Message ID | 20240808102742.4095904-2-jbrunet@baylibre.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
Series | reset: amlogic: move audio reset drivers out of CCF | expand |
On 08/08/2024 12:27, Jerome Brunet wrote: > To allow using the same driver for the main reset controller and the > auxiliary ones embedded in the clock controllers, convert the > the Amlogic reset driver to regmap. > > Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> > --- > drivers/reset/reset-meson.c | 79 ++++++++++++++++++++----------------- > 1 file changed, 43 insertions(+), 36 deletions(-) > > diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c > index f78be97898bc..b47431a21b86 100644 > --- a/drivers/reset/reset-meson.c > +++ b/drivers/reset/reset-meson.c > @@ -11,36 +11,43 @@ > #include <linux/of.h> > #include <linux/module.h> > #include <linux/platform_device.h> > +#include <linux/regmap.h> > #include <linux/reset-controller.h> > #include <linux/slab.h> > #include <linux/types.h> > > -#define BITS_PER_REG 32 > - > struct meson_reset_param { > int reg_count; > int level_offset; > }; > > struct meson_reset { > - void __iomem *reg_base; > const struct meson_reset_param *param; > struct reset_controller_dev rcdev; > - spinlock_t lock; > + struct regmap *map; > }; > > +static void meson_reset_offset_and_bit(struct meson_reset *data, > + unsigned long id, > + unsigned int *offset, > + unsigned int *bit) > +{ > + unsigned int stride = regmap_get_reg_stride(data->map); > + > + *offset = (id / (stride * BITS_PER_BYTE)) * stride; > + *bit = id % (stride * BITS_PER_BYTE); > +} > + > static int meson_reset_reset(struct reset_controller_dev *rcdev, > - unsigned long id) > + unsigned long id) > { > struct meson_reset *data = > container_of(rcdev, struct meson_reset, rcdev); > - unsigned int bank = id / BITS_PER_REG; > - unsigned int offset = id % BITS_PER_REG; > - void __iomem *reg_addr = data->reg_base + (bank << 2); > + unsigned int offset, bit; > > - writel(BIT(offset), reg_addr); > + meson_reset_offset_and_bit(data, id, &offset, &bit); > > - return 0; > + return regmap_write(data->map, offset, BIT(bit)); > } > > static int meson_reset_level(struct reset_controller_dev *rcdev, > @@ -48,25 +55,13 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, > { > struct meson_reset *data = > container_of(rcdev, struct meson_reset, rcdev); > - unsigned int bank = id / BITS_PER_REG; > - unsigned int offset = id % BITS_PER_REG; > - void __iomem *reg_addr; > - unsigned long flags; > - u32 reg; > + unsigned int offset, bit; > > - reg_addr = data->reg_base + data->param->level_offset + (bank << 2); > + meson_reset_offset_and_bit(data, id, &offset, &bit); > + offset += data->param->level_offset; > > - spin_lock_irqsave(&data->lock, flags); > - > - reg = readl(reg_addr); > - if (assert) > - writel(reg & ~BIT(offset), reg_addr); > - else > - writel(reg | BIT(offset), reg_addr); > - > - spin_unlock_irqrestore(&data->lock, flags); > - > - return 0; > + return regmap_update_bits(data->map, offset, > + BIT(bit), assert ? 0 : BIT(bit)); > } > > static int meson_reset_assert(struct reset_controller_dev *rcdev, > @@ -113,30 +108,42 @@ static const struct of_device_id meson_reset_dt_ids[] = { > }; > MODULE_DEVICE_TABLE(of, meson_reset_dt_ids); > > +static const struct regmap_config regmap_config = { > + .reg_bits = 32, > + .val_bits = 32, > + .reg_stride = 4, > +}; > + > static int meson_reset_probe(struct platform_device *pdev) > { > + struct device *dev = &pdev->dev; > struct meson_reset *data; > + void __iomem *base; > > - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); > + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); > if (!data) > return -ENOMEM; > > - data->reg_base = devm_platform_ioremap_resource(pdev, 0); > - if (IS_ERR(data->reg_base)) > - return PTR_ERR(data->reg_base); > + base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(base)) > + return PTR_ERR(base); > > - data->param = of_device_get_match_data(&pdev->dev); > + data->param = of_device_get_match_data(dev); > if (!data->param) > return -ENODEV; > > - spin_lock_init(&data->lock); > + data->map = devm_regmap_init_mmio(dev, base, ®map_config); > + if (IS_ERR(data->map)) > + return dev_err_probe(dev, PTR_ERR(data->map), > + "can't init regmap mmio region\n"); > > data->rcdev.owner = THIS_MODULE; > - data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG; > + data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE > + * regmap_config.reg_stride; > data->rcdev.ops = &meson_reset_ops; > - data->rcdev.of_node = pdev->dev.of_node; > + data->rcdev.of_node = dev->of_node; > > - return devm_reset_controller_register(&pdev->dev, &data->rcdev); > + return devm_reset_controller_register(dev, &data->rcdev); > } > > static struct platform_driver meson_reset_driver = { Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
diff --git a/drivers/reset/reset-meson.c b/drivers/reset/reset-meson.c index f78be97898bc..b47431a21b86 100644 --- a/drivers/reset/reset-meson.c +++ b/drivers/reset/reset-meson.c @@ -11,36 +11,43 @@ #include <linux/of.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/regmap.h> #include <linux/reset-controller.h> #include <linux/slab.h> #include <linux/types.h> -#define BITS_PER_REG 32 - struct meson_reset_param { int reg_count; int level_offset; }; struct meson_reset { - void __iomem *reg_base; const struct meson_reset_param *param; struct reset_controller_dev rcdev; - spinlock_t lock; + struct regmap *map; }; +static void meson_reset_offset_and_bit(struct meson_reset *data, + unsigned long id, + unsigned int *offset, + unsigned int *bit) +{ + unsigned int stride = regmap_get_reg_stride(data->map); + + *offset = (id / (stride * BITS_PER_BYTE)) * stride; + *bit = id % (stride * BITS_PER_BYTE); +} + static int meson_reset_reset(struct reset_controller_dev *rcdev, - unsigned long id) + unsigned long id) { struct meson_reset *data = container_of(rcdev, struct meson_reset, rcdev); - unsigned int bank = id / BITS_PER_REG; - unsigned int offset = id % BITS_PER_REG; - void __iomem *reg_addr = data->reg_base + (bank << 2); + unsigned int offset, bit; - writel(BIT(offset), reg_addr); + meson_reset_offset_and_bit(data, id, &offset, &bit); - return 0; + return regmap_write(data->map, offset, BIT(bit)); } static int meson_reset_level(struct reset_controller_dev *rcdev, @@ -48,25 +55,13 @@ static int meson_reset_level(struct reset_controller_dev *rcdev, { struct meson_reset *data = container_of(rcdev, struct meson_reset, rcdev); - unsigned int bank = id / BITS_PER_REG; - unsigned int offset = id % BITS_PER_REG; - void __iomem *reg_addr; - unsigned long flags; - u32 reg; + unsigned int offset, bit; - reg_addr = data->reg_base + data->param->level_offset + (bank << 2); + meson_reset_offset_and_bit(data, id, &offset, &bit); + offset += data->param->level_offset; - spin_lock_irqsave(&data->lock, flags); - - reg = readl(reg_addr); - if (assert) - writel(reg & ~BIT(offset), reg_addr); - else - writel(reg | BIT(offset), reg_addr); - - spin_unlock_irqrestore(&data->lock, flags); - - return 0; + return regmap_update_bits(data->map, offset, + BIT(bit), assert ? 0 : BIT(bit)); } static int meson_reset_assert(struct reset_controller_dev *rcdev, @@ -113,30 +108,42 @@ static const struct of_device_id meson_reset_dt_ids[] = { }; MODULE_DEVICE_TABLE(of, meson_reset_dt_ids); +static const struct regmap_config regmap_config = { + .reg_bits = 32, + .val_bits = 32, + .reg_stride = 4, +}; + static int meson_reset_probe(struct platform_device *pdev) { + struct device *dev = &pdev->dev; struct meson_reset *data; + void __iomem *base; - data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; - data->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(data->reg_base)) - return PTR_ERR(data->reg_base); + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); - data->param = of_device_get_match_data(&pdev->dev); + data->param = of_device_get_match_data(dev); if (!data->param) return -ENODEV; - spin_lock_init(&data->lock); + data->map = devm_regmap_init_mmio(dev, base, ®map_config); + if (IS_ERR(data->map)) + return dev_err_probe(dev, PTR_ERR(data->map), + "can't init regmap mmio region\n"); data->rcdev.owner = THIS_MODULE; - data->rcdev.nr_resets = data->param->reg_count * BITS_PER_REG; + data->rcdev.nr_resets = data->param->reg_count * BITS_PER_BYTE + * regmap_config.reg_stride; data->rcdev.ops = &meson_reset_ops; - data->rcdev.of_node = pdev->dev.of_node; + data->rcdev.of_node = dev->of_node; - return devm_reset_controller_register(&pdev->dev, &data->rcdev); + return devm_reset_controller_register(dev, &data->rcdev); } static struct platform_driver meson_reset_driver = {
To allow using the same driver for the main reset controller and the auxiliary ones embedded in the clock controllers, convert the the Amlogic reset driver to regmap. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> --- drivers/reset/reset-meson.c | 79 ++++++++++++++++++++----------------- 1 file changed, 43 insertions(+), 36 deletions(-)