| Message ID | 20240806050639.1013152-1-xu.yang_2@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v2,1/5] dt-bindings: phy: imx8mq-usb: add compatible "fsl,imx95-usb-phy" | expand |
On 06/08/2024 07:06, Xu Yang wrote: > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > block. Since i.MX95 usb phy is able to switch SS lanes, this will also > add orientation-switch and port property to the file. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > --- > Changes in v2: > - replace minItems with description in reg property > - remove orientation-switch and port > - refer to usb-switch.yaml > - use unevaluatedProperties > --- > .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- > 1 file changed, 37 insertions(+), 5 deletions(-) > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > index dc3a3f709fea..6d6d211883ae 100644 > --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > @@ -11,12 +11,17 @@ maintainers: > > properties: > compatible: > - enum: > - - fsl,imx8mq-usb-phy > - - fsl,imx8mp-usb-phy > + oneOf: > + - enum: > + - fsl,imx8mq-usb-phy > + - fsl,imx8mp-usb-phy > + - items: > + - const: fsl,imx95-usb-phy > + - const: fsl,imx8mp-usb-phy > > reg: > - maxItems: 1 > + minItems: 1 > + maxItems: 2 > > "#phy-cells": > const: 0 > @@ -89,7 +94,34 @@ required: > - clocks > - clock-names > > -additionalProperties: false > +allOf: > + - if: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx95-usb-phy > + then: > + properties: > + reg: > + items: > + - description: USB PHY Control range > + - description: USB PHY TCA Block range > + else: > + properties: > + reg: > + maxItems: 1 > + > + - if: > + properties: > + compatible: > + contains: > + enum: > + - fsl,imx95-usb-phy > + then: > + $ref: /schemas/usb/usb-switch.yaml# ref should be rather in top-level. You can always disallow certain properties for devices, if they are really not applicable. Best regards, Krzysztof
On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: > On 06/08/2024 07:06, Xu Yang wrote: > > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > > block. Since i.MX95 usb phy is able to switch SS lanes, this will also > > add orientation-switch and port property to the file. > > > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > --- > > Changes in v2: > > - replace minItems with description in reg property > > - remove orientation-switch and port > > - refer to usb-switch.yaml > > - use unevaluatedProperties > > --- > > .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- > > 1 file changed, 37 insertions(+), 5 deletions(-) > > > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > index dc3a3f709fea..6d6d211883ae 100644 > > --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > @@ -11,12 +11,17 @@ maintainers: > > > > properties: > > compatible: > > - enum: > > - - fsl,imx8mq-usb-phy > > - - fsl,imx8mp-usb-phy > > + oneOf: > > + - enum: > > + - fsl,imx8mq-usb-phy > > + - fsl,imx8mp-usb-phy > > + - items: > > + - const: fsl,imx95-usb-phy > > + - const: fsl,imx8mp-usb-phy > > > > reg: > > - maxItems: 1 > > + minItems: 1 > > + maxItems: 2 > > > > "#phy-cells": > > const: 0 > > @@ -89,7 +94,34 @@ required: > > - clocks > > - clock-names > > > > -additionalProperties: false > > +allOf: > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - fsl,imx95-usb-phy > > + then: > > + properties: > > + reg: > > + items: > > + - description: USB PHY Control range > > + - description: USB PHY TCA Block range > > + else: > > + properties: > > + reg: > > + maxItems: 1 > > + > > + - if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - fsl,imx95-usb-phy > > + then: > > + $ref: /schemas/usb/usb-switch.yaml# > > ref should be rather in top-level. You can always disallow certain > properties for devices, if they are really not applicable. There are some "required" in usb-switch.yaml, oneOf: - required: - port - required: - ports If put on the top, it may cause DTB check warning for other compatible strings, which have not support usb-switch. Frank > > Best regards, > Krzysztof >
On Tue, Aug 06, 2024 at 12:11:55PM -0400, Frank Li wrote: > On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: > > On 06/08/2024 07:06, Xu Yang wrote: > > > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > > > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > > > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > > > block. Since i.MX95 usb phy is able to switch SS lanes, this will also > > > add orientation-switch and port property to the file. > > > > > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > > > > > > --- > > > Changes in v2: > > > - replace minItems with description in reg property > > > - remove orientation-switch and port > > > - refer to usb-switch.yaml > > > - use unevaluatedProperties > > > --- > > > .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- > > > 1 file changed, 37 insertions(+), 5 deletions(-) > > > > > > diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > > index dc3a3f709fea..6d6d211883ae 100644 > > > --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > > +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > > > @@ -11,12 +11,17 @@ maintainers: > > > > > > properties: > > > compatible: > > > - enum: > > > - - fsl,imx8mq-usb-phy > > > - - fsl,imx8mp-usb-phy > > > + oneOf: > > > + - enum: > > > + - fsl,imx8mq-usb-phy > > > + - fsl,imx8mp-usb-phy > > > + - items: > > > + - const: fsl,imx95-usb-phy > > > + - const: fsl,imx8mp-usb-phy > > > > > > reg: > > > - maxItems: 1 > > > + minItems: 1 > > > + maxItems: 2 > > > > > > "#phy-cells": > > > const: 0 > > > @@ -89,7 +94,34 @@ required: > > > - clocks > > > - clock-names > > > > > > -additionalProperties: false > > > +allOf: > > > + - if: > > > + properties: > > > + compatible: > > > + contains: > > > + enum: > > > + - fsl,imx95-usb-phy > > > + then: > > > + properties: > > > + reg: > > > + items: > > > + - description: USB PHY Control range > > > + - description: USB PHY TCA Block range > > > + else: > > > + properties: > > > + reg: > > > + maxItems: 1 > > > + > > > + - if: > > > + properties: > > > + compatible: > > > + contains: > > > + enum: > > > + - fsl,imx95-usb-phy > > > + then: > > > + $ref: /schemas/usb/usb-switch.yaml# > > > > ref should be rather in top-level. You can always disallow certain > > properties for devices, if they are really not applicable. > > There are some "required" in usb-switch.yaml, > > oneOf: > - required: > - port > - required: > - ports > > If put on the top, it may cause DTB check warning for other compatible > strings, which have not support usb-switch. Yes, even though I move usb-switch to top and set false for certain properties, dtbinding check still has below error: /home/nxf75279/work/usb/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.example.dtb: phy@381f0040: 'oneOf' conditional failed, one must be fixed: 'port' is a required property 'ports' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml# Thanks, Xu Yang > > Frank > > > > Best regards, > > Krzysztof > >
On 06/08/2024 18:11, Frank Li wrote: > On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: >> On 06/08/2024 07:06, Xu Yang wrote: >>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a >>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems >>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) >>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also >>> add orientation-switch and port property to the file. >>> >>> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> >>> >>> --- >>> Changes in v2: >>> - replace minItems with description in reg property >>> - remove orientation-switch and port >>> - refer to usb-switch.yaml >>> - use unevaluatedProperties >>> --- >>> .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- >>> 1 file changed, 37 insertions(+), 5 deletions(-) >>> >>> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>> index dc3a3f709fea..6d6d211883ae 100644 >>> --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>> @@ -11,12 +11,17 @@ maintainers: >>> >>> properties: >>> compatible: >>> - enum: >>> - - fsl,imx8mq-usb-phy >>> - - fsl,imx8mp-usb-phy >>> + oneOf: >>> + - enum: >>> + - fsl,imx8mq-usb-phy >>> + - fsl,imx8mp-usb-phy >>> + - items: >>> + - const: fsl,imx95-usb-phy >>> + - const: fsl,imx8mp-usb-phy >>> >>> reg: >>> - maxItems: 1 >>> + minItems: 1 >>> + maxItems: 2 >>> >>> "#phy-cells": >>> const: 0 >>> @@ -89,7 +94,34 @@ required: >>> - clocks >>> - clock-names >>> >>> -additionalProperties: false >>> +allOf: >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - fsl,imx95-usb-phy >>> + then: >>> + properties: >>> + reg: >>> + items: >>> + - description: USB PHY Control range >>> + - description: USB PHY TCA Block range >>> + else: >>> + properties: >>> + reg: >>> + maxItems: 1 >>> + >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - fsl,imx95-usb-phy >>> + then: >>> + $ref: /schemas/usb/usb-switch.yaml# >> >> ref should be rather in top-level. You can always disallow certain >> properties for devices, if they are really not applicable. > > There are some "required" in usb-switch.yaml, > > oneOf: > - required: > - port > - required: > - ports > > If put on the top, it may cause DTB check warning for other compatible > strings, which have not support usb-switch. Hm, indeed, that's unusual case to have such different devices in one schema. Did you test that above $ref in if: actually works? Best regards, Krzysztof
On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote: > On 06/08/2024 18:11, Frank Li wrote: > > On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: > >> On 06/08/2024 07:06, Xu Yang wrote: > >>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > >>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > >>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > >>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also > >>> add orientation-switch and port property to the file. > >>> > >>> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > >>> > >>> --- > >>> Changes in v2: > >>> - replace minItems with description in reg property > >>> - remove orientation-switch and port > >>> - refer to usb-switch.yaml > >>> - use unevaluatedProperties > >>> --- > >>> .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- > >>> 1 file changed, 37 insertions(+), 5 deletions(-) > >>> > >>> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > >>> index dc3a3f709fea..6d6d211883ae 100644 > >>> --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > >>> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml > >>> @@ -11,12 +11,17 @@ maintainers: > >>> > >>> properties: > >>> compatible: > >>> - enum: > >>> - - fsl,imx8mq-usb-phy > >>> - - fsl,imx8mp-usb-phy > >>> + oneOf: > >>> + - enum: > >>> + - fsl,imx8mq-usb-phy > >>> + - fsl,imx8mp-usb-phy > >>> + - items: > >>> + - const: fsl,imx95-usb-phy > >>> + - const: fsl,imx8mp-usb-phy > >>> > >>> reg: > >>> - maxItems: 1 > >>> + minItems: 1 > >>> + maxItems: 2 > >>> > >>> "#phy-cells": > >>> const: 0 > >>> @@ -89,7 +94,34 @@ required: > >>> - clocks > >>> - clock-names > >>> > >>> -additionalProperties: false > >>> +allOf: > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + enum: > >>> + - fsl,imx95-usb-phy > >>> + then: > >>> + properties: > >>> + reg: > >>> + items: > >>> + - description: USB PHY Control range > >>> + - description: USB PHY TCA Block range > >>> + else: > >>> + properties: > >>> + reg: > >>> + maxItems: 1 > >>> + > >>> + - if: > >>> + properties: > >>> + compatible: > >>> + contains: > >>> + enum: > >>> + - fsl,imx95-usb-phy > >>> + then: > >>> + $ref: /schemas/usb/usb-switch.yaml# > >> > >> ref should be rather in top-level. You can always disallow certain > >> properties for devices, if they are really not applicable. > > > > There are some "required" in usb-switch.yaml, > > > > oneOf: > > - required: > > - port > > - required: > > - ports > > > > If put on the top, it may cause DTB check warning for other compatible > > strings, which have not support usb-switch. > > Hm, indeed, that's unusual case to have such different devices in one > schema. Did you test that above $ref in if: actually works? Yes, it works and this yaml pass dt_binding_check and dtbs_check. Thanks, Xu Yang > > Best regards, > Krzysztof >
On 07/08/2024 07:57, Xu Yang wrote: > On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote: >> On 06/08/2024 18:11, Frank Li wrote: >>> On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: >>>> On 06/08/2024 07:06, Xu Yang wrote: >>>>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a >>>>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems >>>>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) >>>>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also >>>>> add orientation-switch and port property to the file. >>>>> >>>>> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> >>>>> >>>>> --- >>>>> Changes in v2: >>>>> - replace minItems with description in reg property >>>>> - remove orientation-switch and port >>>>> - refer to usb-switch.yaml >>>>> - use unevaluatedProperties >>>>> --- >>>>> .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- >>>>> 1 file changed, 37 insertions(+), 5 deletions(-) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>>>> index dc3a3f709fea..6d6d211883ae 100644 >>>>> --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>>>> +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml >>>>> @@ -11,12 +11,17 @@ maintainers: >>>>> >>>>> properties: >>>>> compatible: >>>>> - enum: >>>>> - - fsl,imx8mq-usb-phy >>>>> - - fsl,imx8mp-usb-phy >>>>> + oneOf: >>>>> + - enum: >>>>> + - fsl,imx8mq-usb-phy >>>>> + - fsl,imx8mp-usb-phy >>>>> + - items: >>>>> + - const: fsl,imx95-usb-phy >>>>> + - const: fsl,imx8mp-usb-phy >>>>> >>>>> reg: >>>>> - maxItems: 1 >>>>> + minItems: 1 >>>>> + maxItems: 2 >>>>> >>>>> "#phy-cells": >>>>> const: 0 >>>>> @@ -89,7 +94,34 @@ required: >>>>> - clocks >>>>> - clock-names >>>>> >>>>> -additionalProperties: false >>>>> +allOf: >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - fsl,imx95-usb-phy >>>>> + then: >>>>> + properties: >>>>> + reg: >>>>> + items: >>>>> + - description: USB PHY Control range >>>>> + - description: USB PHY TCA Block range >>>>> + else: >>>>> + properties: >>>>> + reg: >>>>> + maxItems: 1 >>>>> + >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - fsl,imx95-usb-phy >>>>> + then: >>>>> + $ref: /schemas/usb/usb-switch.yaml# >>>> >>>> ref should be rather in top-level. You can always disallow certain >>>> properties for devices, if they are really not applicable. >>> >>> There are some "required" in usb-switch.yaml, >>> >>> oneOf: >>> - required: >>> - port >>> - required: >>> - ports >>> >>> If put on the top, it may cause DTB check warning for other compatible >>> strings, which have not support usb-switch. >> >> Hm, indeed, that's unusual case to have such different devices in one >> schema. Did you test that above $ref in if: actually works? > > Yes, it works and this yaml pass dt_binding_check and dtbs_check. I know it passes, I am asking whether it actually works. Is the $ref actually effective? Is it properly applied? Best regards, Krzysztof
On Wed, Aug 07, 2024 at 07:59:02AM +0200, Krzysztof Kozlowski wrote: > On 07/08/2024 07:57, Xu Yang wrote: > > On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote: > >> On 06/08/2024 18:11, Frank Li wrote: > >>> On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: > >>>> On 06/08/2024 07:06, Xu Yang wrote: > >>>>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > >>>>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > >>>>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > >>>>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also > >>>>> add orientation-switch and port property to the file. > >>>>> > >>>>> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> > >>>>> > >>>>> --- > >>>>> Changes in v2: > >>>>> - replace minItems with description in reg property > >>>>> - remove orientation-switch and port > >>>>> - refer to usb-switch.yaml > >>>>> - use unevaluatedProperties > >>>>> [...] > >>>> > >>>> ref should be rather in top-level. You can always disallow certain > >>>> properties for devices, if they are really not applicable. > >>> > >>> There are some "required" in usb-switch.yaml, > >>> > >>> oneOf: > >>> - required: > >>> - port > >>> - required: > >>> - ports > >>> > >>> If put on the top, it may cause DTB check warning for other compatible > >>> strings, which have not support usb-switch. > >> > >> Hm, indeed, that's unusual case to have such different devices in one > >> schema. Did you test that above $ref in if: actually works? > > > > Yes, it works and this yaml pass dt_binding_check and dtbs_check. > > I know it passes, I am asking whether it actually works. Is the $ref > actually effective? Is it properly applied? If imx95 usb phy node doesn't contain "orientation-switch" and "port", dtb check will show below error: usb/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: phy@4c1f0040: 'oneOf' conditional failed, one must be fixed: 'port' is a required property 'ports' is a required property from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml# Do you want other test results? Thanks, Xu Yang > > Best regards, > Krzysztof >
On 07/08/2024 09:11, Xu Yang wrote: > On Wed, Aug 07, 2024 at 07:59:02AM +0200, Krzysztof Kozlowski wrote: >> On 07/08/2024 07:57, Xu Yang wrote: >>> On Wed, Aug 07, 2024 at 07:48:43AM +0200, Krzysztof Kozlowski wrote: >>>> On 06/08/2024 18:11, Frank Li wrote: >>>>> On Tue, Aug 06, 2024 at 10:29:47AM +0200, Krzysztof Kozlowski wrote: >>>>>> On 06/08/2024 07:06, Xu Yang wrote: >>>>>>> The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a >>>>>>> compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems >>>>>>> to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) >>>>>>> block. Since i.MX95 usb phy is able to switch SS lanes, this will also >>>>>>> add orientation-switch and port property to the file. >>>>>>> >>>>>>> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> >>>>>>> >>>>>>> --- >>>>>>> Changes in v2: >>>>>>> - replace minItems with description in reg property >>>>>>> - remove orientation-switch and port >>>>>>> - refer to usb-switch.yaml >>>>>>> - use unevaluatedProperties >>>>>>> > [...] >>>>>> >>>>>> ref should be rather in top-level. You can always disallow certain >>>>>> properties for devices, if they are really not applicable. >>>>> >>>>> There are some "required" in usb-switch.yaml, >>>>> >>>>> oneOf: >>>>> - required: >>>>> - port >>>>> - required: >>>>> - ports >>>>> >>>>> If put on the top, it may cause DTB check warning for other compatible >>>>> strings, which have not support usb-switch. >>>> >>>> Hm, indeed, that's unusual case to have such different devices in one >>>> schema. Did you test that above $ref in if: actually works? >>> >>> Yes, it works and this yaml pass dt_binding_check and dtbs_check. >> >> I know it passes, I am asking whether it actually works. Is the $ref >> actually effective? Is it properly applied? > > If imx95 usb phy node doesn't contain "orientation-switch" and "port", dtb check will > show below error: > > usb/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dtb: phy@4c1f0040: 'oneOf' conditional failed, one must be fixed: > 'port' is a required property > 'ports' is a required property > from schema $id: http://devicetree.org/schemas/phy/fsl,imx8mq-usb-phy.yaml# > > Do you want other test results? Thank you for confirmation, it's enough. Best regards, Krzysztof
On 06/08/2024 07:06, Xu Yang wrote: > The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a > compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems > to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) > block. Since i.MX95 usb phy is able to switch SS lanes, this will also > add orientation-switch and port property to the file. > > Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml index dc3a3f709fea..6d6d211883ae 100644 --- a/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml +++ b/Documentation/devicetree/bindings/phy/fsl,imx8mq-usb-phy.yaml @@ -11,12 +11,17 @@ maintainers: properties: compatible: - enum: - - fsl,imx8mq-usb-phy - - fsl,imx8mp-usb-phy + oneOf: + - enum: + - fsl,imx8mq-usb-phy + - fsl,imx8mp-usb-phy + - items: + - const: fsl,imx95-usb-phy + - const: fsl,imx8mp-usb-phy reg: - maxItems: 1 + minItems: 1 + maxItems: 2 "#phy-cells": const: 0 @@ -89,7 +94,34 @@ required: - clocks - clock-names -additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-usb-phy + then: + properties: + reg: + items: + - description: USB PHY Control range + - description: USB PHY TCA Block range + else: + properties: + reg: + maxItems: 1 + + - if: + properties: + compatible: + contains: + enum: + - fsl,imx95-usb-phy + then: + $ref: /schemas/usb/usb-switch.yaml# + +unevaluatedProperties: false examples: - |
The usb phy in i.MX95 is compatible with i.MX8MP's, this will add a compatible "fsl,imx95-usb-phy" for i.MX95. Also change reg maxItems to 2 since i.MX95 needs another regmap to control Type-C Assist (TCA) block. Since i.MX95 usb phy is able to switch SS lanes, this will also add orientation-switch and port property to the file. Signed-off-by: Xu Yang <xu.yang_2@nxp.com> --- Changes in v2: - replace minItems with description in reg property - remove orientation-switch and port - refer to usb-switch.yaml - use unevaluatedProperties --- .../bindings/phy/fsl,imx8mq-usb-phy.yaml | 42 ++++++++++++++++--- 1 file changed, 37 insertions(+), 5 deletions(-)