| Message ID | 20240812231820.3838925-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [1/1] dt-bindings: extcon: ptn5150: add child node port | expand |
On 13/08/2024 01:18, Frank Li wrote: > Add child node 'port' to allow connect to usb controller to do role-switch. > > Fix below warning: > arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' > from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml > This looks reasonable however intention was to switch to connector node, wasn't it? I actually wonder how the commit 095b96b2b adding connector could fix that warning... The binding and device driver might be incomplete. There should be a connector somewhere. Anyway, in any case, please extend the example. Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52dd..28c34d78708cb 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -37,6 +37,11 @@ properties: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + required: - compatible - interrupts
Add child node 'port' to allow connect to usb controller to do role-switch. Fix below warning: arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml | 5 +++++ 1 file changed, 5 insertions(+)