@@ -101,6 +101,37 @@ example, if Rx packets are 10 and Netdev (software statistics) displays
rx_bytes as "X", then ethtool (hardware statistics) will display rx_bytes as
"X+40" (4 bytes CRC x 10 packets).
+ethtool reset
+-------------
+The driver supports 3 types of resets:
+
+- PF reset - resets only components associated with the given PF, does not
+ impact other PFs
+
+- CORE reset - whole adapter is affected, reset all PFs
+
+- GLOBAL reset - same as CORE but mac and phy components are also reinitialized
+
+These are mapped to ethtool reset flags as follow:
+
+- PF reset:
+
+ # ethtool --reset <ethX> irq dma filter offload
+
+- CORE reset:
+
+ # ethtool --reset <ethX> irq-shared dma-shared filter-shared offload-shared \
+ ram-shared
+
+- GLOBAL reset:
+
+ # ethtool --reset <ethX> irq-shared dma-shared filter-shared offload-shared \
+ mac-shared phy-shared ram-shared
+
+In switchdev mode you can reset a VF using port representor:
+
+ # ethtool --reset <repr> irq dma filter offload
+
Viewing Link Messages
---------------------
@@ -4718,6 +4718,81 @@ static void ice_get_fec_stats(struct net_device *netdev,
pi->lport, err);
}
+#define ICE_ETHTOOL_PFR (ETH_RESET_IRQ | ETH_RESET_DMA | \
+ ETH_RESET_FILTER | ETH_RESET_OFFLOAD)
+
+#define ICE_ETHTOOL_CORER ((ICE_ETHTOOL_PFR | ETH_RESET_RAM) << \
+ ETH_RESET_SHARED_SHIFT)
+
+#define ICE_ETHTOOL_GLOBR (ICE_ETHTOOL_CORER | \
+ (ETH_RESET_MAC << ETH_RESET_SHARED_SHIFT) | \
+ (ETH_RESET_PHY << ETH_RESET_SHARED_SHIFT))
+
+#define ICE_ETHTOOL_VFR ICE_ETHTOOL_PFR
+
+/**
+ * ice_ethtool_reset - triggers a given type of reset
+ * @dev: network interface device structure
+ * @flags: set of reset flags
+ *
+ * Return: 0 on success, -EOPNOTSUPP when using unsupported set of flags.
+ */
+static int ice_ethtool_reset(struct net_device *dev, u32 *flags)
+{
+ struct ice_netdev_priv *np = netdev_priv(dev);
+ struct ice_pf *pf = np->vsi->back;
+ enum ice_reset_req reset;
+
+ switch (*flags) {
+ case ICE_ETHTOOL_CORER:
+ reset = ICE_RESET_CORER;
+ break;
+ case ICE_ETHTOOL_GLOBR:
+ reset = ICE_RESET_GLOBR;
+ break;
+ case ICE_ETHTOOL_PFR:
+ reset = ICE_RESET_PFR;
+ break;
+ default:
+ netdev_info(dev, "Unsupported set of ethtool flags");
+ return -EOPNOTSUPP;
+ }
+
+ ice_schedule_reset(pf, reset);
+
+ *flags = 0;
+
+ return 0;
+}
+
+/**
+ * ice_repr_ethtool_reset - triggers a VF reset
+ * @dev: network interface device structure
+ * @flags: set of reset flags
+ *
+ * Return: 0 on success,
+ * -EOPNOTSUPP when using unsupported set of flags
+ * -EBUSY when VF is not ready for reset.
+ */
+static int ice_repr_ethtool_reset(struct net_device *dev, u32 *flags)
+{
+ struct ice_repr *repr = ice_netdev_to_repr(dev);
+ struct ice_vf *vf;
+
+ if (repr->type != ICE_REPR_TYPE_VF ||
+ *flags != ICE_ETHTOOL_VFR)
+ return -EOPNOTSUPP;
+
+ vf = repr->vf;
+
+ if (ice_check_vf_ready_for_cfg(vf))
+ return -EBUSY;
+
+ *flags = 0;
+
+ return ice_reset_vf(vf, ICE_VF_RESET_VFLR | ICE_VF_RESET_LOCK);
+}
+
static const struct ethtool_ops ice_ethtool_ops = {
.cap_rss_ctx_supported = true,
.supported_coalesce_params = ETHTOOL_COALESCE_USECS |
@@ -4753,6 +4828,7 @@ static const struct ethtool_ops ice_ethtool_ops = {
.nway_reset = ice_nway_reset,
.get_pauseparam = ice_get_pauseparam,
.set_pauseparam = ice_set_pauseparam,
+ .reset = ice_ethtool_reset,
.get_rxfh_key_size = ice_get_rxfh_key_size,
.get_rxfh_indir_size = ice_get_rxfh_indir_size,
.get_rxfh = ice_get_rxfh,
@@ -4805,6 +4881,7 @@ static const struct ethtool_ops ice_ethtool_repr_ops = {
.get_strings = ice_repr_get_strings,
.get_ethtool_stats = ice_repr_get_ethtool_stats,
.get_sset_count = ice_repr_get_sset_count,
+ .reset = ice_repr_ethtool_reset,
};
/**
Enable ethtool reset support. Ethtool reset flags are mapped to the E810 reset type: PF reset: $ ethtool --reset <ethX> irq dma filter offload CORE reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared ram-shared GLOBAL reset: $ ethtool --reset <ethX> irq-shared dma-shared filter-shared \ offload-shared mac-shared phy-shared ram-shared Calling the same set of flags as in PF reset case on port representor triggers VF reset. Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com> --- v2: remap ethtool flags to ice resets v3: resend, add changelog, rebase, fix doc --- .../device_drivers/ethernet/intel/ice.rst | 31 ++++++++ drivers/net/ethernet/intel/ice/ice_ethtool.c | 77 +++++++++++++++++++ 2 files changed, 108 insertions(+)