPEC )
- {
- dt_dprintk(" -> intsize(%u) greater than DT_MAX_IRQ_SPEC(%u)\n",
- intsize, DT_MAX_IRQ_SPEC);
- goto fail;
- }
- for ( i = 0; i < intsize; i++ )
- oirq->specifier[i] = dt_read_number(intspec + i, 1);
- oirq->size = intsize;
- oirq->controller = ipar;
- return 0;
- }
-
- /* Now look for an interrupt-map */
- imap = dt_get_property(ipar, "interrupt-map", &imaplen);
- /* No interrupt map, check for an interrupt parent */
- if ( imap == NULL )
- {
- dt_dprintk(" -> no map, getting parent\n");
- newpar = dt_irq_find_parent(ipar);
- goto skiplevel;
- }
- imaplen /= sizeof(u32);
-
- /* Look for a mask */
- imask = dt_get_property(ipar, "interrupt-map-mask", NULL);
-
- /* If we were passed no "reg" property and we attempt to parse
- * an interrupt-map, then #address-cells must be 0.
- * Fail if it's not.
- */
- if ( addr == NULL && addrsize != 0 )
- {
- dt_dprintk(" -> no reg passed in when needed !\n");
- goto fail;
- }
-
- /* Parse interrupt-map */
- match = 0;
- while ( imaplen > (addrsize + intsize + 1) && !match )
- {
- /* Compare specifiers */
- match = 1;
- for ( i = 0; i < addrsize && match; ++i )
- {
- __be32 mask = imask ? imask[i] : cpu_to_be32(0xffffffffu);
- match = ((addr[i] ^ imap[i]) & mask) == 0;
- }
- for ( ; i < (addrsize + intsize) && match; ++i )
- {
- __be32 mask = imask ? imask[i] : cpu_to_be32(0xffffffffu);
- match = ((intspec[i-addrsize] ^ imap[i]) & mask) == 0;
- }
- imap += addrsize + intsize;
- imaplen -= addrsize + intsize;
-
- dt_dprintk(" -> match=%d (imaplen=%d)\n", match, imaplen);
-
- /* Get the interrupt parent */
- newpar = dt_find_node_by_phandle(be32_to_cpup(imap));
- imap++;
- --imaplen;
-
- /* Check if not found */
- if ( newpar == NULL )
- {
- dt_dprintk(" -> imap parent not found !\n");
- goto fail;
- }
-
- /* Get #interrupt-cells and #address-cells of new
- * parent
- */
- tmp = dt_get_property(newpar, "#interrupt-cells", NULL);
- if ( tmp == NULL )
- {
- dt_dprintk(" -> parent lacks #interrupt-cells!\n");
- goto fail;
- }
- newintsize = be32_to_cpu(*tmp);
- tmp = dt_get_property(newpar, "#address-cells", NULL);
- newaddrsize = (tmp == NULL) ? 0 : be32_to_cpu(*tmp);
-
- dt_dprintk(" -> newintsize=%d, newaddrsize=%d\n",
- newintsize, newaddrsize);
-
- /* Check for malformed properties */
- if ( imaplen < (newaddrsize + newintsize) )
- goto fail;
-
- imap += newaddrsize + newintsize;
- imaplen -= newaddrsize + newintsize;
-
- dt_dprintk(" -> imaplen=%d\n", imaplen);
- }
- if ( !match )
- goto fail;
-
- old = newpar;
- addrsize = newaddrsize;
- intsize = newintsize;
- intspec = imap - intsize;
- addr = intspec - addrsize;
-
- skiplevel:
- /* Iterate again with new parent */
- dt_dprintk(" -> new parent: %s\n", dt_node_full_name(newpar));
- ipar = newpar;
- newpar = NULL;
- }
-fail:
- return -EINVAL;
-}
-
-int dt_device_get_raw_irq(const struct dt_device_node *device,
- unsigned int index,
- struct dt_raw_irq *out_irq)
-{
- const struct dt_device_node *p;
- const __be32 *intspec, *tmp, *addr;
- u32 intsize, intlen;
- int res = -EINVAL;
- struct dt_phandle_args args;
- int i;
-
- dt_dprintk("dt_device_get_raw_irq: dev=%s, index=%u\n",
- device->full_name, index);
-
- /* Get the reg property (if any) */
- addr = dt_get_property(device, "reg", NULL);
-
- /* Try the new-style interrupts-extended first */
- res = dt_parse_phandle_with_args(device, "interrupts-extended",
- "#interrupt-cells", index, &args);
- if ( !res )
- {
- dt_dprintk(" using 'interrupts-extended' property\n");
- dt_dprintk(" intspec=%d intsize=%d\n", args.args[0], args.args_count);
-
- for ( i = 0; i < args.args_count; i++ )
- args.args[i] = cpu_to_be32(args.args[i]);
-
- return dt_irq_map_raw(args.np, args.args, args.args_count,
- addr, out_irq);
- }
-
- /* Get the interrupts property */
- intspec = dt_get_property(device, "interrupts", &intlen);
- if ( intspec == NULL )
- return -EINVAL;
- intlen /= sizeof(*intspec);
-
- dt_dprintk(" using 'interrupts' property\n");
- dt_dprintk(" intspec=%d intlen=%d\n", be32_to_cpup(intspec), intlen);
-
- /* Look for the interrupt parent. */
- p = dt_irq_find_parent(device);
- if ( p == NULL )
- return -EINVAL;
-
- /* Get size of interrupt specifier */
- tmp = dt_get_property(p, "#interrupt-cells", NULL);
- if ( tmp == NULL )
- goto out;
- intsize = be32_to_cpu(*tmp);
-
- dt_dprintk(" intsize=%d intlen=%d\n", intsize, intlen);
-
- /* Check index */
- if ( (index + 1) * intsize > intlen )
- goto out;
-
- /* Get new specifier and map it */
- res = dt_irq_map_raw(p, intspec + index * intsize, intsize,
- addr, out_irq);
- if ( res )
- goto out;
-out:
- return res;
-}
-
-int dt_irq_translate(const struct dt_raw_irq *raw,
- struct dt_irq *out_irq)
-{
- ASSERT(dt_irq_xlate != NULL);
- ASSERT(dt_interrupt_controller != NULL);
-
- /*
- * TODO: Retrieve the right irq_xlate. This is only works for the primary
- * interrupt controller.
- */
- if ( raw->controller != dt_interrupt_controller )
- return -EINVAL;
-
- return dt_irq_xlate(raw->specifier, raw->size,
- &out_irq->irq, &out_irq->type);
-}
-
-int dt_device_get_irq(const struct dt_device_node *device, unsigned int index,
- struct dt_irq *out_irq)
-{
- struct dt_raw_irq raw;
- int res;
-
- res = dt_device_get_raw_irq(device, index, &raw);
-
- if ( res )
- return res;
-
- return dt_irq_translate(&raw, out_irq);
-}
-
-bool dt_device_is_available(const struct dt_device_node *device)
-{
- const char *status;
- u32 statlen;
-
- status = dt_get_property(device, "status", &statlen);
- if ( status == NULL )
- return 1;
-
- if ( statlen > 0 )
- {
- if ( !strcmp(status, "okay") || !strcmp(status, "ok") )
- return 1;
- }
-
- return 0;
-}
-
-bool dt_device_for_passthrough(const struct dt_device_node *device)
-{
- return (dt_find_property(device, "xen,passthrough", NULL) != NULL);
-
-}
-
-static int __dt_parse_phandle_with_args(const struct dt_device_node *np,
- const char *list_name,
- const char *cells_name,
- int cell_count, int index,
- struct dt_phandle_args *out_args)
-{
- const __be32 *list, *list_end;
- int rc = 0, cur_index = 0;
- u32 size, count = 0;
- struct dt_device_node *node = NULL;
- dt_phandle phandle;
-
- /* Retrieve the phandle list property */
- list = dt_get_property(np, list_name, &size);
- if ( !list )
- return -ENOENT;
- list_end = list + size / sizeof(*list);
-
- /* Loop over the phandles until all the requested entry is found */
- while ( list < list_end )
- {
- rc = -EINVAL;
- count = 0;
-
- /*
- * If phandle is 0, then it is an empty entry with no
- * arguments. Skip forward to the next entry.
- * */
- phandle = be32_to_cpup(list++);
- if ( phandle )
- {
- /*
- * Find the provider node and parse the #*-cells
- * property to determine the argument length.
- *
- * This is not needed if the cell count is hard-coded
- * (i.e. cells_name not set, but cell_count is set),
- * except when we're going to return the found node
- * below.
- */
- if ( cells_name || cur_index == index )
- {
- node = dt_find_node_by_phandle(phandle);
- if ( !node )
- {
- printk(XENLOG_ERR "%s: could not find phandle\n",
- np->full_name);
- goto err;
- }
- }
-
- if ( cells_name )
- {
- if ( !dt_property_read_u32(node, cells_name, &count) )
- {
- printk("%s: could not get %s for %s\n",
- np->full_name, cells_name, node->full_name);
- goto err;
- }
- }
- else
- count = cell_count;
-
- /*
- * Make sure that the arguments actually fit in the
- * remaining property data length
- */
- if ( list + count > list_end )
- {
- printk(XENLOG_ERR "%s: arguments longer than property\n",
- np->full_name);
- goto err;
- }
- }
-
- /*
- * All of the error cases above bail out of the loop, so at
- * this point, the parsing is successful. If the requested
- * index matches, then fill the out_args structure and return,
- * or return -ENOENT for an empty entry.
- */
- rc = -ENOENT;
- if ( cur_index == index )
- {
- if (!phandle)
- goto err;
-
- if ( out_args )
- {
- int i;
-
- WARN_ON(count > MAX_PHANDLE_ARGS);
- if (count > MAX_PHANDLE_ARGS)
- count = MAX_PHANDLE_ARGS;
- out_args->np = node;
- out_args->args_count = count;
- for ( i = 0; i < count; i++ )
- out_args->args[i] = be32_to_cpup(list++);
- }
-
- /* Found it! return success */
- return 0;
- }
-
- node = NULL;
- list += count;
- cur_index++;
- }
-
- /*
- * Returning result will be one of:
- * -ENOENT : index is for empty phandle
- * -EINVAL : parsing error on data
- * [1..n] : Number of phandle (count mode; when index = -1)
- */
- rc = index < 0 ? cur_index : -ENOENT;
-err:
- return rc;
-}
-
-struct dt_device_node *dt_parse_phandle(const struct dt_device_node *np,
- const char *phandle_name, int index)
-{
- struct dt_phandle_args args;
-
- if (index < 0)
- return NULL;
-
- if (__dt_parse_phandle_with_args(np, phandle_name, NULL, 0,
- index, &args))
- return NULL;
-
- return args.np;
-}
-
-
-int dt_parse_phandle_with_args(const struct dt_device_node *np,
- const char *list_name,
- const char *cells_name, int index,
- struct dt_phandle_args *out_args)
-{
- if ( index < 0 )
- return -EINVAL;
- return __dt_parse_phandle_with_args(np, list_name, cells_name, 0,
- index, out_args);
-}
-
-int dt_count_phandle_with_args(const struct dt_device_node *np,
- const char *list_name,
- const char *cells_name)
-{
- return __dt_parse_phandle_with_args(np, list_name, cells_name, 0, -1, NULL);
-}
-
-/**
- * unflatten_dt_node - Alloc and populate a device_node from the flat tree
- * @fdt: The parent device tree blob
- * @mem: Memory chunk to use for allocating device nodes and properties
- * @p: pointer to node in flat tree
- * @dad: Parent struct device_node
- * @allnextpp: pointer to ->allnext from last allocated device_node
- * @fpsize: Size of the node path up at the current depth.
- */
-static unsigned long unflatten_dt_node(const void *fdt,
- unsigned long mem,
- unsigned long *p,
- struct dt_device_node *dad,
- struct dt_device_node ***allnextpp,
- unsigned long fpsize)
-{
- struct dt_device_node *np;
- struct dt_property *pp, **prev_pp = NULL;
- char *pathp;
- u32 tag;
- unsigned int l, allocl;
- int has_name = 0;
- int new_format = 0;
-
- tag = be32_to_cpup((__be32 *)(*p));
- if ( tag != FDT_BEGIN_NODE )
- {
- printk(XENLOG_WARNING "Weird tag at start of node: %x\n", tag);
- return mem;
- }
- *p += 4;
- pathp = (char *)*p;
- l = allocl = strlen(pathp) + 1;
- *p = ROUNDUP(*p + l, 4);
-
- /* version 0x10 has a more compact unit name here instead of the full
- * path. we accumulate the full path size using "fpsize", we'll rebuild
- * it later. We detect this because the first character of the name is
- * not '/'.
- */
- if ( (*pathp) != '/' )
- {
- new_format = 1;
- if ( fpsize == 0 )
- {
- /* root node: special case. fpsize accounts for path
- * plus terminating zero. root node only has '/', so
- * fpsize should be 2, but we want to avoid the first
- * level nodes to have two '/' so we use fpsize 1 here
- */
- fpsize = 1;
- allocl = 2;
- }
- else
- {
- /* account for '/' and path size minus terminal 0
- * already in 'l'
- */
- fpsize += l;
- allocl = fpsize;
- }
- }
-
- np = unflatten_dt_alloc(&mem, sizeof(struct dt_device_node) + allocl,
- __alignof__(struct dt_device_node));
- if ( allnextpp )
- {
- memset(np, 0, sizeof(*np));
- np->full_name = ((char *)np) + sizeof(struct dt_device_node);
- /* By default dom0 owns the device */
- np->used_by = 0;
- /* By default the device is not protected */
- np->is_protected = false;
- INIT_LIST_HEAD(&np->domain_list);
-
- if ( new_format )
- {
- char *fn = np->full_name;
- /* rebuild full path for new format */
- if ( dad && dad->parent )
- {
- strlcpy(fn, dad->full_name, allocl);
-#ifdef DEBUG_DT
- if ( (strlen(fn) + l + 1) != allocl )
- {
- dt_dprintk("%s: p: %d, l: %d, a: %d\n",
- pathp, (int)strlen(fn),
- l, allocl);
- }
-#endif
- fn += strlen(fn);
- }
- *(fn++) = '/';
- memcpy(fn, pathp, l);
- }
- else
- memcpy(np->full_name, pathp, l);
- prev_pp = &np->properties;
- **allnextpp = np;
- *allnextpp = &np->allnext;
- if ( dad != NULL )
- {
- np->parent = dad;
- /* we temporarily use the next field as `last_child'*/
- if ( dad->next == NULL )
- dad->child = np;
- else
- dad->next->sibling = np;
- dad->next = np;
- }
- }
- /* process properties */
- while ( 1 )
- {
- u32 sz, noff;
- const char *pname;
-
- tag = be32_to_cpup((__be32 *)(*p));
- if ( tag == FDT_NOP )
- {
- *p += 4;
- continue;
- }
- if ( tag != FDT_PROP )
- break;
- *p += 4;
- sz = be32_to_cpup((__be32 *)(*p));
- noff = be32_to_cpup((__be32 *)((*p) + 4));
- *p += 8;
- if ( fdt_version(fdt) < 0x10 )
- *p = ROUNDUP(*p, sz >= 8 ? 8 : 4);
-
- pname = fdt_string(fdt, noff);
- if ( pname == NULL )
- {
- dt_dprintk("Can't find property name in list!\n");
- break;
- }
- if ( strcmp(pname, "name") == 0 )
- has_name = 1;
- l = strlen(pname) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct dt_property),
- __alignof__(struct dt_property));
- if ( allnextpp )
- {
- /* We accept flattened tree phandles either in
- * ePAPR-style "phandle" properties, or the
- * legacy "linux,phandle" properties. If both
- * appear and have different values, things
- * will get weird. Don't do that. */
- if ( (strcmp(pname, "phandle") == 0) ||
- (strcmp(pname, "linux,phandle") == 0) )
- {
- if ( np->phandle == 0 )
- np->phandle = be32_to_cpup((__be32*)*p);
- }
- /* And we process the "ibm,phandle" property
- * used in pSeries dynamic device tree
- * stuff */
- if ( strcmp(pname, "ibm,phandle") == 0 )
- np->phandle = be32_to_cpup((__be32 *)*p);
- pp->name = pname;
- pp->length = sz;
- pp->value = (void *)*p;
- *prev_pp = pp;
- prev_pp = &pp->next;
- }
- *p = ROUNDUP((*p) + sz, 4);
- }
- /* with version 0x10 we may not have the name property, recreate
- * it here from the unit name if absent
- */
- if ( !has_name )
- {
- char *p1 = pathp, *ps = pathp, *pa = NULL;
- int sz;
-
- while ( *p1 )
- {
- if ( (*p1) == '@' )
- pa = p1;
- if ( (*p1) == '/' )
- ps = p1 + 1;
- p1++;
- }
- if ( pa < ps )
- pa = p1;
- sz = (pa - ps) + 1;
- pp = unflatten_dt_alloc(&mem, sizeof(struct dt_property) + sz,
- __alignof__(struct dt_property));
- if ( allnextpp )
- {
- pp->name = "name";
- pp->length = sz;
- pp->value = pp + 1;
- /*
- * The device tree creation code assume that the property
- * "name" is not a fake.
- * To avoid a big divergence with Linux code, only remove
- * property link. In this case we will lose a bit of memory
- */
-#if 0
- *prev_pp = pp;
- prev_pp = &pp->next;
-#endif
- np->name = pp->value;
- memcpy(pp->value, ps, sz - 1);
- ((char *)pp->value)[sz - 1] = 0;
- dt_dprintk("fixed up name for %s -> %s\n", pathp,
- (char *)pp->value);
- /* Generic device initialization */
- np->dev.type = DEV_DT;
- np->dev.of_node = np;
- }
- }
- if ( allnextpp )
- {
- *prev_pp = NULL;
- np->name = (np->name) ? : dt_get_property(np, "name", NULL);
- np->type = dt_get_property(np, "device_type", NULL);
-
- if ( !np->name )
- np->name = "<NULL>";
- if ( !np->type )
- np->type = "<NULL>";
- }
- while ( tag == FDT_BEGIN_NODE || tag == FDT_NOP )
- {
- if ( tag == FDT_NOP )
- *p += 4;
- else
- mem = unflatten_dt_node(fdt, mem, p, np, allnextpp, fpsize);
- tag = be32_to_cpup((__be32 *)(*p));
- }
- if ( tag != FDT_END_NODE )
- {
- printk(XENLOG_WARNING "Weird tag at end of node: %x\n", tag);
- return mem;
- }
-
- *p += 4;
- return mem;
-}
-
-int unflatten_device_tree(const void *fdt, struct dt_device_node **mynodes)
-{
- unsigned long start, mem, size;
- struct dt_device_node **allnextp = mynodes;
-
- dt_dprintk(" -> unflatten_device_tree()\n");
-
- dt_dprintk("Unflattening device tree:\n");
- dt_dprintk("magic: %#08x\n", fdt_magic(fdt));
- dt_dprintk("size: %#08x\n", fdt_totalsize(fdt));
- dt_dprintk("version: %#08x\n", fdt_version(fdt));
-
- /* First pass, scan for size */
- start = ((unsigned long)fdt) + fdt_off_dt_struct(fdt);
- size = unflatten_dt_node(fdt, 0, &start, NULL, NULL, 0);
- if ( !size )
- return -EINVAL;
-
- size = (size | 3) + 1;
-
- dt_dprintk(" size is %#lx allocating...\n", size);
-
- /* Allocate memory for the expanded device tree */
- mem = (unsigned long)_xmalloc (size + 4, __alignof__(struct dt_device_node));
- if ( !mem )
- return -ENOMEM;
-
- ((__be32 *)mem)[size / 4] = cpu_to_be32(0xdeadbeefU);
-
- dt_dprintk(" unflattening %lx...\n", mem);
-
- /* Second pass, do actual unflattening */
- start = ((unsigned long)fdt) + fdt_off_dt_struct(fdt);
- unflatten_dt_node(fdt, mem, &start, NULL, &allnextp, 0);
- if ( be32_to_cpup((__be32 *)start) != FDT_END )
- {
- printk(XENLOG_ERR "Weird tag at end of tree: %08x\n",
- *((u32 *)start));
- xfree((void *)mem);
- return -EINVAL;
- }
-
- if ( be32_to_cpu(((__be32 *)mem)[size / 4]) != 0xdeadbeefU )
- {
- printk(XENLOG_ERR "End of tree marker overwritten: %08x\n",
- be32_to_cpu(((__be32 *)mem)[size / 4]));
- xfree((void *)mem);
- return -EINVAL;
- }
-
- *allnextp = NULL;
-
- dt_dprintk(" <- unflatten_device_tree()\n");
-
- return 0;
-}
-
-static void dt_alias_add(struct dt_alias_prop *ap,
- struct dt_device_node *np,
- int id, const char *stem, int stem_len)
-{
- ap->np = np;
- ap->id = id;
- strlcpy(ap->stem, stem, stem_len + 1);
- list_add_tail(&ap->link, &aliases_lookup);
- dt_dprintk("adding DT alias:%s: stem=%s id=%d node=%s\n",
- ap->alias, ap->stem, ap->id, dt_node_full_name(np));
-}
-
-/**
- * dt_alias_scan - Scan all properties of 'aliases' node
- *
- * The function scans all the properties of 'aliases' node and populate
- * the the global lookup table with the properties. It returns the
- * number of alias_prop found, or error code in error case.
- */
-static void __init dt_alias_scan(void)
-{
- const struct dt_property *pp;
- const struct dt_device_node *aliases;
-
- aliases = dt_find_node_by_path("/aliases");
- if ( !aliases )
- return;
-
- dt_for_each_property_node( aliases, pp )
- {
- const char *start = pp->name;
- const char *end = start + strlen(start);
- struct dt_device_node *np;
- struct dt_alias_prop *ap;
- int id, len;
-
- /* Skip those we do not want to proceed */
- if ( !strcmp(pp->name, "name") ||
- !strcmp(pp->name, "phandle") ||
- !strcmp(pp->name, "linux,phandle") )
- continue;
-
- np = dt_find_node_by_path(pp->value);
- if ( !np )
- continue;
-
- /* walk the alias backwards to extract the id and work out
- * the 'stem' string */
- while ( isdigit(*(end-1)) && end > start )
- end--;
- len = end - start;
-
- id = simple_strtoll(end, NULL, 10);
-
- /* Allocate an alias_prop with enough space for the stem */
- ap = _xmalloc(sizeof(*ap) + len + 1, 4);
- if ( !ap )
- continue;
- ap->alias = start;
- dt_alias_add(ap, np, id, start, len);
- }
-}
-
-struct dt_device_node * __init
-dt_find_interrupt_controller(const struct dt_device_match *matches)
-{
- struct dt_device_node *np = NULL;
-
- while ( (np = dt_find_matching_node(np, matches)) )
- {
- if ( !dt_find_property(np, "interrupt-controller", NULL) )
- continue;
-
- if ( dt_get_parent(np) )
- break;
- }
-
- return np;
-}
-
-void __init dt_unflatten_host_device_tree(void)
-{
- int error = unflatten_device_tree(device_tree_flattened, &dt_host);
-
- if ( error )
- panic("unflatten_device_tree failed with error %d\n", error);
-
- dt_alias_scan();
-}
-
-int dt_get_pci_domain_nr(struct dt_device_node *node)
-{
- u32 domain;
- int error;
-
- error = dt_property_read_u32(node, "linux,pci-domain", &domain);
- if ( !error )
- return -EINVAL;
-
- return (u16)domain;
-}
-
-/*
- * Local variables:
- * mode: C
- * c-file-style: "BSD"
- * c-basic-offset: 4
- * indent-tabs-mode: nil
- * End:
- */
new file mode 100644
@@ -0,0 +1,195 @@
+#ifndef XEN_BOOTFDT_H
+#define XEN_BOOTFDT_H
+
+#include <xen/types.h>
+#include <xen/kernel.h>
+#include <xen/macros.h>
+
+#define MIN_FDT_ALIGN 8
+
+#define NR_MEM_BANKS 256
+#define NR_SHMEM_BANKS 32
+
+#define MAX_MODULES 32 /* Current maximum useful modules */
+
+typedef enum {
+ BOOTMOD_XEN,
+ BOOTMOD_FDT,
+ BOOTMOD_KERNEL,
+ BOOTMOD_RAMDISK,
+ BOOTMOD_XSM,
+ BOOTMOD_GUEST_DTB,
+ BOOTMOD_UNKNOWN
+} bootmodule_kind;
+
+enum membank_type {
+ /*
+ * The MEMBANK_DEFAULT type refers to either reserved memory for the
+ * device/firmware (when the bank is in 'reserved_mem') or any RAM (when
+ * the bank is in 'mem').
+ */
+ MEMBANK_DEFAULT,
+ /*
+ * The MEMBANK_STATIC_DOMAIN type is used to indicate whether the memory
+ * bank is bound to a static Xen domain. It is only valid when the bank
+ * is in reserved_mem.
+ */
+ MEMBANK_STATIC_DOMAIN,
+ /*
+ * The MEMBANK_STATIC_HEAP type is used to indicate whether the memory
+ * bank is reserved as static heap. It is only valid when the bank is
+ * in reserved_mem.
+ */
+ MEMBANK_STATIC_HEAP,
+ /*
+ * The MEMBANK_FDT_RESVMEM type is used to indicate whether the memory
+ * bank is from the FDT reserve map.
+ */
+ MEMBANK_FDT_RESVMEM,
+};
+
+/* Indicates the maximum number of characters(\0 included) for shm_id */
+#define MAX_SHM_ID_LENGTH 16
+
+struct shmem_membank_extra {
+ char shm_id[MAX_SHM_ID_LENGTH];
+ unsigned int nr_shm_borrowers;
+};
+
+struct membank {
+ paddr_t start;
+ paddr_t size;
+ union {
+ enum membank_type type;
+#ifdef CONFIG_STATIC_SHM
+ struct shmem_membank_extra *shmem_extra;
+#endif
+ };
+};
+
+struct membanks {
+ __struct_group(membanks_hdr, common, ,
+ unsigned int nr_banks;
+ unsigned int max_banks;
+ );
+ struct membank bank[];
+};
+
+struct meminfo {
+ struct membanks_hdr common;
+ struct membank bank[NR_MEM_BANKS];
+};
+
+struct shared_meminfo {
+ struct membanks_hdr common;
+ struct membank bank[NR_SHMEM_BANKS];
+ struct shmem_membank_extra extra[NR_SHMEM_BANKS];
+};
+
+/*
+ * The domU flag is set for kernels and ramdisks of "xen,domain" nodes.
+ * The purpose of the domU flag is to avoid getting confused in
+ * kernel_probe, where we try to guess which is the dom0 kernel and
+ * initrd to be compatible with all versions of the multiboot spec.
+ */
+#define BOOTMOD_MAX_CMDLINE 1024
+struct bootmodule {
+ bootmodule_kind kind;
+ bool domU;
+ paddr_t start;
+ paddr_t size;
+};
+
+/* DT_MAX_NAME is the node name max length according the DT spec */
+#define DT_MAX_NAME 41
+struct bootcmdline {
+ bootmodule_kind kind;
+ bool domU;
+ paddr_t start;
+ char dt_name[DT_MAX_NAME];
+ char cmdline[BOOTMOD_MAX_CMDLINE];
+};
+
+struct bootmodules {
+ int nr_mods;
+ struct bootmodule module[MAX_MODULES];
+};
+
+struct bootcmdlines {
+ unsigned int nr_mods;
+ struct bootcmdline cmdline[MAX_MODULES];
+};
+
+struct bootinfo {
+ struct meminfo mem;
+ /* The reserved regions are only used when booting using Device-Tree */
+ struct meminfo reserved_mem;
+ struct bootmodules modules;
+ struct bootcmdlines cmdlines;
+#ifdef CONFIG_ACPI
+ struct meminfo acpi;
+#endif
+#ifdef CONFIG_STATIC_SHM
+ struct shared_meminfo shmem;
+#endif
+ bool static_heap;
+};
+
+#ifdef CONFIG_ACPI
+#define BOOTINFO_ACPI_INIT .acpi.common.max_banks = NR_MEM_BANKS,
+#else
+#define BOOTINFO_ACPI_INIT
+#endif
+
+#ifdef CONFIG_STATIC_SHM
+#define BOOTINFO_SHMEM_INIT .shmem.common.max_banks = NR_SHMEM_BANKS,
+#else
+#define BOOTINFO_SHMEM_INIT
+#endif
+
+#define BOOTINFO_INIT \
+{ \
+ .mem.common.max_banks = NR_MEM_BANKS, \
+ .reserved_mem.common.max_banks = NR_MEM_BANKS, \
+ BOOTINFO_ACPI_INIT \
+ BOOTINFO_SHMEM_INIT \
+}
+
+extern struct bootinfo bootinfo;
+
+void populate_boot_allocator(void);
+
+size_t boot_fdt_info(const void *fdt, paddr_t paddr);
+
+const char *boot_fdt_cmdline(const void *fdt);
+
+static inline struct membanks *bootinfo_get_reserved_mem(void)
+{
+ return container_of(&bootinfo.reserved_mem.common, struct membanks, common);
+}
+
+static inline struct membanks *bootinfo_get_mem(void)
+{
+ return container_of(&bootinfo.mem.common, struct membanks, common);
+}
+
+#ifdef CONFIG_ACPI
+static inline struct membanks *bootinfo_get_acpi(void)
+{
+ return container_of(&bootinfo.acpi.common, struct membanks, common);
+}
+#endif
+
+#ifdef CONFIG_STATIC_SHM
+static inline struct membanks *bootinfo_get_shmem(void)
+{
+ return container_of(&bootinfo.shmem.common, struct membanks, common);
+}
+
+static inline struct shmem_membank_extra *bootinfo_get_shmem_extra(void)
+{
+ return bootinfo.shmem.extra;
+}
+#endif
+
+#endif /* XEN_BOOTFDT_H */