| Message ID | 20240807104137.558741-1-frieder@fris.de (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add support for Kontron OSM-S i.MX8MP SoM and carrier boards | expand |
On Wed, 07 Aug 2024 12:38:45 +0200, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@kontron.de> > > Patch 1: board DT bindings > Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees > Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees > > Changes for v2: > > DT bindings (patch1): > * Add tags from Krzysztof and Conor (thanks!) > > SMARC DTs (patch 3): > * Fix GPIO labels > * Add support for TPM chip on SMARC module > * Disable PWM in favor of GPIO5 on SMARC carrier > * Enable LCDIF node to make HDMI work > * Add support for GPIO expanders on SMARC carrier > * Remove SPI flash as its removable and should be in an overlay > * Add CAN regulators to fix transceiver enable > > Frieder Schrempf (3): > dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards > arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier > board > arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval > carrier > > .../devicetree/bindings/arm/fsl.yaml | 13 + > arch/arm64/boot/dts/freescale/Makefile | 6 + > .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++ > .../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++ > .../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++ > .../imx8mp-kontron-smarc-eval-carrier.dts | 258 +++++ > .../dts/freescale/imx8mp-kontron-smarc.dtsi | 281 ++++++ > 7 files changed, 1885 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi > > -- > 2.45.2 > > > My bot found new DTB warnings on the .dts files added or changed in this series. Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings are fixed by another series. Ultimately, it is up to the platform maintainer whether these warnings are acceptable or not. No need to reply unless the platform maintainer has comments. If you already ran DT checks and didn't see these error(s), then make sure dt-schema is up to date: pip3 install dtschema --upgrade New warnings running 'make CHECK_DTBS=y freescale/imx8mp-kontron-bl-osm-s.dtb freescale/imx8mp-kontron-smarc-eval-carrier.dtb' for 20240807104137.558741-1-frieder@fris.de: arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dtb: /usbc: failed to match any schema with compatible: ['linux,extcon-usb-gpio'] arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dtb: /usbc: failed to match any schema with compatible: ['linux,extcon-usb-gpio']
Hi Shawn, On 07.08.24 12:38 PM, Frieder Schrempf wrote: > From: Frieder Schrempf <frieder.schrempf@kontron.de> > > Patch 1: board DT bindings > Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees > Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees > > Changes for v2: > > DT bindings (patch1): > * Add tags from Krzysztof and Conor (thanks!) > > SMARC DTs (patch 3): > * Fix GPIO labels > * Add support for TPM chip on SMARC module > * Disable PWM in favor of GPIO5 on SMARC carrier > * Enable LCDIF node to make HDMI work > * Add support for GPIO expanders on SMARC carrier > * Remove SPI flash as its removable and should be in an overlay > * Add CAN regulators to fix transceiver enable Just a gentle ping to ask if this can be reviewed and applied? Thanks Frieder
From: Frieder Schrempf <frieder.schrempf@kontron.de> Patch 1: board DT bindings Patch 2: OSM-S i.MX8MP SoM and BL carrier board devicetrees Patch 3: i.MX8MP SMARC module and eval carrier board devicetrees Changes for v2: DT bindings (patch1): * Add tags from Krzysztof and Conor (thanks!) SMARC DTs (patch 3): * Fix GPIO labels * Add support for TPM chip on SMARC module * Disable PWM in favor of GPIO5 on SMARC carrier * Enable LCDIF node to make HDMI work * Add support for GPIO expanders on SMARC carrier * Remove SPI flash as its removable and should be in an overlay * Add CAN regulators to fix transceiver enable Frieder Schrempf (3): dt-bindings: arm: fsl: Add Kontron i.MX8MP OSM-S based boards arm64: dts: Add support for Kontron OSM-S i.MX8MP SoM and BL carrier board arm64: dts: Add support for Kontron i.MX8MP SMARC module and eval carrier .../devicetree/bindings/arm/fsl.yaml | 13 + arch/arm64/boot/dts/freescale/Makefile | 6 + .../dts/freescale/imx8mp-kontron-bl-osm-s.dts | 307 ++++++ .../boot/dts/freescale/imx8mp-kontron-dl.dtso | 112 +++ .../dts/freescale/imx8mp-kontron-osm-s.dtsi | 908 ++++++++++++++++++ .../imx8mp-kontron-smarc-eval-carrier.dts | 258 +++++ .../dts/freescale/imx8mp-kontron-smarc.dtsi | 281 ++++++ 7 files changed, 1885 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-dl.dtso create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-osm-s.dtsi create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc-eval-carrier.dts create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-kontron-smarc.dtsi