[0/5] TQMa6x / MBa6x DT improvements

Message

Markus Niebel Aug. 12, 2024, 2:34 p.m. UTC

This series brings following improvements:
* use a more specific compatible for the LM75 temperature sensors
  on SoM and mainboard
* move I2C pinmux entries to variants that use them and prevent
  doubled declaration
* rename node name for onboard USB hub

Alexander Stein (1):
  ARM: dts: imx6qdl: Rename USB hub node name

Markus Niebel (4):
  arm: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
  arm: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
  arm: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
  arm: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux

 arch/arm/boot/dts/nxp/imx/imx6qdl-mba6.dtsi   |  2 +-
 arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi  |  2 +-
 arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi  | 11 +---------
 arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6.dtsi  | 14 -------------
 arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6a.dtsi |  4 ++--
 arch/arm/boot/dts/nxp/imx/imx6qdl-tqma6b.dtsi | 20 +++++++++++++++++--
 6 files changed, 23 insertions(+), 30 deletions(-)

Comments

Shawn Guo Aug. 28, 2024, 3:26 a.m. UTC | #1

On Mon, Aug 12, 2024 at 04:34:26PM +0200, Markus Niebel wrote:
> This series brings following improvements:
> * use a more specific compatible for the LM75 temperature sensors
>   on SoM and mainboard
> * move I2C pinmux entries to variants that use them and prevent
>   doubled declaration
> * rename node name for onboard USB hub
> 
> Alexander Stein (1):
>   ARM: dts: imx6qdl: Rename USB hub node name
> 
> Markus Niebel (4):
>   arm: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
>   arm: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
>   arm: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
>   arm: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux

"ARM: dts: ..." please.

Shawn

Markus Niebel Aug. 28, 2024, 11:40 a.m. UTC | #2

> On Mon, Aug 12, 2024 at 04:34:26PM +0200, Markus Niebel wrote:
> > This series brings following improvements:
> > * use a more specific compatible for the LM75 temperature sensors
> >   on SoM and mainboard
> > * move I2C pinmux entries to variants that use them and prevent
> >   doubled declaration
> > * rename node name for onboard USB hub
> > 
> > Alexander Stein (1):
> >   ARM: dts: imx6qdl: Rename USB hub node name
> > 
> > Markus Niebel (4):
> >   arm: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
> >   arm: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
> >   arm: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
> >   arm: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
> 
> "ARM: dts: ..." please.
> 
> 
> Thank you for the hint, will resend.
> Shawn
> 

Markus

-- 
TQ-Systems GmbH | Mühlstraße 2, Gut Delling | 82229 Seefeld, Germany
Amtsgericht München, HRB 105018
Geschäftsführer: Detlef Schneider, Rüdiger Stahl, Stefan Schneider
http://www.tq-group.com/