diff mbox series

[v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration

Message ID 20240809082146.3496481-1-o.rempel@pengutronix.de (mailing list archive)
State New, archived
Headers show
Series [v2] arm: dts: st: stm32mp151a-prtt1l: Fix QSPI configuration | expand

Commit Message

Oleksij Rempel Aug. 9, 2024, 8:21 a.m. UTC 
Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
subnode name. The incorrect name caused the configuration to be
applied to the wrong subnode, resulting in QSPI not working properly.

To avoid this kind of regression, all references to pin configuration
nodes are now referenced directly using the format &{label/subnode}.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts  |  12 +-
 arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts  | 108 +++++++---------
 arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi | 126 +++++++++----------
 arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts  |  16 +--
 4 files changed, 116 insertions(+), 146 deletions(-)

--
2.39.2

Comments

Simon Horman Aug. 10, 2024, 9:51 a.m. UTC | #1 
On Fri, Aug 09, 2024 at 10:21:46AM +0200, Oleksij Rempel wrote:
> Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> subnode name. The incorrect name caused the configuration to be
> applied to the wrong subnode, resulting in QSPI not working properly.
> 
> To avoid this kind of regression, all references to pin configuration
> nodes are now referenced directly using the format &{label/subnode}.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Pass
Simon Horman Aug. 11, 2024, 2:41 p.m. UTC | #2 
On Sat, Aug 10, 2024 at 10:51:29AM +0100, Simon Horman wrote:
> On Fri, Aug 09, 2024 at 10:21:46AM +0200, Oleksij Rempel wrote:
> > Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> > subnode name. The incorrect name caused the configuration to be
> > applied to the wrong subnode, resulting in QSPI not working properly.
> > 
> > To avoid this kind of regression, all references to pin configuration
> > nodes are now referenced directly using the format &{label/subnode}.
> > 
> > Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
> 
> Pass

Sorry about the noise here. This was supposed to be a note to myself, that
I am not planning to review this.  It doesn't imply anything about the
patch.
Ahmad Fatoum Aug. 12, 2024, 8:55 a.m. UTC | #3 
Hi,

On 09.08.24 10:21, Oleksij Rempel wrote:
> Rename 'pins1' to 'pins' in the qspi_bk1_pins_a node to correct the
> subnode name. The incorrect name caused the configuration to be
> applied to the wrong subnode, resulting in QSPI not working properly.
> 
> To avoid this kind of regression, all references to pin configuration
> nodes are now referenced directly using the format &{label/subnode}.
> 
> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>

Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>

> +&{sdmmc1_b4_pins_a/pins2} {
> +	/delete-property/ bias-disable;

Nit: a heads-up in the commit message would've been appropriate.
Same goes for driver-push-pull, which disappeared, because it was
redundant.

> +	bias-pull-up;
>  };


Cheers,
Ahmad
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
index 75874eafde11e..8e1dd84e0c0a4 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1a.dts
@@ -28,16 +28,12 @@  phy0: ethernet-phy@0 {
 	};
 };

-&pwm5_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
-	};
+&{pwm5_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */
 };

-&pwm5_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
-	};
+&{pwm5_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* TIM5_CH1 */
 };

 &timers5 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
index c90d815f906b8..3b33b7093b686 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1c.dts
@@ -168,52 +168,42 @@  &sdmmc2 {
 	status = "okay";
 };

-&sdmmc2_b4_od_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
-	};
+&{sdmmc2_b4_od_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>; /* SDMMC2_D3 */
 };

-&sdmmc2_b4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
-	};
+&{sdmmc2_b4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */
 };

-&sdmmc2_b4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
-			 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
-			 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
-			 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
-			 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
-			 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
-	};
+&{sdmmc2_b4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */
+		 <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */
+		 <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */
+		 <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */
+		 <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */
+		 <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */
 };

-&sdmmc2_d47_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-	};
+&{sdmmc2_d47_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
 };

-&sdmmc2_d47_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
-			 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
-			 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
-			 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
-	};
+&{sdmmc2_d47_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */
+		 <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */
+		 <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */
+		 <STM32_PINMUX('D', 3, ANALOG)>; /* SDMMC2_D7 */
 };

 &sdmmc3 {
@@ -238,34 +228,28 @@  mmc@1 {
 	};
 };

-&sdmmc3_b4_od_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
-	};
+&{sdmmc3_b4_od_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */
 };

-&sdmmc3_b4_pins_b {
-	pins1 {
-		pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
-	};
+&{sdmmc3_b4_pins_b/pins1} {
+	pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */
 };

-&sdmmc3_b4_sleep_pins_b {
-	pins {
-		pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
-			 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
-			 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
-			 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
-			 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
-			 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
-	};
+&{sdmmc3_b4_sleep_pins_b/pins} {
+	pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */
+		 <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */
+		 <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */
+		 <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */
+		 <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */
+		 <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */
 };

 &spi1 {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
index 3938d357e198f..98a31c2b5d456 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1l.dtsi
@@ -69,30 +69,27 @@  &ethernet0 {
 	status = "okay";
 };

-&ethernet0_rmii_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
-			 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
-	};
+&{ethernet0_rmii_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, AF11)>; /* ETH1_RMII_TX_EN */
 };

-&ethernet0_rmii_sleep_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
-			 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
-			 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
-			 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
-			 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
-			 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
-			 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
-	};
+&{ethernet0_rmii_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('C', 4, AF11)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, AF11)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, AF11)>,  /* ETH1_RMII_REF_CLK input */
+		 <STM32_PINMUX('A', 7, AF11)>;  /* ETH1_RMII_CRS_DV */
+};
+
+&{ethernet0_rmii_sleep_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */
+		 <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */
+		 <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */
+		 <STM32_PINMUX('C', 4, ANALOG)>,  /* ETH1_RMII_RXD0 */
+		 <STM32_PINMUX('C', 5, ANALOG)>,  /* ETH1_RMII_RXD1 */
+		 <STM32_PINMUX('A', 1, ANALOG)>,  /* ETH1_RMII_REF_CLK */
+		 <STM32_PINMUX('A', 7, ANALOG)>;  /* ETH1_RMII_CRS_DV */
 };

 &iwdg2 {
@@ -122,12 +119,11 @@  flash@0 {
 	};
 };

-&qspi_bk1_pins_a {
-	pins1 {
-		bias-pull-up;
-		drive-push-pull;
-		slew-rate = <1>;
-	};
+&{qspi_bk1_pins_a/pins} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+	drive-push-pull;
+	slew-rate = <1>;
 };

 &rng1 {
@@ -147,22 +143,24 @@  &sdmmc1 {
 	status = "okay";
 };

-&sdmmc1_b4_od_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
+&{sdmmc1_b4_od_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

-&sdmmc1_b4_pins_a {
-	pins1 {
-		bias-pull-up;
-	};
-	pins2 {
-		bias-pull-up;
-	};
+&{sdmmc1_b4_od_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins1} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{sdmmc1_b4_pins_a/pins2} {
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

 &uart4 {
@@ -175,34 +173,30 @@  &uart4 {
 	status = "okay";
 };

-&uart4_idle_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
+&{uart4_idle_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>; /* UART4_TX */
 };

-&uart4_pins_a {
-	pins1 {
-		pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
-		bias-disable;
-		drive-push-pull;
-		slew-rate = <0>;
-	};
-	pins2 {
-		pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
-		bias-pull-up;
-	};
+&{uart4_idle_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
 };

-&uart4_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
-			<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
-	};
+&{uart4_pins_a/pins1} {
+	pinmux = <STM32_PINMUX('B', 9, AF8)>; /* UART4_TX */
+	slew-rate = <0>;
+};
+
+&{uart4_pins_a/pins2} {
+	pinmux = <STM32_PINMUX('B', 2, AF8)>; /* UART4_RX */
+	/delete-property/ bias-disable;
+	bias-pull-up;
+};
+
+&{uart4_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('B', 9, ANALOG)>, /* UART4_TX */
+		<STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */
 };

 &usbh_ehci {
diff --git a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
index ad25929e64e6e..b6be61b159e72 100644
--- a/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
+++ b/arch/arm/boot/dts/st/stm32mp151a-prtt1s.dts
@@ -36,18 +36,14 @@  co2-sensor@62 {
 	};
 };

-&i2c1_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
-	};
+&{i2c1_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */
 };

-&i2c1_sleep_pins_a {
-	pins {
-		pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
-			 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
-	};
+&{i2c1_sleep_pins_a/pins} {
+	pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */
+		 <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */
 };

 &mdio0 {