[07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support

Message ID	eb39a5f3cefff2a1240a18a255dac090af16f223.1724159867.git.andrea.porta@suse.com (mailing list archive)
State	New, archived
Headers	show Return-Path: <linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org> From: Andrea della Porta <andrea.porta@suse.com> To: Andrea della Porta <andrea.porta@suse.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Florian Fainelli <florian.fainelli@broadcom.com>, Broadcom internal kernel review list <bcm-kernel-feedback-list@broadcom.com>, Linus Walleij <linus.walleij@linaro.org>, Catalin Marinas <catalin.marinas@arm.com>, Will Deacon <will@kernel.org>, Derek Kiernan <derek.kiernan@amd.com>, Dragan Cvetic <dragan.cvetic@amd.com>, Arnd Bergmann <arnd@arndb.de>, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Nicolas Ferre <nicolas.ferre@microchip.com>, Claudiu Beznea <claudiu.beznea@tuxon.dev>, "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Saravana Kannan <saravanak@google.com>, Bjorn Helgaas <bhelgaas@google.com>, linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-rpi-kernel@lists.infradead.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org, netdev@vger.kernel.org, linux-pci@vger.kernel.org, linux-arch@vger.kernel.org, Lee Jones <lee@kernel.org>, Andrew Lunn <andrew@lunn.ch>, Stefan Wahren <wahrenst@gmx.net> Subject: [PATCH 07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Date: Tue, 20 Aug 2024 16:36:09 +0200 Message-ID: <eb39a5f3cefff2a1240a18a255dac090af16f223.1724159867.git.andrea.porta@suse.com> In-Reply-To: <cover.1724159867.git.andrea.porta@suse.com> References: <cover.1724159867.git.andrea.porta@suse.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: list Sender: "linux-arm-kernel" <linux-arm-kernel-bounces@lists.infradead.org> Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org
Series	Add support for RaspberryPi RP1 PCI device using a DT overlay \| expand [00/11] Add support for RaspberryPi RP1 PCI device using a DT overlay [01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings [02/11] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings [03/11] PCI: of_property: Sanitize 32 bit PCI address parsed from DT [04/11] of: address: Preserve the flags portion on 1:1 dma-ranges mapping [05/11] vmlinux.lds.h: Preserve DTB sections from being discarded after init [06/11] clk: rp1: Add support for clocks provided by RP1 [07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support [08/11] misc: rp1: RaspberryPi RP1 misc driver [09/11] arm64: defconfig: Enable RP1 misc/clock/gpio drivers as built-in [10/11] net: macb: Add support for RP1's MACB variant [11/11] arm64: dts: rp1: Add support for MACB contained in RP1

diff --git a/MAINTAINERS b/MAINTAINERS index 4ce7b049d67e..67f460c36ea1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -19122,6 +19122,7 @@ S: Maintained F: Documentation/devicetree/bindings/clock/raspberrypi,rp1-clocks.yaml F: Documentation/devicetree/bindings/pinctrl/raspberrypi,rp1-gpio.yaml F: drivers/clk/clk-rp1.c +F: drivers/pinctrl/pinctrl-rp1.c F: include/dt-bindings/clock/rp1.h F: include/dt-bindings/misc/rp1.h diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index 7e4f93a3bc7a..18bb1a8bd102 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -565,6 +565,16 @@ config PINCTRL_MLXBF3 each pin. This driver can also be built as a module called pinctrl-mlxbf3. +config PINCTRL_RP1 + bool "Pinctrl driver for RP1" + select PINMUX + select PINCONF + select GENERIC_PINCONF + select GPIOLIB_IRQCHIP + help + Enable the gpio and pinctrl/mux driver for RaspberryPi RP1 + multi function device. + source "drivers/pinctrl/actions/Kconfig" source "drivers/pinctrl/aspeed/Kconfig" source "drivers/pinctrl/bcm/Kconfig" diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index cc809669405a..f1ca23b563f6 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_PIC32) += pinctrl-pic32.o obj-$(CONFIG_PINCTRL_PISTACHIO) += pinctrl-pistachio.o obj-$(CONFIG_PINCTRL_RK805) += pinctrl-rk805.o obj-$(CONFIG_PINCTRL_ROCKCHIP) += pinctrl-rockchip.o +obj-$(CONFIG_PINCTRL_RP1) += pinctrl-rp1.o obj-$(CONFIG_PINCTRL_SCMI) += pinctrl-scmi.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_ST) += pinctrl-st.o diff --git a/drivers/pinctrl/pinctrl-rp1.c b/drivers/pinctrl/pinctrl-rp1.c new file mode 100644 index 000000000000..c035d2014505 --- /dev/null +++ b/drivers/pinctrl/pinctrl-rp1.c @@ -0,0 +1,719 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Driver for Raspberry Pi RP1 GPIO unit + * + * Copyright (C) 2023 Raspberry Pi Ltd. + * + * This driver is inspired by: + * pinctrl-bcm2835.c, please see original file for copyright information + */ + +#include <linux/bitmap.h> +#include <linux/bitops.h> +#include <linux/bug.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/io.h> +#include <linux/irq.h> +#include <linux/irqdesc.h> +#include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of.h> +#include <linux/of_irq.h> +#include <linux/platform_device.h> +#include <linux/seq_file.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +#define MODULE_NAME "pinctrl-rp1" +#define RP1_NUM_GPIOS 54 +#define RP1_NUM_BANKS 3 + +#define RP1_RW_OFFSET 0x0000 +#define RP1_XOR_OFFSET (RP1_RW_OFFSET + 0x1000) +#define RP1_SET_OFFSET (RP1_RW_OFFSET + 0x2000) +#define RP1_CLR_OFFSET (RP1_RW_OFFSET + 0x3000) + +#define RP1_GPIO_REG_OFFSET 0x0000 +#define RP1_GPIO_STATUS (RP1_GPIO_REG_OFFSET + 0x0000) +#define RP1_GPIO_CTRL (RP1_GPIO_REG_OFFSET + 0x0004) + +#define RP1_GPIO_EVENTS_SHIFT_RAW 20 + +#define RP1_GPIO_CTRL_FUNCSEL_LSB 0 +#define RP1_GPIO_CTRL_FUNCSEL_MASK GENMASK(RP1_GPIO_CTRL_FUNCSEL_LSB + 4, \ + RP1_GPIO_CTRL_FUNCSEL_LSB) +#define RP1_GPIO_CTRL_OUTOVER_LSB 12 +#define RP1_GPIO_CTRL_OUTOVER_MASK GENMASK(RP1_GPIO_CTRL_OUTOVER_LSB + 1, \ + RP1_GPIO_CTRL_OUTOVER_LSB) +#define RP1_GPIO_CTRL_OEOVER_LSB 14 +#define RP1_GPIO_CTRL_OEOVER_MASK GENMASK(RP1_GPIO_CTRL_OEOVER_LSB + 1, \ + RP1_GPIO_CTRL_OEOVER_LSB) +#define RP1_GPIO_CTRL_INOVER_LSB 16 +#define RP1_GPIO_CTRL_INOVER_MASK GENMASK(RP1_GPIO_CTRL_INOVER_LSB + 1, \ + RP1_GPIO_CTRL_INOVER_LSB) +#define RP1_GPIO_CTRL_IRQEN_FALLING BIT(20) +#define RP1_GPIO_CTRL_IRQEN_RISING BIT(21) +#define RP1_GPIO_CTRL_IRQEN_LOW BIT(22) +#define RP1_GPIO_CTRL_IRQEN_HIGH BIT(23) +#define RP1_GPIO_CTRL_IRQEN_F_FALLING BIT(24) +#define RP1_GPIO_CTRL_IRQEN_F_RISING BIT(25) +#define RP1_GPIO_CTRL_IRQEN_F_LOW BIT(26) +#define RP1_GPIO_CTRL_IRQEN_F_HIGH BIT(27) +#define RP1_GPIO_CTRL_IRQRESET BIT(28) +#define RP1_GPIO_CTRL_IRQOVER_LSB 30 +#define RP1_GPIO_CTRL_IRQOVER_MASK GENMASK(RP1_GPIO_CTRL_IRQOVER_LSB + 1, \ + RP1_GPIO_CTRL_IRQOVER_LSB) + +#define RP1_INT_EDGE_FALLING BIT(0) +#define RP1_INT_EDGE_RISING BIT(1) +#define RP1_INT_LEVEL_LOW BIT(2) +#define RP1_INT_LEVEL_HIGH BIT(3) +#define RP1_INT_MASK GENMASK(3, 0) + +#define RP1_INT_EDGE_BOTH (RP1_INT_EDGE_FALLING | \ + RP1_INT_EDGE_RISING) + +enum { + RP1_PUD_OFF = 0, + RP1_PUD_DOWN = 1, + RP1_PUD_UP = 2, +}; + +#define RP1_FSEL_COUNT 9 + +#define RP1_FSEL_ALT0 0x00 +#define RP1_FSEL_GPIO 0x05 +#define RP1_FSEL_NONE 0x09 +#define RP1_FSEL_NONE_HW 0x1f + +enum { + RP1_DIR_OUTPUT = 0, + RP1_DIR_INPUT = 1, +}; + +enum { + RP1_OUTOVER_PERI = 0, + RP1_OUTOVER_INVPERI = 1, + RP1_OUTOVER_LOW = 2, + RP1_OUTOVER_HIGH = 3, +}; + +enum { + RP1_OEOVER_PERI = 0, + RP1_OEOVER_INVPERI = 1, + RP1_OEOVER_DISABLE = 2, + RP1_OEOVER_ENABLE = 3, +}; + +enum { + RP1_INOVER_PERI = 0, + RP1_INOVER_INVPERI = 1, + RP1_INOVER_LOW = 2, + RP1_INOVER_HIGH = 3, +}; + +#define RP1_RIO_OUT 0x00 +#define RP1_RIO_OE (RP1_RIO_OUT + 0x04) +#define RP1_RIO_IN (RP1_RIO_OUT + 0x08) + +#define RP1_PAD_SLEWFAST_LSB 0 +#define RP1_PAD_SLEWFAST_MASK BIT(RP1_PAD_SLEWFAST_LSB) +#define RP1_PAD_SCHMITT_LSB 1 +#define RP1_PAD_SCHMITT_MASK BIT(RP1_PAD_SCHMITT_LSB) +#define RP1_PAD_PULL_LSB 2 +#define RP1_PAD_PULL_MASK GENMASK(RP1_PAD_PULL_LSB + 1, \ + RP1_PAD_PULL_LSB) +#define RP1_PAD_DRIVE_LSB 4 +#define RP1_PAD_DRIVE_MASK GENMASK(RP1_PAD_DRIVE_LSB + 1, \ + RP1_PAD_DRIVE_LSB) +#define RP1_PAD_IN_ENABLE_LSB 6 +#define RP1_PAD_IN_ENABLE_MASK BIT(RP1_PAD_IN_ENABLE_LSB) +#define RP1_PAD_OUT_DISABLE_LSB 7 +#define RP1_PAD_OUT_DISABLE_MASK BIT(RP1_PAD_OUT_DISABLE_LSB) + +#define RP1_PAD_DRIVE_2MA 0x00000000 +#define RP1_PAD_DRIVE_4MA BIT(4) +#define RP1_PAD_DRIVE_8MA BIT(5) +#define RP1_PAD_DRIVE_12MA (RP1_PAD_DRIVE_4MA | \ + RP1_PAD_DRIVE_8MA) + +#define FIELD_SET(_reg, _mask, _val) \ + ({ \ + _reg &= ~(_mask); \ + _reg |= FIELD_PREP((_mask), (_val)); \ + }) + +#define FUNC(f) \ + [func_##f] = #f + +struct rp1_iobank_desc { + int min_gpio; + int num_gpios; + int gpio_offset; + int inte_offset; + int ints_offset; + int rio_offset; + int pads_offset; +}; + +struct rp1_pin_info { + u8 num; + u8 bank; + u8 offset; + u8 fsel; + u8 irq_type; + + void __iomem *gpio; + void __iomem *rio; + void __iomem *inte; + void __iomem *ints; + void __iomem *pad; +}; + +struct rp1_pinctrl { + struct device *dev; + void __iomem *gpio_base; + void __iomem *rio_base; + void __iomem *pads_base; + int irq[RP1_NUM_BANKS]; + struct rp1_pin_info pins[RP1_NUM_GPIOS]; + + struct pinctrl_dev *pctl_dev; + struct gpio_chip gpio_chip; + struct pinctrl_gpio_range gpio_range; + + raw_spinlock_t irq_lock[RP1_NUM_BANKS]; +}; + +const struct rp1_iobank_desc rp1_iobanks[RP1_NUM_BANKS] = { + /* gpio inte ints rio pads */ + { 0, 28, 0x0000, 0x011c, 0x0124, 0x0000, 0x0004 }, + { 28, 6, 0x4000, 0x411c, 0x4124, 0x4000, 0x4004 }, + { 34, 20, 0x8000, 0x811c, 0x8124, 0x8000, 0x8004 }, +}; + +static int rp1_pinconf_set(struct rp1_pin_info *pin, + unsigned int offset, unsigned long *configs, + unsigned int num_configs); + +static struct rp1_pin_info *rp1_get_pin(struct gpio_chip *chip, + unsigned int offset) +{ + struct rp1_pinctrl *pc = gpiochip_get_data(chip); + + if (pc && offset < RP1_NUM_GPIOS) + return &pc->pins[offset]; + return NULL; +} + +static void rp1_pad_update(struct rp1_pin_info *pin, u32 clr, u32 set) +{ + u32 padctrl = readl(pin->pad); + + padctrl &= ~clr; + padctrl |= set; + + writel(padctrl, pin->pad); +} + +static void rp1_input_enable(struct rp1_pin_info *pin, int value) +{ + rp1_pad_update(pin, RP1_PAD_IN_ENABLE_MASK, + value ? RP1_PAD_IN_ENABLE_MASK : 0); +} + +static void rp1_output_enable(struct rp1_pin_info *pin, int value) +{ + rp1_pad_update(pin, RP1_PAD_OUT_DISABLE_MASK, + value ? 0 : RP1_PAD_OUT_DISABLE_MASK); +} + +static u32 rp1_get_fsel(struct rp1_pin_info *pin) +{ + u32 ctrl = readl(pin->gpio + RP1_GPIO_CTRL); + u32 oeover = FIELD_GET(RP1_GPIO_CTRL_OEOVER_MASK, ctrl); + u32 fsel = FIELD_GET(RP1_GPIO_CTRL_FUNCSEL_MASK, ctrl); + + if (oeover != RP1_OEOVER_PERI || fsel >= RP1_FSEL_COUNT) + fsel = RP1_FSEL_NONE; + + return fsel; +} + +static void rp1_set_fsel(struct rp1_pin_info *pin, u32 fsel) +{ + u32 ctrl = readl(pin->gpio + RP1_GPIO_CTRL); + + if (fsel >= RP1_FSEL_COUNT) + fsel = RP1_FSEL_NONE_HW; + + rp1_input_enable(pin, 1); + rp1_output_enable(pin, 1); + + if (fsel == RP1_FSEL_NONE) { + FIELD_SET(ctrl, RP1_GPIO_CTRL_OEOVER_MASK, RP1_OEOVER_DISABLE); + } else { + FIELD_SET(ctrl, RP1_GPIO_CTRL_OUTOVER_MASK, RP1_OUTOVER_PERI); + FIELD_SET(ctrl, RP1_GPIO_CTRL_OEOVER_MASK, RP1_OEOVER_PERI); + } + + FIELD_SET(ctrl, RP1_GPIO_CTRL_FUNCSEL_MASK, fsel); + writel(ctrl, pin->gpio + RP1_GPIO_CTRL); +} + +static int rp1_get_dir(struct rp1_pin_info *pin) +{ + return !(readl(pin->rio + RP1_RIO_OE) & (1 << pin->offset)) ? + RP1_DIR_INPUT : RP1_DIR_OUTPUT; +} + +static void rp1_set_dir(struct rp1_pin_info *pin, bool is_input) +{ + int offset = is_input ? RP1_CLR_OFFSET : RP1_SET_OFFSET; + + writel(1 << pin->offset, pin->rio + RP1_RIO_OE + offset); +} + +static int rp1_get_value(struct rp1_pin_info *pin) +{ + return !!(readl(pin->rio + RP1_RIO_IN) & (1 << pin->offset)); +} + +static void rp1_set_value(struct rp1_pin_info *pin, int value) +{ + /* Assume the pin is already an output */ + writel(1 << pin->offset, + pin->rio + RP1_RIO_OUT + (value ? RP1_SET_OFFSET : RP1_CLR_OFFSET)); +} + +static int rp1_gpio_get(struct gpio_chip *chip, unsigned int offset) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + int ret; + + if (!pin) + return -EINVAL; + + ret = rp1_get_value(pin); + + return ret; +} + +static void rp1_gpio_set(struct gpio_chip *chip, unsigned int offset, int value) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + + if (pin) + rp1_set_value(pin, value); +} + +static int rp1_gpio_get_direction(struct gpio_chip *chip, unsigned int offset) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + u32 fsel; + + if (!pin) + return -EINVAL; + + fsel = rp1_get_fsel(pin); + if (fsel != RP1_FSEL_GPIO) + return -EINVAL; + + return (rp1_get_dir(pin) == RP1_DIR_OUTPUT) ? + GPIO_LINE_DIRECTION_OUT : + GPIO_LINE_DIRECTION_IN; +} + +static int rp1_gpio_direction_input(struct gpio_chip *chip, unsigned int offset) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + + if (!pin) + return -EINVAL; + rp1_set_dir(pin, RP1_DIR_INPUT); + rp1_set_fsel(pin, RP1_FSEL_GPIO); + + return 0; +} + +static int rp1_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, + int value) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + + if (!pin) + return -EINVAL; + rp1_set_value(pin, value); + rp1_set_dir(pin, RP1_DIR_OUTPUT); + rp1_set_fsel(pin, RP1_FSEL_GPIO); + + return 0; +} + +static int rp1_gpio_set_config(struct gpio_chip *chip, unsigned int offset, + unsigned long config) +{ + struct rp1_pin_info *pin = rp1_get_pin(chip, offset); + unsigned long configs[] = { config }; + + return rp1_pinconf_set(pin, offset, configs, + ARRAY_SIZE(configs)); +} + +static const struct gpio_chip rp1_gpio_chip = { + .label = MODULE_NAME, + .owner = THIS_MODULE, + .request = gpiochip_generic_request, + .free = gpiochip_generic_free, + .direction_input = rp1_gpio_direction_input, + .direction_output = rp1_gpio_direction_output, + .get_direction = rp1_gpio_get_direction, + .get = rp1_gpio_get, + .set = rp1_gpio_set, + .base = -1, + .set_config = rp1_gpio_set_config, + .ngpio = RP1_NUM_GPIOS, + .can_sleep = false, +}; + +static void rp1_gpio_irq_handler(struct irq_desc *desc) +{ + struct gpio_chip *chip = irq_desc_get_handler_data(desc); + struct irq_chip *host_chip = irq_desc_get_chip(desc); + struct rp1_pinctrl *pc = gpiochip_get_data(chip); + const struct rp1_iobank_desc *bank; + int irq = irq_desc_get_irq(desc); + unsigned long ints; + int bit_pos; + + if (pc->irq[0] == irq) + bank = &rp1_iobanks[0]; + else if (pc->irq[1] == irq) + bank = &rp1_iobanks[1]; + else + bank = &rp1_iobanks[2]; + + chained_irq_enter(host_chip, desc); + + ints = readl(pc->gpio_base + bank->ints_offset); + for_each_set_bit(bit_pos, &ints, 32) { + struct rp1_pin_info *pin = rp1_get_pin(chip, bit_pos); + + writel(RP1_GPIO_CTRL_IRQRESET, + pin->gpio + RP1_SET_OFFSET + RP1_GPIO_CTRL); + generic_handle_irq(irq_linear_revmap(pc->gpio_chip.irq.domain, + bank->gpio_offset + bit_pos)); + } + + chained_irq_exit(host_chip, desc); +} + +static void rp1_gpio_irq_config(struct rp1_pin_info *pin, bool enable) +{ + writel(1 << pin->offset, + pin->inte + (enable ? RP1_SET_OFFSET : RP1_CLR_OFFSET)); + if (!enable) + /* Clear any latched events */ + writel(RP1_GPIO_CTRL_IRQRESET, + pin->gpio + RP1_SET_OFFSET + RP1_GPIO_CTRL); +} + +static void rp1_gpio_irq_enable(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + unsigned int gpio = irqd_to_hwirq(data); + struct rp1_pin_info *pin = rp1_get_pin(chip, gpio); + + rp1_gpio_irq_config(pin, true); +} + +static void rp1_gpio_irq_disable(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + unsigned int gpio = irqd_to_hwirq(data); + struct rp1_pin_info *pin = rp1_get_pin(chip, gpio); + + rp1_gpio_irq_config(pin, false); +} + +static int rp1_irq_set_type(struct rp1_pin_info *pin, unsigned int type) +{ + u32 irq_flags; + + switch (type) { + case IRQ_TYPE_NONE: + irq_flags = 0; + break; + case IRQ_TYPE_EDGE_RISING: + irq_flags = RP1_INT_EDGE_RISING; + break; + case IRQ_TYPE_EDGE_FALLING: + irq_flags = RP1_INT_EDGE_FALLING; + break; + case IRQ_TYPE_EDGE_BOTH: + irq_flags = RP1_INT_EDGE_RISING | RP1_INT_EDGE_FALLING; + break; + case IRQ_TYPE_LEVEL_HIGH: + irq_flags = RP1_INT_LEVEL_HIGH; + break; + case IRQ_TYPE_LEVEL_LOW: + irq_flags = RP1_INT_LEVEL_LOW; + break; + + default: + return -EINVAL; + } + + /* Clear them all */ + writel(RP1_INT_MASK << RP1_GPIO_EVENTS_SHIFT_RAW, + pin->gpio + RP1_CLR_OFFSET + RP1_GPIO_CTRL); + /* Set those that are needed */ + writel(irq_flags << RP1_GPIO_EVENTS_SHIFT_RAW, + pin->gpio + RP1_SET_OFFSET + RP1_GPIO_CTRL); + pin->irq_type = type; + + return 0; +} + +static int rp1_gpio_irq_set_type(struct irq_data *data, unsigned int type) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + unsigned int gpio = irqd_to_hwirq(data); + struct rp1_pin_info *pin = rp1_get_pin(chip, gpio); + struct rp1_pinctrl *pc = gpiochip_get_data(chip); + int bank = pin->bank; + unsigned long flags; + int ret; + + raw_spin_lock_irqsave(&pc->irq_lock[bank], flags); + + ret = rp1_irq_set_type(pin, type); + if (!ret) { + if (type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(data, handle_edge_irq); + else + irq_set_handler_locked(data, handle_level_irq); + } + + raw_spin_unlock_irqrestore(&pc->irq_lock[bank], flags); + + return ret; +} + +static void rp1_gpio_irq_ack(struct irq_data *data) +{ + struct gpio_chip *chip = irq_data_get_irq_chip_data(data); + unsigned int gpio = irqd_to_hwirq(data); + struct rp1_pin_info *pin = rp1_get_pin(chip, gpio); + + /* Clear any latched events */ + writel(RP1_GPIO_CTRL_IRQRESET, pin->gpio + RP1_SET_OFFSET + RP1_GPIO_CTRL); +} + +static struct irq_chip rp1_gpio_irq_chip = { + .name = MODULE_NAME, + .irq_enable = rp1_gpio_irq_enable, + .irq_disable = rp1_gpio_irq_disable, + .irq_set_type = rp1_gpio_irq_set_type, + .irq_ack = rp1_gpio_irq_ack, + .irq_mask = rp1_gpio_irq_disable, + .irq_unmask = rp1_gpio_irq_enable, + .flags = IRQCHIP_IMMUTABLE, +}; + +static void rp1_pull_config_set(struct rp1_pin_info *pin, unsigned int arg) +{ + u32 padctrl = readl(pin->pad); + + FIELD_SET(padctrl, RP1_PAD_PULL_MASK, arg & 0x3); + writel(padctrl, pin->pad); +} + +static int rp1_pinconf_set(struct rp1_pin_info *pin, unsigned int offset, + unsigned long *configs, unsigned int num_configs) +{ + u32 param, arg; + int i; + + if (!pin) + return -EINVAL; + + for (i = 0; i < num_configs; i++) { + param = pinconf_to_config_param(configs[i]); + arg = pinconf_to_config_argument(configs[i]); + + switch (param) { + case PIN_CONFIG_BIAS_DISABLE: + rp1_pull_config_set(pin, RP1_PUD_OFF); + break; + + case PIN_CONFIG_BIAS_PULL_DOWN: + rp1_pull_config_set(pin, RP1_PUD_DOWN); + break; + + case PIN_CONFIG_BIAS_PULL_UP: + rp1_pull_config_set(pin, RP1_PUD_UP); + break; + + case PIN_CONFIG_INPUT_ENABLE: + rp1_input_enable(pin, arg); + break; + + case PIN_CONFIG_OUTPUT_ENABLE: + rp1_output_enable(pin, arg); + break; + + case PIN_CONFIG_OUTPUT: + rp1_set_value(pin, arg); + rp1_set_dir(pin, RP1_DIR_OUTPUT); + rp1_set_fsel(pin, RP1_FSEL_GPIO); + break; + + case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + rp1_pad_update(pin, RP1_PAD_SCHMITT_MASK, + arg ? RP1_PAD_SCHMITT_MASK : 0); + break; + + case PIN_CONFIG_SLEW_RATE: + rp1_pad_update(pin, RP1_PAD_SLEWFAST_MASK, + arg ? RP1_PAD_SLEWFAST_MASK : 0); + break; + + case PIN_CONFIG_DRIVE_STRENGTH: + switch (arg) { + case 2: + arg = RP1_PAD_DRIVE_2MA; + break; + case 4: + arg = RP1_PAD_DRIVE_4MA; + break; + case 8: + arg = RP1_PAD_DRIVE_8MA; + break; + case 12: + arg = RP1_PAD_DRIVE_12MA; + break; + default: + return -ENOTSUPP; + } + rp1_pad_update(pin, RP1_PAD_DRIVE_MASK, arg); + break; + + default: + return -ENOTSUPP; + + } /* switch param type */ + } /* for each config */ + + return 0; +} + +static const struct of_device_id rp1_pinctrl_match[] = { + { .compatible = "raspberrypi,rp1-gpio" }, + {}, +}; + +static int rp1_pinctrl_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + struct gpio_irq_chip *girq; + struct rp1_pinctrl *pc; + int err, i; + + pc = devm_kzalloc(dev, sizeof(*pc), GFP_KERNEL); + if (!pc) + return -ENOMEM; + + pc->dev = dev; + pc->gpio_chip = rp1_gpio_chip; + pc->gpio_chip.parent = dev; + + pc->gpio_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(pc->gpio_base)) { + dev_err(dev, "could not get GPIO IO memory\n"); + return PTR_ERR(pc->gpio_base); + } + + pc->rio_base = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(pc->rio_base)) { + dev_err(dev, "could not get RIO IO memory\n"); + return PTR_ERR(pc->rio_base); + } + + pc->pads_base = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(pc->pads_base)) { + dev_err(dev, "could not get PADS IO memory\n"); + return PTR_ERR(pc->pads_base); + } + + for (i = 0; i < RP1_NUM_BANKS; i++) { + const struct rp1_iobank_desc *bank = &rp1_iobanks[i]; + int j; + + for (j = 0; j < bank->num_gpios; j++) { + struct rp1_pin_info *pin = + &pc->pins[bank->min_gpio + j]; + + pin->num = bank->min_gpio + j; + pin->bank = i; + pin->offset = j; + + pin->gpio = pc->gpio_base + bank->gpio_offset + + j * sizeof(u32) * 2; + pin->inte = pc->gpio_base + bank->inte_offset; + pin->ints = pc->gpio_base + bank->ints_offset; + pin->rio = pc->rio_base + bank->rio_offset; + pin->pad = pc->pads_base + bank->pads_offset + + j * sizeof(u32); + } + + raw_spin_lock_init(&pc->irq_lock[i]); + } + + girq = &pc->gpio_chip.irq; + girq->chip = &rp1_gpio_irq_chip; + girq->parent_handler = rp1_gpio_irq_handler; + girq->num_parents = RP1_NUM_BANKS; + girq->parents = pc->irq; + girq->default_type = IRQ_TYPE_NONE; + girq->handler = handle_level_irq; + + /* + * Use the same handler for all groups: this is necessary + * since we use one gpiochip to cover all lines - the + * irq handler then needs to figure out which group and + * bank that was firing the IRQ and look up the per-group + * and bank data. + */ + for (i = 0; i < RP1_NUM_BANKS; i++) { + pc->irq[i] = irq_of_parse_and_map(np, i); + if (!pc->irq[i]) { + girq->num_parents = i; + break; + } + } + + platform_set_drvdata(pdev, pc); + + err = devm_gpiochip_add_data(dev, &pc->gpio_chip, pc); + if (err) { + dev_err(dev, "could not add GPIO chip\n"); + return err; + } + + return 0; +} + +static struct platform_driver rp1_pinctrl_driver = { + .probe = rp1_pinctrl_probe, + .driver = { + .name = MODULE_NAME, + .of_match_table = rp1_pinctrl_match, + .suppress_bind_attrs = true, + }, +}; +builtin_platform_driver(rp1_pinctrl_driver);

[07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support

Commit Message

Comments

Patch