| Message ID | 20240812165041.3815525-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/1] dt-bindings: soc: fsl: cpm_qe: convert network.txt to yaml | expand |
On Mon, Aug 12, 2024 at 12:50:35PM -0400, Frank Li wrote: > Convert binding doc newwork.txt to yaml format. > > HDLC part: > - Convert to "fsl,ucc-hdlc.yaml". > - Add missed reg and interrupt property. > - Update example to pass build. > > ethernet part: > - Convert to net/fsl,cpm-enet.yaml > - Add 0x in example, which should be hex value > - Add ref to ethernet-controller.yaml > > mdio part: > - Convert to net/fsl,cpm-mdio.yaml > - Add 0x in example, which should be hex value > - Add ref to mdio.yaml > > Signed-off-by: Frank Li <Frank.Li@nxp.com> Sorry, It is sent by accidently. it was already post at https://lore.kernel.org/imx/20240809175113.3470393-1-Frank.Li@nxp.com/T/#u Frank > --- > This one is quite old. The detail informaiton is limited. > --- > .../devicetree/bindings/net/fsl,cpm-enet.yaml | 59 ++++++++ > .../devicetree/bindings/net/fsl,cpm-mdio.yaml | 55 +++++++ > .../bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml | 140 ++++++++++++++++++ > .../bindings/soc/fsl/cpm_qe/network.txt | 130 ---------------- > 4 files changed, 254 insertions(+), 130 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml > create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml > delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt > > diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml > new file mode 100644 > index 0000000000000..da836477e8bad > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml > @@ -0,0 +1,59 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Network for cpm enet > + > +maintainers: > + - Frank Li <Frank.Li@nxp.com> > + > +properties: > + compatible: > + oneOf: > + - enum: > + - fsl,cpm1-scc-enet > + - fsl,cpm2-scc-enet > + - fsl,cpm1-fec-enet > + - fsl,cpm2-fcc-enet > + - fsl,qe-enet > + - items: > + - enum: > + - fsl,mpc8272-fcc-enet > + - const: fsl,cpm2-fcc-enet > + > + reg: > + minItems: 1 > + maxItems: 3 > + > + interrupts: > + maxItems: 1 > + > + fsl,cpm-command: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: cpm command > + > +required: > + - compatible > + - reg > + - interrupts > + > +allOf: > + - $ref: ethernet-controller.yaml > + > +unevaluatedProperties: false > + > +examples: > + - | > + ethernet@11300 { > + compatible = "fsl,mpc8272-fcc-enet", > + "fsl,cpm2-fcc-enet"; > + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; > + local-mac-address = [ 00 00 00 00 00 00 ]; > + interrupts = <20 8>; > + interrupt-parent = <&pic>; > + phy-handle = <&phy0>; > + fsl,cpm-command = <0x12000300>; > + }; > + > diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml > new file mode 100644 > index 0000000000000..b1791a3c490e2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml > @@ -0,0 +1,55 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Freescale CPM MDIO Device > + > +maintainers: > + - Frank Li <Frank.Li@nxp.com> > + > +properties: > + compatible: > + oneOf: > + - enum: > + - fsl,pq1-fec-mdio > + - fsl,cpm2-mdio-bitbang > + - items: > + - const: fsl,mpc8272ads-mdio-bitbang > + - const: fsl,mpc8272-mdio-bitbang > + - const: fsl,cpm2-mdio-bitbang > + > + reg: > + maxItems: 1 > + > + fsl,mdio-pin: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: pin of port C controlling mdio data > + > + fsl,mdc-pin: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: pin of port C controlling mdio clock > + > +required: > + - compatible > + - reg > + > +allOf: > + - $ref: mdio.yaml# > + > +unevaluatedProperties: false > + > +examples: > + - | > + mdio@10d40 { > + compatible = "fsl,mpc8272ads-mdio-bitbang", > + "fsl,mpc8272-mdio-bitbang", > + "fsl,cpm2-mdio-bitbang"; > + reg = <0x10d40 0x14>; > + #address-cells = <1>; > + #size-cells = <0>; > + fsl,mdio-pin = <12>; > + fsl,mdc-pin = <13>; > + }; > + > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml > new file mode 100644 > index 0000000000000..64ffbf75dd9d2 > --- /dev/null > +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml > @@ -0,0 +1,140 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: High-Level Data Link Control(HDLC) > + > +description: HDLC part in Universal communication controllers (UCCs) > + > +maintainers: > + - Frank Li <Frank.Li@nxp.com> > + > +properties: > + compatible: > + const: fsl,ucc-hdlc > + > + reg: > + maxItems: 1 > + > + interrupts: > + maxItems: 1 > + > + cell-index: > + $ref: /schemas/types.yaml#/definitions/uint32 > + > + rx-clock-name: > + $ref: /schemas/types.yaml#/definitions/string > + oneOf: > + - pattern: "^brg([0-9]|1[0-6])$" > + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" > + > + tx-clock-name: > + $ref: /schemas/types.yaml#/definitions/string > + oneOf: > + - pattern: "^brg([0-9]|1[0-6])$" > + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" > + > + fsl,tdm-interface: > + $ref: /schemas/types.yaml#/definitions/flag > + description: Specify that hdlc is based on tdm-interface > + > + fsl,rx-sync-clock: > + $ref: /schemas/types.yaml#/definitions/string > + description: rx-sync > + enum: > + - none > + - rsync_pin > + - brg9 > + - brg10 > + - brg11 > + - brg13 > + - brg14 > + - brg15 > + > + fsl,tx-sync-clock: > + $ref: /schemas/types.yaml#/definitions/string > + description: tx-sync > + enum: > + - none > + - tsync_pin > + - brg9 > + - brg10 > + - brg11 > + - brg13 > + - brg14 > + - brg15 > + > + fsl,tdm-framer-type: > + $ref: /schemas/types.yaml#/definitions/string > + description: required for tdm interface > + enum: [e1, t1] > + > + fsl,tdm-id: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: number of TDM ID > + > + fsl,tx-timeslot-mask: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + required for tdm interface. > + time slot mask for TDM operation. Indicates which time > + slots used for transmitting and receiving. > + > + fsl,rx-timeslot-mask: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + required for tdm interface. > + time slot mask for TDM operation. Indicates which time > + slots used for transmitting and receiving. > + > + fsl,siram-entry-id: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + required for tdm interface > + Must be 0,2,4...64. the number of TDM entry. > + > + fsl,tdm-internal-loopback: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + optional for tdm interface > + Internal loopback connecting on TDM layer. > + > + fsl,hmask: > + $ref: /schemas/types.yaml#/definitions/uint16 > + description: | > + HDLC address recognition. Set to zero to disable > + address filtering of packets: > + fsl,hmask = /bits/ 16 <0x0000>; > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + communication@2000 { > + compatible = "fsl,ucc-hdlc"; > + reg = <0x2000 0x200>; > + rx-clock-name = "clk8"; > + tx-clock-name = "clk9"; > + fsl,rx-sync-clock = "rsync_pin"; > + fsl,tx-sync-clock = "tsync_pin"; > + fsl,tx-timeslot-mask = <0xfffffffe>; > + fsl,rx-timeslot-mask = <0xfffffffe>; > + fsl,tdm-framer-type = "e1"; > + fsl,tdm-id = <0>; > + fsl,siram-entry-id = <0>; > + fsl,tdm-interface; > + }; > + > + - | > + communication@2000 { > + compatible = "fsl,ucc-hdlc"; > + reg = <0x2000 0x200>; > + rx-clock-name = "brg1"; > + tx-clock-name = "brg1"; > + }; > diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt > deleted file mode 100644 > index 6d2dd8a31482a..0000000000000 > --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt > +++ /dev/null > @@ -1,130 +0,0 @@ > -* Network > - > -Currently defined compatibles: > -- fsl,cpm1-scc-enet > -- fsl,cpm2-scc-enet > -- fsl,cpm1-fec-enet > -- fsl,cpm2-fcc-enet (third resource is GFEMR) > -- fsl,qe-enet > - > -Example: > - > - ethernet@11300 { > - compatible = "fsl,mpc8272-fcc-enet", > - "fsl,cpm2-fcc-enet"; > - reg = <11300 20 8400 100 11390 1>; > - local-mac-address = [ 00 00 00 00 00 00 ]; > - interrupts = <20 8>; > - interrupt-parent = <&PIC>; > - phy-handle = <&PHY0>; > - fsl,cpm-command = <12000300>; > - }; > - > -* MDIO > - > -Currently defined compatibles: > -fsl,pq1-fec-mdio (reg is same as first resource of FEC device) > -fsl,cpm2-mdio-bitbang (reg is port C registers) > - > -Properties for fsl,cpm2-mdio-bitbang: > -fsl,mdio-pin : pin of port C controlling mdio data > -fsl,mdc-pin : pin of port C controlling mdio clock > - > -Example: > - mdio@10d40 { > - compatible = "fsl,mpc8272ads-mdio-bitbang", > - "fsl,mpc8272-mdio-bitbang", > - "fsl,cpm2-mdio-bitbang"; > - reg = <10d40 14>; > - #address-cells = <1>; > - #size-cells = <0>; > - fsl,mdio-pin = <12>; > - fsl,mdc-pin = <13>; > - }; > - > -* HDLC > - > -Currently defined compatibles: > -- fsl,ucc-hdlc > - > -Properties for fsl,ucc-hdlc: > -- rx-clock-name > -- tx-clock-name > - Usage: required > - Value type: <string> > - Definition : Must be "brg1"-"brg16" for internal clock source, > - Must be "clk1"-"clk24" for external clock source. > - > -- fsl,tdm-interface > - Usage: optional > - Value type: <empty> > - Definition : Specify that hdlc is based on tdm-interface > - > -The property below is dependent on fsl,tdm-interface: > -- fsl,rx-sync-clock > - Usage: required > - Value type: <string> > - Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15". > - > -- fsl,tx-sync-clock > - Usage: required > - Value type: <string> > - Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15". > - > -- fsl,tdm-framer-type > - Usage: required for tdm interface > - Value type: <string> > - Definition : "e1" or "t1".Now e1 and t1 are used, other framer types > - are not supported. > - > -- fsl,tdm-id > - Usage: required for tdm interface > - Value type: <u32> > - Definition : number of TDM ID > - > -- fsl,tx-timeslot-mask > -- fsl,rx-timeslot-mask > - Usage: required for tdm interface > - Value type: <u32> > - Definition : time slot mask for TDM operation. Indicates which time > - slots used for transmitting and receiving. > - > -- fsl,siram-entry-id > - Usage: required for tdm interface > - Value type: <u32> > - Definition : Must be 0,2,4...64. the number of TDM entry. > - > -- fsl,tdm-internal-loopback > - usage: optional for tdm interface > - value type: <empty> > - Definition : Internal loopback connecting on TDM layer. > -- fsl,hmask > - usage: optional > - Value type: <u16> > - Definition: HDLC address recognition. Set to zero to disable > - address filtering of packets: > - fsl,hmask = /bits/ 16 <0x0000>; > - > -Example for tdm interface: > - > - ucc@2000 { > - compatible = "fsl,ucc-hdlc"; > - rx-clock-name = "clk8"; > - tx-clock-name = "clk9"; > - fsl,rx-sync-clock = "rsync_pin"; > - fsl,tx-sync-clock = "tsync_pin"; > - fsl,tx-timeslot-mask = <0xfffffffe>; > - fsl,rx-timeslot-mask = <0xfffffffe>; > - fsl,tdm-framer-type = "e1"; > - fsl,tdm-id = <0>; > - fsl,siram-entry-id = <0>; > - fsl,tdm-interface; > - }; > - > -Example for hdlc without tdm interface: > - > - ucc@2000 { > - compatible = "fsl,ucc-hdlc"; > - rx-clock-name = "brg1"; > - tx-clock-name = "brg1"; > - }; > -- > 2.34.1 >
On Mon, 12 Aug 2024 12:50:35 -0400 Frank Li wrote: > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml > create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml > delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt Any preference who applies this? net or soc or Rob? No preference here, FWIW: Acked-by: Jakub Kicinski <kuba@kernel.org> > Sorry, It is sent by accidently. it was already post at > https://lore.kernel.org/imx/20240809175113.3470393-1-Frank.Li@nxp.com/T/#u patchwork for one thing considers this a newer version of the previous posting. So hard to tell where any discussion is expected to happen.
On Mon, 12 Aug 2024 12:50:35 -0400, Frank Li wrote: > Convert binding doc newwork.txt to yaml format. > > HDLC part: > - Convert to "fsl,ucc-hdlc.yaml". > - Add missed reg and interrupt property. > - Update example to pass build. > > ethernet part: > - Convert to net/fsl,cpm-enet.yaml > - Add 0x in example, which should be hex value > - Add ref to ethernet-controller.yaml > > mdio part: > - Convert to net/fsl,cpm-mdio.yaml > - Add 0x in example, which should be hex value > - Add ref to mdio.yaml > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > This one is quite old. The detail informaiton is limited. > --- > .../devicetree/bindings/net/fsl,cpm-enet.yaml | 59 ++++++++ > .../devicetree/bindings/net/fsl,cpm-mdio.yaml | 55 +++++++ > .../bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml | 140 ++++++++++++++++++ > .../bindings/soc/fsl/cpm_qe/network.txt | 130 ---------------- > 4 files changed, 254 insertions(+), 130 deletions(-) > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml > create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml > create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml > delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt > Applied, thanks!
diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml new file mode 100644 index 0000000000000..da836477e8bad --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,cpm-enet.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Network for cpm enet + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,cpm1-scc-enet + - fsl,cpm2-scc-enet + - fsl,cpm1-fec-enet + - fsl,cpm2-fcc-enet + - fsl,qe-enet + - items: + - enum: + - fsl,mpc8272-fcc-enet + - const: fsl,cpm2-fcc-enet + + reg: + minItems: 1 + maxItems: 3 + + interrupts: + maxItems: 1 + + fsl,cpm-command: + $ref: /schemas/types.yaml#/definitions/uint32 + description: cpm command + +required: + - compatible + - reg + - interrupts + +allOf: + - $ref: ethernet-controller.yaml + +unevaluatedProperties: false + +examples: + - | + ethernet@11300 { + compatible = "fsl,mpc8272-fcc-enet", + "fsl,cpm2-fcc-enet"; + reg = <0x11300 0x20 0x8400 0x100 0x11390 1>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <20 8>; + interrupt-parent = <&pic>; + phy-handle = <&phy0>; + fsl,cpm-command = <0x12000300>; + }; + diff --git a/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml new file mode 100644 index 0000000000000..b1791a3c490e2 --- /dev/null +++ b/Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/fsl,cpm-mdio.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale CPM MDIO Device + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + oneOf: + - enum: + - fsl,pq1-fec-mdio + - fsl,cpm2-mdio-bitbang + - items: + - const: fsl,mpc8272ads-mdio-bitbang + - const: fsl,mpc8272-mdio-bitbang + - const: fsl,cpm2-mdio-bitbang + + reg: + maxItems: 1 + + fsl,mdio-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: pin of port C controlling mdio data + + fsl,mdc-pin: + $ref: /schemas/types.yaml#/definitions/uint32 + description: pin of port C controlling mdio clock + +required: + - compatible + - reg + +allOf: + - $ref: mdio.yaml# + +unevaluatedProperties: false + +examples: + - | + mdio@10d40 { + compatible = "fsl,mpc8272ads-mdio-bitbang", + "fsl,mpc8272-mdio-bitbang", + "fsl,cpm2-mdio-bitbang"; + reg = <0x10d40 0x14>; + #address-cells = <1>; + #size-cells = <0>; + fsl,mdio-pin = <12>; + fsl,mdc-pin = <13>; + }; + diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml new file mode 100644 index 0000000000000..64ffbf75dd9d2 --- /dev/null +++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: High-Level Data Link Control(HDLC) + +description: HDLC part in Universal communication controllers (UCCs) + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + const: fsl,ucc-hdlc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + cell-index: + $ref: /schemas/types.yaml#/definitions/uint32 + + rx-clock-name: + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - pattern: "^brg([0-9]|1[0-6])$" + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" + + tx-clock-name: + $ref: /schemas/types.yaml#/definitions/string + oneOf: + - pattern: "^brg([0-9]|1[0-6])$" + - pattern: "^clk([0-9]|1[0-9]|2[0-4])$" + + fsl,tdm-interface: + $ref: /schemas/types.yaml#/definitions/flag + description: Specify that hdlc is based on tdm-interface + + fsl,rx-sync-clock: + $ref: /schemas/types.yaml#/definitions/string + description: rx-sync + enum: + - none + - rsync_pin + - brg9 + - brg10 + - brg11 + - brg13 + - brg14 + - brg15 + + fsl,tx-sync-clock: + $ref: /schemas/types.yaml#/definitions/string + description: tx-sync + enum: + - none + - tsync_pin + - brg9 + - brg10 + - brg11 + - brg13 + - brg14 + - brg15 + + fsl,tdm-framer-type: + $ref: /schemas/types.yaml#/definitions/string + description: required for tdm interface + enum: [e1, t1] + + fsl,tdm-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: number of TDM ID + + fsl,tx-timeslot-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface. + time slot mask for TDM operation. Indicates which time + slots used for transmitting and receiving. + + fsl,rx-timeslot-mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface. + time slot mask for TDM operation. Indicates which time + slots used for transmitting and receiving. + + fsl,siram-entry-id: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + required for tdm interface + Must be 0,2,4...64. the number of TDM entry. + + fsl,tdm-internal-loopback: + $ref: /schemas/types.yaml#/definitions/flag + description: + optional for tdm interface + Internal loopback connecting on TDM layer. + + fsl,hmask: + $ref: /schemas/types.yaml#/definitions/uint16 + description: | + HDLC address recognition. Set to zero to disable + address filtering of packets: + fsl,hmask = /bits/ 16 <0x0000>; + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + communication@2000 { + compatible = "fsl,ucc-hdlc"; + reg = <0x2000 0x200>; + rx-clock-name = "clk8"; + tx-clock-name = "clk9"; + fsl,rx-sync-clock = "rsync_pin"; + fsl,tx-sync-clock = "tsync_pin"; + fsl,tx-timeslot-mask = <0xfffffffe>; + fsl,rx-timeslot-mask = <0xfffffffe>; + fsl,tdm-framer-type = "e1"; + fsl,tdm-id = <0>; + fsl,siram-entry-id = <0>; + fsl,tdm-interface; + }; + + - | + communication@2000 { + compatible = "fsl,ucc-hdlc"; + reg = <0x2000 0x200>; + rx-clock-name = "brg1"; + tx-clock-name = "brg1"; + }; diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt deleted file mode 100644 index 6d2dd8a31482a..0000000000000 --- a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt +++ /dev/null @@ -1,130 +0,0 @@ -* Network - -Currently defined compatibles: -- fsl,cpm1-scc-enet -- fsl,cpm2-scc-enet -- fsl,cpm1-fec-enet -- fsl,cpm2-fcc-enet (third resource is GFEMR) -- fsl,qe-enet - -Example: - - ethernet@11300 { - compatible = "fsl,mpc8272-fcc-enet", - "fsl,cpm2-fcc-enet"; - reg = <11300 20 8400 100 11390 1>; - local-mac-address = [ 00 00 00 00 00 00 ]; - interrupts = <20 8>; - interrupt-parent = <&PIC>; - phy-handle = <&PHY0>; - fsl,cpm-command = <12000300>; - }; - -* MDIO - -Currently defined compatibles: -fsl,pq1-fec-mdio (reg is same as first resource of FEC device) -fsl,cpm2-mdio-bitbang (reg is port C registers) - -Properties for fsl,cpm2-mdio-bitbang: -fsl,mdio-pin : pin of port C controlling mdio data -fsl,mdc-pin : pin of port C controlling mdio clock - -Example: - mdio@10d40 { - compatible = "fsl,mpc8272ads-mdio-bitbang", - "fsl,mpc8272-mdio-bitbang", - "fsl,cpm2-mdio-bitbang"; - reg = <10d40 14>; - #address-cells = <1>; - #size-cells = <0>; - fsl,mdio-pin = <12>; - fsl,mdc-pin = <13>; - }; - -* HDLC - -Currently defined compatibles: -- fsl,ucc-hdlc - -Properties for fsl,ucc-hdlc: -- rx-clock-name -- tx-clock-name - Usage: required - Value type: <string> - Definition : Must be "brg1"-"brg16" for internal clock source, - Must be "clk1"-"clk24" for external clock source. - -- fsl,tdm-interface - Usage: optional - Value type: <empty> - Definition : Specify that hdlc is based on tdm-interface - -The property below is dependent on fsl,tdm-interface: -- fsl,rx-sync-clock - Usage: required - Value type: <string> - Definition : Must be "none", "rsync_pin", "brg9-11" and "brg13-15". - -- fsl,tx-sync-clock - Usage: required - Value type: <string> - Definition : Must be "none", "tsync_pin", "brg9-11" and "brg13-15". - -- fsl,tdm-framer-type - Usage: required for tdm interface - Value type: <string> - Definition : "e1" or "t1".Now e1 and t1 are used, other framer types - are not supported. - -- fsl,tdm-id - Usage: required for tdm interface - Value type: <u32> - Definition : number of TDM ID - -- fsl,tx-timeslot-mask -- fsl,rx-timeslot-mask - Usage: required for tdm interface - Value type: <u32> - Definition : time slot mask for TDM operation. Indicates which time - slots used for transmitting and receiving. - -- fsl,siram-entry-id - Usage: required for tdm interface - Value type: <u32> - Definition : Must be 0,2,4...64. the number of TDM entry. - -- fsl,tdm-internal-loopback - usage: optional for tdm interface - value type: <empty> - Definition : Internal loopback connecting on TDM layer. -- fsl,hmask - usage: optional - Value type: <u16> - Definition: HDLC address recognition. Set to zero to disable - address filtering of packets: - fsl,hmask = /bits/ 16 <0x0000>; - -Example for tdm interface: - - ucc@2000 { - compatible = "fsl,ucc-hdlc"; - rx-clock-name = "clk8"; - tx-clock-name = "clk9"; - fsl,rx-sync-clock = "rsync_pin"; - fsl,tx-sync-clock = "tsync_pin"; - fsl,tx-timeslot-mask = <0xfffffffe>; - fsl,rx-timeslot-mask = <0xfffffffe>; - fsl,tdm-framer-type = "e1"; - fsl,tdm-id = <0>; - fsl,siram-entry-id = <0>; - fsl,tdm-interface; - }; - -Example for hdlc without tdm interface: - - ucc@2000 { - compatible = "fsl,ucc-hdlc"; - rx-clock-name = "brg1"; - tx-clock-name = "brg1"; - };
Convert binding doc newwork.txt to yaml format. HDLC part: - Convert to "fsl,ucc-hdlc.yaml". - Add missed reg and interrupt property. - Update example to pass build. ethernet part: - Convert to net/fsl,cpm-enet.yaml - Add 0x in example, which should be hex value - Add ref to ethernet-controller.yaml mdio part: - Convert to net/fsl,cpm-mdio.yaml - Add 0x in example, which should be hex value - Add ref to mdio.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> --- This one is quite old. The detail informaiton is limited. --- .../devicetree/bindings/net/fsl,cpm-enet.yaml | 59 ++++++++ .../devicetree/bindings/net/fsl,cpm-mdio.yaml | 55 +++++++ .../bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml | 140 ++++++++++++++++++ .../bindings/soc/fsl/cpm_qe/network.txt | 130 ---------------- 4 files changed, 254 insertions(+), 130 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-enet.yaml create mode 100644 Documentation/devicetree/bindings/net/fsl,cpm-mdio.yaml create mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/fsl,ucc-hdlc.yaml delete mode 100644 Documentation/devicetree/bindings/soc/fsl/cpm_qe/network.txt