diff mbox series

[V18,22/22] mmc: sdhci-pci-gli: enable UHS-II mode for GL9767

Message ID 20240802102229.10204-23-victorshihgli@gmail.com (mailing list archive)
State New
Headers show
Series Add support UHS-II for GL9755 and GL9767 | expand

Commit Message

Victor Shih Aug. 2, 2024, 10:22 a.m. UTC 
From: Victor Shih <victor.shih@genesyslogic.com.tw>

Changes are:
 * Enable the internal clock when do reset on UHS-II mode.
 * Increase timeout value before detecting UHS-II interface.
 * Add vendor settings for UHS-II mode.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---

Updates in V18:
 - Add new register settings for gl9767.
 - Add card_event in the sdhci_ops for gl9767.
 - Add sdhci_gl9767_set_card_detect_debounce_time()
   to configure the gl9767.
 - Adjust the sdhci_gl9767_reset() process for gl9767.

Updates in V17:
 - Use mmc_card_uhs2() to simplify the code in the sdhci_gl9767_reset().
 - Use mmc_card_uhs2() to simplify the code in the
   sdhci_gl9767_set_power().
 - Add sdhci_gli_overcurrent_event_enable() to sdhci_gl9767_set_power().

Updates in V15:
 - Add gl9767 to support uhs2 function.

---

 drivers/mmc/host/sdhci-pci-gli.c | 214 ++++++++++++++++++++++++++++++-
 1 file changed, 212 insertions(+), 2 deletions(-)

Comments

Adrian Hunter Aug. 23, 2024, 12:41 p.m. UTC | #1 
On 2/08/24 13:22, Victor Shih wrote:
> From: Victor Shih <victor.shih@genesyslogic.com.tw>
> 
> Changes are:
>  * Enable the internal clock when do reset on UHS-II mode.
>  * Increase timeout value before detecting UHS-II interface.
>  * Add vendor settings for UHS-II mode.
> 
> Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> ---
> 
> Updates in V18:
>  - Add new register settings for gl9767.
>  - Add card_event in the sdhci_ops for gl9767.
>  - Add sdhci_gl9767_set_card_detect_debounce_time()
>    to configure the gl9767.
>  - Adjust the sdhci_gl9767_reset() process for gl9767.
> 
> Updates in V17:
>  - Use mmc_card_uhs2() to simplify the code in the sdhci_gl9767_reset().
>  - Use mmc_card_uhs2() to simplify the code in the
>    sdhci_gl9767_set_power().
>  - Add sdhci_gli_overcurrent_event_enable() to sdhci_gl9767_set_power().
> 
> Updates in V15:
>  - Add gl9767 to support uhs2 function.
> 
> ---
> 
>  drivers/mmc/host/sdhci-pci-gli.c | 214 ++++++++++++++++++++++++++++++-
>  1 file changed, 212 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index a4164948de81..26f7cf4cb109 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -174,6 +174,15 @@
>  #define PCI_GLI_9755_MISC	    0x78
>  #define   PCI_GLI_9755_MISC_SSC_OFF    BIT(26)
>  
> +#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL				0x508
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK	  BIT(0)
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE			  GENMASK(21, 16)
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE	  0x05
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE	  0x3F
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE		  GENMASK(23, 22)
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS	  0x2
> +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS	  0x3
> +
>  #define SDHCI_GLI_9767_GM_BURST_SIZE			0x510
>  #define   SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET	  BIT(8)
>  
> @@ -210,6 +219,13 @@
>  #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
>  #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
>  
> +#define PCIE_GLI_9767_RESET_REG				0x8E4
> +#define   PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET	  BIT(0)
> +
> +#define PCIE_GLI_9767_UHS2_PHY_SET_REG1				0x90C
> +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR		  GENMASK(31, 29)
> +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE	  0x3
> +
>  #define PCIE_GLI_9767_SDHC_CAP			0x91C
>  #define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT	  BIT(5)
>  
> @@ -228,9 +244,15 @@
>  #define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE	  BIT(1)
>  
>  #define PCIE_GLI_9767_SD_DATA_MULTI_CTL				0x944
> +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2		  BIT(5)
> +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL	  BIT(8)
>  #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME	  GENMASK(23, 16)
>  #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE	  0x64
>  
> +#define PCIE_GLI_9767_UHS2_PHY_SET_REG2					0x948
> +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING		  GENMASK(22, 21)
> +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE		  0x0
> +
>  #define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2			0x950
>  #define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE	  BIT(0)
>  
> @@ -240,6 +262,28 @@
>  #define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2				0x958
>  #define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN	  BIT(0)
>  
> +#define PCIE_GLI_9767_UHS2_CTL1				0x95C
> +#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS		  BIT(5)
> +#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE	  0x1
> +#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL		  BIT(6)
> +#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE	  0x1
> +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN		  GENMASK(10, 7)
> +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE	  0x3
> +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV		  GENMASK(14, 11)
> +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE	  0xf
> +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS		  GENMASK(16, 15)
> +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE	  0x0
> +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV		  GENMASK(18, 17)
> +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE	  0x0
> +#define   PCIE_GLI_9767_UHS2_CTL1_PDRST			  BIT(25)
> +#define   PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE		  0x1
> +
> +#define PCIE_GLI_9767_UHS2_CTL2			0x964
> +#define   PCIE_GLI_9767_UHS2_CTL2_ZC		  GENMASK(3, 0)
> +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE	  0xb
> +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL	  BIT(6)
> +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE	  0x1
> +
>  #define GLI_MAX_TUNING_LOOP 40
>  
>  /* Genesys Logic chipset */
> @@ -1152,6 +1196,31 @@ static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
>  	gl9767_vhs_read(pdev);
>  }
>  
> +static void sdhci_gl9767_set_card_detect_debounce_time(struct sdhci_host *host)
> +{
> +	u32 value;
> +
> +	value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> +	value &= ~(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE |
> +		   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE);
> +	if (host->mmc->ops->get_cd(host->mmc))

This is OK from the ->card_event() path but not from others like:

sdhci_gl9767_reset() -> gli_set_9767() -> sdhci_gl9767_set_card_detect_debounce_time()
	o Reset can be called in atomic context (under spin lock), but
	host->mmc->ops->get_cd() can be reading a card detect GPIO which
	might sleep.

gli_probe_slot_gl9767() -> gli_set_9767() -> sdhci_gl9767_set_card_detect_debounce_time()
	o gli_probe_slot_gl9767() gets called before card detect GPIO
	is set up in sdhci-pci-core.c

However, presumably you are always using SDHCI_PRESENT_STATE register
for card detect (hence the debounce settings on the controller), so
it would be better to just read SDHCI_PRESENT_STATE here.

> +		value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
> +				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE) |
> +			 FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
> +				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS);
> +	else
> +		value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
> +				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE) |
> +			 FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
> +				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS);
> +	sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> +}
> +
> +static void sdhci_gl9767_card_event(struct sdhci_host *host)
> +{
> +	sdhci_gl9767_set_card_detect_debounce_time(host);
> +}
> +
>  static void gli_set_9767(struct sdhci_host *host)
>  {
>  	u32 value;
> @@ -1159,6 +1228,12 @@ static void gli_set_9767(struct sdhci_host *host)
>  	value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
>  	value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
>  	sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
> +
> +	value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> +	value &= ~SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK;
> +	sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> +
> +	sdhci_gl9767_set_card_detect_debounce_time(host);
>  }
>  
>  static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
> @@ -1197,8 +1272,54 @@ static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
>  
>  static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
>  {
> -	sdhci_reset(host, mask);
> -	gli_set_9767(host);
> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
> +	struct pci_dev *pdev = slot->chip->pdev;
> +	u32 value;
> +	u16 clk_ctrl;
> +	u16 ctrl2;
> +
> +	/* need internal clock */
> +	if (mask & SDHCI_RESET_ALL) {
> +		ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> +		clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> +
> +		if ((ctrl2 & SDHCI_CTRL_V4_MODE) && (ctrl2 & SDHCI_CTRL_UHS2_ENABLE)) {
> +			sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
> +		} else {
> +			sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
> +			sdhci_wait_clock_stable(host);
> +			sdhci_writew(host, SDHCI_CTRL_V4_MODE, SDHCI_HOST_CONTROL2);
> +		}

Same code is in sdhci_gl9755_reset(), so could factor it out into
a separate function.

> +
> +		gl9767_vhs_write(pdev);
> +
> +		pci_read_config_dword(pdev, PCIE_GLI_9767_RESET_REG, &value);
> +		value &= ~PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET;
> +		pci_write_config_dword(pdev, PCIE_GLI_9767_RESET_REG, value);
> +
> +		if (read_poll_timeout_atomic(pci_read_config_dword, value,
> +					     !(value & PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET),
> +					     1, 5, true, pdev, PCIE_GLI_9767_RESET_REG, &value)) {
> +			pr_warn("%s: %s: Reset SDHC AHB and TL-AMBA failure.\n",
> +				__func__, mmc_hostname(host->mmc));
> +			return;
> +		}
> +
> +		gl9767_vhs_read(pdev);
> +	}
> +
> +	if (mmc_card_uhs2(host->mmc)) {
> +		if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) {
> +			sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);

Don't you need to wait for that reset at some point?

> +			sdhci_gli_uhs2_reset_sd_tran(host);
> +		} else {
> +			sdhci_uhs2_reset(host, mask);
> +		}
> +		gli_set_9767(host);
> +	} else {
> +		sdhci_reset(host, mask);
> +		gli_set_9767(host);
> +	}

gli_set_9767() is always called, so could be moved here.

>  }
>  
>  static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> @@ -1288,6 +1409,86 @@ static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
>  	return 0;
>  }
>  
> +static void gl9767_vendor_init(struct sdhci_host *host)
> +{
> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
> +	struct pci_dev *pdev = slot->chip->pdev;
> +	u32 value;
> +
> +	gl9767_vhs_write(pdev);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, &value);
> +	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR,
> +			    PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, &value);
> +	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING,
> +			    PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, &value);
> +	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS,
> +			    PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL,
> +			    PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN,
> +			    PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV,
> +			    PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS,
> +			    PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_RECV,
> +			    PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_PDRST,
> +			    PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, value);
> +
> +	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value);
> +	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC,
> +			    PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE) |
> +		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC_CTL,
> +			    PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE);
> +	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value);
> +
> +	gl9767_vhs_read(pdev);
> +}
> +
> +static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode,	unsigned short vdd)
> +{
> +	struct sdhci_pci_slot *slot = sdhci_priv(host);
> +	struct pci_dev *pdev = slot->chip->pdev;
> +	u32 value;
> +
> +	if (mmc_card_uhs2(host->mmc)) {
> +		gl9767_vhs_write(pdev);
> +
> +		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> +		value |= PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
> +			 PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL;
> +		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> +
> +		gl9767_vhs_read(pdev);
> +
> +		sdhci_gli_overcurrent_event_enable(host, false);
> +		sdhci_uhs2_set_power(host, mode, vdd);
> +		sdhci_gli_overcurrent_event_enable(host, true);
> +	} else {
> +		gl9767_vhs_write(pdev);
> +
> +		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> +		value &= ~(PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
> +			   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL);
> +		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> +
> +		gl9767_vhs_read(pdev);
> +
> +		sdhci_gli_overcurrent_event_enable(host, false);
> +		sdhci_set_power(host, mode, vdd);
> +		sdhci_gli_overcurrent_event_enable(host, true);
> +	}
> +}
> +
>  static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
>  {
>  	struct sdhci_host *host = slot->host;
> @@ -1324,6 +1525,7 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
>  	host->mmc->caps2 |= MMC_CAP2_SD_EXP;
>  	host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
>  	sdhci_enable_v4_mode(host);
> +	gl9767_vendor_init(host);
>  
>  	return 0;
>  }
> @@ -1827,12 +2029,20 @@ static const struct sdhci_ops sdhci_gl9767_ops = {
>  	.reset			 = sdhci_gl9767_reset,
>  	.set_uhs_signaling	 = sdhci_set_uhs_signaling,
>  	.voltage_switch		 = sdhci_gl9767_voltage_switch,
> +	.dump_uhs2_regs		 = sdhci_uhs2_dump_regs,
> +	.set_timeout		 = sdhci_uhs2_set_timeout,
> +	.irq			 = sdhci_uhs2_irq,
> +	.set_power		 = sdhci_gl9767_set_power,
> +	.uhs2_pre_detect_init	 = sdhci_gli_pre_detect_init,
> +	.card_event		 = sdhci_gl9767_card_event,
>  };
>  
>  const struct sdhci_pci_fixes sdhci_gl9767 = {
>  	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
>  	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
>  	.probe_slot	= gli_probe_slot_gl9767,
> +	.add_host	= sdhci_pci_uhs2_add_host,
> +	.remove_host	= sdhci_pci_uhs2_remove_host,
>  	.ops		= &sdhci_gl9767_ops,
>  #ifdef CONFIG_PM_SLEEP
>  	.resume		= sdhci_pci_gli_resume,
Victor Shih Aug. 29, 2024, 9:22 a.m. UTC | #2 
On Fri, Aug 23, 2024 at 8:41 PM Adrian Hunter <adrian.hunter@intel.com> wrote:
>
> On 2/08/24 13:22, Victor Shih wrote:
> > From: Victor Shih <victor.shih@genesyslogic.com.tw>
> >
> > Changes are:
> >  * Enable the internal clock when do reset on UHS-II mode.
> >  * Increase timeout value before detecting UHS-II interface.
> >  * Add vendor settings for UHS-II mode.
> >
> > Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
> > Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
> > ---
> >
> > Updates in V18:
> >  - Add new register settings for gl9767.
> >  - Add card_event in the sdhci_ops for gl9767.
> >  - Add sdhci_gl9767_set_card_detect_debounce_time()
> >    to configure the gl9767.
> >  - Adjust the sdhci_gl9767_reset() process for gl9767.
> >
> > Updates in V17:
> >  - Use mmc_card_uhs2() to simplify the code in the sdhci_gl9767_reset().
> >  - Use mmc_card_uhs2() to simplify the code in the
> >    sdhci_gl9767_set_power().
> >  - Add sdhci_gli_overcurrent_event_enable() to sdhci_gl9767_set_power().
> >
> > Updates in V15:
> >  - Add gl9767 to support uhs2 function.
> >
> > ---
> >
> >  drivers/mmc/host/sdhci-pci-gli.c | 214 ++++++++++++++++++++++++++++++-
> >  1 file changed, 212 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> > index a4164948de81..26f7cf4cb109 100644
> > --- a/drivers/mmc/host/sdhci-pci-gli.c
> > +++ b/drivers/mmc/host/sdhci-pci-gli.c
> > @@ -174,6 +174,15 @@
> >  #define PCI_GLI_9755_MISC        0x78
> >  #define   PCI_GLI_9755_MISC_SSC_OFF    BIT(26)
> >
> > +#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL                         0x508
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK      BIT(0)
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE                        GENMASK(21, 16)
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE          0x05
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE         0x3F
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE                  GENMASK(23, 22)
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS      0x2
> > +#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS     0x3
> > +
> >  #define SDHCI_GLI_9767_GM_BURST_SIZE                 0x510
> >  #define   SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET          BIT(8)
> >
> > @@ -210,6 +219,13 @@
> >  #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF            BIT(21)
> >  #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN     BIT(30)
> >
> > +#define PCIE_GLI_9767_RESET_REG                              0x8E4
> > +#define   PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET     BIT(0)
> > +
> > +#define PCIE_GLI_9767_UHS2_PHY_SET_REG1                              0x90C
> > +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR                  GENMASK(31, 29)
> > +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE    0x3
> > +
> >  #define PCIE_GLI_9767_SDHC_CAP                       0x91C
> >  #define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT   BIT(5)
> >
> > @@ -228,9 +244,15 @@
> >  #define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE         BIT(1)
> >
> >  #define PCIE_GLI_9767_SD_DATA_MULTI_CTL                              0x944
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2                  BIT(5)
> > +#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL      BIT(8)
> >  #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME      GENMASK(23, 16)
> >  #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE        0x64
> >
> > +#define PCIE_GLI_9767_UHS2_PHY_SET_REG2                                      0x948
> > +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING              GENMASK(22, 21)
> > +#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE                0x0
> > +
> >  #define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2                     0x950
> >  #define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE       BIT(0)
> >
> > @@ -240,6 +262,28 @@
> >  #define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2                          0x958
> >  #define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN          BIT(0)
> >
> > +#define PCIE_GLI_9767_UHS2_CTL1                              0x95C
> > +#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS           BIT(5)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE     0x1
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL                 BIT(6)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE   0x1
> > +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN                  GENMASK(10, 7)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE    0x3
> > +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV                  GENMASK(14, 11)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE    0xf
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS            GENMASK(16, 15)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE      0x0
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV             GENMASK(18, 17)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE       0x0
> > +#define   PCIE_GLI_9767_UHS2_CTL1_PDRST                        BIT(25)
> > +#define   PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE                  0x1
> > +
> > +#define PCIE_GLI_9767_UHS2_CTL2                      0x964
> > +#define   PCIE_GLI_9767_UHS2_CTL2_ZC           GENMASK(3, 0)
> > +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE     0xb
> > +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL       BIT(6)
> > +#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE         0x1
> > +
> >  #define GLI_MAX_TUNING_LOOP 40
> >
> >  /* Genesys Logic chipset */
> > @@ -1152,6 +1196,31 @@ static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
> >       gl9767_vhs_read(pdev);
> >  }
> >
> > +static void sdhci_gl9767_set_card_detect_debounce_time(struct sdhci_host *host)
> > +{
> > +     u32 value;
> > +
> > +     value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> > +     value &= ~(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE |
> > +                SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE);
> > +     if (host->mmc->ops->get_cd(host->mmc))
>
> This is OK from the ->card_event() path but not from others like:
>
> sdhci_gl9767_reset() -> gli_set_9767() -> sdhci_gl9767_set_card_detect_debounce_time()
>         o Reset can be called in atomic context (under spin lock), but
>         host->mmc->ops->get_cd() can be reading a card detect GPIO which
>         might sleep.
>
> gli_probe_slot_gl9767() -> gli_set_9767() -> sdhci_gl9767_set_card_detect_debounce_time()
>         o gli_probe_slot_gl9767() gets called before card detect GPIO
>         is set up in sdhci-pci-core.c
>
> However, presumably you are always using SDHCI_PRESENT_STATE register
> for card detect (hence the debounce settings on the controller), so
> it would be better to just read SDHCI_PRESENT_STATE here.
>

Hi, Adrian

I will correct this issue in the next version.

Thanks, Victor Shih

> > +             value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
> > +                                 SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE) |
> > +                      FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
> > +                                 SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS);
> > +     else
> > +             value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
> > +                                 SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE) |
> > +                      FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
> > +                                 SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS);
> > +     sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> > +}
> > +
> > +static void sdhci_gl9767_card_event(struct sdhci_host *host)
> > +{
> > +     sdhci_gl9767_set_card_detect_debounce_time(host);
> > +}
> > +
> >  static void gli_set_9767(struct sdhci_host *host)
> >  {
> >       u32 value;
> > @@ -1159,6 +1228,12 @@ static void gli_set_9767(struct sdhci_host *host)
> >       value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
> >       value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
> >       sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
> > +
> > +     value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> > +     value &= ~SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK;
> > +     sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
> > +
> > +     sdhci_gl9767_set_card_detect_debounce_time(host);
> >  }
> >
> >  static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
> > @@ -1197,8 +1272,54 @@ static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
> >
> >  static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
> >  {
> > -     sdhci_reset(host, mask);
> > -     gli_set_9767(host);
> > +     struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +     struct pci_dev *pdev = slot->chip->pdev;
> > +     u32 value;
> > +     u16 clk_ctrl;
> > +     u16 ctrl2;
> > +
> > +     /* need internal clock */
> > +     if (mask & SDHCI_RESET_ALL) {
> > +             ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
> > +             clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
> > +
> > +             if ((ctrl2 & SDHCI_CTRL_V4_MODE) && (ctrl2 & SDHCI_CTRL_UHS2_ENABLE)) {
> > +                     sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
> > +             } else {
> > +                     sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
> > +                     sdhci_wait_clock_stable(host);
> > +                     sdhci_writew(host, SDHCI_CTRL_V4_MODE, SDHCI_HOST_CONTROL2);
> > +             }
>
> Same code is in sdhci_gl9755_reset(), so could factor it out into
> a separate function.
>

Hi, Adrian

I will correct this issue in the next version.

Thanks, Victor Shih

> > +
> > +             gl9767_vhs_write(pdev);
> > +
> > +             pci_read_config_dword(pdev, PCIE_GLI_9767_RESET_REG, &value);
> > +             value &= ~PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET;
> > +             pci_write_config_dword(pdev, PCIE_GLI_9767_RESET_REG, value);
> > +
> > +             if (read_poll_timeout_atomic(pci_read_config_dword, value,
> > +                                          !(value & PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET),
> > +                                          1, 5, true, pdev, PCIE_GLI_9767_RESET_REG, &value)) {
> > +                     pr_warn("%s: %s: Reset SDHC AHB and TL-AMBA failure.\n",
> > +                             __func__, mmc_hostname(host->mmc));
> > +                     return;
> > +             }
> > +
> > +             gl9767_vhs_read(pdev);
> > +     }
> > +
> > +     if (mmc_card_uhs2(host->mmc)) {
> > +             if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) {
> > +                     sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
>
> Don't you need to wait for that reset at some point?
>

Hi, Adrian

I will correct this issue in the next version.

Thanks, Victor Shih

> > +                     sdhci_gli_uhs2_reset_sd_tran(host);
> > +             } else {
> > +                     sdhci_uhs2_reset(host, mask);
> > +             }
> > +             gli_set_9767(host);
> > +     } else {
> > +             sdhci_reset(host, mask);
> > +             gli_set_9767(host);
> > +     }
>
> gli_set_9767() is always called, so could be moved here.
>

Hi, Adrian

I will correct this issue in the next version.

Thanks, Victor Shih

> >  }
> >
> >  static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> > @@ -1288,6 +1409,86 @@ static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
> >       return 0;
> >  }
> >
> > +static void gl9767_vendor_init(struct sdhci_host *host)
> > +{
> > +     struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +     struct pci_dev *pdev = slot->chip->pdev;
> > +     u32 value;
> > +
> > +     gl9767_vhs_write(pdev);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, &value);
> > +     value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR,
> > +                         PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, &value);
> > +     value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING,
> > +                         PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, &value);
> > +     value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS,
> > +                         PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL,
> > +                         PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN,
> > +                         PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV,
> > +                         PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS,
> > +                         PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_RECV,
> > +                         PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_PDRST,
> > +                         PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, value);
> > +
> > +     pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value);
> > +     value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC,
> > +                         PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE) |
> > +              FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC_CTL,
> > +                         PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE);
> > +     pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value);
> > +
> > +     gl9767_vhs_read(pdev);
> > +}
> > +
> > +static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode,      unsigned short vdd)
> > +{
> > +     struct sdhci_pci_slot *slot = sdhci_priv(host);
> > +     struct pci_dev *pdev = slot->chip->pdev;
> > +     u32 value;
> > +
> > +     if (mmc_card_uhs2(host->mmc)) {
> > +             gl9767_vhs_write(pdev);
> > +
> > +             pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> > +             value |= PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
> > +                      PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL;
> > +             pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> > +
> > +             gl9767_vhs_read(pdev);
> > +
> > +             sdhci_gli_overcurrent_event_enable(host, false);
> > +             sdhci_uhs2_set_power(host, mode, vdd);
> > +             sdhci_gli_overcurrent_event_enable(host, true);
> > +     } else {
> > +             gl9767_vhs_write(pdev);
> > +
> > +             pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
> > +             value &= ~(PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
> > +                        PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL);
> > +             pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
> > +
> > +             gl9767_vhs_read(pdev);
> > +
> > +             sdhci_gli_overcurrent_event_enable(host, false);
> > +             sdhci_set_power(host, mode, vdd);
> > +             sdhci_gli_overcurrent_event_enable(host, true);
> > +     }
> > +}
> > +
> >  static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
> >  {
> >       struct sdhci_host *host = slot->host;
> > @@ -1324,6 +1525,7 @@ static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
> >       host->mmc->caps2 |= MMC_CAP2_SD_EXP;
> >       host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
> >       sdhci_enable_v4_mode(host);
> > +     gl9767_vendor_init(host);
> >
> >       return 0;
> >  }
> > @@ -1827,12 +2029,20 @@ static const struct sdhci_ops sdhci_gl9767_ops = {
> >       .reset                   = sdhci_gl9767_reset,
> >       .set_uhs_signaling       = sdhci_set_uhs_signaling,
> >       .voltage_switch          = sdhci_gl9767_voltage_switch,
> > +     .dump_uhs2_regs          = sdhci_uhs2_dump_regs,
> > +     .set_timeout             = sdhci_uhs2_set_timeout,
> > +     .irq                     = sdhci_uhs2_irq,
> > +     .set_power               = sdhci_gl9767_set_power,
> > +     .uhs2_pre_detect_init    = sdhci_gli_pre_detect_init,
> > +     .card_event              = sdhci_gl9767_card_event,
> >  };
> >
> >  const struct sdhci_pci_fixes sdhci_gl9767 = {
> >       .quirks         = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
> >       .quirks2        = SDHCI_QUIRK2_BROKEN_DDR50,
> >       .probe_slot     = gli_probe_slot_gl9767,
> > +     .add_host       = sdhci_pci_uhs2_add_host,
> > +     .remove_host    = sdhci_pci_uhs2_remove_host,
> >       .ops            = &sdhci_gl9767_ops,
> >  #ifdef CONFIG_PM_SLEEP
> >       .resume         = sdhci_pci_gli_resume,
>
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
index a4164948de81..26f7cf4cb109 100644
--- a/drivers/mmc/host/sdhci-pci-gli.c
+++ b/drivers/mmc/host/sdhci-pci-gli.c
@@ -174,6 +174,15 @@ 
 #define PCI_GLI_9755_MISC	    0x78
 #define   PCI_GLI_9755_MISC_SSC_OFF    BIT(26)
 
+#define SDHCI_GLI_9767_SD_HOST_OPERATION_CTL				0x508
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK	  BIT(0)
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE			  GENMASK(21, 16)
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE	  0x05
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE	  0x3F
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE		  GENMASK(23, 22)
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS	  0x2
+#define   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS	  0x3
+
 #define SDHCI_GLI_9767_GM_BURST_SIZE			0x510
 #define   SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET	  BIT(8)
 
@@ -210,6 +219,13 @@ 
 #define   PCIE_GLI_9767_SCR_CORE_PWR_D3_OFF		  BIT(21)
 #define   PCIE_GLI_9767_SCR_CFG_RST_DATA_LINK_DOWN	  BIT(30)
 
+#define PCIE_GLI_9767_RESET_REG				0x8E4
+#define   PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET	  BIT(0)
+
+#define PCIE_GLI_9767_UHS2_PHY_SET_REG1				0x90C
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR		  GENMASK(31, 29)
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE	  0x3
+
 #define PCIE_GLI_9767_SDHC_CAP			0x91C
 #define   PCIE_GLI_9767_SDHC_CAP_SDEI_RESULT	  BIT(5)
 
@@ -228,9 +244,15 @@ 
 #define   PCIE_GLI_9767_SD_EXPRESS_CTL_SD_EXPRESS_MODE	  BIT(1)
 
 #define PCIE_GLI_9767_SD_DATA_MULTI_CTL				0x944
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2		  BIT(5)
+#define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL	  BIT(8)
 #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME	  GENMASK(23, 16)
 #define   PCIE_GLI_9767_SD_DATA_MULTI_CTL_DISCONNECT_TIME_VALUE	  0x64
 
+#define PCIE_GLI_9767_UHS2_PHY_SET_REG2					0x948
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING		  GENMASK(22, 21)
+#define   PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE		  0x0
+
 #define PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2			0x950
 #define   PCIE_GLI_9767_NORMAL_ERR_INT_STATUS_REG2_SDEI_COMPLETE	  BIT(0)
 
@@ -240,6 +262,28 @@ 
 #define PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2				0x958
 #define   PCIE_GLI_9767_NORMAL_ERR_INT_SIGNAL_EN_REG2_SDEI_COMPLETE_SIGNAL_EN	  BIT(0)
 
+#define PCIE_GLI_9767_UHS2_CTL1				0x95C
+#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS		  BIT(5)
+#define   PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE	  0x1
+#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL		  BIT(6)
+#define   PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE	  0x1
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN		  GENMASK(10, 7)
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE	  0x3
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV		  GENMASK(14, 11)
+#define   PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE	  0xf
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS		  GENMASK(16, 15)
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE	  0x0
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV		  GENMASK(18, 17)
+#define   PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE	  0x0
+#define   PCIE_GLI_9767_UHS2_CTL1_PDRST			  BIT(25)
+#define   PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE		  0x1
+
+#define PCIE_GLI_9767_UHS2_CTL2			0x964
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC		  GENMASK(3, 0)
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE	  0xb
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL	  BIT(6)
+#define   PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE	  0x1
+
 #define GLI_MAX_TUNING_LOOP 40
 
 /* Genesys Logic chipset */
@@ -1152,6 +1196,31 @@  static void sdhci_gl9767_set_clock(struct sdhci_host *host, unsigned int clock)
 	gl9767_vhs_read(pdev);
 }
 
+static void sdhci_gl9767_set_card_detect_debounce_time(struct sdhci_host *host)
+{
+	u32 value;
+
+	value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
+	value &= ~(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE |
+		   SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE);
+	if (host->mmc->ops->get_cd(host->mmc))
+		value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
+				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_IN_VALUE) |
+			 FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
+				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_1MS);
+	else
+		value |= FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE,
+				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_PLUG_OUT_VALUE) |
+			 FIELD_PREP(SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE,
+				    SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_DEBOUNCE_SCALE_10MS);
+	sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
+}
+
+static void sdhci_gl9767_card_event(struct sdhci_host *host)
+{
+	sdhci_gl9767_set_card_detect_debounce_time(host);
+}
+
 static void gli_set_9767(struct sdhci_host *host)
 {
 	u32 value;
@@ -1159,6 +1228,12 @@  static void gli_set_9767(struct sdhci_host *host)
 	value = sdhci_readl(host, SDHCI_GLI_9767_GM_BURST_SIZE);
 	value &= ~SDHCI_GLI_9767_GM_BURST_SIZE_AXI_ALWAYS_SET;
 	sdhci_writel(host, value, SDHCI_GLI_9767_GM_BURST_SIZE);
+
+	value = sdhci_readl(host, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
+	value &= ~SDHCI_GLI_9767_SD_HOST_OPERATION_CTL_CMD_CONFLICT_CHECK;
+	sdhci_writel(host, value, SDHCI_GLI_9767_SD_HOST_OPERATION_CTL);
+
+	sdhci_gl9767_set_card_detect_debounce_time(host);
 }
 
 static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
@@ -1197,8 +1272,54 @@  static void gl9767_hw_setting(struct sdhci_pci_slot *slot)
 
 static void sdhci_gl9767_reset(struct sdhci_host *host, u8 mask)
 {
-	sdhci_reset(host, mask);
-	gli_set_9767(host);
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+	u16 clk_ctrl;
+	u16 ctrl2;
+
+	/* need internal clock */
+	if (mask & SDHCI_RESET_ALL) {
+		ctrl2 = sdhci_readw(host, SDHCI_HOST_CONTROL2);
+		clk_ctrl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
+
+		if ((ctrl2 & SDHCI_CTRL_V4_MODE) && (ctrl2 & SDHCI_CTRL_UHS2_ENABLE)) {
+			sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
+		} else {
+			sdhci_writew(host, SDHCI_CLOCK_INT_EN, SDHCI_CLOCK_CONTROL);
+			sdhci_wait_clock_stable(host);
+			sdhci_writew(host, SDHCI_CTRL_V4_MODE, SDHCI_HOST_CONTROL2);
+		}
+
+		gl9767_vhs_write(pdev);
+
+		pci_read_config_dword(pdev, PCIE_GLI_9767_RESET_REG, &value);
+		value &= ~PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET;
+		pci_write_config_dword(pdev, PCIE_GLI_9767_RESET_REG, value);
+
+		if (read_poll_timeout_atomic(pci_read_config_dword, value,
+					     !(value & PCIE_GLI_9767_RESET_REG_SD_HOST_SW_RESET),
+					     1, 5, true, pdev, PCIE_GLI_9767_RESET_REG, &value)) {
+			pr_warn("%s: %s: Reset SDHC AHB and TL-AMBA failure.\n",
+				__func__, mmc_hostname(host->mmc));
+			return;
+		}
+
+		gl9767_vhs_read(pdev);
+	}
+
+	if (mmc_card_uhs2(host->mmc)) {
+		if (mask & (SDHCI_RESET_CMD | SDHCI_RESET_DATA)) {
+			sdhci_writeb(host, mask, SDHCI_SOFTWARE_RESET);
+			sdhci_gli_uhs2_reset_sd_tran(host);
+		} else {
+			sdhci_uhs2_reset(host, mask);
+		}
+		gli_set_9767(host);
+	} else {
+		sdhci_reset(host, mask);
+		gli_set_9767(host);
+	}
 }
 
 static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
@@ -1288,6 +1409,86 @@  static int gl9767_init_sd_express(struct mmc_host *mmc, struct mmc_ios *ios)
 	return 0;
 }
 
+static void gl9767_vendor_init(struct sdhci_host *host)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	gl9767_vhs_write(pdev);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR,
+			    PCIE_GLI_9767_UHS2_PHY_SET_REG1_SERDES_INTR_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG1, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING,
+			    PCIE_GLI_9767_UHS2_PHY_SET_REG2_SSC_PPM_SETTING_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_PHY_SET_REG2, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS,
+			    PCIE_GLI_9767_UHS2_CTL1_TRANS_PASS_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL,
+			    PCIE_GLI_9767_UHS2_CTL1_DECODING_CTL_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN,
+			    PCIE_GLI_9767_UHS2_CTL1_SERDES_TRAN_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV,
+			    PCIE_GLI_9767_UHS2_CTL1_SERDES_RECV_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS,
+			    PCIE_GLI_9767_UHS2_CTL1_DIR_TRANS_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_DIR_RECV,
+			    PCIE_GLI_9767_UHS2_CTL1_DIR_RECV_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL1_PDRST,
+			    PCIE_GLI_9767_UHS2_CTL1_PDRST_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL1, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, &value);
+	value |= FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC,
+			    PCIE_GLI_9767_UHS2_CTL2_ZC_VALUE) |
+		 FIELD_PREP(PCIE_GLI_9767_UHS2_CTL2_ZC_CTL,
+			    PCIE_GLI_9767_UHS2_CTL2_ZC_CTL_VALUE);
+	pci_write_config_dword(pdev, PCIE_GLI_9767_UHS2_CTL2, value);
+
+	gl9767_vhs_read(pdev);
+}
+
+static void sdhci_gl9767_set_power(struct sdhci_host *host, unsigned char mode,	unsigned short vdd)
+{
+	struct sdhci_pci_slot *slot = sdhci_priv(host);
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	if (mmc_card_uhs2(host->mmc)) {
+		gl9767_vhs_write(pdev);
+
+		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+		value |= PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
+			 PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL;
+		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+		gl9767_vhs_read(pdev);
+
+		sdhci_gli_overcurrent_event_enable(host, false);
+		sdhci_uhs2_set_power(host, mode, vdd);
+		sdhci_gli_overcurrent_event_enable(host, true);
+	} else {
+		gl9767_vhs_write(pdev);
+
+		pci_read_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, &value);
+		value &= ~(PCIE_GLI_9767_SD_DATA_MULTI_CTL_SELECT_UHS2 |
+			   PCIE_GLI_9767_SD_DATA_MULTI_CTL_UHS2_SWITCH_CTL);
+		pci_write_config_dword(pdev, PCIE_GLI_9767_SD_DATA_MULTI_CTL, value);
+
+		gl9767_vhs_read(pdev);
+
+		sdhci_gli_overcurrent_event_enable(host, false);
+		sdhci_set_power(host, mode, vdd);
+		sdhci_gli_overcurrent_event_enable(host, true);
+	}
+}
+
 static int gli_probe_slot_gl9750(struct sdhci_pci_slot *slot)
 {
 	struct sdhci_host *host = slot->host;
@@ -1324,6 +1525,7 @@  static int gli_probe_slot_gl9767(struct sdhci_pci_slot *slot)
 	host->mmc->caps2 |= MMC_CAP2_SD_EXP;
 	host->mmc_host_ops.init_sd_express = gl9767_init_sd_express;
 	sdhci_enable_v4_mode(host);
+	gl9767_vendor_init(host);
 
 	return 0;
 }
@@ -1827,12 +2029,20 @@  static const struct sdhci_ops sdhci_gl9767_ops = {
 	.reset			 = sdhci_gl9767_reset,
 	.set_uhs_signaling	 = sdhci_set_uhs_signaling,
 	.voltage_switch		 = sdhci_gl9767_voltage_switch,
+	.dump_uhs2_regs		 = sdhci_uhs2_dump_regs,
+	.set_timeout		 = sdhci_uhs2_set_timeout,
+	.irq			 = sdhci_uhs2_irq,
+	.set_power		 = sdhci_gl9767_set_power,
+	.uhs2_pre_detect_init	 = sdhci_gli_pre_detect_init,
+	.card_event		 = sdhci_gl9767_card_event,
 };
 
 const struct sdhci_pci_fixes sdhci_gl9767 = {
 	.quirks		= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
 	.quirks2	= SDHCI_QUIRK2_BROKEN_DDR50,
 	.probe_slot	= gli_probe_slot_gl9767,
+	.add_host	= sdhci_pci_uhs2_add_host,
+	.remove_host	= sdhci_pci_uhs2_remove_host,
 	.ops		= &sdhci_gl9767_ops,
 #ifdef CONFIG_PM_SLEEP
 	.resume		= sdhci_pci_gli_resume,