Message ID | 20240812-sg2002-adc-v4-2-599bdb67592f@bootlin.com (mailing list archive) |
---|---|
State | Changes Requested |
Headers | show |
Series | Add SARADC support on Sophgo CV18XX series | expand |
On 2024/8/12 23:00, Thomas Bonnefille wrote: > This adds a driver for the common Sophgo SARADC. Not common. Please double check the whole patchset. > > Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> > --- > drivers/iio/adc/Kconfig | 10 ++ > drivers/iio/adc/Makefile | 1 + > drivers/iio/adc/sophgo-cv18xx-adc.c | 208 ++++++++++++++++++++++++++++++++++++ > 3 files changed, 219 insertions(+) > > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig > index f60fe85a30d5..b10bf26d8e86 100644 > --- a/drivers/iio/adc/Kconfig > +++ b/drivers/iio/adc/Kconfig > @@ -1156,6 +1156,16 @@ config SC27XX_ADC > This driver can also be built as a module. If so, the module > will be called sc27xx_adc. > > +config SOPHGO_CV18XX_ADC > + tristate "Sophgo CV18XX series SARADC" > + depends on ARCH_SOPHGO || COMPILE_TEST > + help > + Say yes here to build support for the SARADC integrated inside > + the Sophgo CV18XX series SoCs. > + > + This driver can also be built as a module. If so, the module > + will be called sophgo_cv18xx_adc. > + > config SPEAR_ADC > tristate "ST SPEAr ADC" > depends on PLAT_SPEAR || COMPILE_TEST > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile > index d370e066544e..24c241b12ef0 100644 > --- a/drivers/iio/adc/Makefile > +++ b/drivers/iio/adc/Makefile > @@ -105,6 +105,7 @@ obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o > obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o > obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o > obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o > +obj-$(CONFIG_SOPHGO_CV18XX_ADC) += sophgo-cv18xx-adc.o > obj-$(CONFIG_SPEAR_ADC) += spear_adc.o > obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o > obj-$(CONFIG_STM32_ADC) += stm32-adc.o > diff --git a/drivers/iio/adc/sophgo-cv18xx-adc.c b/drivers/iio/adc/sophgo-cv18xx-adc.c > new file mode 100644 > index 000000000000..ab7ee0f482cc > --- /dev/null > +++ b/drivers/iio/adc/sophgo-cv18xx-adc.c > @@ -0,0 +1,208 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later > +/* > + * Sophgo CV18XX series SARADC Driver > + * > + * Copyright (C) Bootlin 2024 > + * Author: Thomas Bonnefille <thomas.bonnefille@bootlin.com> > + */ > + > +#include "linux/err.h" <linux/err.h> ? And please sort with the file name alphabeta. > +#include <linux/bitfield.h> > +#include <linux/clk.h> > +#include <linux/completion.h> > +#include <linux/dev_printk.h> > +#include <linux/interrupt.h> > +#include <linux/iio/iio.h> > +#include <linux/iopoll.h> > +#include <linux/mod_devicetable.h> > +#include <linux/module.h> > +#include <linux/mutex.h> > +#include <linux/platform_device.h> > + > +#define CV18XX_ADC_CTRL_REG 0x04 > +#define CV18XX_ADC_EN BIT(0) Should be one space between "#define" and macro-name. Please check this for the whole file. Run "./scripts/checkpatch.pl --strict" if it can help you check this format error? > +#define CV18XX_ADC_SEL(x) BIT((x) + 5) > +#define CV18XX_ADC_STATUS_REG 0x08 > +#define CV18XX_ADC_BUSY BIT(0) > +#define CV18XX_ADC_CYC_SET_REG 0x0C > +/* The default cycle configuration is set to maximize the accuracy */ > +#define CV18XX_ADC_DEF_STARTUP_CYCLE_MASK 0x1F > +#define CV18XX_ADC_DEF_SAMPLE_WINDOW_MASK 0xF00 > +#define CV18XX_ADC_DEF_CLOCK_DIVIDER_MASK 0xF000 > +#define CV18XX_ADC_DEF_COMPARE_CYCLE_MASK 0xF0000 > +#define CV18XX_ADC_CH_RESULT_REG(x) (0x14 + 4 * (x)) > +#define CV18XX_ADC_CH_RESULT GENMASK(11, 0) > +#define CV18XX_ADC_CH_VALID BIT(15) > +#define CV18XX_ADC_INTR_EN_REG 0x20 > +#define CV18XX_ADC_INTR_CLR_REG 0x24 > +#define CV18XX_ADC_INTR_CLR_BIT BIT(0) > +#define CV18XX_ADC_INTR_STA_REG 0x28 > +#define CV18XX_ADC_INTR_STA_BIT BIT(0) > + > +#define CV18XX_ADC_CHANNEL(index) \ > + { \ > + .type = IIO_VOLTAGE, \ > + .indexed = 1, \ > + .channel = index, \ > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ > + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ > + .scan_index = index, \ > + } > + > +struct cv18xx_adc { > + struct completion completion; > + void __iomem *regs; > + struct mutex lock; /* ADC Control and Result register */ > + int irq; > +}; > + > +static const struct iio_chan_spec sophgo_channels[] = { > + CV18XX_ADC_CHANNEL(0), > + CV18XX_ADC_CHANNEL(1), > + CV18XX_ADC_CHANNEL(2), > +}; > + > +static void cv18xx_adc_start_measurement(struct cv18xx_adc *saradc, > + int channel) > +{ > + writel(0, saradc->regs + CV18XX_ADC_CTRL_REG); > + writel(CV18XX_ADC_SEL(channel) | CV18XX_ADC_EN, > + saradc->regs + CV18XX_ADC_CTRL_REG); > +} > + > +static int cv18xx_adc_wait(struct cv18xx_adc *saradc) > +{ > + if (saradc->irq < 0) { > + u32 reg; > + > + return readl_poll_timeout(saradc->regs + CV18XX_ADC_STATUS_REG, > + reg, !(reg & CV18XX_ADC_BUSY), > + 500, 1000000); > + } > + return wait_for_completion_timeout(&saradc->completion, > + msecs_to_jiffies(1000)) > 0 > + ? 0 : -ETIMEDOUT; > +} > + > +static int cv18xx_adc_read_raw(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + > + switch (mask) { > + case IIO_CHAN_INFO_RAW:{ > + struct cv18xx_adc *saradc = iio_priv(indio_dev); > + u32 sample; > + > + scoped_guard(mutex, &saradc->lock) { > + int ret; > + > + cv18xx_adc_start_measurement(saradc, chan->scan_index); > + ret = cv18xx_adc_wait(saradc); > + if (ret < 0) > + return ret; > + > + sample = readl(saradc->regs + CV18XX_ADC_CH_RESULT_REG(chan->scan_index)); > + } > + if (!(sample & CV18XX_ADC_CH_VALID)) > + return -ENODATA; > + > + *val = sample & CV18XX_ADC_CH_RESULT; > + return IIO_VAL_INT; > + } > + case IIO_CHAN_INFO_SCALE: > + *val = 3300; > + *val2 = 12; > + return IIO_VAL_FRACTIONAL_LOG2; > + default: > + return -EINVAL; > + } > +} > + > +static irqreturn_t cv18xx_adc_interrupt_handler(int irq, void *private) > +{ > + struct cv18xx_adc *saradc = private; > + > + if (!(FIELD_GET(CV18XX_ADC_INTR_STA_BIT, > + readl(saradc->regs + CV18XX_ADC_INTR_STA_REG)))) > + return IRQ_NONE; > + > + writel(CV18XX_ADC_INTR_CLR_BIT, saradc->regs + CV18XX_ADC_INTR_CLR_REG); > + complete(&saradc->completion); > + return IRQ_HANDLED; > +} > + > +static const struct iio_info cv18xx_adc_info = { > + .read_raw = &cv18xx_adc_read_raw, > +}; > + > +static int cv18xx_adc_probe(struct platform_device *pdev) > +{ > + struct cv18xx_adc *saradc; > + struct iio_dev *indio_dev; > + struct clk *clk; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*saradc)); > + if (!indio_dev) > + return -ENOMEM; > + > + saradc = iio_priv(indio_dev); > + indio_dev->name = "sophgo-cv18xx-adc"; > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &cv18xx_adc_info; > + indio_dev->num_channels = ARRAY_SIZE(sophgo_channels); > + indio_dev->channels = sophgo_channels; > + > + clk = devm_clk_get_enabled(&pdev->dev, NULL); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + saradc->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(saradc->regs)) > + return PTR_ERR(saradc->regs); > + > + saradc->irq = platform_get_irq_optional(pdev, 0); > + if (saradc->irq >= 0) { > + init_completion(&saradc->completion); > + ret = devm_request_irq(&pdev->dev, saradc->irq, > + cv18xx_adc_interrupt_handler, 0, > + dev_name(&pdev->dev), saradc); > + if (ret) > + return ret; > + > + writel(1, saradc->regs + CV18XX_ADC_INTR_EN_REG); > + } > + > + ret = devm_mutex_init(&pdev->dev, &saradc->lock); > + if (ret) > + return ret; > + > + platform_set_drvdata(pdev, indio_dev); > + writel(FIELD_PREP(CV18XX_ADC_DEF_STARTUP_CYCLE_MASK, 0xF) | > + FIELD_PREP(CV18XX_ADC_DEF_SAMPLE_WINDOW_MASK, 0xF) | > + FIELD_PREP(CV18XX_ADC_DEF_CLOCK_DIVIDER_MASK, 0x1) | > + FIELD_PREP(CV18XX_ADC_DEF_COMPARE_CYCLE_MASK, 0xF), > + saradc->regs + CV18XX_ADC_CYC_SET_REG); > + > + return devm_iio_device_register(&pdev->dev, indio_dev); > +} > + > +static const struct of_device_id cv18xx_adc_match[] = { > + { .compatible = "sophgo,cv1800b-saradc", }, > + { } > +}; > +MODULE_DEVICE_TABLE(of, cv18xx_adc_match); > + > +static struct platform_driver cv18xx_adc_driver = { > + .driver = { > + .name = "sophgo-cv18xx-saradc", > + .of_match_table = cv18xx_adc_match, > + }, > + .probe = cv18xx_adc_probe, > +}; > +module_platform_driver(cv18xx_adc_driver); > + > +MODULE_AUTHOR("Thomas Bonnefille <thomas.bonnefille@bootlin.com>"); > +MODULE_DESCRIPTION("Sophgo CV18XX series SARADC driver"); > +MODULE_LICENSE("GPL"); >
On Mon, 12 Aug 2024 17:00:56 +0200 Thomas Bonnefille <thomas.bonnefille@bootlin.com> wrote: > This adds a driver for the common Sophgo SARADC. > > Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> Similar comment on wild cards to the one you resolved in the dt binding applies to the driver. So normally convention is pick a part and name after that for all function names, parameters etc. cv1800b seems appropriate given the binding. Other than that, just one trivial comment from me. Jonathan > diff --git a/drivers/iio/adc/sophgo-cv18xx-adc.c b/drivers/iio/adc/sophgo-cv18xx-adc.c > new file mode 100644 > index 000000000000..ab7ee0f482cc > --- /dev/null > +++ b/drivers/iio/adc/sophgo-cv18xx-adc.c > @@ -0,0 +1,208 @@ > +static int cv18xx_adc_probe(struct platform_device *pdev) > +{ > + struct cv18xx_adc *saradc; > + struct iio_dev *indio_dev; > + struct clk *clk; > + int ret; > + > + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*saradc)); > + if (!indio_dev) > + return -ENOMEM; > + > + saradc = iio_priv(indio_dev); > + indio_dev->name = "sophgo-cv18xx-adc"; This definitely doesn't want to be wildcard based > + indio_dev->modes = INDIO_DIRECT_MODE; > + indio_dev->info = &cv18xx_adc_info; > + indio_dev->num_channels = ARRAY_SIZE(sophgo_channels); > + indio_dev->channels = sophgo_channels; > + > + clk = devm_clk_get_enabled(&pdev->dev, NULL); > + if (IS_ERR(clk)) > + return PTR_ERR(clk); > + > + saradc->regs = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(saradc->regs)) > + return PTR_ERR(saradc->regs); > + > + saradc->irq = platform_get_irq_optional(pdev, 0); > + if (saradc->irq >= 0) { > + init_completion(&saradc->completion); > + ret = devm_request_irq(&pdev->dev, saradc->irq, > + cv18xx_adc_interrupt_handler, 0, > + dev_name(&pdev->dev), saradc); > + if (ret) > + return ret; > + > + writel(1, saradc->regs + CV18XX_ADC_INTR_EN_REG); > + } > + > + ret = devm_mutex_init(&pdev->dev, &saradc->lock); > + if (ret) > + return ret; > + > + platform_set_drvdata(pdev, indio_dev); Is this used? > + writel(FIELD_PREP(CV18XX_ADC_DEF_STARTUP_CYCLE_MASK, 0xF) | > + FIELD_PREP(CV18XX_ADC_DEF_SAMPLE_WINDOW_MASK, 0xF) | > + FIELD_PREP(CV18XX_ADC_DEF_CLOCK_DIVIDER_MASK, 0x1) | > + FIELD_PREP(CV18XX_ADC_DEF_COMPARE_CYCLE_MASK, 0xF), > + saradc->regs + CV18XX_ADC_CYC_SET_REG); > + > + return devm_iio_device_register(&pdev->dev, indio_dev); > +}
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index f60fe85a30d5..b10bf26d8e86 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -1156,6 +1156,16 @@ config SC27XX_ADC This driver can also be built as a module. If so, the module will be called sc27xx_adc. +config SOPHGO_CV18XX_ADC + tristate "Sophgo CV18XX series SARADC" + depends on ARCH_SOPHGO || COMPILE_TEST + help + Say yes here to build support for the SARADC integrated inside + the Sophgo CV18XX series SoCs. + + This driver can also be built as a module. If so, the module + will be called sophgo_cv18xx_adc. + config SPEAR_ADC tristate "ST SPEAr ADC" depends on PLAT_SPEAR || COMPILE_TEST diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index d370e066544e..24c241b12ef0 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -105,6 +105,7 @@ obj-$(CONFIG_ROCKCHIP_SARADC) += rockchip_saradc.o obj-$(CONFIG_RZG2L_ADC) += rzg2l_adc.o obj-$(CONFIG_SC27XX_ADC) += sc27xx_adc.o obj-$(CONFIG_SD_ADC_MODULATOR) += sd_adc_modulator.o +obj-$(CONFIG_SOPHGO_CV18XX_ADC) += sophgo-cv18xx-adc.o obj-$(CONFIG_SPEAR_ADC) += spear_adc.o obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o obj-$(CONFIG_STM32_ADC) += stm32-adc.o diff --git a/drivers/iio/adc/sophgo-cv18xx-adc.c b/drivers/iio/adc/sophgo-cv18xx-adc.c new file mode 100644 index 000000000000..ab7ee0f482cc --- /dev/null +++ b/drivers/iio/adc/sophgo-cv18xx-adc.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Sophgo CV18XX series SARADC Driver + * + * Copyright (C) Bootlin 2024 + * Author: Thomas Bonnefille <thomas.bonnefille@bootlin.com> + */ + +#include "linux/err.h" +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/completion.h> +#include <linux/dev_printk.h> +#include <linux/interrupt.h> +#include <linux/iio/iio.h> +#include <linux/iopoll.h> +#include <linux/mod_devicetable.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/platform_device.h> + +#define CV18XX_ADC_CTRL_REG 0x04 +#define CV18XX_ADC_EN BIT(0) +#define CV18XX_ADC_SEL(x) BIT((x) + 5) +#define CV18XX_ADC_STATUS_REG 0x08 +#define CV18XX_ADC_BUSY BIT(0) +#define CV18XX_ADC_CYC_SET_REG 0x0C +/* The default cycle configuration is set to maximize the accuracy */ +#define CV18XX_ADC_DEF_STARTUP_CYCLE_MASK 0x1F +#define CV18XX_ADC_DEF_SAMPLE_WINDOW_MASK 0xF00 +#define CV18XX_ADC_DEF_CLOCK_DIVIDER_MASK 0xF000 +#define CV18XX_ADC_DEF_COMPARE_CYCLE_MASK 0xF0000 +#define CV18XX_ADC_CH_RESULT_REG(x) (0x14 + 4 * (x)) +#define CV18XX_ADC_CH_RESULT GENMASK(11, 0) +#define CV18XX_ADC_CH_VALID BIT(15) +#define CV18XX_ADC_INTR_EN_REG 0x20 +#define CV18XX_ADC_INTR_CLR_REG 0x24 +#define CV18XX_ADC_INTR_CLR_BIT BIT(0) +#define CV18XX_ADC_INTR_STA_REG 0x28 +#define CV18XX_ADC_INTR_STA_BIT BIT(0) + +#define CV18XX_ADC_CHANNEL(index) \ + { \ + .type = IIO_VOLTAGE, \ + .indexed = 1, \ + .channel = index, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .scan_index = index, \ + } + +struct cv18xx_adc { + struct completion completion; + void __iomem *regs; + struct mutex lock; /* ADC Control and Result register */ + int irq; +}; + +static const struct iio_chan_spec sophgo_channels[] = { + CV18XX_ADC_CHANNEL(0), + CV18XX_ADC_CHANNEL(1), + CV18XX_ADC_CHANNEL(2), +}; + +static void cv18xx_adc_start_measurement(struct cv18xx_adc *saradc, + int channel) +{ + writel(0, saradc->regs + CV18XX_ADC_CTRL_REG); + writel(CV18XX_ADC_SEL(channel) | CV18XX_ADC_EN, + saradc->regs + CV18XX_ADC_CTRL_REG); +} + +static int cv18xx_adc_wait(struct cv18xx_adc *saradc) +{ + if (saradc->irq < 0) { + u32 reg; + + return readl_poll_timeout(saradc->regs + CV18XX_ADC_STATUS_REG, + reg, !(reg & CV18XX_ADC_BUSY), + 500, 1000000); + } + return wait_for_completion_timeout(&saradc->completion, + msecs_to_jiffies(1000)) > 0 + ? 0 : -ETIMEDOUT; +} + +static int cv18xx_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + + switch (mask) { + case IIO_CHAN_INFO_RAW:{ + struct cv18xx_adc *saradc = iio_priv(indio_dev); + u32 sample; + + scoped_guard(mutex, &saradc->lock) { + int ret; + + cv18xx_adc_start_measurement(saradc, chan->scan_index); + ret = cv18xx_adc_wait(saradc); + if (ret < 0) + return ret; + + sample = readl(saradc->regs + CV18XX_ADC_CH_RESULT_REG(chan->scan_index)); + } + if (!(sample & CV18XX_ADC_CH_VALID)) + return -ENODATA; + + *val = sample & CV18XX_ADC_CH_RESULT; + return IIO_VAL_INT; + } + case IIO_CHAN_INFO_SCALE: + *val = 3300; + *val2 = 12; + return IIO_VAL_FRACTIONAL_LOG2; + default: + return -EINVAL; + } +} + +static irqreturn_t cv18xx_adc_interrupt_handler(int irq, void *private) +{ + struct cv18xx_adc *saradc = private; + + if (!(FIELD_GET(CV18XX_ADC_INTR_STA_BIT, + readl(saradc->regs + CV18XX_ADC_INTR_STA_REG)))) + return IRQ_NONE; + + writel(CV18XX_ADC_INTR_CLR_BIT, saradc->regs + CV18XX_ADC_INTR_CLR_REG); + complete(&saradc->completion); + return IRQ_HANDLED; +} + +static const struct iio_info cv18xx_adc_info = { + .read_raw = &cv18xx_adc_read_raw, +}; + +static int cv18xx_adc_probe(struct platform_device *pdev) +{ + struct cv18xx_adc *saradc; + struct iio_dev *indio_dev; + struct clk *clk; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*saradc)); + if (!indio_dev) + return -ENOMEM; + + saradc = iio_priv(indio_dev); + indio_dev->name = "sophgo-cv18xx-adc"; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &cv18xx_adc_info; + indio_dev->num_channels = ARRAY_SIZE(sophgo_channels); + indio_dev->channels = sophgo_channels; + + clk = devm_clk_get_enabled(&pdev->dev, NULL); + if (IS_ERR(clk)) + return PTR_ERR(clk); + + saradc->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(saradc->regs)) + return PTR_ERR(saradc->regs); + + saradc->irq = platform_get_irq_optional(pdev, 0); + if (saradc->irq >= 0) { + init_completion(&saradc->completion); + ret = devm_request_irq(&pdev->dev, saradc->irq, + cv18xx_adc_interrupt_handler, 0, + dev_name(&pdev->dev), saradc); + if (ret) + return ret; + + writel(1, saradc->regs + CV18XX_ADC_INTR_EN_REG); + } + + ret = devm_mutex_init(&pdev->dev, &saradc->lock); + if (ret) + return ret; + + platform_set_drvdata(pdev, indio_dev); + writel(FIELD_PREP(CV18XX_ADC_DEF_STARTUP_CYCLE_MASK, 0xF) | + FIELD_PREP(CV18XX_ADC_DEF_SAMPLE_WINDOW_MASK, 0xF) | + FIELD_PREP(CV18XX_ADC_DEF_CLOCK_DIVIDER_MASK, 0x1) | + FIELD_PREP(CV18XX_ADC_DEF_COMPARE_CYCLE_MASK, 0xF), + saradc->regs + CV18XX_ADC_CYC_SET_REG); + + return devm_iio_device_register(&pdev->dev, indio_dev); +} + +static const struct of_device_id cv18xx_adc_match[] = { + { .compatible = "sophgo,cv1800b-saradc", }, + { } +}; +MODULE_DEVICE_TABLE(of, cv18xx_adc_match); + +static struct platform_driver cv18xx_adc_driver = { + .driver = { + .name = "sophgo-cv18xx-saradc", + .of_match_table = cv18xx_adc_match, + }, + .probe = cv18xx_adc_probe, +}; +module_platform_driver(cv18xx_adc_driver); + +MODULE_AUTHOR("Thomas Bonnefille <thomas.bonnefille@bootlin.com>"); +MODULE_DESCRIPTION("Sophgo CV18XX series SARADC driver"); +MODULE_LICENSE("GPL");
This adds a driver for the common Sophgo SARADC. Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com> --- drivers/iio/adc/Kconfig | 10 ++ drivers/iio/adc/Makefile | 1 + drivers/iio/adc/sophgo-cv18xx-adc.c | 208 ++++++++++++++++++++++++++++++++++++ 3 files changed, 219 insertions(+)