| Message ID | 20240828203721.2751904-22-quic_nkela@quicinc.com (mailing list archive) |
|---|---|
| State | Not Applicable |
| Headers | show |
| Series | arm64: qcom: Introduce SA8255p Ride platform | expand |
On 28/08/2024 22:37, Nikunj Kela wrote: > Add interrupt specifier for extended SPI interrupts. > > Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells. > > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- This is still bindings patch. Use proper subject prefix. Best regards, Krzysztof
On Wed, Aug 28, 2024 at 01:37:20PM -0700, Nikunj Kela wrote: > Add interrupt specifier for extended SPI interrupts. What's an "extended SPI"? Is this a GIC spec thing? If so, what version? > > Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells. > > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- > include/dt-bindings/interrupt-controller/arm-gic.h | 1 + > 1 file changed, 1 insertion(+) > > diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h > index 35b6f69b7db6..9c06248446b7 100644 > --- a/include/dt-bindings/interrupt-controller/arm-gic.h > +++ b/include/dt-bindings/interrupt-controller/arm-gic.h > @@ -12,6 +12,7 @@ > > #define GIC_SPI 0 > #define GIC_PPI 1 > +#define GIC_ESPI 2 > > /* > * Interrupt specifier cell 2. > -- > 2.34.1 >
On 8/29/2024 11:52 AM, Rob Herring wrote: > On Wed, Aug 28, 2024 at 01:37:20PM -0700, Nikunj Kela wrote: >> Add interrupt specifier for extended SPI interrupts. > What's an "extended SPI"? Is this a GIC spec thing? If so, what version? Extended SPI is an extended range of SPI interrupts supported by GIC. Excerpt below from Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml "The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI interrupts, 2 for interrupts in the Extended SPI range, 3 for the Extended PPI range. Other values are reserved for future use." "The 2nd cell contains the interrupt number for the interrupt type. SPI interrupts are in the range [0-987]. PPI interrupts are in the range [0-15]. Extented SPI interrupts are in the range [0-1023]. Extended PPI interrupts are in the range [0-127]." >> Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells. >> >> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >> --- >> include/dt-bindings/interrupt-controller/arm-gic.h | 1 + >> 1 file changed, 1 insertion(+) >> >> diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h >> index 35b6f69b7db6..9c06248446b7 100644 >> --- a/include/dt-bindings/interrupt-controller/arm-gic.h >> +++ b/include/dt-bindings/interrupt-controller/arm-gic.h >> @@ -12,6 +12,7 @@ >> >> #define GIC_SPI 0 >> #define GIC_PPI 1 >> +#define GIC_ESPI 2 >> >> /* >> * Interrupt specifier cell 2. >> -- >> 2.34.1 >>
On Thu, Aug 29, 2024 at 2:02 PM Nikunj Kela <quic_nkela@quicinc.com> wrote: > > > On 8/29/2024 11:52 AM, Rob Herring wrote: > > On Wed, Aug 28, 2024 at 01:37:20PM -0700, Nikunj Kela wrote: > >> Add interrupt specifier for extended SPI interrupts. > > What's an "extended SPI"? Is this a GIC spec thing? If so, what version? > > Extended SPI is an extended range of SPI interrupts supported by GIC. > > Excerpt below from > Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml > > "The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI > interrupts, 2 for interrupts in the Extended SPI range, 3 for the > Extended PPI range. Other values are reserved for future use." > > "The 2nd cell contains the interrupt number for the interrupt type. SPI > interrupts are in the range [0-987]. PPI interrupts are in the range > [0-15]. Extented SPI interrupts are in the range [0-1023]. Extended PPI > interrupts are in the range [0-127]." Looks like you should add EPPI define too while you're here. Rob
On 8/30/2024 7:44 AM, Rob Herring wrote: > On Thu, Aug 29, 2024 at 2:02 PM Nikunj Kela <quic_nkela@quicinc.com> wrote: >> >> On 8/29/2024 11:52 AM, Rob Herring wrote: >>> On Wed, Aug 28, 2024 at 01:37:20PM -0700, Nikunj Kela wrote: >>>> Add interrupt specifier for extended SPI interrupts. >>> What's an "extended SPI"? Is this a GIC spec thing? If so, what version? >> Extended SPI is an extended range of SPI interrupts supported by GIC. >> >> Excerpt below from >> Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.yaml >> >> "The 1st cell is the interrupt type; 0 for SPI interrupts, 1 for PPI >> interrupts, 2 for interrupts in the Extended SPI range, 3 for the >> Extended PPI range. Other values are reserved for future use." >> >> "The 2nd cell contains the interrupt number for the interrupt type. SPI >> interrupts are in the range [0-987]. PPI interrupts are in the range >> [0-15]. Extented SPI interrupts are in the range [0-1023]. Extended PPI >> interrupts are in the range [0-127]." > Looks like you should add EPPI define too while you're here. > > Rob Sure Rob. I can add that. Generally, there is an ask for a usecase before we push anything that is used in DT. I won't have any usecase to show for EPPI.
diff --git a/include/dt-bindings/interrupt-controller/arm-gic.h b/include/dt-bindings/interrupt-controller/arm-gic.h index 35b6f69b7db6..9c06248446b7 100644 --- a/include/dt-bindings/interrupt-controller/arm-gic.h +++ b/include/dt-bindings/interrupt-controller/arm-gic.h @@ -12,6 +12,7 @@ #define GIC_SPI 0 #define GIC_PPI 1 +#define GIC_ESPI 2 /* * Interrupt specifier cell 2.
Add interrupt specifier for extended SPI interrupts. Qualcomm SA8255p platform uses extended SPI for SCMI 'a2p' doorbells. Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> --- include/dt-bindings/interrupt-controller/arm-gic.h | 1 + 1 file changed, 1 insertion(+)