| Message ID | 20240826044530.726458-4-bigfoot@classfun.cn (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add support for LCKFB Taishan Pi RK3566 | expand |
On Mon, Aug 26, 2024 at 12:44:13PM +0800, Junhao Xie wrote: > Add dts for LCKFB Taishan Pi. > > Working IO: > * UART > * RGB LED > * AP6212 WiFi > * AP6212 Bluetooth > * SD Card > * eMMC > * HDMI > * Mali GPU > * USB Type-C > * USB Type-A > > Signed-off-by: Junhao Xie <bigfoot@classfun.cn> > --- > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3566-lckfb-tspi.dts | 743 ++++++++++++++++++ > 2 files changed, 744 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts ... > + dc_12v: dc-12v { Use some reasonable prefix or suffix (regulator) for all regulator nodes. Or even: use name for all fixed regulators which matches current format recommendation: 'regulator-[0-9]v[0-9]' https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46 > + compatible = "regulator-fixed"; > + regulator-name = "dc_12v"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <12000000>; > + regulator-max-microvolt = <12000000>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_sys: vcc5v0-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc_12v>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_host"; > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + enable-active-high; > + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; > + vin-supply = <&vcc5v0_sys>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + }; > + > + vccio_flash: vccio-flash { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_flash"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; > + > + vccio_wl: vccio-wl { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_wl"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_3v3>; > + }; > +}; > + > +&combphy1 { > + status = "okay"; > +}; > + > +&combphy2 { > + status = "okay"; > +}; > + > +&cpu0 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu1 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu2 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&cpu3 { > + cpu-supply = <&vdd_cpu>; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi { > + avdd-0v9-supply = <&vdda0v9_image>; > + avdd-1v8-supply = <&vcca1v8_image>; > + status = "okay"; > +}; > + > +&hdmi_in { > + hdmi_in_vp0: endpoint { > + remote-endpoint = <&vp0_out_hdmi>; > + }; > +}; > + > +&hdmi_out { > + hdmi_out_con: endpoint { > + remote-endpoint = <&hdmi_con_in>; > + }; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + status = "okay"; > + > + vdd_cpu: regulator@1c { > + compatible = "tcs,tcs4525"; > + reg = <0x1c>; > + fcs,suspend-voltage-selector = <1>; > + regulator-name = "vdd_cpu"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1150000>; > + regulator-ramp-delay = <2300>; > + vin-supply = <&vcc5v0_sys>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + rk809: pmic@20 { > + compatible = "rockchip,rk809"; > + reg = <0x20>; > + > + interrupt-parent = <&gpio0>; > + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; > + > + #clock-cells = <1>; > + clock-output-names = "rk808-clkout1", "rk808-clkout2"; > + clock-names = "mclk"; > + clocks = <&cru I2S1_MCLKOUT_TX>; > + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; > + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; > + > + #sound-dai-cells = <0>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc3v3_sys>; > + vcc2-supply = <&vcc3v3_sys>; > + vcc3-supply = <&vcc3v3_sys>; > + vcc4-supply = <&vcc3v3_sys>; > + vcc5-supply = <&vcc3v3_sys>; > + vcc6-supply = <&vcc3v3_sys>; > + vcc7-supply = <&vcc3v3_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc3v3_sys>; > + > + regulators { > + vdd_logic: DCDC_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_logic"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_gpu: DCDC_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_gpu"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-initial-mode = <0x2>; > + regulator-name = "vcc_ddr"; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vdd_npu: DCDC_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <500000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-initial-mode = <0x2>; > + regulator-name = "vdd_npu"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_image: LDO_REG1 { > + regulator-boot-on; > + regulator-always-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda0v9_image"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda_0v9: LDO_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda_0v9"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdda0v9_pmu: LDO_REG3 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-name = "vdda0v9_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <900000>; > + }; > + }; > + > + vccio_acodec: LDO_REG4 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_acodec"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vccio_sd: LDO_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vccio_sd"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_pmu: LDO_REG6 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-name = "vcc3v3_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3300000>; > + }; > + }; > + > + vcca_1v8: LDO_REG7 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca_1v8"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca1v8_pmu: LDO_REG8 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_pmu"; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcca1v8_image: LDO_REG9 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcca1v8_image"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG5 { > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-name = "vcc_1v8"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v3: SWITCH_REG1 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc_3v3"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc3v3_sd: SWITCH_REG2 { > + regulator-always-on; > + regulator-boot-on; > + regulator-name = "vcc3v3_sd"; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + }; > + > + codec { > + rockchip,mic-in-differential; > + }; > + }; > +}; > + > +&i2c1 { > + status = "okay"; > + /* Touch Screen */ > +}; > + > +&i2c4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2c4m0_xfer>; > + status = "okay"; > + /* Camera */ > +}; > + > +&i2s0_8ch { > + status = "okay"; > + /* HDMI */ > +}; > + > +&i2s1_8ch { > + pinctrl-names = "default"; > + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; > + rockchip,trcm-sync-tx-only; > + status = "okay"; > + /* PMIC */ > +}; > + > +&i2s2_2ch { > + rockchip,trcm-sync-tx-only; > + status = "okay"; > + /* AP6212 Bluetooth */ > +}; > + > +&pinctrl { > + bt { > + bt_enable_h: bt-enable-h { > + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + bt_host_wake_l: bt-host-wake-l { > + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; > + }; > + > + bt_wake_l: bt-wake-l { > + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + sdio-pwrseq { > + wifi_enable_h: wifi-enable-h { > + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + > + wifi_host_wake_h: wifi-host-wake-l { > + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > + > + hp-detect { > + hp_det: hp-det { > + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + }; > + > + pmic { > + pmic_int: pmic_int { > + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > + }; > + > + soc_slppin_gpio: soc_slppin_gpio { > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; > + }; > + > + soc_slppin_slp: soc_slppin_slp { > + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; > + }; > + > + soc_slppin_rst: soc_slppin_rst { > + rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; > + }; > + }; > + > + usb2 { > + vcc5v0_host_en: vcc5v0-host-en { > + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&pmu_io_domains { > + pmuio1-supply = <&vcc3v3_pmu>; > + pmuio2-supply = <&vcc3v3_pmu>; > + vccio1-supply = <&vccio_acodec>; > + vccio2-supply = <&vccio_flash>; > + vccio3-supply = <&vccio_sd>; > + vccio4-supply = <&vccio_wl>; > + vccio5-supply = <&vcc_3v3>; > + vccio6-supply = <&vcc_1v8>; > + vccio7-supply = <&vcc_3v3>; > + status = "okay"; > +}; > + > +&pmugrf { > + reboot-mode { > + compatible = "syscon-reboot-mode"; > + offset = <0x200>; > + mode-normal = <BOOT_NORMAL>; > + mode-loader = <BOOT_BL_DOWNLOAD>; > + mode-recovery = <BOOT_RECOVERY>; > + mode-bootloader = <BOOT_FASTBOOT>; > + }; > +}; > + > +&saradc { > + vref-supply = <&vcca_1v8>; > + status = "okay"; > + /* Channel 0: Recovery Button */ > + /* Channel 1: Hardware ID */ > +}; > + > +&sdhci { > + bus-width = <8>; > + max-frequency = <200000000>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; > + status = "okay"; Keep status the last. Best regards, Krzysztof
Hi Junhao, > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts > ... > + aliases { > + mmc0 = &sdmmc0; > + mmc1 = &sdhci; > + mmc2 = &sdmmc1; > + wifi = &brcmf; > + bluetooth = &bluetooth; > + }; WiFi and Bluetooth do not need aliases. > ... > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_host"; > + regulator-boot-on; > + regulator-always-on; This regulator does not need always-on and boot-on. > ... > + vccio_flash: vccio-flash { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_flash"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + vin-supply = <&vcc_1v8>; > + }; Generally speaking, vccio_flash is not a DCDC regulator, it is directly connected to vcc_1v8. Maybe you need to confirm the schematics. > + > + vccio_wl: vccio-wl { > + compatible = "regulator-fixed"; > + regulator-name = "vccio_wl"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc_3v3>; > + }; Same as above, usually like this: VCC_1V8 or VCCA1V8_PMU - 0R - VCCIO_WL `sd-uhs-sdr104` requires 1.8v io voltage, you need to confirm the schematics. > ... > +&pinctrl { > ... > pmic { > + pmic { > + pmic_int: pmic_int { Only the pmic_int is needed. Also `pmic_int: pmic-int {` > ... > +&sdhci { > + bus-width = <8>; > + max-frequency = <200000000>; > + non-removable; > + pinctrl-names = "default"; > + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; > + status = "okay"; > + vmmc-supply = <&vccio_flash>; > + vqmmc-supply = <&vccio_flash>; > +}; The vmmc requires 3.3V supply (on rk356x). > ... > +&sdmmc1 { > ... > + sd-uhs-sdr104; > + vmmc-supply = <&vccio_wl>; > + vqmmc-supply = <&vccio_wl>; Same as above. > ... +&uart1 { > ... + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vccio_wl>; Here corresponds to sdmmc1. Thanks, Chukun
On 2024/8/26 14:06, Krzysztof Kozlowski wrote: > On Mon, Aug 26, 2024 at 12:44:13PM +0800, Junhao Xie wrote: >> Add dts for LCKFB Taishan Pi. >> [...] > >> + dc_12v: dc-12v { > > Use some reasonable prefix or suffix (regulator) for all regulator > nodes. Or even: use name for all fixed regulators which matches current > format recommendation: 'regulator-[0-9]v[0-9]' > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46 > Thanks, I will rename it to dc-12v-regulator [...] >> + >> +&sdhci { >> + bus-width = <8>; >> + max-frequency = <200000000>; >> + non-removable; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; >> + status = "okay"; > > Keep status the last. > > Best regards, > Krzysztof > > Thanks for your review, I will fix all problems and post patch v2!
On 2024/8/26 15:01, Chukun Pan wrote: > Hi Junhao, > >> --- /dev/null >> +++ b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts >> ... >> + aliases { >> + mmc0 = &sdmmc0; >> + mmc1 = &sdhci; >> + mmc2 = &sdmmc1; >> + wifi = &brcmf; >> + bluetooth = &bluetooth; >> + }; > > WiFi and Bluetooth do not need aliases. > >> ... >> + vcc5v0_host: vcc5v0-host-regulator { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_host"; >> + regulator-boot-on; >> + regulator-always-on; > > This regulator does not need always-on and boot-on. > I will remove them. > >> ... >> + vccio_flash: vccio-flash { >> + compatible = "regulator-fixed"; >> + regulator-name = "vccio_flash"; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + vin-supply = <&vcc_1v8>; >> + }; > > Generally speaking, vccio_flash is not a DCDC regulator, > it is directly connected to vcc_1v8. Maybe you need to > confirm the schematics. > Yes, vccio_flash and vccio_wl are not DCDC regulator, they are connected to vcc_1v8 and vcc_3v3 through voltage selection resistors. > >> + >> + vccio_wl: vccio-wl { >> + compatible = "regulator-fixed"; >> + regulator-name = "vccio_wl"; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + vin-supply = <&vcc_3v3>; >> + }; > > Same as above, usually like this: > VCC_1V8 or VCCA1V8_PMU - 0R - VCCIO_WL > `sd-uhs-sdr104` requires 1.8v io voltage, > you need to confirm the schematics. > It is actually connected to vcc_1v8, I will fix it. > >> ... >> +&pinctrl { >> ... >> pmic { >> + pmic { >> + pmic_int: pmic_int { > > Only the pmic_int is needed. > Also `pmic_int: pmic-int {` > >> ... >> +&sdhci { >> + bus-width = <8>; >> + max-frequency = <200000000>; >> + non-removable; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; >> + status = "okay"; >> + vmmc-supply = <&vccio_flash>; >> + vqmmc-supply = <&vccio_flash>; >> +}; > > The vmmc requires 3.3V supply (on rk356x). > Yes, the vmmc of eMMC is actually connected to vcc_3v3, I will fix it. > >> ... >> +&sdmmc1 { >> ... >> + sd-uhs-sdr104; >> + vmmc-supply = <&vccio_wl>; >> + vqmmc-supply = <&vccio_wl>; > > Same as above. > >> ... > +&uart1 { >> ... > + vbat-supply = <&vcc3v3_sys>; > + vddio-supply = <&vccio_wl>; > > Here corresponds to sdmmc1. > > Thanks, > Chukun > Thanks for your review, I will fix all problems and post patch v2!
On 26/08/2024 09:46, Junhao Xie wrote: > On 2024/8/26 14:06, Krzysztof Kozlowski wrote: >> On Mon, Aug 26, 2024 at 12:44:13PM +0800, Junhao Xie wrote: >>> Add dts for LCKFB Taishan Pi. >>> > > [...] > >> >>> + dc_12v: dc-12v { >> >> Use some reasonable prefix or suffix (regulator) for all regulator >> nodes. Or even: use name for all fixed regulators which matches current >> format recommendation: 'regulator-[0-9]v[0-9]' >> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46 >> > > Thanks, I will rename it to dc-12v-regulator Well, this makes ordering tricky and is not the proposed policy, but sure... I gave you reference hoping you will read it. Best regards, Krzysztof
On 2024/8/26 16:08, Krzysztof Kozlowski wrote: > On 26/08/2024 09:46, Junhao Xie wrote: >> On 2024/8/26 14:06, Krzysztof Kozlowski wrote: >>> On Mon, Aug 26, 2024 at 12:44:13PM +0800, Junhao Xie wrote: >>>> Add dts for LCKFB Taishan Pi. >>>> >> >> [...] >> >>> >>>> + dc_12v: dc-12v { >>> >>> Use some reasonable prefix or suffix (regulator) for all regulator >>> nodes. Or even: use name for all fixed regulators which matches current >>> format recommendation: 'regulator-[0-9]v[0-9]' >>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46 >>> >> >> Thanks, I will rename it to dc-12v-regulator > > Well, this makes ordering tricky and is not the proposed policy, but > sure... I gave you reference hoping you will read it. > > Best regards, > Krzysztof > > Oh, sorry, it should be renamed to 'regulator-12v0-dcin', as this name complies more with the policy. Thank you for the reminder!
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index fda1b980eb4b..921bc3014b84 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -102,6 +102,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-blade.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-cm4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-soquartz-model-a.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-box-demo.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lckfb-tspi.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-lubancat-1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts new file mode 100644 index 000000000000..8dd7d40cc51e --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts @@ -0,0 +1,743 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include <dt-bindings/soc/rockchip,vop2.h> +#include <dt-bindings/soc/rockchip,boot-mode.h> +#include "rk3566.dtsi" + +/ { + model = "LCKFB Taishan Pi RK3566"; + compatible = "lckfb,tspi-rk3566", "rockchip,rk3566"; + + aliases { + mmc0 = &sdmmc0; + mmc1 = &sdhci; + mmc2 = &sdmmc1; + wifi = &brcmf; + bluetooth = &bluetooth; + }; + + chosen: chosen { + stdout-path = "serial2:1500000n8"; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + ramoops: ramoops@110000 { + compatible = "ramoops"; + reg = <0 0x110000 0 0xf0000>; + record-size = <0x20000>; + console-size = <0x80000>; + ftrace-size = <0x00000>; + pmsg-size = <0x50000>; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,name = "Analog RK809"; + simple-audio-card,mclk-fs = <256>; + + simple-audio-card,cpu { + sound-dai = <&i2s1_8ch>; + }; + + simple-audio-card,codec { + sound-dai = <&rk809>; + }; + }; + + hdmi_con: hdmi-con { + compatible = "hdmi-connector"; + type = "d"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + adc_keys: adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 0>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "recovery"; + linux,code = <KEY_RESTART>; + press-threshold-microvolt = <108>; + }; + }; + + leds: leds { + compatible = "gpio-leds"; + rgb_led_r: rgb-led-r { + label = "status-red"; + gpios = <&gpio1 RK_PB2 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_RED>; + }; + rgb_led_g: rgb-led-g { + label = "status-green"; + gpios = <&gpio1 RK_PB1 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_GREEN>; + }; + rgb_led_b: rgb-led-b { + label = "status-blue"; + gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + + multi_leds: multi-led { + compatible = "leds-group-multicolor"; + color = <LED_COLOR_ID_RGB>; + label = "status-rgb"; + function = LED_FUNCTION_INDICATOR; + leds = <&rgb_led_r>, <&rgb_led_g>, <&rgb_led_b>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk809 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + post-power-on-delay-ms = <200>; + reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>; + }; + + dc_12v: dc-12v { + compatible = "regulator-fixed"; + regulator-name = "dc_12v"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc_12v>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_host"; + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio4 RK_PC4 GPIO_ACTIVE_HIGH>; + vin-supply = <&vcc5v0_sys>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + }; + + vccio_flash: vccio-flash { + compatible = "regulator-fixed"; + regulator-name = "vccio_flash"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vccio_wl: vccio-wl { + compatible = "regulator-fixed"; + regulator-name = "vccio_wl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_3v3>; + }; +}; + +&combphy1 { + status = "okay"; +}; + +&combphy2 { + status = "okay"; +}; + +&cpu0 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu1 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu2 { + cpu-supply = <&vdd_cpu>; +}; + +&cpu3 { + cpu-supply = <&vdd_cpu>; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + avdd-0v9-supply = <&vdda0v9_image>; + avdd-1v8-supply = <&vcca1v8_image>; + status = "okay"; +}; + +&hdmi_in { + hdmi_in_vp0: endpoint { + remote-endpoint = <&vp0_out_hdmi>; + }; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + vdd_cpu: regulator@1c { + compatible = "tcs,tcs4525"; + reg = <0x1c>; + fcs,suspend-voltage-selector = <1>; + regulator-name = "vdd_cpu"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <2300>; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + rk809: pmic@20 { + compatible = "rockchip,rk809"; + reg = <0x20>; + + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>; + + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "rk808-clkout2"; + clock-names = "mclk"; + clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clocks = <&cru I2S1_MCLKOUT_TX>; + assigned-clock-parents = <&cru CLK_I2S1_8CH_TX>; + + #sound-dai-cells = <0>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>, <&i2s1m0_mclk>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc3v3_sys>; + vcc2-supply = <&vcc3v3_sys>; + vcc3-supply = <&vcc3v3_sys>; + vcc4-supply = <&vcc3v3_sys>; + vcc5-supply = <&vcc3v3_sys>; + vcc6-supply = <&vcc3v3_sys>; + vcc7-supply = <&vcc3v3_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc3v3_sys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_logic"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: DCDC_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_gpu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-initial-mode = <0x2>; + regulator-name = "vcc_ddr"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vdd_npu: DCDC_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-initial-mode = <0x2>; + regulator-name = "vdd_npu"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_image: LDO_REG1 { + regulator-boot-on; + regulator-always-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda_0v9: LDO_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda_0v9"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdda0v9_pmu: LDO_REG3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdda0v9_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + vccio_acodec: LDO_REG4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_acodec"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vccio_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_pmu: LDO_REG6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc3v3_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcca_1v8: LDO_REG7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca1v8_pmu: LDO_REG8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_pmu"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcca1v8_image: LDO_REG9 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcca1v8_image"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc_1v8"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v3: SWITCH_REG1 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc_3v3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_sd: SWITCH_REG2 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vcc3v3_sd"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + + codec { + rockchip,mic-in-differential; + }; + }; +}; + +&i2c1 { + status = "okay"; + /* Touch Screen */ +}; + +&i2c4 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c4m0_xfer>; + status = "okay"; + /* Camera */ +}; + +&i2s0_8ch { + status = "okay"; + /* HDMI */ +}; + +&i2s1_8ch { + pinctrl-names = "default"; + pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>; + rockchip,trcm-sync-tx-only; + status = "okay"; + /* PMIC */ +}; + +&i2s2_2ch { + rockchip,trcm-sync-tx-only; + status = "okay"; + /* AP6212 Bluetooth */ +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <2 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_h: wifi-host-wake-l { + rockchip,pins = <2 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + hp-detect { + hp_det: hp-det { + rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + pmic { + pmic_int: pmic_int { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + soc_slppin_gpio: soc_slppin_gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_output_low>; + }; + + soc_slppin_slp: soc_slppin_slp { + rockchip,pins = <0 RK_PA2 1 &pcfg_pull_up>; + }; + + soc_slppin_rst: soc_slppin_rst { + rockchip,pins = <0 RK_PA2 2 &pcfg_pull_none>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + vccio1-supply = <&vccio_acodec>; + vccio2-supply = <&vccio_flash>; + vccio3-supply = <&vccio_sd>; + vccio4-supply = <&vccio_wl>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_1v8>; + vccio7-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmugrf { + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x200>; + mode-normal = <BOOT_NORMAL>; + mode-loader = <BOOT_BL_DOWNLOAD>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + }; +}; + +&saradc { + vref-supply = <&vcca_1v8>; + status = "okay"; + /* Channel 0: Recovery Button */ + /* Channel 1: Hardware ID */ +}; + +&sdhci { + bus-width = <8>; + max-frequency = <200000000>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe &emmc_rstnout>; + status = "okay"; + vmmc-supply = <&vccio_flash>; + vqmmc-supply = <&vccio_flash>; +}; + +&sdmmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>; + sd-uhs-sdr104; + status = "okay"; + vmmc-supply = <&vcc3v3_sd>; + vqmmc-supply = <&vccio_sd>; +}; + +&sdmmc1 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + max-frequency = <150000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc1_bus4 &sdmmc1_cmd &sdmmc1_clk>; + sd-uhs-sdr104; + status = "okay"; + vmmc-supply = <&vccio_wl>; + vqmmc-supply = <&vccio_wl>; + #address-cells = <1>; + #size-cells = <0>; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio2>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_h>; + }; +}; + +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <0>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1m0_xfer &uart1m0_ctsn &uart1m0_rtsn>; + status = "okay"; + uart-has-rtscts; + + bluetooth: bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk809 1>; + clock-names = "lpo"; + max-speed = <3000000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + shutdown-gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>; + vbat-supply = <&vcc3v3_sys>; + vddio-supply = <&vccio_wl>; + }; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m0_xfer>; + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_xhci { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_xhci { + dr_mode = "host"; + status = "okay"; +}; + +&usb2phy0 { + status = "okay"; +}; + +&usb2phy0_host { + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&usb2phy0_otg { + phy-supply = <&vcc5v0_sys>; + status = "okay"; +}; + +&usb2phy1 { + status = "okay"; +}; + +&usb2phy1_host { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&usb2phy1_otg { + phy-supply = <&vcc5v0_host>; + status = "okay"; +}; + +&vop { + assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>; + assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>; + status = "okay"; +}; + +&vop_mmu { + status = "okay"; +}; + +&vp0 { + vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 { + reg = <ROCKCHIP_VOP2_EP_HDMI0>; + remote-endpoint = <&hdmi_in_vp0>; + }; +};
Add dts for LCKFB Taishan Pi. Working IO: * UART * RGB LED * AP6212 WiFi * AP6212 Bluetooth * SD Card * eMMC * HDMI * Mali GPU * USB Type-C * USB Type-A Signed-off-by: Junhao Xie <bigfoot@classfun.cn> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3566-lckfb-tspi.dts | 743 ++++++++++++++++++ 2 files changed, 744 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3566-lckfb-tspi.dts