Message ID | 20240822220100.3030184-2-kyle.swenson@est.tech (mailing list archive) |
---|---|
State | Accepted |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | net: pse-pd: tps23881: Reset GPIO support | expand |
On Thu, Aug 22, 2024 at 10:01:21PM +0000, Kyle Swenson wrote: > The TPS23881 has an active-low reset pin that can be connected to an > SoC. Document this with the device-tree binding. > > Signed-off-by: Kyle Swenson <kyle.swenson@est.tech> > Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
On Thu, 22 Aug 2024 22:01:21 +0000 Kyle Swenson <kyle.swenson@est.tech> wrote: > The TPS23881 has an active-low reset pin that can be connected to an > SoC. Document this with the device-tree binding. Reviewed-by: Kory Maincent <kory.maincent@bootlin.com> Thank you!
diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml index 6992d56832bf..d08abcb01211 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -21,10 +21,13 @@ properties: maxItems: 1 '#pse-cells': const: 1 + reset-gpios: + maxItems: 1 + channels: description: each set of 8 ports can be assigned to one physical channels or two for PoE4. This parameter describes the configuration of the ports conversion matrix that establishes relationship between the logical ports and the physical channels.