new file mode 100644
@@ -0,0 +1,60 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/misc/aspeed,ast2400-cvic.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aspeed Coprocessor Vectored Interrupt Controller
+
+maintainers:
+ - Andrew Jeffery <andrew@codeconstruct.com.au>
+
+description:
+ The Aspeed AST2400 and AST2500 SoCs have a controller that provides interrupts
+ to the ColdFire coprocessor. It's not a normal interrupt controller and it
+ would be rather inconvenient to create an interrupt tree for it, as it
+ somewhat shares some of the same sources as the main ARM interrupt controller
+ but with different numbers.
+
+ The AST2500 also supports a software generated interrupt.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - aspeed,ast2400-cvic
+ - aspeed,ast2500-cvic
+ - const: aspeed,cvic
+
+ reg:
+ maxItems: 1
+
+ valid-sources:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ maxItems: 1
+ description:
+ A bitmap of supported sources for the implementation.
+
+ copro-sw-interrupts:
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 32
+ description:
+ A list of interrupt numbers that can be used as software interrupts from
+ the ARM to the coprocessor.
+
+required:
+ - compatible
+ - reg
+ - valid-sources
+
+additionalProperties: false
+
+examples:
+ - |
+ interrupt-controller@1e6c2000 {
+ compatible = "aspeed,ast2500-cvic", "aspeed,cvic";
+ reg = <0x1e6c2000 0x80>;
+ valid-sources = <0xffffffff>;
+ copro-sw-interrupts = <1>;
+ };
deleted file mode 100644
@@ -1,35 +0,0 @@
-* ASPEED AST2400 and AST2500 coprocessor interrupt controller
-
-This file describes the bindings for the interrupt controller present
-in the AST2400 and AST2500 BMC SoCs which provides interrupt to the
-ColdFire coprocessor.
-
-It is not a normal interrupt controller and it would be rather
-inconvenient to create an interrupt tree for it as it somewhat shares
-some of the same sources as the main ARM interrupt controller but with
-different numbers.
-
-The AST2500 supports a SW generated interrupt
-
-Required properties:
-- reg: address and length of the register for the device.
-- compatible: "aspeed,cvic" and one of:
- "aspeed,ast2400-cvic"
- or
- "aspeed,ast2500-cvic"
-
-- valid-sources: One cell, bitmap of supported sources for the implementation
-
-Optional properties;
-- copro-sw-interrupts: List of interrupt numbers that can be used as
- SW interrupts from the ARM to the coprocessor.
- (AST2500 only)
-
-Example:
-
- cvic: copro-interrupt-controller@1e6c2000 {
- compatible = "aspeed,ast2500-cvic";
- valid-sources = <0xffffffff>;
- copro-sw-interrupts = <1>;
- reg = <0x1e6c2000 0x80>;
- };
Address warnings such as: arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: interrupt-controller@1e6c0080: 'valid-sources' does not match any of the regexes: 'pinctrl-[0-9]+' and arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-galaxy100.dtb: /ahb/copro-interrupt-controller@1e6c2000: failed to match any schema with compatible: ['aspeed,ast2400-cvic', 'aspeed-cvic'] Note that the conversion to DT schema causes some further warnings to be emitted, because the Aspeed devicetrees are not in great shape. These new warnings are resolved in a separate series: https://lore.kernel.org/lkml/20240802-dt-warnings-bmc-dts-cleanups-v1-0-1cb1378e5fcd@codeconstruct.com.au/ Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au> --- .../bindings/misc/aspeed,ast2400-cvic.yaml | 60 ++++++++++++++++++++++ .../devicetree/bindings/misc/aspeed,cvic.txt | 35 ------------- 2 files changed, 60 insertions(+), 35 deletions(-)