Message ID | 20240820051635.25049-1-max.chou@realtek.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | [V2,RESEND] Bluetooth: btrtl: Add the support for RTL8922A | expand |
Context | Check | Description |
---|---|---|
tedd_an/pre-ci_am | fail | error: patch failed: drivers/bluetooth/btrtl.c:1286 error: drivers/bluetooth/btrtl.c: patch does not apply error: patch failed: drivers/bluetooth/btusb.c:540 error: drivers/bluetooth/btusb.c: patch does not apply hint: Use 'git am --show-current-patch' to see the failed patch |
Dear Max, Thank you for your patch. Am 20.08.24 um 07:16 schrieb max.chou@realtek.com: > From: Max Chou <max.chou@realtek.com> The article *the* in the commit message summary is uncommon. Maybe: Add support for RTL8922A > Add the support for RTL8922A BT controller on USB interface. Ditto. > The necessary firmware will be submitted to linux-firmware project. Maybe add the firmware file name `rtl8922au_fw`? If you could also document the device you tested with, that means which has that Bluetooth controller, that might be good to know too. > The device info from /sys/kernel/debug/usb/devices as below. > > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > P: Vendor=0bda ProdID=8922 Rev= 0.00 > S: Manufacturer=Realtek > S: Product=Bluetooth Radio > S: SerialNumber=00E04C885A01 > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > > Signed-off-by: Max Chou <max.chou@realtek.com> > --- > change: > v2: edit commit log > --- > drivers/bluetooth/btrtl.c | 16 ++++++++++++++++ > drivers/bluetooth/btusb.c | 13 +++++++++++++ > 2 files changed, 29 insertions(+) > > diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > index f2f37143c454..555c2964ec1b 100644 > --- a/drivers/bluetooth/btrtl.c > +++ b/drivers/bluetooth/btrtl.c > @@ -30,6 +30,7 @@ > #define RTL_ROM_LMP_8822B 0x8822 > #define RTL_ROM_LMP_8852A 0x8852 > #define RTL_ROM_LMP_8851B 0x8851 > +#define RTL_ROM_LMP_8922A 0x8922 > #define RTL_CONFIG_MAGIC 0x8723ab55 > > #define RTL_VSC_OP_COREDUMP 0xfcff > @@ -69,6 +70,7 @@ enum btrtl_chip_id { > CHIP_ID_8852B = 20, > CHIP_ID_8852C = 25, > CHIP_ID_8851B = 36, > + CHIP_ID_8922A = 44, > CHIP_ID_8852BT = 47, > }; > > @@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = { > .cfg_name = "rtl_bt/rtl8851bu_config", > .hw_info = "rtl8851bu" }, > > + /* 8922A */ > + { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB), > + .config_needed = false, > + .has_rom_version = true, > + .has_msft_ext = true, > + .fw_name = "rtl_bt/rtl8922au_fw", > + .cfg_name = "rtl_bt/rtl8922au_config", > + .hw_info = "rtl8922au" }, > + Why not sort it? > /* 8852BT/8852BE-VT */ > { IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB), > .config_needed = false, > @@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, > { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ > { RTL_ROM_LMP_8852A, 25 }, /* 8852C */ > { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ > + { RTL_ROM_LMP_8922A, 44 }, /* 8922A */ > { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */ > }; > > @@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev *hdev, > case RTL_ROM_LMP_8852A: > case RTL_ROM_LMP_8703B: > case RTL_ROM_LMP_8851B: > + case RTL_ROM_LMP_8922A: > err = btrtl_setup_rtl8723b(hdev, btrtl_dev); > break; > default: > @@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) > case CHIP_ID_8852B: > case CHIP_ID_8852C: > case CHIP_ID_8851B: > + case CHIP_ID_8922A: > case CHIP_ID_8852BT: Why not sort it? > set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); > set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); > @@ -1529,3 +1543,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin"); > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); > MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); > +MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin"); > +MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin"); > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > index acdba5d77694..8f931cfbac11 100644 > --- a/drivers/bluetooth/btusb.c > +++ b/drivers/bluetooth/btusb.c > @@ -540,6 +540,8 @@ static const struct usb_device_id quirks_table[] = { > BTUSB_WIDEBAND_SPEECH }, > { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | > BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, Why not sort it? > > /* Realtek 8852BE Bluetooth devices */ > { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | > @@ -564,6 +566,17 @@ static const struct usb_device_id quirks_table[] = { > /* Realtek 8852BT/8852BE-VT Bluetooth devices */ > { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | > BTUSB_WIDEBAND_SPEECH }, > + > + /* Realtek 8922AE Bluetooth devices */ > + { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > + { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, Why not sort it? > + { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK | > + BTUSB_WIDEBAND_SPEECH }, > + > /* Realtek Bluetooth devices */ > { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), > .driver_info = BTUSB_REALTEK },
This is an automated email and please do not reply to this email. Dear Submitter, Thank you for submitting the patches to the linux bluetooth mailing list. While preparing the CI tests, the patches you submitted couldn't be applied to the current HEAD of the repository. ----- Output ----- error: patch failed: drivers/bluetooth/btrtl.c:1286 error: drivers/bluetooth/btrtl.c: patch does not apply error: patch failed: drivers/bluetooth/btusb.c:540 error: drivers/bluetooth/btusb.c: patch does not apply hint: Use 'git am --show-current-patch' to see the failed patch Please resolve the issue and submit the patches again. --- Regards, Linux Bluetooth
Hi! Paul, Thanks for your feedback. I just send the V3 to fix auto build error because I did not rebase for the previous patch. Please check my comment for the questions. Thanks. > -----Original Message----- > From: Paul Menzel [mailto:pmenzel@molgen.mpg.de] > Sent: Tuesday, August 20, 2024 1:37 PM > To: Max Chou <max.chou@realtek.com> > Cc: Marcel Holtmann <marcel@holtmann.org>; Luiz Augusto von Dentz > <luiz.dentz@gmail.com>; linux-bluetooth@vger.kernel.org; > linux-kernel@vger.kernel.org; Hilda Wu <hildawu@realtek.com>; > alex_lu@realsil.com.cn; KidmanLee <kidman@realtek.com>; Karen Hsu > <karenhsu@realtek.com> > Subject: Re: [PATCH V2 RESEND] Bluetooth: btrtl: Add the support for > RTL8922A > > > External mail. > > > > Dear Max, > > > Thank you for your patch. > > Am 20.08.24 um 07:16 schrieb max.chou@realtek.com: > > From: Max Chou <max.chou@realtek.com> > There're some different chips in RTL8922A series. RTL8922AE and RTL8922AU are BT USB I/F, and this patch was committed for that. RTL8922AE-VR is BT UART I/F. I think " RTL8922A BT controller on USB interface." is more common. There is the same description for the past patch as well. > The article *the* in the commit message summary is uncommon. Maybe: > > Add support for RTL8922A > > > Add the support for RTL8922A BT controller on USB interface. > > Ditto. > > > The necessary firmware will be submitted to linux-firmware project. > For USB I/F, Realtek assigns the FW filename as rtlXXXXXu_fw.bin. When this patch is merged, I will submit the FW file to linux-firmware. > Maybe add the firmware file name `rtl8922au_fw`? > > If you could also document the device you tested with, that means which > has that Bluetooth controller, that might be good to know too. > > > The device info from /sys/kernel/debug/usb/devices as below. > > > > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 > > D: Ver= 1.00 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 > > P: Vendor=0bda ProdID=8922 Rev= 0.00 > > S: Manufacturer=Realtek > > S: Product=Bluetooth Radio > > S: SerialNumber=00E04C885A01 > > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=500mA > > I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms > > E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms > > I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms > > I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms > > I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms > > I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms > > I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms > > I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms > > I: If#= 1 Alt= 6 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb > > E: Ad=03(O) Atr=01(Isoc) MxPS= 63 Ivl=1ms > > E: Ad=83(I) Atr=01(Isoc) MxPS= 63 Ivl=1ms > > > > Signed-off-by: Max Chou <max.chou@realtek.com> > > --- > > change: > > v2: edit commit log > > --- > > drivers/bluetooth/btrtl.c | 16 ++++++++++++++++ > > drivers/bluetooth/btusb.c | 13 +++++++++++++ > > 2 files changed, 29 insertions(+) > > > > diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c > > index f2f37143c454..555c2964ec1b 100644 > > --- a/drivers/bluetooth/btrtl.c > > +++ b/drivers/bluetooth/btrtl.c > > @@ -30,6 +30,7 @@ > > #define RTL_ROM_LMP_8822B 0x8822 > > #define RTL_ROM_LMP_8852A 0x8852 > > #define RTL_ROM_LMP_8851B 0x8851 > > +#define RTL_ROM_LMP_8922A 0x8922 > > #define RTL_CONFIG_MAGIC 0x8723ab55 > > > > #define RTL_VSC_OP_COREDUMP 0xfcff > > @@ -69,6 +70,7 @@ enum btrtl_chip_id { > > CHIP_ID_8852B = 20, > > CHIP_ID_8852C = 25, > > CHIP_ID_8851B = 36, > > + CHIP_ID_8922A = 44, > > CHIP_ID_8852BT = 47, > > }; > > > > @@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = { > > .cfg_name = "rtl_bt/rtl8851bu_config", > > .hw_info = "rtl8851bu" }, > > > > + /* 8922A */ > > + { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB), > > + .config_needed = false, > > + .has_rom_version = true, > > + .has_msft_ext = true, > > + .fw_name = "rtl_bt/rtl8922au_fw", > > + .cfg_name = "rtl_bt/rtl8922au_config", > > + .hw_info = "rtl8922au" }, > > + > The chip id is 44 for RTL8922A. I exactly sort it. (between 36 and 47) > Why not sort it? > > > /* 8852BT/8852BE-VT */ > > { IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB), > > .config_needed = false, > > @@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev > *hdev, > > { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ > > { RTL_ROM_LMP_8852A, 25 }, /* 8852C */ > > { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ > > + { RTL_ROM_LMP_8922A, 44 }, /* 8922A */ > > { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */ > > }; > > > > @@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev > *hdev, > > case RTL_ROM_LMP_8852A: > > case RTL_ROM_LMP_8703B: > > case RTL_ROM_LMP_8851B: > > + case RTL_ROM_LMP_8922A: > > err = btrtl_setup_rtl8723b(hdev, btrtl_dev); > > break; > > default: > > @@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct > btrtl_device_info *btrtl_dev) > > case CHIP_ID_8852B: > > case CHIP_ID_8852C: > > case CHIP_ID_8851B: > > + case CHIP_ID_8922A: > > case CHIP_ID_8852BT: > In rtlbt_parse_firmware(), chip id 44 is between 36(8851B) and 47(8852BT). Hence, I just followed the sequence here as well. > Why not sort it? > > > set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); > > set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, > > &hdev->quirks); @@ -1529,3 +1543,5 @@ > MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin"); > > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); > > MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); > > MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); > > +MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin"); > > +MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin"); > > diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c > > index acdba5d77694..8f931cfbac11 100644 > > --- a/drivers/bluetooth/btusb.c > > +++ b/drivers/bluetooth/btusb.c > > @@ -540,6 +540,8 @@ static const struct usb_device_id quirks_table[] = { > > > BTUSB_WIDEBAND_SPEECH }, > > { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | > > > > BTUSB_WIDEBAND_SPEECH }, > > + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | > > + > > + BTUSB_WIDEBAND_SPEECH }, > > Why not sort it? > > > > > /* Realtek 8852BE Bluetooth devices */ > > { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | > @@ > > -564,6 +566,17 @@ static const struct usb_device_id quirks_table[] = { > > /* Realtek 8852BT/8852BE-VT Bluetooth devices */ > > { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | > > > > BTUSB_WIDEBAND_SPEECH }, > > + > > + /* Realtek 8922AE Bluetooth devices */ > > + { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK | > > + > BTUSB_WIDEBAND_SPEECH }, > > + { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK | > > + > BTUSB_WIDEBAND_SPEECH }, > > + { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK | > > + > > + BTUSB_WIDEBAND_SPEECH }, > > Why not sort it? > > > + { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK | > > + > > + BTUSB_WIDEBAND_SPEECH }, > > + > > /* Realtek Bluetooth devices */ > > { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), > > .driver_info = BTUSB_REALTEK },
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index f2f37143c454..555c2964ec1b 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -30,6 +30,7 @@ #define RTL_ROM_LMP_8822B 0x8822 #define RTL_ROM_LMP_8852A 0x8852 #define RTL_ROM_LMP_8851B 0x8851 +#define RTL_ROM_LMP_8922A 0x8922 #define RTL_CONFIG_MAGIC 0x8723ab55 #define RTL_VSC_OP_COREDUMP 0xfcff @@ -69,6 +70,7 @@ enum btrtl_chip_id { CHIP_ID_8852B = 20, CHIP_ID_8852C = 25, CHIP_ID_8851B = 36, + CHIP_ID_8922A = 44, CHIP_ID_8852BT = 47, }; @@ -309,6 +311,15 @@ static const struct id_table ic_id_table[] = { .cfg_name = "rtl_bt/rtl8851bu_config", .hw_info = "rtl8851bu" }, + /* 8922A */ + { IC_INFO(RTL_ROM_LMP_8922A, 0xa, 0xc, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .has_msft_ext = true, + .fw_name = "rtl_bt/rtl8922au_fw", + .cfg_name = "rtl_bt/rtl8922au_config", + .hw_info = "rtl8922au" }, + /* 8852BT/8852BE-VT */ { IC_INFO(RTL_ROM_LMP_8852A, 0x87, 0xc, HCI_USB), .config_needed = false, @@ -655,6 +666,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ { RTL_ROM_LMP_8852A, 25 }, /* 8852C */ { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ + { RTL_ROM_LMP_8922A, 44 }, /* 8922A */ { RTL_ROM_LMP_8852A, 47 }, /* 8852BT */ }; @@ -1255,6 +1267,7 @@ int btrtl_download_firmware(struct hci_dev *hdev, case RTL_ROM_LMP_8852A: case RTL_ROM_LMP_8703B: case RTL_ROM_LMP_8851B: + case RTL_ROM_LMP_8922A: err = btrtl_setup_rtl8723b(hdev, btrtl_dev); break; default: @@ -1286,6 +1299,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) case CHIP_ID_8852B: case CHIP_ID_8852C: case CHIP_ID_8851B: + case CHIP_ID_8922A: case CHIP_ID_8852BT: set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); @@ -1529,3 +1543,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852btu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw_v2.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8922au_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8922au_config.bin"); diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index acdba5d77694..8f931cfbac11 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -540,6 +540,8 @@ static const struct usb_device_id quirks_table[] = { BTUSB_WIDEBAND_SPEECH }, { USB_DEVICE(0x13d3, 0x3592), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe122), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, /* Realtek 8852BE Bluetooth devices */ { USB_DEVICE(0x0cb8, 0xc559), .driver_info = BTUSB_REALTEK | @@ -564,6 +566,17 @@ static const struct usb_device_id quirks_table[] = { /* Realtek 8852BT/8852BE-VT Bluetooth devices */ { USB_DEVICE(0x0bda, 0x8520), .driver_info = BTUSB_REALTEK | BTUSB_WIDEBAND_SPEECH }, + + /* Realtek 8922AE Bluetooth devices */ + { USB_DEVICE(0x0bda, 0x8922), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3617), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x13d3, 0x3616), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + { USB_DEVICE(0x0489, 0xe130), .driver_info = BTUSB_REALTEK | + BTUSB_WIDEBAND_SPEECH }, + /* Realtek Bluetooth devices */ { USB_VENDOR_AND_INTERFACE_INFO(0x0bda, 0xe0, 0x01, 0x01), .driver_info = BTUSB_REALTEK },