| Message ID | 20240809045153.1744397-2-anisinha@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] kvm: replace fprintf with error_report() in kvm_init() for error conditions | expand |
On Fri, Aug 9, 2024 at 10:23 AM Ani Sinha <anisinha@redhat.com> wrote: > > error_report() is more appropriate for error situations. Replace fprintf with > error_report. Cosmetic. No functional change. > > CC: qemu-trivial@nongnu.org > CC: zhao1.liu@intel.com > Signed-off-by: Ani Sinha <anisinha@redhat.com> > --- > accel/kvm/kvm-all.c | 42 +++++++++++++++++++----------------------- > 1 file changed, 19 insertions(+), 23 deletions(-) > > diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c > index 75d11a07b2..899b5264e3 100644 > --- a/accel/kvm/kvm-all.c > +++ b/accel/kvm/kvm-all.c > @@ -2427,7 +2427,7 @@ static int kvm_init(MachineState *ms) > QLIST_INIT(&s->kvm_parked_vcpus); > s->fd = qemu_open_old(s->device ?: "/dev/kvm", O_RDWR); > if (s->fd == -1) { > - fprintf(stderr, "Could not access KVM kernel module: %m\n"); > + error_report("Could not access KVM kernel module: %m"); > ret = -errno; > goto err; > } > @@ -2437,13 +2437,13 @@ static int kvm_init(MachineState *ms) > if (ret >= 0) { > ret = -EINVAL; > } > - fprintf(stderr, "kvm version too old\n"); > + error_report("kvm version too old"); > goto err; > } > > if (ret > KVM_API_VERSION) { > ret = -EINVAL; > - fprintf(stderr, "kvm version not supported\n"); > + error_report("kvm version not supported"); > goto err; > } > > @@ -2488,30 +2488,26 @@ static int kvm_init(MachineState *ms) > } while (ret == -EINTR); > > if (ret < 0) { > - fprintf(stderr, "ioctl(KVM_CREATE_VM) failed: %d %s\n", -ret, > - strerror(-ret)); > + error_report("ioctl(KVM_CREATE_VM) failed: %d %s", -ret, > + strerror(-ret)); > > #ifdef TARGET_S390X > if (ret == -EINVAL) { > - fprintf(stderr, > - "Host kernel setup problem detected. Please verify:\n"); > - fprintf(stderr, "- for kernels supporting the switch_amode or" > - " user_mode parameters, whether\n"); > - fprintf(stderr, > - " user space is running in primary address space\n"); > - fprintf(stderr, > - "- for kernels supporting the vm.allocate_pgste sysctl, " > - "whether it is enabled\n"); > + error_report("Host kernel setup problem detected. Please verify:"); > + error_report("- for kernels supporting the switch_amode or" > + " user_mode parameters, whether"); > + error_report(" user space is running in primary address space"); > + error_report("- for kernels supporting the vm.allocate_pgste " > + "sysctl, whether it is enabled"); > } > #elif defined(TARGET_PPC) > if (ret == -EINVAL) { > - fprintf(stderr, > - "PPC KVM module is not loaded. Try modprobe kvm_%s.\n", > - (type == 2) ? "pr" : "hv"); > + error_report("PPC KVM module is not loaded. Try modprobe kvm_%s.", > + (type == 2) ? "pr" : "hv"); > } > #endif > - goto err; > } > + goto err; Sorry, this is a bug. I will resend. > > s->vmfd = ret; > > @@ -2526,9 +2522,9 @@ static int kvm_init(MachineState *ms) > nc->name, nc->num, soft_vcpus_limit); > > if (nc->num > hard_vcpus_limit) { > - fprintf(stderr, "Number of %s cpus requested (%d) exceeds " > - "the maximum cpus supported by KVM (%d)\n", > - nc->name, nc->num, hard_vcpus_limit); > + error_report("Number of %s cpus requested (%d) exceeds " > + "the maximum cpus supported by KVM (%d)", > + nc->name, nc->num, hard_vcpus_limit); > exit(1); > } > } > @@ -2542,8 +2538,8 @@ static int kvm_init(MachineState *ms) > } > if (missing_cap) { > ret = -EINVAL; > - fprintf(stderr, "kvm does not support %s\n%s", > - missing_cap->name, upgrade_note); > + error_report("kvm does not support %s", missing_cap->name); > + error_report("%s", upgrade_note); > goto err; > } > > -- > 2.45.2 >
diff --git a/accel/kvm/kvm-all.c b/accel/kvm/kvm-all.c index 75d11a07b2..899b5264e3 100644 --- a/accel/kvm/kvm-all.c +++ b/accel/kvm/kvm-all.c @@ -2427,7 +2427,7 @@ static int kvm_init(MachineState *ms) QLIST_INIT(&s->kvm_parked_vcpus); s->fd = qemu_open_old(s->device ?: "/dev/kvm", O_RDWR); if (s->fd == -1) { - fprintf(stderr, "Could not access KVM kernel module: %m\n"); + error_report("Could not access KVM kernel module: %m"); ret = -errno; goto err; } @@ -2437,13 +2437,13 @@ static int kvm_init(MachineState *ms) if (ret >= 0) { ret = -EINVAL; } - fprintf(stderr, "kvm version too old\n"); + error_report("kvm version too old"); goto err; } if (ret > KVM_API_VERSION) { ret = -EINVAL; - fprintf(stderr, "kvm version not supported\n"); + error_report("kvm version not supported"); goto err; } @@ -2488,30 +2488,26 @@ static int kvm_init(MachineState *ms) } while (ret == -EINTR); if (ret < 0) { - fprintf(stderr, "ioctl(KVM_CREATE_VM) failed: %d %s\n", -ret, - strerror(-ret)); + error_report("ioctl(KVM_CREATE_VM) failed: %d %s", -ret, + strerror(-ret)); #ifdef TARGET_S390X if (ret == -EINVAL) { - fprintf(stderr, - "Host kernel setup problem detected. Please verify:\n"); - fprintf(stderr, "- for kernels supporting the switch_amode or" - " user_mode parameters, whether\n"); - fprintf(stderr, - " user space is running in primary address space\n"); - fprintf(stderr, - "- for kernels supporting the vm.allocate_pgste sysctl, " - "whether it is enabled\n"); + error_report("Host kernel setup problem detected. Please verify:"); + error_report("- for kernels supporting the switch_amode or" + " user_mode parameters, whether"); + error_report(" user space is running in primary address space"); + error_report("- for kernels supporting the vm.allocate_pgste " + "sysctl, whether it is enabled"); } #elif defined(TARGET_PPC) if (ret == -EINVAL) { - fprintf(stderr, - "PPC KVM module is not loaded. Try modprobe kvm_%s.\n", - (type == 2) ? "pr" : "hv"); + error_report("PPC KVM module is not loaded. Try modprobe kvm_%s.", + (type == 2) ? "pr" : "hv"); } #endif - goto err; } + goto err; s->vmfd = ret; @@ -2526,9 +2522,9 @@ static int kvm_init(MachineState *ms) nc->name, nc->num, soft_vcpus_limit); if (nc->num > hard_vcpus_limit) { - fprintf(stderr, "Number of %s cpus requested (%d) exceeds " - "the maximum cpus supported by KVM (%d)\n", - nc->name, nc->num, hard_vcpus_limit); + error_report("Number of %s cpus requested (%d) exceeds " + "the maximum cpus supported by KVM (%d)", + nc->name, nc->num, hard_vcpus_limit); exit(1); } } @@ -2542,8 +2538,8 @@ static int kvm_init(MachineState *ms) } if (missing_cap) { ret = -EINVAL; - fprintf(stderr, "kvm does not support %s\n%s", - missing_cap->name, upgrade_note); + error_report("kvm does not support %s", missing_cap->name); + error_report("%s", upgrade_note); goto err; }
error_report() is more appropriate for error situations. Replace fprintf with error_report. Cosmetic. No functional change. CC: qemu-trivial@nongnu.org CC: zhao1.liu@intel.com Signed-off-by: Ani Sinha <anisinha@redhat.com> --- accel/kvm/kvm-all.c | 42 +++++++++++++++++++----------------------- 1 file changed, 19 insertions(+), 23 deletions(-)