diff mbox series

[05/17] arm64: dts: imx8mm-phygate: rename uart4_rs485_en to uart4-rs485-en-hog

Message ID 20240813-imx_warning-v1-5-3494426aea09@nxp.com (mailing list archive)
State Superseded
Headers show
Series arm64: dts: imx: 3rd dtb warning clearn up | expand

Commit Message

Frank Li Aug. 13, 2024, 4:35 a.m. UTC 
Rename gpio uart4_rs485_en to uart4-rs485-en-hog to fix below warning:
arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
  gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
 arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

Comments

Alexander Stein Aug. 13, 2024, 8:23 a.m. UTC | #1 
Am Dienstag, 13. August 2024, 06:35:00 CEST schrieb Frank Li:
> Rename gpio uart4_rs485_en to uart4-rs485-en-hog to fix below warning:
> arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
>   gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com>

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-
>  2 files changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
> index f1f38b739ef76..78f4e8d5814da 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
> @@ -18,7 +18,7 @@ &gpio3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpio3_hog>;
>  
> -	uart4_rs485_en {
> +	uart4-rs485-en-hog {
>  		gpio-hog;
>  		gpios = <20 GPIO_ACTIVE_HIGH>;
>  		output-low;
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
> index 1d8951e1a47e8..66288948bdd39 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
> @@ -19,7 +19,7 @@ &gpio3 {
>  	pinctrl-names = "default";
>  	pinctrl-0 = <&pinctrl_gpio3_hog>;
>  
> -	uart4_rs485_en {
> +	uart4-rs485-en-hog {
>  		gpio-hog;
>  		gpios = <20 GPIO_ACTIVE_HIGH>;
>  		output-high;
> 
>
Krzysztof Kozlowski Aug. 13, 2024, 10:01 a.m. UTC | #2 
On 13/08/2024 06:35, Frank Li wrote:
> Rename gpio uart4_rs485_en to uart4-rs485-en-hog to fix below warning:
> arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtb:
>   gpio@30220000: 'uart4_rs485_en' does not match any of the regexes: '^(hog-[0-9]+|.+-hog(-[0-9]+)?)$', 'pinctrl-[0-9]+'
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
> ---
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso | 2 +-
>  arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso | 2 +-

These are simple node renames. Squash them all, not one board by one.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
index f1f38b739ef76..78f4e8d5814da 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs232.dtso
@@ -18,7 +18,7 @@  &gpio3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	uart4_rs485_en {
+	uart4-rs485-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-low;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
index 1d8951e1a47e8..66288948bdd39 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phygate-tauri-l-rs232-rs485.dtso
@@ -19,7 +19,7 @@  &gpio3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio3_hog>;
 
-	uart4_rs485_en {
+	uart4-rs485-en-hog {
 		gpio-hog;
 		gpios = <20 GPIO_ACTIVE_HIGH>;
 		output-high;