| Message ID | 20240828012706.543605-4-quic_jiegan@quicinc.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Coresight: Add Coresight TMC Control Unit driver | expand |
On Wed, Aug 28, 2024 at 09:27:04AM +0800, Jie Gan wrote: > Add binding file to specify how to define a Coresight TMC > Control Unit device in device tree. > > It is responsible for controlling the data filter function > based on the source device's Trace ID for TMC ETR device. > The trace data with that Trace id can get into ETR's buffer > while other trace data gets ignored. > > Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> > --- > .../bindings/arm/qcom,coresight-ctcu.yaml | 84 +++++++++++++++++++ > 1 file changed, 84 insertions(+) > create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > > diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > new file mode 100644 > index 000000000000..669aac646451 > --- /dev/null > +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > @@ -0,0 +1,84 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/arm/qcom,coresight-ctcu.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: CoreSight TMC Control Unit > + > +maintainers: > + - Yuanfang Zhang <quic_yuanfang@quicinc.com> > + - Mao Jinlong <quic_jinlmao@quicinc.com> > + - Jie Gan <quic_jiegan@quicinc.com> > + > +description: You need '>' or '|' if you want to preserve paragraphs. > + The Trace Memory Controller(TMC) is used for Embedded Trace Buffer(ETB), > + Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) configurations. > + The configuration mode (ETB, ETF, ETR) is discovered at boot time when > + the device is probed. > + > + The Coresight TMC Control unit controls various Coresight behaviors. > + It works as a helper device when connected to TMC ETR device. > + It is responsible for controlling the data filter function based on > + the source device's Trace ID for TMC ETR device. The trace data with > + that Trace id can get into ETR's buffer while other trace data gets > + ignored. > + > +properties: > + compatible: > + enum: > + - qcom,sa8775p-ctcu > + > + reg: > + maxItems: 1 > + > + clocks: > + maxItems: 1 > + > + clock-names: > + items: > + - const: apb > + > + in-ports: Just "ports". "in-ports" is for the case when you have "out-ports". > + $ref: /schemas/graph.yaml#/properties/ports > + > + patternProperties: > + '^port(@[0-1])?$': > + description: Input connections from CoreSight Trace bus > + $ref: /schemas/graph.yaml#/properties/port > + > +required: > + - compatible > + - reg > + - in-ports > + > +additionalProperties: false > + > +examples: > + - | > + ctcu@1001000 { > + compatible = "qcom,sa8775p-ctcu"; > + reg = <0x1001000 0x1000>; > + > + clocks = <&aoss_qmp>; > + clock-names = "apb"; > + > + in-ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + ctcu_in_port0: endpoint { > + remote-endpoint = <&etr0_out_port>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + ctcu_in_port1: endpoint { > + remote-endpoint = <&etr1_out_port>; > + }; > + }; > + }; > + }; > -- > 2.34.1 >
On Wed, Aug 28, 2024 at 10:12:05AM -0500, Rob Herring wrote: > On Wed, Aug 28, 2024 at 09:27:04AM +0800, Jie Gan wrote: > > Add binding file to specify how to define a Coresight TMC > > Control Unit device in device tree. > > > > It is responsible for controlling the data filter function > > based on the source device's Trace ID for TMC ETR device. > > The trace data with that Trace id can get into ETR's buffer > > while other trace data gets ignored. > > > > Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> > > --- > > .../bindings/arm/qcom,coresight-ctcu.yaml | 84 +++++++++++++++++++ > > 1 file changed, 84 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > > > > diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > > new file mode 100644 > > index 000000000000..669aac646451 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml > > @@ -0,0 +1,84 @@ > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/arm/qcom,coresight-ctcu.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: CoreSight TMC Control Unit > > + > > +maintainers: > > + - Yuanfang Zhang <quic_yuanfang@quicinc.com> > > + - Mao Jinlong <quic_jinlmao@quicinc.com> > > + - Jie Gan <quic_jiegan@quicinc.com> > > + > > +description: > > You need '>' or '|' if you want to preserve paragraphs. Sorry for the mistake, I did not observe it by self-checking. I will add it in next version. description: -> description: | > > > + The Trace Memory Controller(TMC) is used for Embedded Trace Buffer(ETB), > > + Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) configurations. > > + The configuration mode (ETB, ETF, ETR) is discovered at boot time when > > + the device is probed. > > + > > + The Coresight TMC Control unit controls various Coresight behaviors. > > + It works as a helper device when connected to TMC ETR device. > > + It is responsible for controlling the data filter function based on > > + the source device's Trace ID for TMC ETR device. The trace data with > > + that Trace id can get into ETR's buffer while other trace data gets > > + ignored. > > + > > +properties: > > + compatible: > > + enum: > > + - qcom,sa8775p-ctcu > > + > > + reg: > > + maxItems: 1 > > + > > + clocks: > > + maxItems: 1 > > + > > + clock-names: > > + items: > > + - const: apb > > + > > + in-ports: > > Just "ports". "in-ports" is for the case when you have "out-ports". We had a discusstion about why use "in-ports" in v3. https://lore.kernel.org/linux-arm-kernel/4b51d5a9-3706-4630-83c1-01b01354d9a4@arm.com/ The individual driver must "fix" before use "ports". The question is do we need to fix the logic of the individual driver before submit this patch? > > > -- > > 2.34.1 > > Thanks, Jie
diff --git a/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml new file mode 100644 index 000000000000..669aac646451 --- /dev/null +++ b/Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/arm/qcom,coresight-ctcu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: CoreSight TMC Control Unit + +maintainers: + - Yuanfang Zhang <quic_yuanfang@quicinc.com> + - Mao Jinlong <quic_jinlmao@quicinc.com> + - Jie Gan <quic_jiegan@quicinc.com> + +description: + The Trace Memory Controller(TMC) is used for Embedded Trace Buffer(ETB), + Embedded Trace FIFO(ETF) and Embedded Trace Router(ETR) configurations. + The configuration mode (ETB, ETF, ETR) is discovered at boot time when + the device is probed. + + The Coresight TMC Control unit controls various Coresight behaviors. + It works as a helper device when connected to TMC ETR device. + It is responsible for controlling the data filter function based on + the source device's Trace ID for TMC ETR device. The trace data with + that Trace id can get into ETR's buffer while other trace data gets + ignored. + +properties: + compatible: + enum: + - qcom,sa8775p-ctcu + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb + + in-ports: + $ref: /schemas/graph.yaml#/properties/ports + + patternProperties: + '^port(@[0-1])?$': + description: Input connections from CoreSight Trace bus + $ref: /schemas/graph.yaml#/properties/port + +required: + - compatible + - reg + - in-ports + +additionalProperties: false + +examples: + - | + ctcu@1001000 { + compatible = "qcom,sa8775p-ctcu"; + reg = <0x1001000 0x1000>; + + clocks = <&aoss_qmp>; + clock-names = "apb"; + + in-ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + ctcu_in_port0: endpoint { + remote-endpoint = <&etr0_out_port>; + }; + }; + + port@1 { + reg = <1>; + ctcu_in_port1: endpoint { + remote-endpoint = <&etr1_out_port>; + }; + }; + }; + };
Add binding file to specify how to define a Coresight TMC Control Unit device in device tree. It is responsible for controlling the data filter function based on the source device's Trace ID for TMC ETR device. The trace data with that Trace id can get into ETR's buffer while other trace data gets ignored. Signed-off-by: Jie Gan <quic_jiegan@quicinc.com> --- .../bindings/arm/qcom,coresight-ctcu.yaml | 84 +++++++++++++++++++ 1 file changed, 84 insertions(+) create mode 100644 Documentation/devicetree/bindings/arm/qcom,coresight-ctcu.yaml