Message ID | 20240813234004.17807-1-laurent.pinchart@ideasonboard.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | [v3] arm64: dts: imx8mp: Add DT nodes for the two ISPs | expand |
Hi Laurent, thanks for the patch. Am Mittwoch, 14. August 2024, 01:40:04 CEST schrieb Laurent Pinchart: > From: Paul Elder <paul.elder@ideasonboard.com> > > The ISP supports both CSI and parallel interfaces, where port 0 > corresponds to the former and port 1 corresponds to the latter. Since > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > receiver, set them both to port 1. > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon > --- > Changes since v2: > > - Assign clock parent and frequency in blk-ctrl > > Changes since v1: > > - Fix clock ordering > - Add #address-cells and #size-cells to ports nodes > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++- > 1 file changed, 49 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index d9b5c40f6460..09f1e27ee220 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { > }; > }; > > + isp_0: isp@32e10000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e10000 0x10000>; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + isp_1: isp@32e20000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e20000 0x10000>; > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > dewarp: dwe@32e30000 { > compatible = "nxp,imx8mp-dw100"; > reg = <0x32e30000 0x10000>; > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > <&clk IMX8MP_CLK_MEDIA_APB>, > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, > + <&clk IMX8MP_CLK_MEDIA_ISP>, > <&clk IMX8MP_VIDEO_PLL1>; > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > <&clk IMX8MP_SYS_PLL1_800M>, > <&clk IMX8MP_VIDEO_PLL1_OUT>, > - <&clk IMX8MP_VIDEO_PLL1_OUT>; > + <&clk IMX8MP_VIDEO_PLL1_OUT>, > + <&clk IMX8MP_SYS_PLL2_500M>; > assigned-clock-rates = <500000000>, <200000000>, > - <0>, <0>, <1039500000>; > + <0>, <0>, <0>, <500000000>, > + <1039500000>; Isn't this one '<0>' too much? <500000000> is for IMX8MP_CLK_MEDIA_ISP, right? Best regards, Alexander > #power-domain-cells = <1>; > > lvds_bridge: bridge@5c { > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba >
Hi Alexander, On Wed, Aug 14, 2024 at 12:02:26PM +0200, Alexander Stein wrote: > Am Mittwoch, 14. August 2024, 01:40:04 CEST schrieb Laurent Pinchart: > > From: Paul Elder <paul.elder@ideasonboard.com> > > > > The ISP supports both CSI and parallel interfaces, where port 0 > > corresponds to the former and port 1 corresponds to the latter. Since > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > > receiver, set them both to port 1. > > > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon > > --- > > Changes since v2: > > > > - Assign clock parent and frequency in blk-ctrl > > > > Changes since v1: > > > > - Fix clock ordering > > - Add #address-cells and #size-cells to ports nodes > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++- > > 1 file changed, 49 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index d9b5c40f6460..09f1e27ee220 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { > > }; > > }; > > > > + isp_0: isp@32e10000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e10000 0x10000>; > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > + isp_1: isp@32e20000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e20000 0x10000>; > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > dewarp: dwe@32e30000 { > > compatible = "nxp,imx8mp-dw100"; > > reg = <0x32e30000 0x10000>; > > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > > <&clk IMX8MP_CLK_MEDIA_APB>, > > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, > > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, > > + <&clk IMX8MP_CLK_MEDIA_ISP>, > > <&clk IMX8MP_VIDEO_PLL1>; > > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > > <&clk IMX8MP_SYS_PLL1_800M>, > > <&clk IMX8MP_VIDEO_PLL1_OUT>, > > - <&clk IMX8MP_VIDEO_PLL1_OUT>; > > + <&clk IMX8MP_VIDEO_PLL1_OUT>, > > + <&clk IMX8MP_SYS_PLL2_500M>; > > assigned-clock-rates = <500000000>, <200000000>, > > - <0>, <0>, <1039500000>; > > + <0>, <0>, <0>, <500000000>, > > + <1039500000>; > > Isn't this one '<0>' too much? <500000000> is for IMX8MP_CLK_MEDIA_ISP, right? Indeed. I'll send a v3. > > #power-domain-cells = <1>; > > > > lvds_bridge: bridge@5c { > > > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
On Tue, Aug 13, 2024 at 6:40 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > From: Paul Elder <paul.elder@ideasonboard.com> > > The ISP supports both CSI and parallel interfaces, where port 0 > corresponds to the former and port 1 corresponds to the latter. Since > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > receiver, set them both to port 1. > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon > --- > Changes since v2: > > - Assign clock parent and frequency in blk-ctrl > > Changes since v1: > > - Fix clock ordering > - Add #address-cells and #size-cells to ports nodes > --- > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++- > 1 file changed, 49 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > index d9b5c40f6460..09f1e27ee220 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { > }; > }; > > + isp_0: isp@32e10000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e10000 0x10000>; > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > + isp_1: isp@32e20000 { > + compatible = "fsl,imx8mp-isp"; > + reg = <0x32e20000 0x10000>; > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > + clock-names = "isp", "aclk", "hclk"; > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > + status = "disabled"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@1 { > + reg = <1>; > + }; > + }; > + }; > + > dewarp: dwe@32e30000 { > compatible = "nxp,imx8mp-dw100"; > reg = <0x32e30000 0x10000>; > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > <&clk IMX8MP_CLK_MEDIA_APB>, > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, > + <&clk IMX8MP_CLK_MEDIA_ISP>, > <&clk IMX8MP_VIDEO_PLL1>; > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > <&clk IMX8MP_SYS_PLL1_800M>, > <&clk IMX8MP_VIDEO_PLL1_OUT>, > - <&clk IMX8MP_VIDEO_PLL1_OUT>; > + <&clk IMX8MP_VIDEO_PLL1_OUT>, > + <&clk IMX8MP_SYS_PLL2_500M>; > assigned-clock-rates = <500000000>, <200000000>, > - <0>, <0>, <1039500000>; > + <0>, <0>, <0>, <500000000>, Is the insertion of the extra <0> here correct? You inserted one clock above for IMX8MP_CLK_MEDIA_ISP, but it appears you inserted two here. I think this might break the IMX8MP_VIDEO_PLL1 rate and not set the IMX8MP_CLK_MEDIA_ISP as expected. Am I missing something? adam > + <1039500000>; > #power-domain-cells = <1>; > > lvds_bridge: bridge@5c { > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba > -- > Regards, > > Laurent Pinchart >
On Sun, Aug 18, 2024 at 01:24:01PM -0500, Adam Ford wrote: > On Tue, Aug 13, 2024 at 6:40 PM Laurent Pinchart > <laurent.pinchart@ideasonboard.com> wrote: > > > > From: Paul Elder <paul.elder@ideasonboard.com> > > > > The ISP supports both CSI and parallel interfaces, where port 0 > > corresponds to the former and port 1 corresponds to the latter. Since > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > > receiver, set them both to port 1. > > > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon > > --- > > Changes since v2: > > > > - Assign clock parent and frequency in blk-ctrl > > > > Changes since v1: > > > > - Fix clock ordering > > - Add #address-cells and #size-cells to ports nodes > > --- > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++- > > 1 file changed, 49 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > index d9b5c40f6460..09f1e27ee220 100644 > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { > > }; > > }; > > > > + isp_0: isp@32e10000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e10000 0x10000>; > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > + isp_1: isp@32e20000 { > > + compatible = "fsl,imx8mp-isp"; > > + reg = <0x32e20000 0x10000>; > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > + clock-names = "isp", "aclk", "hclk"; > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > > + status = "disabled"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@1 { > > + reg = <1>; > > + }; > > + }; > > + }; > > + > > dewarp: dwe@32e30000 { > > compatible = "nxp,imx8mp-dw100"; > > reg = <0x32e30000 0x10000>; > > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > > <&clk IMX8MP_CLK_MEDIA_APB>, > > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, > > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, > > + <&clk IMX8MP_CLK_MEDIA_ISP>, > > <&clk IMX8MP_VIDEO_PLL1>; > > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > > <&clk IMX8MP_SYS_PLL1_800M>, > > <&clk IMX8MP_VIDEO_PLL1_OUT>, > > - <&clk IMX8MP_VIDEO_PLL1_OUT>; > > + <&clk IMX8MP_VIDEO_PLL1_OUT>, > > + <&clk IMX8MP_SYS_PLL2_500M>; > > assigned-clock-rates = <500000000>, <200000000>, > > - <0>, <0>, <1039500000>; > > + <0>, <0>, <0>, <500000000>, > > Is the insertion of the extra <0> here correct? You inserted one > clock above for IMX8MP_CLK_MEDIA_ISP, but it appears you inserted two > here. > I think this might break the IMX8MP_VIDEO_PLL1 rate and not set the > IMX8MP_CLK_MEDIA_ISP as expected. > > Am I missing something? You're missing v4 :-) > > + <1039500000>; > > #power-domain-cells = <1>; > > > > lvds_bridge: bridge@5c { > > > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba
On Sun, Aug 18, 2024 at 2:07 PM Laurent Pinchart <laurent.pinchart@ideasonboard.com> wrote: > > On Sun, Aug 18, 2024 at 01:24:01PM -0500, Adam Ford wrote: > > On Tue, Aug 13, 2024 at 6:40 PM Laurent Pinchart > > <laurent.pinchart@ideasonboard.com> wrote: > > > > > > From: Paul Elder <paul.elder@ideasonboard.com> > > > > > > The ISP supports both CSI and parallel interfaces, where port 0 > > > corresponds to the former and port 1 corresponds to the latter. Since > > > the i.MX8MP's ISPs are connected by the parallel interface to the CSI > > > receiver, set them both to port 1. > > > > > > Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> > > > Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > > > Tested-by: Adam Ford <aford173@gmail.com> # imx8mp-beacon > > > --- > > > Changes since v2: > > > > > > - Assign clock parent and frequency in blk-ctrl > > > > > > Changes since v1: > > > > > > - Fix clock ordering > > > - Add #address-cells and #size-cells to ports nodes > > > --- > > > arch/arm64/boot/dts/freescale/imx8mp.dtsi | 51 ++++++++++++++++++++++- > > > 1 file changed, 49 insertions(+), 2 deletions(-) > > > > > > diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > index d9b5c40f6460..09f1e27ee220 100644 > > > --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi > > > @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { > > > }; > > > }; > > > > > > + isp_0: isp@32e10000 { > > > + compatible = "fsl,imx8mp-isp"; > > > + reg = <0x32e10000 0x10000>; > > > + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > > + clock-names = "isp", "aclk", "hclk"; > > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > > + fsl,blk-ctrl = <&media_blk_ctrl 0>; > > > + status = "disabled"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@1 { > > > + reg = <1>; > > > + }; > > > + }; > > > + }; > > > + > > > + isp_1: isp@32e20000 { > > > + compatible = "fsl,imx8mp-isp"; > > > + reg = <0x32e20000 0x10000>; > > > + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; > > > + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, > > > + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; > > > + clock-names = "isp", "aclk", "hclk"; > > > + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; > > > + fsl,blk-ctrl = <&media_blk_ctrl 1>; > > > + status = "disabled"; > > > + > > > + ports { > > > + #address-cells = <1>; > > > + #size-cells = <0>; > > > + > > > + port@1 { > > > + reg = <1>; > > > + }; > > > + }; > > > + }; > > > + > > > dewarp: dwe@32e30000 { > > > compatible = "nxp,imx8mp-dw100"; > > > reg = <0x32e30000 0x10000>; > > > @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { > > > <&clk IMX8MP_CLK_MEDIA_APB>, > > > <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, > > > <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, > > > + <&clk IMX8MP_CLK_MEDIA_ISP>, > > > <&clk IMX8MP_VIDEO_PLL1>; > > > assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, > > > <&clk IMX8MP_SYS_PLL1_800M>, > > > <&clk IMX8MP_VIDEO_PLL1_OUT>, > > > - <&clk IMX8MP_VIDEO_PLL1_OUT>; > > > + <&clk IMX8MP_VIDEO_PLL1_OUT>, > > > + <&clk IMX8MP_SYS_PLL2_500M>; > > > assigned-clock-rates = <500000000>, <200000000>, > > > - <0>, <0>, <1039500000>; > > > + <0>, <0>, <0>, <500000000>, > > > > Is the insertion of the extra <0> here correct? You inserted one > > clock above for IMX8MP_CLK_MEDIA_ISP, but it appears you inserted two > > here. > > I think this might break the IMX8MP_VIDEO_PLL1 rate and not set the > > IMX8MP_CLK_MEDIA_ISP as expected. > > > > Am I missing something? > > You're missing v4 :-) Sorry. I was traveling in Europe, so I was going through the backlog in the order they arrived. :-) adam > > > > + <1039500000>; > > > #power-domain-cells = <1>; > > > > > > lvds_bridge: bridge@5c { > > > > > > base-commit: 7c626ce4bae1ac14f60076d00eafe71af30450ba > > -- > Regards, > > Laurent Pinchart
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi index d9b5c40f6460..09f1e27ee220 100644 --- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi @@ -1673,6 +1673,50 @@ isi_in_1: endpoint { }; }; + isp_0: isp@32e10000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e10000 0x10000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 0>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + + isp_1: isp@32e20000 { + compatible = "fsl,imx8mp-isp"; + reg = <0x32e20000 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>, + <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>, + <&clk IMX8MP_CLK_MEDIA_APB_ROOT>; + clock-names = "isp", "aclk", "hclk"; + power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>; + fsl,blk-ctrl = <&media_blk_ctrl 1>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@1 { + reg = <1>; + }; + }; + }; + dewarp: dwe@32e30000 { compatible = "nxp,imx8mp-dw100"; reg = <0x32e30000 0x10000>; @@ -1873,13 +1917,16 @@ media_blk_ctrl: blk-ctrl@32ec0000 { <&clk IMX8MP_CLK_MEDIA_APB>, <&clk IMX8MP_CLK_MEDIA_DISP1_PIX>, <&clk IMX8MP_CLK_MEDIA_DISP2_PIX>, + <&clk IMX8MP_CLK_MEDIA_ISP>, <&clk IMX8MP_VIDEO_PLL1>; assigned-clock-parents = <&clk IMX8MP_SYS_PLL2_1000M>, <&clk IMX8MP_SYS_PLL1_800M>, <&clk IMX8MP_VIDEO_PLL1_OUT>, - <&clk IMX8MP_VIDEO_PLL1_OUT>; + <&clk IMX8MP_VIDEO_PLL1_OUT>, + <&clk IMX8MP_SYS_PLL2_500M>; assigned-clock-rates = <500000000>, <200000000>, - <0>, <0>, <1039500000>; + <0>, <0>, <0>, <500000000>, + <1039500000>; #power-domain-cells = <1>; lvds_bridge: bridge@5c {