Message ID | 20240814181727.4030958-1-Frank.Li@nxp.com (mailing list archive) |
---|---|
State | Handled Elsewhere |
Headers | show |
Series | [1/1] dt-bindings: hwmon/regulator: Convert ltc2978.txt to yaml | expand |
On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote: > Convert binding doc ltc2978.txt to yaml format. > Additional change: > - add i2c node. > - basic it is regulator according to example, move it under regulator. > > Fix below warning: > arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: > failed to match any schema with compatible: ['lltc,ltc3882'] > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > --- > .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------ > .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++ > 2 files changed, 94 insertions(+), 62 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt > create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml I'm on the fence whether to move this... > diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt > deleted file mode 100644 > index 4e7f6215a4533..0000000000000 > --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt > +++ /dev/null > @@ -1,62 +0,0 @@ > -ltc2978 > - > -Required properties: > -- compatible: should contain one of: > - * "lltc,ltc2972" > - * "lltc,ltc2974" > - * "lltc,ltc2975" > - * "lltc,ltc2977" > - * "lltc,ltc2978" > - * "lltc,ltc2979" > - * "lltc,ltc2980" > - * "lltc,ltc3880" > - * "lltc,ltc3882" > - * "lltc,ltc3883" > - * "lltc,ltc3884" > - * "lltc,ltc3886" > - * "lltc,ltc3887" > - * "lltc,ltc3889" > - * "lltc,ltc7880" > - * "lltc,ltm2987" > - * "lltc,ltm4664" > - * "lltc,ltm4675" > - * "lltc,ltm4676" > - * "lltc,ltm4677" > - * "lltc,ltm4678" > - * "lltc,ltm4680" > - * "lltc,ltm4686" > - * "lltc,ltm4700" > -- reg: I2C slave address > - > -Optional properties: > -- regulators: A node that houses a sub-node for each regulator controlled by > - the device. Each sub-node is identified using the node's name, with valid > - values listed below. The content of each sub-node is defined by the > - standard binding for regulators; see regulator.txt. > - > -Valid names of regulators depend on number of supplies supported per device: > - * ltc2972 vout0 - vout1 > - * ltc2974, ltc2975 : vout0 - vout3 > - * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 > - * ltc2978 : vout0 - vout7 > - * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 > - * ltc7880 : vout0 - vout1 > - * ltc3883 : vout0 > - * ltm4664 : vout0 - vout1 > - * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 > - * ltm4680, ltm4686 : vout0 - vout1 > - * ltm4700 : vout0 - vout1 > - > -Example: > -ltc2978@5e { > - compatible = "lltc,ltc2978"; > - reg = <0x5e>; > - regulators { > - vout0 { > - regulator-name = "FPGA-2.5V"; > - }; > - vout2 { > - regulator-name = "FPGA-1.5V"; > - }; > - }; > -}; > diff --git a/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml > new file mode 100644 > index 0000000000000..20ae6152a2572 > --- /dev/null > +++ b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml > @@ -0,0 +1,94 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/regulator/lltc,ltc2972.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: ltc2978 I know the original was bad, but we can do better here. > + > +maintainers: > + - Jean Delvare <jdelvare@suse.com> > + > +properties: > + compatible: > + enum: > + - lltc,ltc2972 > + - lltc,ltc2974 > + - lltc,ltc2975 > + - lltc,ltc2977 > + - lltc,ltc2978 > + - lltc,ltc2979 > + - lltc,ltc2980 > + - lltc,ltc3880 > + - lltc,ltc3882 > + - lltc,ltc3883 > + - lltc,ltc3884 > + - lltc,ltc3886 > + - lltc,ltc3887 > + - lltc,ltc3889 > + - lltc,ltc7880 > + - lltc,ltm2987 > + - lltc,ltm4664 > + - lltc,ltm4675 > + - lltc,ltm4676 > + - lltc,ltm4677 > + - lltc,ltm4678 > + - lltc,ltm4680 > + - lltc,ltm4686 > + - lltc,ltm4700 > + > + reg: > + maxItems: 1 > + > + regulators: > + type: object > + description: | > + list of regulators provided by this controller. > + Valid names of regulators depend on number of supplies supported per device: > + * ltc2972 vout0 - vout1 > + * ltc2974, ltc2975 : vout0 - vout3 > + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 > + * ltc2978 : vout0 - vout7 > + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 > + * ltc7880 : vout0 - vout1 > + * ltc3883 : vout0 > + * ltm4664 : vout0 - vout1 > + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 > + * ltm4680, ltm4686 : vout0 - vout1 > + * ltm4700 : vout0 - vout1 > + > + patternProperties: > + "^vout[0-7]$": > + $ref: regulator.yaml# > + type: object > + unevaluatedProperties: false > + > + additionalProperties: false > + > +required: > + - compatible > + - reg > + > +additionalProperties: false > + > +examples: > + - | > + i2c { > + #address-cells = <1>; > + #size-cells = <0>; > + > + regulator@5e { > + compatible = "lltc,ltc2978"; > + reg = <0x5e>; > + > + regulators { > + vout0 { > + regulator-name = "FPGA-2.5V"; > + }; > + vout2 { > + regulator-name = "FPGA-1.5V"; > + }; > + }; > + }; > + }; > + > -- > 2.34.1 >
On Fri, Aug 16, 2024 at 03:55:55PM -0600, Rob Herring wrote: > On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote: > > delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt > > create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml > I'm on the fence whether to move this... I don't really have feelings either way, I'm perfectly happy to move it.
On 8/16/24 14:55, Rob Herring wrote: > On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote: >> Convert binding doc ltc2978.txt to yaml format. >> Additional change: >> - add i2c node. >> - basic it is regulator according to example, move it under regulator. >> >> Fix below warning: >> arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: >> failed to match any schema with compatible: ['lltc,ltc3882'] >> >> Signed-off-by: Frank Li <Frank.Li@nxp.com> >> --- >> .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------ >> .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++ >> 2 files changed, 94 insertions(+), 62 deletions(-) >> delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt >> create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml > > I'm on the fence whether to move this... > I don't really understand the rationale behind the move nor the rationale behind the rename, but then I don't really care or mind as long as no one claims that the _driver_ should be moved because the devicetree bindings moved. Note that "basic it is a regulator" is a bit stretching. The driver's regulator functionality must be enabled with a separate configuration option; the driver works perfectly fine as hardware monitoring driver if SENSORS_LTC2978_REGULATOR=n. Guenter
On Fri, Aug 16, 2024 at 05:03:16PM -0700, Guenter Roeck wrote: > On 8/16/24 14:55, Rob Herring wrote: > > On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote: > > > Convert binding doc ltc2978.txt to yaml format. > > > Additional change: > > > - add i2c node. > > > - basic it is regulator according to example, move it under regulator. > > > > > > Fix below warning: > > > arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: > > > failed to match any schema with compatible: ['lltc,ltc3882'] > > > > > > Signed-off-by: Frank Li <Frank.Li@nxp.com> > > > --- > > > .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------ > > > .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++ > > > 2 files changed, 94 insertions(+), 62 deletions(-) > > > delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt > > > create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml > > > > I'm on the fence whether to move this... > > > > I don't really understand the rationale behind the move nor the rationale behind > the rename, but then I don't really care or mind as long as no one claims that > the _driver_ should be moved because the devicetree bindings moved. Conor suggest use one of compatible string as file name. I just help convert it. I am not familar with this chip at all. According to original docuemnt, most talk about regular instead of hwmon. If you want to keep it under hwmon, I am fine. Frank > > Note that "basic it is a regulator" is a bit stretching. The driver's regulator > functionality must be enabled with a separate configuration option; the driver > works perfectly fine as hardware monitoring driver if SENSORS_LTC2978_REGULATOR=n. > > Guenter >
On 8/16/24 19:01, Frank Li wrote: > On Fri, Aug 16, 2024 at 05:03:16PM -0700, Guenter Roeck wrote: >> On 8/16/24 14:55, Rob Herring wrote: >>> On Wed, Aug 14, 2024 at 02:17:26PM -0400, Frank Li wrote: >>>> Convert binding doc ltc2978.txt to yaml format. >>>> Additional change: >>>> - add i2c node. >>>> - basic it is regulator according to example, move it under regulator. >>>> >>>> Fix below warning: >>>> arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: >>>> failed to match any schema with compatible: ['lltc,ltc3882'] >>>> >>>> Signed-off-by: Frank Li <Frank.Li@nxp.com> >>>> --- >>>> .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------ >>>> .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++ >>>> 2 files changed, 94 insertions(+), 62 deletions(-) >>>> delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt >>>> create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml >>> >>> I'm on the fence whether to move this... >>> >> >> I don't really understand the rationale behind the move nor the rationale behind >> the rename, but then I don't really care or mind as long as no one claims that >> the _driver_ should be moved because the devicetree bindings moved. > > Conor suggest use one of compatible string as file name. > > I just help convert it. I am not familar with this chip at all. > > According to original docuemnt, most talk about regular instead of hwmon. > > If you want to keep it under hwmon, I am fine. > Do whatever you want; I won't object. After all, it will be one less file in the scope of my responsibilities. I would kindly suggest, though, that it might not be the best idea to list a hardware monitoring maintainer as maintainer of devicetree property definitions associated with the regulator subsystem. You might at least want to make sure that Jean is ok with being listed as maintainer of this file. Thanks, Guenter
diff --git a/Documentation/devicetree/bindings/hwmon/ltc2978.txt b/Documentation/devicetree/bindings/hwmon/ltc2978.txt deleted file mode 100644 index 4e7f6215a4533..0000000000000 --- a/Documentation/devicetree/bindings/hwmon/ltc2978.txt +++ /dev/null @@ -1,62 +0,0 @@ -ltc2978 - -Required properties: -- compatible: should contain one of: - * "lltc,ltc2972" - * "lltc,ltc2974" - * "lltc,ltc2975" - * "lltc,ltc2977" - * "lltc,ltc2978" - * "lltc,ltc2979" - * "lltc,ltc2980" - * "lltc,ltc3880" - * "lltc,ltc3882" - * "lltc,ltc3883" - * "lltc,ltc3884" - * "lltc,ltc3886" - * "lltc,ltc3887" - * "lltc,ltc3889" - * "lltc,ltc7880" - * "lltc,ltm2987" - * "lltc,ltm4664" - * "lltc,ltm4675" - * "lltc,ltm4676" - * "lltc,ltm4677" - * "lltc,ltm4678" - * "lltc,ltm4680" - * "lltc,ltm4686" - * "lltc,ltm4700" -- reg: I2C slave address - -Optional properties: -- regulators: A node that houses a sub-node for each regulator controlled by - the device. Each sub-node is identified using the node's name, with valid - values listed below. The content of each sub-node is defined by the - standard binding for regulators; see regulator.txt. - -Valid names of regulators depend on number of supplies supported per device: - * ltc2972 vout0 - vout1 - * ltc2974, ltc2975 : vout0 - vout3 - * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 - * ltc2978 : vout0 - vout7 - * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 - * ltc7880 : vout0 - vout1 - * ltc3883 : vout0 - * ltm4664 : vout0 - vout1 - * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 - * ltm4680, ltm4686 : vout0 - vout1 - * ltm4700 : vout0 - vout1 - -Example: -ltc2978@5e { - compatible = "lltc,ltc2978"; - reg = <0x5e>; - regulators { - vout0 { - regulator-name = "FPGA-2.5V"; - }; - vout2 { - regulator-name = "FPGA-1.5V"; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml new file mode 100644 index 0000000000000..20ae6152a2572 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml @@ -0,0 +1,94 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/regulator/lltc,ltc2972.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ltc2978 + +maintainers: + - Jean Delvare <jdelvare@suse.com> + +properties: + compatible: + enum: + - lltc,ltc2972 + - lltc,ltc2974 + - lltc,ltc2975 + - lltc,ltc2977 + - lltc,ltc2978 + - lltc,ltc2979 + - lltc,ltc2980 + - lltc,ltc3880 + - lltc,ltc3882 + - lltc,ltc3883 + - lltc,ltc3884 + - lltc,ltc3886 + - lltc,ltc3887 + - lltc,ltc3889 + - lltc,ltc7880 + - lltc,ltm2987 + - lltc,ltm4664 + - lltc,ltm4675 + - lltc,ltm4676 + - lltc,ltm4677 + - lltc,ltm4678 + - lltc,ltm4680 + - lltc,ltm4686 + - lltc,ltm4700 + + reg: + maxItems: 1 + + regulators: + type: object + description: | + list of regulators provided by this controller. + Valid names of regulators depend on number of supplies supported per device: + * ltc2972 vout0 - vout1 + * ltc2974, ltc2975 : vout0 - vout3 + * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7 + * ltc2978 : vout0 - vout7 + * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1 + * ltc7880 : vout0 - vout1 + * ltc3883 : vout0 + * ltm4664 : vout0 - vout1 + * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1 + * ltm4680, ltm4686 : vout0 - vout1 + * ltm4700 : vout0 - vout1 + + patternProperties: + "^vout[0-7]$": + $ref: regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@5e { + compatible = "lltc,ltc2978"; + reg = <0x5e>; + + regulators { + vout0 { + regulator-name = "FPGA-2.5V"; + }; + vout2 { + regulator-name = "FPGA-1.5V"; + }; + }; + }; + }; +
Convert binding doc ltc2978.txt to yaml format. Additional change: - add i2c node. - basic it is regulator according to example, move it under regulator. Fix below warning: arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-cx.dtb: /soc/i2c@2000000/i2c-mux@77/i2c@2/regulator@5c: failed to match any schema with compatible: ['lltc,ltc3882'] Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../devicetree/bindings/hwmon/ltc2978.txt | 62 ------------ .../bindings/regulator/lltc,ltc2972.yaml | 94 +++++++++++++++++++ 2 files changed, 94 insertions(+), 62 deletions(-) delete mode 100644 Documentation/devicetree/bindings/hwmon/ltc2978.txt create mode 100644 Documentation/devicetree/bindings/regulator/lltc,ltc2972.yaml