diff mbox series

[v3,2/2] remoteproc: imx_rproc: Add support for poweroff and reboot

Message ID 20240822-imx_rproc-v3-2-6d943723945d@nxp.com (mailing list archive)
State New
Headers show
Series remoteproc: imx_rproc: support non-blocking tx for i.MX7ULP | expand

Commit Message

Peng Fan (OSS) Aug. 22, 2024, 1:48 p.m. UTC
From: Peng Fan <peng.fan@nxp.com>

On some NXP platforms (e.g i.MX7ULP) the poweroff and reboot operations
are done via a separate remote core.

Typically Linux needs to send a message to the remote core and requests
for poweroff or reboot.

By default the communication between Linux core and the remote core is
is done via a blocking mailbox mechanism but Linux doesn't allow blocking
operations in the system off (reboot, power off) handlers.

So, we need to make sure the mailbox message send operations do not block
for this specific operations. Fortunately, Linux allows us to register
handlers that are called in preparation of the system off operations.

Thus, before carrying the power off or reboot preparations, just destroy
the existing mailboxes and create them as non-blocking.

Note that power off and restart are totally different operations and are
not complementary.

We introduce a new flag in the imx remoteproc per device data which tells
us when a device needs this special setup. For now, only imx7ulp needs it.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---
 drivers/remoteproc/imx_rproc.c | 42 ++++++++++++++++++++++++++++++++++++++++++
 drivers/remoteproc/imx_rproc.h |  4 ++++
 2 files changed, 46 insertions(+)

Comments

Daniel Baluta Aug. 23, 2024, 8:12 a.m. UTC | #1
On Thu, Aug 22, 2024 at 4:40 PM Peng Fan (OSS) <peng.fan@oss.nxp.com> wrote:
>
> From: Peng Fan <peng.fan@nxp.com>
>
> On some NXP platforms (e.g i.MX7ULP) the poweroff and reboot operations
> are done via a separate remote core.
>
> Typically Linux needs to send a message to the remote core and requests
> for poweroff or reboot.
>
> By default the communication between Linux core and the remote core is
> is done via a blocking mailbox mechanism but Linux doesn't allow blocking
> operations in the system off (reboot, power off) handlers.
>
> So, we need to make sure the mailbox message send operations do not block
> for this specific operations. Fortunately, Linux allows us to register
> handlers that are called in preparation of the system off operations.
>
> Thus, before carrying the power off or reboot preparations, just destroy
> the existing mailboxes and create them as non-blocking.
>
> Note that power off and restart are totally different operations and are
> not complementary.
>
> We introduce a new flag in the imx remoteproc per device data which tells
> us when a device needs this special setup. For now, only imx7ulp needs it.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>

Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
diff mbox series

Patch

diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
index 22677f581067..800015ff7ff9 100644
--- a/drivers/remoteproc/imx_rproc.c
+++ b/drivers/remoteproc/imx_rproc.c
@@ -18,6 +18,7 @@ 
 #include <linux/of_reserved_mem.h>
 #include <linux/platform_device.h>
 #include <linux/pm_domain.h>
+#include <linux/reboot.h>
 #include <linux/regmap.h>
 #include <linux/remoteproc.h>
 #include <linux/workqueue.h>
@@ -333,6 +334,7 @@  static const struct imx_rproc_dcfg imx_rproc_cfg_imx7ulp = {
 	.att		= imx_rproc_att_imx7ulp,
 	.att_size	= ARRAY_SIZE(imx_rproc_att_imx7ulp),
 	.method		= IMX_RPROC_NONE,
+	.flags		= IMX_RPROC_NEED_SYSTEM_OFF,
 };
 
 static const struct imx_rproc_dcfg imx_rproc_cfg_imx7d = {
@@ -1050,6 +1052,22 @@  static int imx_rproc_clk_enable(struct imx_rproc *priv)
 	return 0;
 }
 
+static int imx_rproc_sys_off_handler(struct sys_off_data *data)
+{
+	struct rproc *rproc = data->cb_data;
+	int ret;
+
+	imx_rproc_free_mbox(rproc);
+
+	ret = imx_rproc_xtr_mbox_init(rproc, false);
+	if (ret) {
+		dev_err(&rproc->dev, "Failed to request non-blocking mbox\n");
+		return NOTIFY_BAD;
+	}
+
+	return NOTIFY_DONE;
+}
+
 static int imx_rproc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -1104,6 +1122,30 @@  static int imx_rproc_probe(struct platform_device *pdev)
 	if (rproc->state != RPROC_DETACHED)
 		rproc->auto_boot = of_property_read_bool(np, "fsl,auto-boot");
 
+	if (dcfg->flags & IMX_RPROC_NEED_SYSTEM_OFF) {
+		/*
+		 * setup mailbox to non-blocking mode in
+		 * [SYS_OFF_MODE_POWER_OFF_PREPARE, SYS_OFF_MODE_RESTART_PREPARE]
+		 * phase before invoking [SYS_OFF_MODE_POWER_OFF, SYS_OFF_MODE_RESTART]
+		 * atomic chain, see kernel/reboot.c.
+		 */
+		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_POWER_OFF_PREPARE,
+						    SYS_OFF_PRIO_DEFAULT,
+						    imx_rproc_sys_off_handler, rproc);
+		if (ret) {
+			dev_err(dev, "register power off handler failure\n");
+			goto err_put_clk;
+		}
+
+		ret = devm_register_sys_off_handler(dev, SYS_OFF_MODE_RESTART_PREPARE,
+						    SYS_OFF_PRIO_DEFAULT,
+						    imx_rproc_sys_off_handler, rproc);
+		if (ret) {
+			dev_err(dev, "register restart handler failure\n");
+			goto err_put_clk;
+		}
+	}
+
 	ret = rproc_add(rproc);
 	if (ret) {
 		dev_err(dev, "rproc_add failed\n");
diff --git a/drivers/remoteproc/imx_rproc.h b/drivers/remoteproc/imx_rproc.h
index 79a1b8956d14..17a7d051c531 100644
--- a/drivers/remoteproc/imx_rproc.h
+++ b/drivers/remoteproc/imx_rproc.h
@@ -26,6 +26,9 @@  enum imx_rproc_method {
 	IMX_RPROC_SCU_API,
 };
 
+/* dcfg flags */
+#define IMX_RPROC_NEED_SYSTEM_OFF	BIT(0)
+
 struct imx_rproc_dcfg {
 	u32				src_reg;
 	u32				src_mask;
@@ -36,6 +39,7 @@  struct imx_rproc_dcfg {
 	const struct imx_rproc_att	*att;
 	size_t				att_size;
 	enum imx_rproc_method		method;
+	u32				flags;
 };
 
 #endif /* _IMX_RPROC_H */