diff mbox series

[v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks

Message ID 20240821055136.6858-1-ada@thorsis.com (mailing list archive)
State Not Applicable, archived
Headers show
Series [v2] ARM: dts: microchip: sam9x60: Fix rtc/rtt clocks | expand

Commit Message

Alexander Dahl Aug. 21, 2024, 5:51 a.m. UTC
The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
sourced from the 32.768 kHz crystal oscillator.

(The previously used Monitoring domain slow clock (MD_SLCK) is sourced
from an internal RC oscillator which is most probably not precise enough
for real time clock purposes.)

Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
---

Notes:
    Picked the wrong patch in the first try.  This v2 one has a slightly
    adapted commit message and more context below.
    
    This obviously requires a 32.768 kHz crystal oscillator to be present,
    but the sam9x60.dtsi does contain that, and the clock-controllers
    reference that, so I assume it's always present.
    
    /sys/kernel/debug/clk/clk_summary content excerpt before:
    
         slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
            md_slck                          4       4        0        32768       0          0     50000      Y      fffffea8.rtc                    no_connection_id
                                                                                                                      fffffe20.rtc                    no_connection_id
                                                                                                                      fffffe10.poweroff               no_connection_id
                                                                                                                      fffffe00.reset-controller       no_connection_id
                                                                                                                      timer@f8008000                  slow_clk
                                                                                                                      deviceless                      no_connection_id
    …
         slow_xtal                           0       0        0        32768       0          0     50000      Y   deviceless                      no_connection_id
            slow_osc                         0       0        0        32768       0          0     50000      Y      deviceless                      no_connection_id
               td_slck                       0       0        0        32768       0          0     50000      Y         deviceless                      no_connection_id
    
    And after:
    
         slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
            md_slck                          2       2        0        32768       0          0     50000      Y      fffffe10.poweroff               no_connection_id
                                                                                                                      fffffe00.reset-controller       no_connection_id
                                                                                                                      timer@f8008000                  slow_clk
                                                                                                                      deviceless                      no_connection_id
    …
         slow_xtal                           1       1        0        32768       0          0     50000      Y   deviceless                      no_connection_id
            slow_osc                         1       1        0        32768       0          0     50000      Y      deviceless                      no_connection_id
               td_slck                       2       2        0        32768       0          0     50000      Y         fffffea8.rtc                    no_connection_id
                                                                                                                         fffffe20.rtc                    no_connection_id
                                                                                                                         deviceless                      no_connection_id

 arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)


base-commit: 47ac09b91befbb6a235ab620c32af719f8208399

Comments

Alexandre Belloni Aug. 21, 2024, 11:52 p.m. UTC | #1
On 21/08/2024 07:51:36+0200, Alexander Dahl wrote:
> The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
> sourced from the 32.768 kHz crystal oscillator.
> 
> (The previously used Monitoring domain slow clock (MD_SLCK) is sourced
> from an internal RC oscillator which is most probably not precise enough
> for real time clock purposes.)
> 
> Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
> Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
> Signed-off-by: Alexander Dahl <ada@thorsis.com>
> ---
> 
> Notes:
>     Picked the wrong patch in the first try.  This v2 one has a slightly
>     adapted commit message and more context below.
>     
>     This obviously requires a 32.768 kHz crystal oscillator to be present,
>     but the sam9x60.dtsi does contain that, and the clock-controllers
>     reference that, so I assume it's always present.

The crystal is optional so this is going to break the boards that don't
have one. I don't really mind but this should probably be part of the
commit message.

This makes me realise that we always assumed the RC oscillator was
running at 32768 while the sam9x60 datasheet refers to it has a 32kHz
oscillator. However the RTC only has a 32768 divider...

>     
>     /sys/kernel/debug/clk/clk_summary content excerpt before:
>     
>          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
>             md_slck                          4       4        0        32768       0          0     50000      Y      fffffea8.rtc                    no_connection_id
>                                                                                                                       fffffe20.rtc                    no_connection_id
>                                                                                                                       fffffe10.poweroff               no_connection_id
>                                                                                                                       fffffe00.reset-controller       no_connection_id
>                                                                                                                       timer@f8008000                  slow_clk
>                                                                                                                       deviceless                      no_connection_id
>     …
>          slow_xtal                           0       0        0        32768       0          0     50000      Y   deviceless                      no_connection_id
>             slow_osc                         0       0        0        32768       0          0     50000      Y      deviceless                      no_connection_id
>                td_slck                       0       0        0        32768       0          0     50000      Y         deviceless                      no_connection_id
>     
>     And after:
>     
>          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
>             md_slck                          2       2        0        32768       0          0     50000      Y      fffffe10.poweroff               no_connection_id
>                                                                                                                       fffffe00.reset-controller       no_connection_id
>                                                                                                                       timer@f8008000                  slow_clk
>                                                                                                                       deviceless                      no_connection_id
>     …
>          slow_xtal                           1       1        0        32768       0          0     50000      Y   deviceless                      no_connection_id
>             slow_osc                         1       1        0        32768       0          0     50000      Y      deviceless                      no_connection_id
>                td_slck                       2       2        0        32768       0          0     50000      Y         fffffea8.rtc                    no_connection_id
>                                                                                                                          fffffe20.rtc                    no_connection_id
>                                                                                                                          deviceless                      no_connection_id
> 
>  arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> index 291540e5d81e..d077afd5024d 100644
> --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
> +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> @@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
>  				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
>  				reg = <0xfffffe20 0x20>;
>  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> -				clocks = <&clk32k 0>;
> +				clocks = <&clk32k 1>;
>  			};
>  
>  			pit: timer@fffffe40 {
> @@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
>  				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
>  				reg = <0xfffffea8 0x100>;
>  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> -				clocks = <&clk32k 0>;
> +				clocks = <&clk32k 1>;
>  			};
>  
>  			watchdog: watchdog@ffffff80 {
> 
> base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
> -- 
> 2.39.2
>
Alexander Dahl Aug. 22, 2024, 6:53 a.m. UTC | #2
Hello Alexandre,

Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:
> On 21/08/2024 07:51:36+0200, Alexander Dahl wrote:
> > The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
> > sourced from the 32.768 kHz crystal oscillator.
> > 
> > (The previously used Monitoring domain slow clock (MD_SLCK) is sourced
> > from an internal RC oscillator which is most probably not precise enough
> > for real time clock purposes.)
> > 
> > Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
> > Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
> > Signed-off-by: Alexander Dahl <ada@thorsis.com>
> > ---
> > 
> > Notes:
> >     Picked the wrong patch in the first try.  This v2 one has a slightly
> >     adapted commit message and more context below.
> >     
> >     This obviously requires a 32.768 kHz crystal oscillator to be present,
> >     but the sam9x60.dtsi does contain that, and the clock-controllers
> >     reference that, so I assume it's always present.
> 
> The crystal is optional so this is going to break the boards that don't
> have one. I don't really mind but this should probably be part of the
> commit message.

Okay right, according to the datasheet (Figure 27.1 SCKC Block
Diagram) you don't need that crystal, you can clear TD_OSCSEL and
td_slck runs from the internal rc then.  However, td_slck is always
present, it either sources from the internal slow rc oscillator or the
crystal oscillator.  And the datasheet says in section 29.1 (PMC):

    "The Slow Clock Controller (SCKC) selects the source of TD_SLCK
    (drives the real-time part (RTT/RTC)).  The source of MD_SLCK
    (drives the rest of the system controller: wake-up logic,
    watchdog, PMC, etc.) is always the slow RC oscillator."

md_slck and td_slck are both registered by the at91 sckc driver, and
the td_slck gets two parents in of_sam9x60_sckc_setup() when
registered by at91_clk_register_sam9x5_slow().  The parent can be
switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then,
correctly setting the OSCSEL bit.

The whole idea of the patch is giving the rtc/rtt td_slck as a parent
as documented in the datasheet.  I don't see how this should be
affected by the parents of td_slck?  Am I missing something?

> This makes me realise that we always assumed the RC oscillator was
> running at 32768 while the sam9x60 datasheet refers to it has a 32kHz
> oscillator. However the RTC only has a 32768 divider...

When sourced from the internal rc oscillator, this would mean the
output would be incorrect, right?  How could one prove this?

Greets
Alex

> 
> >     
> >     /sys/kernel/debug/clk/clk_summary content excerpt before:
> >     
> >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> >             md_slck                          4       4        0        32768       0          0     50000      Y      fffffea8.rtc                    no_connection_id
> >                                                                                                                       fffffe20.rtc                    no_connection_id
> >                                                                                                                       fffffe10.poweroff               no_connection_id
> >                                                                                                                       fffffe00.reset-controller       no_connection_id
> >                                                                                                                       timer@f8008000                  slow_clk
> >                                                                                                                       deviceless                      no_connection_id
> >     …
> >          slow_xtal                           0       0        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> >             slow_osc                         0       0        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> >                td_slck                       0       0        0        32768       0          0     50000      Y         deviceless                      no_connection_id
> >     
> >     And after:
> >     
> >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> >             md_slck                          2       2        0        32768       0          0     50000      Y      fffffe10.poweroff               no_connection_id
> >                                                                                                                       fffffe00.reset-controller       no_connection_id
> >                                                                                                                       timer@f8008000                  slow_clk
> >                                                                                                                       deviceless                      no_connection_id
> >     …
> >          slow_xtal                           1       1        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> >             slow_osc                         1       1        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> >                td_slck                       2       2        0        32768       0          0     50000      Y         fffffea8.rtc                    no_connection_id
> >                                                                                                                          fffffe20.rtc                    no_connection_id
> >                                                                                                                          deviceless                      no_connection_id
> > 
> >  arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
> >  1 file changed, 2 insertions(+), 2 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > index 291540e5d81e..d077afd5024d 100644
> > --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > @@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
> >  				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
> >  				reg = <0xfffffe20 0x20>;
> >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > -				clocks = <&clk32k 0>;
> > +				clocks = <&clk32k 1>;
> >  			};
> >  
> >  			pit: timer@fffffe40 {
> > @@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
> >  				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
> >  				reg = <0xfffffea8 0x100>;
> >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > -				clocks = <&clk32k 0>;
> > +				clocks = <&clk32k 1>;
> >  			};
> >  
> >  			watchdog: watchdog@ffffff80 {
> > 
> > base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
> > -- 
> > 2.39.2
> > 
> 
> -- 
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
Alexandre Belloni Aug. 22, 2024, 8:17 a.m. UTC | #3
On 22/08/2024 08:53:59+0200, Alexander Dahl wrote:
> Hello Alexandre,
> 
> Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:
> > On 21/08/2024 07:51:36+0200, Alexander Dahl wrote:
> > > The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
> > > sourced from the 32.768 kHz crystal oscillator.
> > > 
> > > (The previously used Monitoring domain slow clock (MD_SLCK) is sourced
> > > from an internal RC oscillator which is most probably not precise enough
> > > for real time clock purposes.)
> > > 
> > > Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
> > > Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
> > > Signed-off-by: Alexander Dahl <ada@thorsis.com>
> > > ---
> > > 
> > > Notes:
> > >     Picked the wrong patch in the first try.  This v2 one has a slightly
> > >     adapted commit message and more context below.
> > >     
> > >     This obviously requires a 32.768 kHz crystal oscillator to be present,
> > >     but the sam9x60.dtsi does contain that, and the clock-controllers
> > >     reference that, so I assume it's always present.
> > 
> > The crystal is optional so this is going to break the boards that don't
> > have one. I don't really mind but this should probably be part of the
> > commit message.
> 
> Okay right, according to the datasheet (Figure 27.1 SCKC Block
> Diagram) you don't need that crystal, you can clear TD_OSCSEL and
> td_slck runs from the internal rc then.  However, td_slck is always
> present, it either sources from the internal slow rc oscillator or the
> crystal oscillator.  And the datasheet says in section 29.1 (PMC):
> 
>     "The Slow Clock Controller (SCKC) selects the source of TD_SLCK
>     (drives the real-time part (RTT/RTC)).  The source of MD_SLCK
>     (drives the rest of the system controller: wake-up logic,
>     watchdog, PMC, etc.) is always the slow RC oscillator."
> 
> md_slck and td_slck are both registered by the at91 sckc driver, and
> the td_slck gets two parents in of_sam9x60_sckc_setup() when
> registered by at91_clk_register_sam9x5_slow().  The parent can be
> switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then,
> correctly setting the OSCSEL bit.
> 
> The whole idea of the patch is giving the rtc/rtt td_slck as a parent
> as documented in the datasheet.  I don't see how this should be
> affected by the parents of td_slck?  Am I missing something?
> 

You are right, I got confused because you were referring t the 32768 Hz
crystal in your commit message and though you aimed at selected the
parent of td_slck (and also, I didn't really work on the sam9x60).


> > This makes me realise that we always assumed the RC oscillator was
> > running at 32768 while the sam9x60 datasheet refers to it has a 32kHz
> > oscillator. However the RTC only has a 32768 divider...
> 
> When sourced from the internal rc oscillator, this would mean the
> output would be incorrect, right?  How could one prove this?


I guess you could have a look at how the RTC is drifting when selecting
the RC osc as the parent but it will anyway be way less precise than the
crystal so i'm not sure how you could get a conclusive result.

> 
> Greets
> Alex
> 
> > 
> > >     
> > >     /sys/kernel/debug/clk/clk_summary content excerpt before:
> > >     
> > >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> > >             md_slck                          4       4        0        32768       0          0     50000      Y      fffffea8.rtc                    no_connection_id
> > >                                                                                                                       fffffe20.rtc                    no_connection_id
> > >                                                                                                                       fffffe10.poweroff               no_connection_id
> > >                                                                                                                       fffffe00.reset-controller       no_connection_id
> > >                                                                                                                       timer@f8008000                  slow_clk
> > >                                                                                                                       deviceless                      no_connection_id
> > >     …
> > >          slow_xtal                           0       0        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> > >             slow_osc                         0       0        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> > >                td_slck                       0       0        0        32768       0          0     50000      Y         deviceless                      no_connection_id
> > >     
> > >     And after:
> > >     
> > >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> > >             md_slck                          2       2        0        32768       0          0     50000      Y      fffffe10.poweroff               no_connection_id
> > >                                                                                                                       fffffe00.reset-controller       no_connection_id
> > >                                                                                                                       timer@f8008000                  slow_clk
> > >                                                                                                                       deviceless                      no_connection_id
> > >     …
> > >          slow_xtal                           1       1        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> > >             slow_osc                         1       1        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> > >                td_slck                       2       2        0        32768       0          0     50000      Y         fffffea8.rtc                    no_connection_id
> > >                                                                                                                          fffffe20.rtc                    no_connection_id
> > >                                                                                                                          deviceless                      no_connection_id
> > > 
> > >  arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
> > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > index 291540e5d81e..d077afd5024d 100644
> > > --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > @@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
> > >  				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
> > >  				reg = <0xfffffe20 0x20>;
> > >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > > -				clocks = <&clk32k 0>;
> > > +				clocks = <&clk32k 1>;
> > >  			};
> > >  
> > >  			pit: timer@fffffe40 {
> > > @@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
> > >  				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
> > >  				reg = <0xfffffea8 0x100>;
> > >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > > -				clocks = <&clk32k 0>;
> > > +				clocks = <&clk32k 1>;
> > >  			};
> > >  
> > >  			watchdog: watchdog@ffffff80 {
> > > 
> > > base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
> > > -- 
> > > 2.39.2
> > > 
> > 
> > -- 
> > Alexandre Belloni, co-owner and COO, Bootlin
> > Embedded Linux and Kernel engineering
> > https://bootlin.com
Alexander Dahl Aug. 22, 2024, 10:25 a.m. UTC | #4
Hello Alexandre,

Am Thu, Aug 22, 2024 at 10:17:46AM +0200 schrieb Alexandre Belloni:
> On 22/08/2024 08:53:59+0200, Alexander Dahl wrote:
> > Hello Alexandre,
> > 
> > Am Thu, Aug 22, 2024 at 01:52:05AM +0200 schrieb Alexandre Belloni:
> > > On 21/08/2024 07:51:36+0200, Alexander Dahl wrote:
> > > > The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
> > > > sourced from the 32.768 kHz crystal oscillator.
> > > > 
> > > > (The previously used Monitoring domain slow clock (MD_SLCK) is sourced
> > > > from an internal RC oscillator which is most probably not precise enough
> > > > for real time clock purposes.)
> > > > 
> > > > Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
> > > > Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
> > > > Signed-off-by: Alexander Dahl <ada@thorsis.com>
> > > > ---
> > > > 
> > > > Notes:
> > > >     Picked the wrong patch in the first try.  This v2 one has a slightly
> > > >     adapted commit message and more context below.
> > > >     
> > > >     This obviously requires a 32.768 kHz crystal oscillator to be present,
> > > >     but the sam9x60.dtsi does contain that, and the clock-controllers
> > > >     reference that, so I assume it's always present.
> > > 
> > > The crystal is optional so this is going to break the boards that don't
> > > have one. I don't really mind but this should probably be part of the
> > > commit message.
> > 
> > Okay right, according to the datasheet (Figure 27.1 SCKC Block
> > Diagram) you don't need that crystal, you can clear TD_OSCSEL and
> > td_slck runs from the internal rc then.  However, td_slck is always
> > present, it either sources from the internal slow rc oscillator or the
> > crystal oscillator.  And the datasheet says in section 29.1 (PMC):
> > 
> >     "The Slow Clock Controller (SCKC) selects the source of TD_SLCK
> >     (drives the real-time part (RTT/RTC)).  The source of MD_SLCK
> >     (drives the rest of the system controller: wake-up logic,
> >     watchdog, PMC, etc.) is always the slow RC oscillator."
> > 
> > md_slck and td_slck are both registered by the at91 sckc driver, and
> > the td_slck gets two parents in of_sam9x60_sckc_setup() when
> > registered by at91_clk_register_sam9x5_slow().  The parent can be
> > switched by clk_sam9x5_slow_set_parent() from sam9x5_slow_ops then,
> > correctly setting the OSCSEL bit.
> > 
> > The whole idea of the patch is giving the rtc/rtt td_slck as a parent
> > as documented in the datasheet.  I don't see how this should be
> > affected by the parents of td_slck?  Am I missing something?
> > 
> 
> You are right, I got confused because you were referring t the 32768 Hz
> crystal in your commit message and though you aimed at selected the
> parent of td_slck (and also, I didn't really work on the sam9x60).

Thanks for confirming.

Should I reword the commit message then to make it easier to
understand?

> > > This makes me realise that we always assumed the RC oscillator was
> > > running at 32768 while the sam9x60 datasheet refers to it has a 32kHz
> > > oscillator. However the RTC only has a 32768 divider...
> > 
> > When sourced from the internal rc oscillator, this would mean the
> > output would be incorrect, right?  How could one prove this?
> 
> 
> I guess you could have a look at how the RTC is drifting when selecting
> the RC osc as the parent but it will anyway be way less precise than the
> crystal so i'm not sure how you could get a conclusive result.

I would have to look deeper into rtc for that.
Maybe in a calm minute. ;-)

Greets
Alex

> 
> > 
> > Greets
> > Alex
> > 
> > > 
> > > >     
> > > >     /sys/kernel/debug/clk/clk_summary content excerpt before:
> > > >     
> > > >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> > > >             md_slck                          4       4        0        32768       0          0     50000      Y      fffffea8.rtc                    no_connection_id
> > > >                                                                                                                       fffffe20.rtc                    no_connection_id
> > > >                                                                                                                       fffffe10.poweroff               no_connection_id
> > > >                                                                                                                       fffffe00.reset-controller       no_connection_id
> > > >                                                                                                                       timer@f8008000                  slow_clk
> > > >                                                                                                                       deviceless                      no_connection_id
> > > >     …
> > > >          slow_xtal                           0       0        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> > > >             slow_osc                         0       0        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> > > >                td_slck                       0       0        0        32768       0          0     50000      Y         deviceless                      no_connection_id
> > > >     
> > > >     And after:
> > > >     
> > > >          slow_rc_osc                         1       1        0        32768       93750000   0     50000      Y   deviceless                      no_connection_id
> > > >             md_slck                          2       2        0        32768       0          0     50000      Y      fffffe10.poweroff               no_connection_id
> > > >                                                                                                                       fffffe00.reset-controller       no_connection_id
> > > >                                                                                                                       timer@f8008000                  slow_clk
> > > >                                                                                                                       deviceless                      no_connection_id
> > > >     …
> > > >          slow_xtal                           1       1        0        32768       0          0     50000      Y   deviceless                      no_connection_id
> > > >             slow_osc                         1       1        0        32768       0          0     50000      Y      deviceless                      no_connection_id
> > > >                td_slck                       2       2        0        32768       0          0     50000      Y         fffffea8.rtc                    no_connection_id
> > > >                                                                                                                          fffffe20.rtc                    no_connection_id
> > > >                                                                                                                          deviceless                      no_connection_id
> > > > 
> > > >  arch/arm/boot/dts/microchip/sam9x60.dtsi | 4 ++--
> > > >  1 file changed, 2 insertions(+), 2 deletions(-)
> > > > 
> > > > diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > > index 291540e5d81e..d077afd5024d 100644
> > > > --- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > > +++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
> > > > @@ -1312,7 +1312,7 @@ rtt: rtc@fffffe20 {
> > > >  				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
> > > >  				reg = <0xfffffe20 0x20>;
> > > >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > > > -				clocks = <&clk32k 0>;
> > > > +				clocks = <&clk32k 1>;
> > > >  			};
> > > >  
> > > >  			pit: timer@fffffe40 {
> > > > @@ -1338,7 +1338,7 @@ rtc: rtc@fffffea8 {
> > > >  				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
> > > >  				reg = <0xfffffea8 0x100>;
> > > >  				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
> > > > -				clocks = <&clk32k 0>;
> > > > +				clocks = <&clk32k 1>;
> > > >  			};
> > > >  
> > > >  			watchdog: watchdog@ffffff80 {
> > > > 
> > > > base-commit: 47ac09b91befbb6a235ab620c32af719f8208399
> > > > -- 
> > > > 2.39.2
> > > > 
> > > 
> > > -- 
> > > Alexandre Belloni, co-owner and COO, Bootlin
> > > Embedded Linux and Kernel engineering
> > > https://bootlin.com
> 
> -- 
> Alexandre Belloni, co-owner and COO, Bootlin
> Embedded Linux and Kernel engineering
> https://bootlin.com
>
Claudiu Aug. 24, 2024, 5:28 p.m. UTC | #5
On 21.08.2024 08:51, Alexander Dahl wrote:
> The RTC and RTT peripherals use the "timing domain slow clock (TD_SLCK),
> sourced from the 32.768 kHz crystal oscillator.
> 
> (The previously used Monitoring domain slow clock (MD_SLCK) is sourced
> from an internal RC oscillator which is most probably not precise enough
> for real time clock purposes.)
> 
> Fixes: 1e5f532c2737 ("ARM: dts: at91: sam9x60: add device tree for soc and board")
> Fixes: 5f6b33f46346 ("ARM: dts: sam9x60: add rtt")
> Signed-off-by: Alexander Dahl <ada@thorsis.com>

Applied to at91-dt, thanks!
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/microchip/sam9x60.dtsi b/arch/arm/boot/dts/microchip/sam9x60.dtsi
index 291540e5d81e..d077afd5024d 100644
--- a/arch/arm/boot/dts/microchip/sam9x60.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x60.dtsi
@@ -1312,7 +1312,7 @@  rtt: rtc@fffffe20 {
 				compatible = "microchip,sam9x60-rtt", "atmel,at91sam9260-rtt";
 				reg = <0xfffffe20 0x20>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			pit: timer@fffffe40 {
@@ -1338,7 +1338,7 @@  rtc: rtc@fffffea8 {
 				compatible = "microchip,sam9x60-rtc", "atmel,at91sam9x5-rtc";
 				reg = <0xfffffea8 0x100>;
 				interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
-				clocks = <&clk32k 0>;
+				clocks = <&clk32k 1>;
 			};
 
 			watchdog: watchdog@ffffff80 {