Message ID | 20240821064728.8642-2-zhaoqunqin@loongson.cn (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Add EDAC driver for loongson memory controller | expand |
On Wed, 2024-08-21 at 14:47 +0800, Zhao Qunqin wrote: > --- a/arch/loongarch/Kconfig > +++ b/arch/loongarch/Kconfig > @@ -179,6 +179,8 @@ config LOONGARCH > select PCI_QUIRKS > select PERF_USE_VMALLOC > select RTC_LIB > + select EDAC_SUPPORT > + select EDAC This line looks incorrect. It's forcing the users to enable EDAC even if they don't need it (for example using a non-ECC memory). And no other arch does this.
On 21/08/2024 08:47, Zhao Qunqin wrote: > From: zhaoqunqin <zhaoqunqin@loongson.cn> > > Report single bit errors (CE) only > > Signed-off-by: zhaoqunqin <zhaoqunqin@loongson.cn> > --- > arch/loongarch/Kconfig | 2 + > drivers/edac/Kconfig | 10 ++ > drivers/edac/Makefile | 1 + > drivers/edac/loongson_edac.c | 208 +++++++++++++++++++++++++++++++++++ > 4 files changed, 221 insertions(+) > create mode 100644 drivers/edac/loongson_edac.c > > diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig > index ddc042895..59d47053f 100644 > --- a/arch/loongarch/Kconfig > +++ b/arch/loongarch/Kconfig > @@ -179,6 +179,8 @@ config LOONGARCH > select PCI_QUIRKS > select PERF_USE_VMALLOC > select RTC_LIB > + select EDAC_SUPPORT > + select EDAC Nope, you should not select user-visible sumbols. > select SPARSE_IRQ > select SYSCTL_ARCH_UNALIGN_ALLOW > select SYSCTL_ARCH_UNALIGN_NO_WARN > diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig > index 16c8de505..60b1997f0 100644 > --- a/drivers/edac/Kconfig > +++ b/drivers/edac/Kconfig > @@ -573,5 +573,15 @@ config EDAC_VERSAL > Support injecting both correctable and uncorrectable errors > for debugging purposes. > > +config EDAC_LOONGSON > + tristate "Loongson EDAC" > + depends on LOONGARCH Missing compile test > + default m > + help > + Support for error detection and correction on the loongson memory > + controller. > + > + Report single bit errors (CE) only. > + Why double line? Drop > > endif # EDAC > diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile > index 4edfb83ff..d6f2cfe7e 100644 > --- a/drivers/edac/Makefile > +++ b/drivers/edac/Makefile > @@ -89,3 +89,4 @@ obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o > obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o > obj-$(CONFIG_EDAC_ZYNQMP) += zynqmp_edac.o > obj-$(CONFIG_EDAC_VERSAL) += versal_edac.o > +obj-$(CONFIG_EDAC_LOONGSON) += loongson_edac.o > diff --git a/drivers/edac/loongson_edac.c b/drivers/edac/loongson_edac.c > new file mode 100644 > index 000000000..c639c11ed > --- /dev/null > +++ b/drivers/edac/loongson_edac.c > @@ -0,0 +1,208 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (C) 2024 Loongson Technology Corporation Limited. > + */ > + > +#include <linux/edac.h> > +#include <linux/module.h> > +#include <linux/init.h> > +#include <linux/platform_device.h> > + > +#include "edac_module.h" > + > +enum ecc_index { > + ECC_SET = 0, > + ECC_RESERVED, > + ECC_COUNT, > + ECC_CS_COUNT, > + ECC_CODE, > + ECC_ADDR, > + ECC_DATA0, > + ECC_DATA1, > + ECC_DATA2, > + ECC_DATA3, > +}; > + > +static long idx; Drop, racy and useless. If you need ID, then use IDR but first explain what purpose does it serve. > + > +struct loongson_edac_pvt { > + volatile u64 *ecc_base; > + int last_ce_count; > +}; > + > +static void loongson_update_ce_count(struct mem_ctl_info *mci, > + int chan, > + int new) > +{ > + int add; > + struct loongson_edac_pvt *pvt = mci->pvt_info; > + > + add = new - pvt->last_ce_count; > + > + /* Store the new values */ > + pvt->last_ce_count = new; > + > + /* device resume or any other exceptions*/ > + if (add < 0) > + return; > + > + /*updated the edac core */ > + if (add != 0) { > + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add, > + 0, 0, 0, > + chan, 0, -1, "error", ""); > + edac_mc_printk(mci, KERN_INFO, "add: %d", add); > + } > +} > + > +static int loongson_read_ecc(struct mem_ctl_info *mci) > +{ > + u64 ecc; > + int cs = 0; > + struct loongson_edac_pvt *pvt = mci->pvt_info; > + > + if (!pvt->ecc_base) > + return pvt->last_ce_count; > + > + ecc = pvt->ecc_base[ECC_CS_COUNT]; > + cs += ecc & 0xff; // cs0 > + cs += (ecc >> 8) & 0xff; // cs1 > + cs += (ecc >> 16) & 0xff; // cs2 > + cs += (ecc >> 24) & 0xff; // cs3 > + > + return cs; > +} > + > +static void loongson_edac_check(struct mem_ctl_info *mci) > +{ > + loongson_update_ce_count(mci, 0, loongson_read_ecc(mci)); > +} > + > +static int get_dimm_config(struct mem_ctl_info *mci) > +{ > + u32 size, npages; > + struct dimm_info *dimm; > + > + /* size not used */ > + size = -1; > + npages = MiB_TO_PAGES(size); > + > + dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, > + 0, 0, 0); > + dimm->nr_pages = npages; > + snprintf(dimm->label, sizeof(dimm->label), > + "MC#%uChannel#%u_DIMM#%u", > + mci->mc_idx, 0, 0); > + dimm->grain = 8; > + > + return 0; > +} > + > +static void loongson_pvt_init(struct mem_ctl_info *mci, u64 *vbase) > +{ > + struct loongson_edac_pvt *pvt = mci->pvt_info; > + > + pvt->ecc_base = vbase; > + pvt->last_ce_count = loongson_read_ecc(mci); > +} > + > +static int loongson_edac_probe(struct platform_device *pdev) > +{ > + struct resource *rs; > + struct mem_ctl_info *mci; > + struct edac_mc_layer layers[2]; > + struct loongson_edac_pvt *pvt; > + u64 *vbase = NULL; > + > + rs = platform_get_resource(pdev, IORESOURCE_MEM, 0); > + if (!rs) > + return -EINVAL; > + if (rs->start) { > + vbase = devm_ioremap(&pdev->dev, rs->start, resource_size(rs)); Why you cannot use wrapper over these two calls - devm_ioremap_resource? > + if (!vbase) > + return -ENOMEM; > + } > + > + /* allocate a new MC control structure */ > + layers[0].type = EDAC_MC_LAYER_CHANNEL; > + layers[0].size = 1; > + layers[0].is_virt_csrow = false; > + layers[1].type = EDAC_MC_LAYER_SLOT; > + layers[1].size = 1; > + layers[1].is_virt_csrow = true; > + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); > + if (mci == NULL) > + return -ENOMEM; > + > + edac_dbg(0, "MC: mci = %p\n", mci); > + > + mci->mc_idx = idx++; > + mci->mtype_cap = MEM_FLAG_RDDR4; > + mci->edac_ctl_cap = EDAC_FLAG_NONE; > + mci->edac_cap = EDAC_FLAG_NONE; > + mci->mod_name = "loongson_edac.c"; > + mci->ctl_name = "loongson_edac_ctl"; > + mci->dev_name = "loongson_edac_dev"; > + mci->ctl_page_to_phys = NULL; > + mci->pdev = &pdev->dev; > + mci->error_desc.grain = 8; > + /* Set the function pointer to an actual operation function */ > + mci->edac_check = loongson_edac_check; > + > + loongson_pvt_init(mci, vbase); > + get_dimm_config(mci); > + > + if (edac_mc_add_mc(mci)) { > + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); > + edac_mc_free(mci); > + } > + return 0; > +} > + > +static int loongson_edac_remove(struct platform_device *pdev) > +{ > + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev); > + > + if (mci) { > + edac_mc_free(mci); > + return 0; > + } > + return -ENODEV; > +} > + > +static const struct of_device_id loongson_edac_of_match[] = { > + { .compatible = "loongson,ls-mc-edac", }, > + {} > +}; > +MODULE_DEVICE_TABLE(of, loongson_edac_of_match); > + > +static struct platform_driver loongson_edac_driver = { > + .probe = loongson_edac_probe, > + .remove = loongson_edac_remove, > + .driver = { > + .name = "ls-mc-edac", > + .owner = THIS_MODULE, Drop... that's ancient code. > + .of_match_table = loongson_edac_of_match, > + }, > +}; > + > +static int __init loongson_edac_init(void) > +{ > + /* poll only */ > + edac_op_state = EDAC_OPSTATE_POLL; Drop, unused. Clean your driver before posting it. > + > + return platform_driver_register(&loongson_edac_driver); > +} > + > +static void __exit loongson_edac_exit(void) > +{ > + platform_driver_unregister(&loongson_edac_driver); > +} > + > +module_init(loongson_edac_init); > +module_exit(loongson_edac_exit); module_platform_driver > +module_param(edac_op_state, int, 0444); Drop > + > +MODULE_LICENSE("GPL"); > +MODULE_AUTHOR("Zhao Qunqin <zhaoqunqin@loongson.cn>\n"); > +MODULE_DESCRIPTION("EDAC driver for loongson memory controller"); Best regards, Krzysztof
Hi Zhao, kernel test robot noticed the following build errors: [auto build test ERROR on ras/edac-for-next] [also build test ERROR on robh/for-next linus/master v6.11-rc4 next-20240821] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Zhao-Qunqin/Loongarch-EDAC-driver-for-loongson-memory-controller/20240821-145127 base: https://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next patch link: https://lore.kernel.org/r/20240821064728.8642-2-zhaoqunqin%40loongson.cn patch subject: [PATCH v1 1/2] Loongarch: EDAC driver for loongson memory controller config: loongarch-allmodconfig (https://download.01.org/0day-ci/archive/20240822/202408220634.Irq2TUcL-lkp@intel.com/config) compiler: loongarch64-linux-gcc (GCC) 14.1.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240822/202408220634.Irq2TUcL-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202408220634.Irq2TUcL-lkp@intel.com/ All errors (new ones prefixed by >>): drivers/edac/loongson_edac.c: In function 'get_dimm_config': >> drivers/edac/loongson_edac.c:90:16: error: implicit declaration of function 'EDAC_DIMM_PTR' [-Wimplicit-function-declaration] 90 | dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, | ^~~~~~~~~~~~~ >> drivers/edac/loongson_edac.c:90:14: error: assignment to 'struct dimm_info *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 90 | dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, | ^ drivers/edac/loongson_edac.c: At top level: >> drivers/edac/loongson_edac.c:181:27: error: initialization of 'void (*)(struct platform_device *)' from incompatible pointer type 'int (*)(struct platform_device *)' [-Wincompatible-pointer-types] 181 | .remove = loongson_edac_remove, | ^~~~~~~~~~~~~~~~~~~~ drivers/edac/loongson_edac.c:181:27: note: (near initialization for 'loongson_edac_driver.<anonymous>.remove') vim +/EDAC_DIMM_PTR +90 drivers/edac/loongson_edac.c 80 81 static int get_dimm_config(struct mem_ctl_info *mci) 82 { 83 u32 size, npages; 84 struct dimm_info *dimm; 85 86 /* size not used */ 87 size = -1; 88 npages = MiB_TO_PAGES(size); 89 > 90 dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 91 0, 0, 0); 92 dimm->nr_pages = npages; 93 snprintf(dimm->label, sizeof(dimm->label), 94 "MC#%uChannel#%u_DIMM#%u", 95 mci->mc_idx, 0, 0); 96 dimm->grain = 8; 97 98 return 0; 99 } 100 101 static void loongson_pvt_init(struct mem_ctl_info *mci, u64 *vbase) 102 { 103 struct loongson_edac_pvt *pvt = mci->pvt_info; 104 105 pvt->ecc_base = vbase; 106 pvt->last_ce_count = loongson_read_ecc(mci); 107 } 108 109 static int loongson_edac_probe(struct platform_device *pdev) 110 { 111 struct resource *rs; 112 struct mem_ctl_info *mci; 113 struct edac_mc_layer layers[2]; 114 struct loongson_edac_pvt *pvt; 115 u64 *vbase = NULL; 116 117 rs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 118 if (!rs) 119 return -EINVAL; 120 if (rs->start) { 121 vbase = devm_ioremap(&pdev->dev, rs->start, resource_size(rs)); 122 if (!vbase) 123 return -ENOMEM; 124 } 125 126 /* allocate a new MC control structure */ 127 layers[0].type = EDAC_MC_LAYER_CHANNEL; 128 layers[0].size = 1; 129 layers[0].is_virt_csrow = false; 130 layers[1].type = EDAC_MC_LAYER_SLOT; 131 layers[1].size = 1; 132 layers[1].is_virt_csrow = true; 133 mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); 134 if (mci == NULL) 135 return -ENOMEM; 136 137 edac_dbg(0, "MC: mci = %p\n", mci); 138 139 mci->mc_idx = idx++; 140 mci->mtype_cap = MEM_FLAG_RDDR4; 141 mci->edac_ctl_cap = EDAC_FLAG_NONE; 142 mci->edac_cap = EDAC_FLAG_NONE; 143 mci->mod_name = "loongson_edac.c"; 144 mci->ctl_name = "loongson_edac_ctl"; 145 mci->dev_name = "loongson_edac_dev"; 146 mci->ctl_page_to_phys = NULL; 147 mci->pdev = &pdev->dev; 148 mci->error_desc.grain = 8; 149 /* Set the function pointer to an actual operation function */ 150 mci->edac_check = loongson_edac_check; 151 152 loongson_pvt_init(mci, vbase); 153 get_dimm_config(mci); 154 155 if (edac_mc_add_mc(mci)) { 156 edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); 157 edac_mc_free(mci); 158 } 159 return 0; 160 } 161 162 static int loongson_edac_remove(struct platform_device *pdev) 163 { 164 struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev); 165 166 if (mci) { 167 edac_mc_free(mci); 168 return 0; 169 } 170 return -ENODEV; 171 } 172 173 static const struct of_device_id loongson_edac_of_match[] = { 174 { .compatible = "loongson,ls-mc-edac", }, 175 {} 176 }; 177 MODULE_DEVICE_TABLE(of, loongson_edac_of_match); 178 179 static struct platform_driver loongson_edac_driver = { 180 .probe = loongson_edac_probe, > 181 .remove = loongson_edac_remove, 182 .driver = { 183 .name = "ls-mc-edac", 184 .owner = THIS_MODULE, 185 .of_match_table = loongson_edac_of_match, 186 }, 187 }; 188
Hi Zhao,
kernel test robot noticed the following build warnings:
[auto build test WARNING on ras/edac-for-next]
[also build test WARNING on robh/for-next linus/master v6.11-rc4 next-20240821]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Zhao-Qunqin/Loongarch-EDAC-driver-for-loongson-memory-controller/20240821-145127
base: https://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next
patch link: https://lore.kernel.org/r/20240821064728.8642-2-zhaoqunqin%40loongson.cn
patch subject: [PATCH v1 1/2] Loongarch: EDAC driver for loongson memory controller
config: loongarch-kismet-CONFIG_EDAC-CONFIG_LOONGARCH-0-0 (https://download.01.org/0day-ci/archive/20240822/202408221024.FpH0yAEh-lkp@intel.com/config)
reproduce: (https://download.01.org/0day-ci/archive/20240822/202408221024.FpH0yAEh-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202408221024.FpH0yAEh-lkp@intel.com/
kismet warnings: (new ones prefixed by >>)
>> kismet: WARNING: unmet direct dependencies detected for EDAC when selected by LOONGARCH
WARNING: unmet direct dependencies detected for EDAC
Depends on [n]: HAS_IOMEM [=y] && EDAC_SUPPORT [=y] && RAS [=n]
Selected by [y]:
- LOONGARCH [=y]
Hi Zhao, kernel test robot noticed the following build warnings: [auto build test WARNING on ras/edac-for-next] [also build test WARNING on robh/for-next linus/master v6.11-rc4 next-20240822] [If your patch is applied to the wrong git tree, kindly drop us a note. And when submitting patch, we suggest to use '--base' as documented in https://git-scm.com/docs/git-format-patch#_base_tree_information] url: https://github.com/intel-lab-lkp/linux/commits/Zhao-Qunqin/Loongarch-EDAC-driver-for-loongson-memory-controller/20240821-145127 base: https://git.kernel.org/pub/scm/linux/kernel/git/ras/ras.git edac-for-next patch link: https://lore.kernel.org/r/20240821064728.8642-2-zhaoqunqin%40loongson.cn patch subject: [PATCH v1 1/2] Loongarch: EDAC driver for loongson memory controller config: loongarch-loongson3_defconfig (https://download.01.org/0day-ci/archive/20240823/202408231055.okLH0uuC-lkp@intel.com/config) compiler: loongarch64-linux-gcc (GCC) 13.3.0 reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240823/202408231055.okLH0uuC-lkp@intel.com/reproduce) If you fix the issue in a separate patch/commit (i.e. not just a new version of the same patch/commit), kindly add following tags | Reported-by: kernel test robot <lkp@intel.com> | Closes: https://lore.kernel.org/oe-kbuild-all/202408231055.okLH0uuC-lkp@intel.com/ All warnings (new ones prefixed by >>): drivers/edac/loongson_edac.c: In function 'get_dimm_config': drivers/edac/loongson_edac.c:90:16: error: implicit declaration of function 'EDAC_DIMM_PTR' [-Werror=implicit-function-declaration] 90 | dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, | ^~~~~~~~~~~~~ >> drivers/edac/loongson_edac.c:90:14: warning: assignment to 'struct dimm_info *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 90 | dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, | ^ drivers/edac/loongson_edac.c: At top level: drivers/edac/loongson_edac.c:181:27: error: initialization of 'void (*)(struct platform_device *)' from incompatible pointer type 'int (*)(struct platform_device *)' [-Werror=incompatible-pointer-types] 181 | .remove = loongson_edac_remove, | ^~~~~~~~~~~~~~~~~~~~ drivers/edac/loongson_edac.c:181:27: note: (near initialization for 'loongson_edac_driver.<anonymous>.remove') cc1: some warnings being treated as errors vim +90 drivers/edac/loongson_edac.c 80 81 static int get_dimm_config(struct mem_ctl_info *mci) 82 { 83 u32 size, npages; 84 struct dimm_info *dimm; 85 86 /* size not used */ 87 size = -1; 88 npages = MiB_TO_PAGES(size); 89 > 90 dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, 91 0, 0, 0); 92 dimm->nr_pages = npages; 93 snprintf(dimm->label, sizeof(dimm->label), 94 "MC#%uChannel#%u_DIMM#%u", 95 mci->mc_idx, 0, 0); 96 dimm->grain = 8; 97 98 return 0; 99 } 100
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig index ddc042895..59d47053f 100644 --- a/arch/loongarch/Kconfig +++ b/arch/loongarch/Kconfig @@ -179,6 +179,8 @@ config LOONGARCH select PCI_QUIRKS select PERF_USE_VMALLOC select RTC_LIB + select EDAC_SUPPORT + select EDAC select SPARSE_IRQ select SYSCTL_ARCH_UNALIGN_ALLOW select SYSCTL_ARCH_UNALIGN_NO_WARN diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig index 16c8de505..60b1997f0 100644 --- a/drivers/edac/Kconfig +++ b/drivers/edac/Kconfig @@ -573,5 +573,15 @@ config EDAC_VERSAL Support injecting both correctable and uncorrectable errors for debugging purposes. +config EDAC_LOONGSON + tristate "Loongson EDAC" + depends on LOONGARCH + default m + help + Support for error detection and correction on the loongson memory + controller. + + Report single bit errors (CE) only. + endif # EDAC diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile index 4edfb83ff..d6f2cfe7e 100644 --- a/drivers/edac/Makefile +++ b/drivers/edac/Makefile @@ -89,3 +89,4 @@ obj-$(CONFIG_EDAC_DMC520) += dmc520_edac.o obj-$(CONFIG_EDAC_NPCM) += npcm_edac.o obj-$(CONFIG_EDAC_ZYNQMP) += zynqmp_edac.o obj-$(CONFIG_EDAC_VERSAL) += versal_edac.o +obj-$(CONFIG_EDAC_LOONGSON) += loongson_edac.o diff --git a/drivers/edac/loongson_edac.c b/drivers/edac/loongson_edac.c new file mode 100644 index 000000000..c639c11ed --- /dev/null +++ b/drivers/edac/loongson_edac.c @@ -0,0 +1,208 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2024 Loongson Technology Corporation Limited. + */ + +#include <linux/edac.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/platform_device.h> + +#include "edac_module.h" + +enum ecc_index { + ECC_SET = 0, + ECC_RESERVED, + ECC_COUNT, + ECC_CS_COUNT, + ECC_CODE, + ECC_ADDR, + ECC_DATA0, + ECC_DATA1, + ECC_DATA2, + ECC_DATA3, +}; + +static long idx; + +struct loongson_edac_pvt { + volatile u64 *ecc_base; + int last_ce_count; +}; + +static void loongson_update_ce_count(struct mem_ctl_info *mci, + int chan, + int new) +{ + int add; + struct loongson_edac_pvt *pvt = mci->pvt_info; + + add = new - pvt->last_ce_count; + + /* Store the new values */ + pvt->last_ce_count = new; + + /* device resume or any other exceptions*/ + if (add < 0) + return; + + /*updated the edac core */ + if (add != 0) { + edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, add, + 0, 0, 0, + chan, 0, -1, "error", ""); + edac_mc_printk(mci, KERN_INFO, "add: %d", add); + } +} + +static int loongson_read_ecc(struct mem_ctl_info *mci) +{ + u64 ecc; + int cs = 0; + struct loongson_edac_pvt *pvt = mci->pvt_info; + + if (!pvt->ecc_base) + return pvt->last_ce_count; + + ecc = pvt->ecc_base[ECC_CS_COUNT]; + cs += ecc & 0xff; // cs0 + cs += (ecc >> 8) & 0xff; // cs1 + cs += (ecc >> 16) & 0xff; // cs2 + cs += (ecc >> 24) & 0xff; // cs3 + + return cs; +} + +static void loongson_edac_check(struct mem_ctl_info *mci) +{ + loongson_update_ce_count(mci, 0, loongson_read_ecc(mci)); +} + +static int get_dimm_config(struct mem_ctl_info *mci) +{ + u32 size, npages; + struct dimm_info *dimm; + + /* size not used */ + size = -1; + npages = MiB_TO_PAGES(size); + + dimm = EDAC_DIMM_PTR(mci->layers, mci->dimms, mci->n_layers, + 0, 0, 0); + dimm->nr_pages = npages; + snprintf(dimm->label, sizeof(dimm->label), + "MC#%uChannel#%u_DIMM#%u", + mci->mc_idx, 0, 0); + dimm->grain = 8; + + return 0; +} + +static void loongson_pvt_init(struct mem_ctl_info *mci, u64 *vbase) +{ + struct loongson_edac_pvt *pvt = mci->pvt_info; + + pvt->ecc_base = vbase; + pvt->last_ce_count = loongson_read_ecc(mci); +} + +static int loongson_edac_probe(struct platform_device *pdev) +{ + struct resource *rs; + struct mem_ctl_info *mci; + struct edac_mc_layer layers[2]; + struct loongson_edac_pvt *pvt; + u64 *vbase = NULL; + + rs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!rs) + return -EINVAL; + if (rs->start) { + vbase = devm_ioremap(&pdev->dev, rs->start, resource_size(rs)); + if (!vbase) + return -ENOMEM; + } + + /* allocate a new MC control structure */ + layers[0].type = EDAC_MC_LAYER_CHANNEL; + layers[0].size = 1; + layers[0].is_virt_csrow = false; + layers[1].type = EDAC_MC_LAYER_SLOT; + layers[1].size = 1; + layers[1].is_virt_csrow = true; + mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers, sizeof(*pvt)); + if (mci == NULL) + return -ENOMEM; + + edac_dbg(0, "MC: mci = %p\n", mci); + + mci->mc_idx = idx++; + mci->mtype_cap = MEM_FLAG_RDDR4; + mci->edac_ctl_cap = EDAC_FLAG_NONE; + mci->edac_cap = EDAC_FLAG_NONE; + mci->mod_name = "loongson_edac.c"; + mci->ctl_name = "loongson_edac_ctl"; + mci->dev_name = "loongson_edac_dev"; + mci->ctl_page_to_phys = NULL; + mci->pdev = &pdev->dev; + mci->error_desc.grain = 8; + /* Set the function pointer to an actual operation function */ + mci->edac_check = loongson_edac_check; + + loongson_pvt_init(mci, vbase); + get_dimm_config(mci); + + if (edac_mc_add_mc(mci)) { + edac_dbg(0, "MC: failed edac_mc_add_mc()\n"); + edac_mc_free(mci); + } + return 0; +} + +static int loongson_edac_remove(struct platform_device *pdev) +{ + struct mem_ctl_info *mci = edac_mc_del_mc(&pdev->dev); + + if (mci) { + edac_mc_free(mci); + return 0; + } + return -ENODEV; +} + +static const struct of_device_id loongson_edac_of_match[] = { + { .compatible = "loongson,ls-mc-edac", }, + {} +}; +MODULE_DEVICE_TABLE(of, loongson_edac_of_match); + +static struct platform_driver loongson_edac_driver = { + .probe = loongson_edac_probe, + .remove = loongson_edac_remove, + .driver = { + .name = "ls-mc-edac", + .owner = THIS_MODULE, + .of_match_table = loongson_edac_of_match, + }, +}; + +static int __init loongson_edac_init(void) +{ + /* poll only */ + edac_op_state = EDAC_OPSTATE_POLL; + + return platform_driver_register(&loongson_edac_driver); +} + +static void __exit loongson_edac_exit(void) +{ + platform_driver_unregister(&loongson_edac_driver); +} + +module_init(loongson_edac_init); +module_exit(loongson_edac_exit); +module_param(edac_op_state, int, 0444); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Zhao Qunqin <zhaoqunqin@loongson.cn>\n"); +MODULE_DESCRIPTION("EDAC driver for loongson memory controller");