| Message ID | 20240819185734.372469-1-Frank.Li@nxp.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v3,1/1] dt-bindings: extcon: ptn5150: add child node port | expand |
On Mon, Aug 19, 2024 at 02:57:34PM -0400, Frank Li wrote: > Add child node 'port' to allow connect to usb controller to do role-switch > if id pin of ptn5150 have not connected to chip's usb ID function pin. > ... > required: > - compatible > - interrupts > @@ -58,5 +63,12 @@ examples: > interrupt-parent = <&msmgpio>; > interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; > vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; > + > + port { > + endpoint { Indentation is mixed up here. > + remote-endpoint = <&usb1_drd_sw>; > + }; > + }; > + Drop blank line. > }; > }; > -- > 2.34.1 >
diff --git a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml index d5cfa32ea52dd..0f61cd64e4bc0 100644 --- a/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml +++ b/Documentation/devicetree/bindings/extcon/extcon-ptn5150.yaml @@ -37,6 +37,11 @@ properties: GPIO pin (output) used to control VBUS. If skipped, no such control takes place. + port: + $ref: /schemas/graph.yaml#/properties/port + description: + A port node to link the usb controller for the dual role switch. + required: - compatible - interrupts @@ -58,5 +63,12 @@ examples: interrupt-parent = <&msmgpio>; interrupts = <78 IRQ_TYPE_LEVEL_HIGH>; vbus-gpios = <&msmgpio 148 GPIO_ACTIVE_HIGH>; + + port { + endpoint { + remote-endpoint = <&usb1_drd_sw>; + }; + }; + }; };
Add child node 'port' to allow connect to usb controller to do role-switch if id pin of ptn5150 have not connected to chip's usb ID function pin. Fix below warning: arch/arm64/boot/dts/freescale/imx8mn-var-som-symphony.dtb: typec@3d: 'port' does not match any of the regexes: 'pinctrl-[0-9]+' from schema $id: http://devicetree.org/schemas/extcon/extcon-ptn5150.yaml Signed-off-by: Frank Li <Frank.Li@nxp.com> --- Change from v2 to v3 - only add port to existed example. Change from v1 to v2 - add example for id pin have not connect to main chip's id example. - commit 095b96b2b fix "port" warning, but add new warning "connector" is not exist. And follow commit revert this change. 690085d866f08 Revert "arm64: dts: imx8mn-var-som-symphony: Describe the USB-C connector - I have not board in hand to debug why "connector" is not work. --- .../devicetree/bindings/extcon/extcon-ptn5150.yaml | 12 ++++++++++++ 1 file changed, 12 insertions(+)