diff mbox series

[04/11] usb: dwc3: imx8mp: simplify with devm_clk_get_enabled

Message ID 20240814-b4-cleanup-h-of-node-put-usb-v1-4-95481b9682bc@linaro.org (mailing list archive)
State Accepted
Commit 3fdfebc58e0ddd86f5c0da85ef5eab94bf3d674a
Headers show
Series usb: dwc3: various cleanups | expand

Commit Message

Krzysztof Kozlowski Aug. 14, 2024, 10:35 a.m. UTC 
Use devm_clk_get_enabled() to drop clock preparing and handling from
error and remove paths.  This makes the code a bit simpler.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 drivers/usb/dwc3/dwc3-imx8mp.c | 32 +++++---------------------------
 1 file changed, 5 insertions(+), 27 deletions(-)

Comments

Frank Li Aug. 14, 2024, 3:45 p.m. UTC | #1 
On Wed, Aug 14, 2024 at 12:35:40PM +0200, Krzysztof Kozlowski wrote:
> Use devm_clk_get_enabled() to drop clock preparing and handling from
> error and remove paths.  This makes the code a bit simpler.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Frank Li <Frank.Li@nxp.com>

> ---
>  drivers/usb/dwc3/dwc3-imx8mp.c | 32 +++++---------------------------
>  1 file changed, 5 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
> index 392fa1232788..8c91e595d3b9 100644
> --- a/drivers/usb/dwc3/dwc3-imx8mp.c
> +++ b/drivers/usb/dwc3/dwc3-imx8mp.c
> @@ -178,37 +178,23 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  			return PTR_ERR(dwc3_imx->glue_base);
>  	}
>
> -	dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
> +	dwc3_imx->hsio_clk = devm_clk_get_enabled(dev, "hsio");
>  	if (IS_ERR(dwc3_imx->hsio_clk)) {
>  		err = PTR_ERR(dwc3_imx->hsio_clk);
>  		dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
>  		return err;
>  	}
>
> -	err = clk_prepare_enable(dwc3_imx->hsio_clk);
> -	if (err) {
> -		dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
> -		return err;
> -	}
> -
> -	dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
> +	dwc3_imx->suspend_clk = devm_clk_get_enabled(dev, "suspend");
>  	if (IS_ERR(dwc3_imx->suspend_clk)) {
>  		err = PTR_ERR(dwc3_imx->suspend_clk);
>  		dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
> -		goto disable_hsio_clk;
> -	}
> -
> -	err = clk_prepare_enable(dwc3_imx->suspend_clk);
> -	if (err) {
> -		dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
> -		goto disable_hsio_clk;
> +		return err;
>  	}
>
>  	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		err = irq;
> -		goto disable_clks;
> -	}
> +	if (irq < 0)
> +		return irq;
>  	dwc3_imx->irq = irq;
>
>  	imx8mp_configure_glue(dwc3_imx);
> @@ -259,25 +245,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  disable_rpm:
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
> -disable_clks:
> -	clk_disable_unprepare(dwc3_imx->suspend_clk);
> -disable_hsio_clk:
> -	clk_disable_unprepare(dwc3_imx->hsio_clk);
>
>  	return err;
>  }
>
>  static void dwc3_imx8mp_remove(struct platform_device *pdev)
>  {
> -	struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
>  	struct device *dev = &pdev->dev;
>
>  	pm_runtime_get_sync(dev);
>  	of_platform_depopulate(dev);
>
> -	clk_disable_unprepare(dwc3_imx->suspend_clk);
> -	clk_disable_unprepare(dwc3_imx->hsio_clk);
> -
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
>  }
>
> --
> 2.43.0
>
Thinh Nguyen Aug. 27, 2024, 1:26 a.m. UTC | #2 
On Wed, Aug 14, 2024, Krzysztof Kozlowski wrote:
> Use devm_clk_get_enabled() to drop clock preparing and handling from
> error and remove paths.  This makes the code a bit simpler.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  drivers/usb/dwc3/dwc3-imx8mp.c | 32 +++++---------------------------
>  1 file changed, 5 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
> index 392fa1232788..8c91e595d3b9 100644
> --- a/drivers/usb/dwc3/dwc3-imx8mp.c
> +++ b/drivers/usb/dwc3/dwc3-imx8mp.c
> @@ -178,37 +178,23 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  			return PTR_ERR(dwc3_imx->glue_base);
>  	}
>  
> -	dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
> +	dwc3_imx->hsio_clk = devm_clk_get_enabled(dev, "hsio");
>  	if (IS_ERR(dwc3_imx->hsio_clk)) {
>  		err = PTR_ERR(dwc3_imx->hsio_clk);
>  		dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
>  		return err;
>  	}
>  
> -	err = clk_prepare_enable(dwc3_imx->hsio_clk);
> -	if (err) {
> -		dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
> -		return err;
> -	}
> -
> -	dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
> +	dwc3_imx->suspend_clk = devm_clk_get_enabled(dev, "suspend");
>  	if (IS_ERR(dwc3_imx->suspend_clk)) {
>  		err = PTR_ERR(dwc3_imx->suspend_clk);
>  		dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
> -		goto disable_hsio_clk;
> -	}
> -
> -	err = clk_prepare_enable(dwc3_imx->suspend_clk);
> -	if (err) {
> -		dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
> -		goto disable_hsio_clk;
> +		return err;
>  	}
>  
>  	irq = platform_get_irq(pdev, 0);
> -	if (irq < 0) {
> -		err = irq;
> -		goto disable_clks;
> -	}
> +	if (irq < 0)
> +		return irq;
>  	dwc3_imx->irq = irq;
>  
>  	imx8mp_configure_glue(dwc3_imx);
> @@ -259,25 +245,17 @@ static int dwc3_imx8mp_probe(struct platform_device *pdev)
>  disable_rpm:
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
> -disable_clks:
> -	clk_disable_unprepare(dwc3_imx->suspend_clk);
> -disable_hsio_clk:
> -	clk_disable_unprepare(dwc3_imx->hsio_clk);
>  
>  	return err;
>  }
>  
>  static void dwc3_imx8mp_remove(struct platform_device *pdev)
>  {
> -	struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
>  	struct device *dev = &pdev->dev;
>  
>  	pm_runtime_get_sync(dev);
>  	of_platform_depopulate(dev);
>  
> -	clk_disable_unprepare(dwc3_imx->suspend_clk);
> -	clk_disable_unprepare(dwc3_imx->hsio_clk);
> -
>  	pm_runtime_disable(dev);
>  	pm_runtime_put_noidle(dev);
>  }
> 
> -- 
> 2.43.0
> 

Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>

Thanks,
Thinh
diff mbox series

Patch

diff --git a/drivers/usb/dwc3/dwc3-imx8mp.c b/drivers/usb/dwc3/dwc3-imx8mp.c
index 392fa1232788..8c91e595d3b9 100644
--- a/drivers/usb/dwc3/dwc3-imx8mp.c
+++ b/drivers/usb/dwc3/dwc3-imx8mp.c
@@ -178,37 +178,23 @@  static int dwc3_imx8mp_probe(struct platform_device *pdev)
 			return PTR_ERR(dwc3_imx->glue_base);
 	}
 
-	dwc3_imx->hsio_clk = devm_clk_get(dev, "hsio");
+	dwc3_imx->hsio_clk = devm_clk_get_enabled(dev, "hsio");
 	if (IS_ERR(dwc3_imx->hsio_clk)) {
 		err = PTR_ERR(dwc3_imx->hsio_clk);
 		dev_err(dev, "Failed to get hsio clk, err=%d\n", err);
 		return err;
 	}
 
-	err = clk_prepare_enable(dwc3_imx->hsio_clk);
-	if (err) {
-		dev_err(dev, "Failed to enable hsio clk, err=%d\n", err);
-		return err;
-	}
-
-	dwc3_imx->suspend_clk = devm_clk_get(dev, "suspend");
+	dwc3_imx->suspend_clk = devm_clk_get_enabled(dev, "suspend");
 	if (IS_ERR(dwc3_imx->suspend_clk)) {
 		err = PTR_ERR(dwc3_imx->suspend_clk);
 		dev_err(dev, "Failed to get suspend clk, err=%d\n", err);
-		goto disable_hsio_clk;
-	}
-
-	err = clk_prepare_enable(dwc3_imx->suspend_clk);
-	if (err) {
-		dev_err(dev, "Failed to enable suspend clk, err=%d\n", err);
-		goto disable_hsio_clk;
+		return err;
 	}
 
 	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		err = irq;
-		goto disable_clks;
-	}
+	if (irq < 0)
+		return irq;
 	dwc3_imx->irq = irq;
 
 	imx8mp_configure_glue(dwc3_imx);
@@ -259,25 +245,17 @@  static int dwc3_imx8mp_probe(struct platform_device *pdev)
 disable_rpm:
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
-disable_clks:
-	clk_disable_unprepare(dwc3_imx->suspend_clk);
-disable_hsio_clk:
-	clk_disable_unprepare(dwc3_imx->hsio_clk);
 
 	return err;
 }
 
 static void dwc3_imx8mp_remove(struct platform_device *pdev)
 {
-	struct dwc3_imx8mp *dwc3_imx = platform_get_drvdata(pdev);
 	struct device *dev = &pdev->dev;
 
 	pm_runtime_get_sync(dev);
 	of_platform_depopulate(dev);
 
-	clk_disable_unprepare(dwc3_imx->suspend_clk);
-	clk_disable_unprepare(dwc3_imx->hsio_clk);
-
 	pm_runtime_disable(dev);
 	pm_runtime_put_noidle(dev);
 }