mbox series

[0/4] X1E Surface Laptop 7 support

Message ID 20240809-topic-sl7-v1-0-2090433d8dfc@quicinc.com (mailing list archive)
Headers show
Series X1E Surface Laptop 7 support | expand

Message

Konrad Dybcio Aug. 9, 2024, 1:43 a.m. UTC
This series brings support for X Elite-based Surface Laptop 7 devices.

See patch 4 for a more detailed status explanation

Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
---
Konrad Dybcio (4):
      dt-bindings: arm: qcom: Add Surface Laptop 7 devices
      firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
      arm64: dts: qcom: x1e80100: Add UART2
      arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices

 Documentation/devicetree/bindings/arm/qcom.yaml    |   2 +
 arch/arm64/boot/dts/qcom/Makefile                  |   2 +
 .../boot/dts/qcom/x1e80100-microsoft-romulus.dtsi  | 818 +++++++++++++++++++++
 .../boot/dts/qcom/x1e80100-microsoft-romulus13.dts |  13 +
 .../boot/dts/qcom/x1e80100-microsoft-romulus15.dts |  13 +
 arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi       |   8 +
 arch/arm64/boot/dts/qcom/x1e80100.dtsi             |  52 ++
 drivers/firmware/qcom/qcom_scm.c                   |   2 +
 8 files changed, 910 insertions(+)
---
base-commit: 1e391b34f6aa043c7afa40a2103163a0ef06d179
change-id: 20240809-topic-sl7-db3eef0ada6d

Best regards,

Comments

Rob Herring (Arm) Aug. 12, 2024, 3:09 p.m. UTC | #1
On Fri, 09 Aug 2024 03:43:19 +0200, Konrad Dybcio wrote:
> This series brings support for X Elite-based Surface Laptop 7 devices.
> 
> See patch 4 for a more detailed status explanation
> 
> Signed-off-by: Konrad Dybcio <quic_kdybcio@quicinc.com>
> ---
> Konrad Dybcio (4):
>       dt-bindings: arm: qcom: Add Surface Laptop 7 devices
>       firmware: qcom: scm: Allow QSEECOM on Surface Laptop 7 models
>       arm64: dts: qcom: x1e80100: Add UART2
>       arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |   2 +
>  arch/arm64/boot/dts/qcom/Makefile                  |   2 +
>  .../boot/dts/qcom/x1e80100-microsoft-romulus.dtsi  | 818 +++++++++++++++++++++
>  .../boot/dts/qcom/x1e80100-microsoft-romulus13.dts |  13 +
>  .../boot/dts/qcom/x1e80100-microsoft-romulus15.dts |  13 +
>  arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi       |   8 +
>  arch/arm64/boot/dts/qcom/x1e80100.dtsi             |  52 ++
>  drivers/firmware/qcom/qcom_scm.c                   |   2 +
>  8 files changed, 910 insertions(+)
> ---
> base-commit: 1e391b34f6aa043c7afa40a2103163a0ef06d179
> change-id: 20240809-topic-sl7-db3eef0ada6d
> 
> Best regards,
> --
> Konrad Dybcio <quic_kdybcio@quicinc.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


New warnings running 'make CHECK_DTBS=y qcom/x1e80100-microsoft-romulus13.dtb qcom/x1e80100-microsoft-romulus15.dtb' for 20240809-topic-sl7-v1-0-2090433d8dfc@quicinc.com:

arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dtb: domain-idle-states: cluster-sleep-0: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dtb: domain-idle-states: cluster-sleep-1: 'idle-state-name' does not match any of the regexes: 'pinctrl-[0-9]+'
	from schema $id: http://devicetree.org/schemas/power/domain-idle-state.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dtb: pci@1bf8000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dtb: pci@1bf8000: Unevaluated properties are not allowed ('vddpe-3v3-supply' was unexpected)
	from schema $id: http://devicetree.org/schemas/pci/qcom,pcie-x1e80100.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus15.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#
arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus13.dtb: usb@a2f8800: interrupt-names: ['pwr_event', 'dp_hs_phy_irq', 'dm_hs_phy_irq'] is too short
	from schema $id: http://devicetree.org/schemas/usb/qcom,dwc3.yaml#