| Message ID | 5f5487e1-e458-4a3a-af02-c52e50ca1964@oldschoolsolutions.biz (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | [v1] arm64: dts: qcom: sc8280xp-wdk2023: dt definition for WDK2023 | expand |
Hi! Amazing to see this device submitted! See few comments below On Thu, Aug 29, 2024 at 01:47:13PM GMT, Jens Glathe wrote: > "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra" > > Device tree for the Windows Dev Kit 2023. This work > is based on the initial work of Merck Hung <merckhung@gmail.com>. > I believe you wanted to add Co-developed-by: Merck Hung <merckhung@gmail.com> and perhaps move these historical notes under --- at the end of the commit message? > Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts > > This dt is more or less deducted from the Thinkpad X13s. > It contains a lot of guesswork, and also a lot of research on > what works with the Windows Dev Kit. > > It is in use and under development since May 2023, pretty stable now. > > Signed-off-by: Merck Hung <merckhung@gmail.com> > Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> > --- > arch/arm64/boot/dts/qcom/Makefile | 1 + > .../dts/qcom/sc8280xp-microsoft-blackrock.dts | 1334 +++++++++++++++++ > 2 files changed, 1335 insertions(+) > create mode 100644 > arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > diff --git a/arch/arm64/boot/dts/qcom/Makefile > b/arch/arm64/boot/dts/qcom/Makefile > index 197ab325c0b9e..d71d87abdb3fb 100644 > --- a/arch/arm64/boot/dts/qcom/Makefile > +++ b/arch/arm64/boot/dts/qcom/Makefile > @@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb > +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-blackrock.dtb > dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb > dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > new file mode 100644 > index 0000000000000..af28897f0de3d > --- /dev/null > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > @@ -0,0 +1,1334 @@ > +// SPDX-License-Identifier: BSD-3-Clause > +/* > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022, Linaro Limited > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> > +#include <dt-bindings/gpio/gpio.h> > +#include <dt-bindings/input/gpio-keys.h> > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > + > +#include "sc8280xp.dtsi" > +#include "sc8280xp-pmics.dtsi" > + > +/ { > + model = "Windows Dev Kit 2023"; Maybe "Microsoft Windows..."? > + compatible = "microsoft,win-dev-kit-2023", "qcom,sc8280xp"; I think you want to document this compatible... Have you run checkpatch.pl and make dtbs_check on this patch? > + > + aliases { > + i2c4 = &i2c4; > + i2c21 = &i2c21; > + serial1 = &uart2; > + }; > + > + wcd938x: audio-codec { > + compatible = "qcom,wcd9380-codec"; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wcd_default>; In all instances, -names usually comes after -N. > + > + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; > + > + vdd-buck-supply = <&vreg_s10b>; > + vdd-rxtx-supply = <&vreg_s10b>; > + vdd-io-supply = <&vreg_s10b>; > + vdd-mic-bias-supply = <&vreg_bob>; > + > + qcom,micbias1-microvolt = <1800000>; > + qcom,micbias2-microvolt = <1800000>; > + qcom,micbias3-microvolt = <1800000>; > + qcom,micbias4-microvolt = <1800000>; > + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 > 500000 500000 500000 500000 500000>; This seems like this patch is indented with spaces and folded, any chance your MTA corrupted it? > + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; > + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; > + qcom,rx-device = <&wcd_rx>; > + qcom,tx-device = <&wcd_tx>; > + > + #sound-dai-cells = <1>; > + }; > + > + firmware { > + qseecom { > + compatible = "qcom,qseecom-sc8280xp", "qcom,qseecom"; > + qcom,scm = <&scm>; > + }; > + }; > + > + pmic-glink { > + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; > + > + #address-cells = <1>; > + #size-cells = <0>; > + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, > + <&tlmm 49 GPIO_ACTIVE_HIGH>; > + > + connector@0 { > + compatible = "usb-c-connector"; > + reg = <0>; > + power-role = "source"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + > + pmic_glink_con0_hs: endpoint { > + remote-endpoint = <&usb_0_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_con0_ss: endpoint { > + remote-endpoint = <&usb_0_qmpphy_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + pmic_glink_con0_sbu: endpoint { > + remote-endpoint = <&usb0_sbu_mux>; > + }; > + }; > + }; > + }; > + > + connector@1 { > + compatible = "usb-c-connector"; > + reg = <1>; > + power-role = "source"; > + data-role = "dual"; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + port@0 { > + reg = <0>; > + > + pmic_glink_con1_hs: endpoint { > + remote-endpoint = <&usb_1_dwc3_hs>; > + }; > + }; > + > + port@1 { > + reg = <1>; > + > + pmic_glink_con1_ss: endpoint { > + remote-endpoint = <&usb_1_qmpphy_out>; > + }; > + }; > + > + port@2 { > + reg = <2>; > + > + pmic_glink_con1_sbu: endpoint { > + remote-endpoint = <&usb1_sbu_mux>; > + }; > + }; > + }; > + }; > + }; > + > + dp1-connector@0 { > + compatible = "dp-connector"; > + label = "DP1"; > + type = "mini"; > + > + dp-pwr-supply = <&vreg_misc_3p3>; > + > + //hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; Is there a reason this is commented out? > + > + port { > + dp1_connector_in: endpoint { > + remote-endpoint = <&mdss0_dp2_phy_out>; > + }; > + }; > + }; > + > + vreg_misc_3p3: regulator-misc-3p3 { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3B"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&misc_3p3_reg_en>; > + > + regulator-boot-on; > + regulator-always-on; > + }; > + > + vreg_nvme: regulator-nvme { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3_SSD"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&nvme_reg_en>; > + > + regulator-boot-on; > + }; > + > + vreg_vph_pwr: regulator-vph-pwr { > + compatible = "regulator-fixed"; > + > + regulator-name = "VPH_VCC3R9"; > + regulator-min-microvolt = <3900000>; > + regulator-max-microvolt = <3900000>; > + > + regulator-always-on; > + }; > + > + vreg_wlan: regulator-wlan { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC_WLAN_3R9"; > + regulator-min-microvolt = <3900000>; > + regulator-max-microvolt = <3900000>; > + > + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&hastings_reg_en>; > + > + regulator-boot-on; > + }; > + > + vreg_wwan: regulator-wwan { > + compatible = "regulator-fixed"; > + > + regulator-name = "VCC3B_WAN"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&wwan_sw_en>; > + > + regulator-boot-on; > + }; > + > + reserved-memory { > + gpu_mem: gpu-mem@8bf00000 { > + reg = <0 0x8bf00000 0 0x2000>; > + no-map; > + }; > + > + linux,cma { > + compatible = "shared-dma-pool"; > + size = <0x0 0x8000000>; > + reusable; > + linux,cma-default; > + }; > + }; > + > + usb0-sbu-mux { > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > + > + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; > + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&usb0_sbu_default>; > + > + mode-switch; > + orientation-switch; > + > + port { > + usb0_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_con0_sbu>; > + }; > + }; > + }; > + > + usb1-sbu-mux { > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > + > + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; > + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&usb1_sbu_default>; > + > + mode-switch; > + orientation-switch; > + > + port { > + usb1_sbu_mux: endpoint { > + remote-endpoint = <&pmic_glink_con1_sbu>; > + }; > + }; > + }; > +}; > + > +&apps_rsc { > + regulators-0 { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "b"; > + > + vdd-s10-supply = <&vreg_vph_pwr>; > + vdd-s11-supply = <&vreg_vph_pwr>; > + vdd-s12-supply = <&vreg_vph_pwr>; > + vdd-l1-l4-supply = <&vreg_s12b>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_s11b>; > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > + vdd-l8-supply = <&vreg_s12b>; > + > + vreg_s10b: smps10 { > + regulator-name = "vreg_s10b"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_s11b: smps11 { > + regulator-name = "vreg_s11b"; > + regulator-min-microvolt = <1272000>; > + regulator-max-microvolt = <1272000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_s12b: smps12 { > + regulator-name = "vreg_s12b"; > + regulator-min-microvolt = <984000>; > + regulator-max-microvolt = <984000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_l1b: ldo1 { > + regulator-name = "vreg_l1b"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3b: ldo3 { > + regulator-name = "vreg_l3b"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-boot-on; > + }; > + > + vreg_l4b: ldo4 { > + regulator-name = "vreg_l4b"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6b: ldo6 { > + regulator-name = "vreg_l6b"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-boot-on; > + }; > + }; > + > + regulators-1 { > + compatible = "qcom,pm8350c-rpmh-regulators"; > + qcom,pmic-id = "c"; > + > + vdd-bob-supply = <&vreg_vph_pwr>; > + vdd-l1-l12-supply = <&vreg_s1c>; > + vdd-l2-l8-supply = <&vreg_s1c>; > + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; > + vdd-l6-l9-l11-supply = <&vreg_bob>; > + vdd-l10-supply = <&vreg_s11b>; > + > + vreg_s1c: smps1 { > + regulator-name = "vreg_s1c"; > + regulator-min-microvolt = <1880000>; > + regulator-max-microvolt = <1900000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-always-on; > + }; > + > + vreg_l1c: ldo1 { > + regulator-name = "vreg_l1c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6c: ldo6 { > + regulator-name = "vreg_l6c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7c: ldo7 { > + regulator-name = "vreg_l7c"; > + regulator-min-microvolt = <2504000>; > + regulator-max-microvolt = <2504000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8c: ldo8 { > + regulator-name = "vreg_l8c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9c: ldo9 { > + regulator-name = "vreg_l9c"; > + regulator-min-microvolt = <2960000>; > + regulator-max-microvolt = <2960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l12c: ldo12 { > + regulator-name = "vreg_l12c"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l13c: ldo13 { > + regulator-name = "vreg_l13c"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_bob: bob { > + regulator-name = "vreg_bob"; > + regulator-min-microvolt = <3008000>; > + regulator-max-microvolt = <3960000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > + regulator-always-on; > + }; > + }; > + > + regulators-2 { > + compatible = "qcom,pm8350-rpmh-regulators"; > + qcom,pmic-id = "d"; > + > + vdd-l1-l4-supply = <&vreg_s11b>; > + vdd-l2-l7-supply = <&vreg_bob>; > + vdd-l3-l5-supply = <&vreg_s11b>; > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > + vdd-l8-supply = <&vreg_s12b>; > + > + vreg_l2d: ldo2 { > + regulator-name = "vreg_l2d"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l3d: ldo3 { > + regulator-name = "vreg_l3d"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + regulator-allow-set-load; > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > + RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l4d: ldo4 { > + regulator-name = "vreg_l4d"; > + regulator-min-microvolt = <1200000>; > + regulator-max-microvolt = <1200000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l6d: ldo6 { > + regulator-name = "vreg_l6d"; > + regulator-min-microvolt = <880000>; > + regulator-max-microvolt = <880000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l7d: ldo7 { > + regulator-name = "vreg_l7d"; > + regulator-min-microvolt = <3072000>; > + regulator-max-microvolt = <3072000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l8d: ldo8 { > + regulator-name = "vreg_l8d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l9d: ldo9 { > + regulator-name = "vreg_l9d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + > + vreg_l10d: ldo10 { > + regulator-name = "vreg_l10d"; > + regulator-min-microvolt = <912000>; > + regulator-max-microvolt = <912000>; > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > + }; > + }; > +}; > + > +&dispcc0 { > + status = "okay"; > +}; > + > +&gpu { > + status = "okay"; > + > + zap-shader { > + memory-region = <&gpu_mem>; > + firmware-name = > "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcdxkmsuc8280.mbn"; > + }; > +}; > + > +&mdss0 { > + status = "okay"; > +}; > + > +&mdss0_dp0 { > + status = "okay"; > +}; > + > +&mdss0_dp0_out { > + data-lanes = <0 1>; > + remote-endpoint = <&usb_0_qmpphy_dp_in>; > +}; > + > +&mdss0_dp1 { > + status = "okay"; > +}; > + > +&mdss0_dp1_out { > + data-lanes = <0 1>; > + remote-endpoint = <&usb_1_qmpphy_dp_in>; > +}; > + > +&mdss0_dp2 { > + compatible = "qcom,sc8280xp-dp"; > + > + data-lanes = <0 1 2 3>; > + > + status = "okay"; > + > + ports { > + port@1 { > + reg = <1>; > + mdss0_dp2_phy_out: endpoint { > + remote-endpoint = <&dp1_connector_in>; > + }; > + }; > + }; > +}; > + > +&mdss0_dp2_phy { > + compatible = "qcom,sc8280xp-dp-phy"; > + > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda-pll-supply = <&vreg_l6b>; > + pll-supply = <&vreg_l6b>; > + > + status = "okay"; > +}; > + > +&pcie2a { > + aspm-no-l0s; > + max-link-speed = <16>; > + > + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_nvme>; > + pcie-vdda-supply = <&vreg_l7d>; > + vdda-supply = <&vreg_l7d>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie2a_default>; > + > + status = "okay"; > +}; > + > +&pcie2a_phy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l6d>; > + pll-supply = <&vreg_l6d>; > + > + status = "okay"; > +}; > + > +&pcie4 { > + max-link-speed = <2>; > + aspm-no-l0s; > + > + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; > + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; > + > + vddpe-3v3-supply = <&vreg_wlan>; > + pcie-vdda-supply = <&vreg_l7d>; > + vdda-supply = <&vreg_l7d>; > + > + pinctrl-names = "default"; > + pinctrl-0 = <&pcie4_default>; > + > + status = "okay"; > +}; > + > +&pcie4_port0 { > + wifi@0 { > + compatible = "pci17cb,1103"; > + reg = <0x10000 0x0 0x0 0x0 0x0>; > + > + qcom,ath11k-calibration-variant = "volterra"; > + }; > +}; > + > +&pcie4_phy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l6d>; > + pll-supply = <&vreg_l6d>; > + > + status = "okay"; > +}; > + > +&pmc8280c_lpg { > + status = "okay"; > +}; > + > +&pmk8280_adc_tm { > + status = "okay"; > + > + sys-therm@0 { > + reg = <0>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@1 { > + reg = <1>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@2 { > + reg = <2>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@3 { > + reg = <3>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@4 { > + reg = <4>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@5 { > + reg = <5>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@6 { > + reg = <6>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > + > + sys-therm@7 { > + reg = <7>; > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > + qcom,hw-settle-time-us = <200>; > + qcom,avg-samples = <2>; > + qcom,ratiometric; > + }; > +}; > + > +&pmk8280_pon_pwrkey { > + status = "okay"; > +}; > + > +&pmk8280_pon_resin { > + status = "okay"; > +}; > + > +&pmk8280_rtc { > + nvmem-cells = <&rtc_offset>; > + nvmem-cell-names = "offset"; > + > + status = "okay"; > +}; > + > +&pmk8280_sdam_6 { > + status = "okay"; > + > + rtc_offset: rtc-offset@bc { > + reg = <0xbc 0x4>; > + }; > +}; > + > +&pmk8280_vadc { > + status = "okay"; > + > + channel@144 { > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm1"; > + }; > + > + channel@145 { > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm2"; > + }; > + > + channel@146 { > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm3"; > + }; > + > + channel@147 { > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm4"; > + }; > + > + channel@344 { > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm5"; > + }; > + > + channel@345 { > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm6"; > + }; > + > + channel@346 { > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm7"; > + }; > + > + channel@347 { > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > + qcom,hw-settle-time = <200>; > + qcom,ratiometric; > + label = "sys_therm8"; > + }; > +}; > + > +&qup0 { > + status = "okay"; > +}; > + > +&qup1 { > + status = "okay"; > +}; > + > +&qup2 { > + status = "okay"; > +}; > + > +&remoteproc_adsp { > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcadsp8280.mbn"; > + > + status = "okay"; > +}; > + > +&remoteproc_nsp0 { > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qccdsp8280.mbn"; > + > + status = "okay"; > +}; > + > +&rxmacro { > + status = "okay"; > +}; > + > +&sound { > + compatible = "qcom,sc8280xp-sndcard"; > + model = "MICROSOFT/DEVKIT23/devkit23"; > + audio-routing = > + "SpkrLeft IN", "WSA_SPK1 OUT", > + "SpkrRight IN", "WSA_SPK2 OUT", > + "IN1_HPHL", "HPHL_OUT", > + "IN2_HPHR", "HPHR_OUT", > + "AMIC2", "MIC BIAS2", > + "VA DMIC0", "MIC BIAS1", > + "VA DMIC1", "MIC BIAS1", > + "VA DMIC2", "MIC BIAS3", > + "VA DMIC0", "VA MIC BIAS1", > + "VA DMIC1", "VA MIC BIAS1", > + "VA DMIC2", "VA MIC BIAS3", > + "TX SWR_ADC1", "ADC2_OUTPUT"; > + > + wcd-playback-dai-link { > + link-name = "WCD Playback"; > + cpu { > + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wcd-capture-dai-link { > + link-name = "WCD Capture"; > + cpu { > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; > + }; > + > + codec { > + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + wsa-dai-link { > + link-name = "WSA Playback"; > + cpu { > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > + }; > + > + codec { > + sound-dai = <&swr0 0>, <&wsamacro 0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + }; > + > + va-dai-link { > + link-name = "VA Capture"; > + cpu { > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; > + }; > + > + platform { > + sound-dai = <&q6apm>; > + }; > + > + codec { > + sound-dai = <&vamacro 0>; > + }; > + }; > +}; > + > +&swr0 { > + status = "okay"; > +}; > + > +&swr1 { > + status = "okay"; > + > + wcd_rx: wcd9380-rx@0,4 { > + compatible = "sdw20217010d00"; > + reg = <0 4>; > + qcom,rx-port-mapping = <1 2 3 4 5>; > + }; > +}; > + > +&swr2 { > + status = "okay"; > + > + wcd_tx: wcd9380-tx@0,3 { > + compatible = "sdw20217010d00"; > + reg = <0 3>; > + qcom,tx-port-mapping = <1 1 2 3>; > + }; > +}; > + > +&txmacro { > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-0 = <&uart2_default>; > + pinctrl-names = "default"; > + > + status = "okay"; > + > + bluetooth { > + compatible = "qcom,wcn6855-bt"; > + > + vddio-supply = <&vreg_s10b>; > + vddbtcxmx-supply = <&vreg_s12b>; > + vddrfacmn-supply = <&vreg_s12b>; > + vddrfa0p8-supply = <&vreg_s12b>; > + vddrfa1p2-supply = <&vreg_s11b>; > + vddrfa1p7-supply = <&vreg_s1c>; > + > + max-speed = <3200000>; > + > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > + > + pinctrl-0 = <&bt_default>; > + pinctrl-names = "default"; > + }; > +}; > + > +&usb_0 { > + status = "okay"; > +}; > + > +&usb_0_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_0_dwc3_hs { > + remote-endpoint = <&pmic_glink_con0_hs>; > +}; > + > +&usb_0_hsphy { > + vdda-pll-supply = <&vreg_l9d>; > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_0_qmpphy { > + vdda-phy-supply = <&vreg_l4d>; > + phy-supply = <&vreg_l4d>; > + vdda-pll-supply = <&vreg_l9d>; > + pll-supply = <&vreg_l9d>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_0_qmpphy_dp_in { > + remote-endpoint = <&mdss0_dp0_out>; > +}; > + > +&usb_0_qmpphy_out { > + remote-endpoint = <&pmic_glink_con0_ss>; > +}; > + > +&usb_1 { > + status = "okay"; > +}; > + > +&usb_1_dwc3 { > + dr_mode = "host"; > +}; > + > +&usb_1_dwc3_hs { > + remote-endpoint = <&pmic_glink_con1_hs>; > +}; > + > +&usb_1_hsphy { > + vdda-pll-supply = <&vreg_l4b>; > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l13c>; > + > + status = "okay"; > +}; > + > +&usb_1_qmpphy { > + vdda-phy-supply = <&vreg_l3b>; > + phy-supply = <&vreg_l3b>; > + vdda-pll-supply = <&vreg_l4b>; > + pll-supply = <&vreg_l4b>; > + > + orientation-switch; > + > + status = "okay"; > +}; > + > +&usb_1_qmpphy_dp_in { > + remote-endpoint = <&mdss0_dp1_out>; > +}; > + > +&usb_1_qmpphy_out { > + remote-endpoint = <&pmic_glink_con1_ss>; > +}; > + > +&usb_2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&usb2_en_state>; > + > + status = "okay"; > +}; > + > +&usb_2_dwc3 { > + dr_mode = "host"; > + phy-names = "usb2-port0", "usb3-port0"; > + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy0 { > + vdda-pll-supply = <&vreg_l1b>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy1 { > + vdda-pll-supply = <&vreg_l8d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l1c>; > + vdda33-supply = <&vreg_l7d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy2 { > + vdda-pll-supply = <&vreg_l10d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l8c>; > + vdda33-supply = <&vreg_l2d>; > + > + status = "okay"; > +}; > + > +&usb_2_hsphy3 { > + vdda-pll-supply = <&vreg_l10d>; > + vdda-phy-supply = <&vreg_l3d>; > + phy-supply = <&vreg_l3d>; > + vdda18-supply = <&vreg_l8c>; > + vdda33-supply = <&vreg_l2d>; > + > + status = "okay"; > +}; > + > +&usb_2_qmpphy0 { > + vdda-phy-supply = <&vreg_l1b>; > + phy-supply = <&vreg_l1b>; > + vdda-pll-supply = <&vreg_l4d>; > + pll-supply = <&vreg_l4d>; > + status = "okay"; > +}; > + > +&usb_2_qmpphy1 { > + vdda-phy-supply = <&vreg_l8d>; > + phy-supply = <&vreg_l8d>; > + vdda-pll-supply = <&vreg_l4d>; > + pll-supply = <&vreg_l4d>; > + status = "okay"; > +}; > + > +&vamacro { > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; > + pinctrl-names = "default"; > + > + vdd-micb-supply = <&vreg_s10b>; > + > + qcom,dmic-sample-rate = <4800000>; > + > + status = "okay"; > +}; > + > +&wsamacro { > + status = "okay"; > +}; > + > +&xo_board_clk { > + clock-frequency = <38400000>; > +}; > + > +/* PINCTRL */ > + > +&lpass_tlmm { > + status = "okay"; > +}; > + > +&pmc8280_1_gpios { > + edp_bl_en: edp-bl-en-state { > + pins = "gpio8"; > + function = "normal"; > + }; > + > + edp_bl_reg_en: edp-bl-reg-en-state { > + pins = "gpio9"; > + function = "normal"; > + }; > + > + misc_3p3_reg_en: misc-3p3-reg-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&pmc8280_2_gpios { > + wwan_sw_en: wwan-sw-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&pmc8280c_gpios { > + edp_bl_pwm: edp-bl-pwm-state { > + pins = "gpio8"; > + function = "func1"; > + }; > +}; > + > +&pmr735a_gpios { > + hastings_reg_en: hastings-reg-en-state { > + pins = "gpio1"; > + function = "normal"; > + }; > +}; > + > +&tlmm { > + gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; > + > + bt_default: bt-default-state { > + hstp-bt-en-pins { > + pins = "gpio133"; > + function = "gpio"; > + drive-strength = <16>; > + bias-disable; > + }; > + > + hstp-sw-ctrl-pins { > + pins = "gpio132"; > + function = "gpio"; > + bias-pull-down; > + }; > + }; > + > + nvme_reg_en: nvme-reg-en-state { > + pins = "gpio135"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + pcie2a_default: pcie2a-default-state { > + clkreq-n-pins { > + pins = "gpio142"; > + function = "pcie2a_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio143"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio145"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie3a_default: pcie3a-default-state { > + clkreq-n-pins { > + pins = "gpio150"; > + function = "pcie3a_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio151"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio148"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + pcie4_default: pcie4-default-state { > + clkreq-n-pins { > + pins = "gpio140"; > + function = "pcie4_clkreq"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + > + perst-n-pins { > + pins = "gpio141"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + wake-n-pins { > + pins = "gpio139"; > + function = "gpio"; > + drive-strength = <2>; > + bias-pull-up; > + }; > + }; > + > + uart2_default: uart2-default-state { > + cts-pins { > + pins = "gpio121"; > + function = "qup2"; > + bias-bus-hold; > + }; > + > + rts-pins { > + pins = "gpio122"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + > + rx-pins { > + pins = "gpio124"; > + function = "qup2"; > + bias-pull-up; > + }; > + > + tx-pins { > + pins = "gpio123"; > + function = "qup2"; > + drive-strength = <2>; > + bias-disable; > + }; > + }; > + > + usb0_sbu_default: usb0-sbu-state { > + oe-n-pins { > + pins = "gpio101"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + output-high; > + }; > + > + sel-pins { > + pins = "gpio164"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + }; > + }; > + > + usb1_sbu_default: usb1-sbu-state { > + oe-n-pins { > + pins = "gpio48"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + output-high; > + }; > + > + sel-pins { > + pins = "gpio47"; > + function = "gpio"; > + bias-disable; > + drive-strength = <16>; > + }; > + }; > + > + usb2_en_state: usb2-en-state { > + /* TS3USB221A USB2.0 mux select */ > + pins = "gpio24"; > + function = "gpio"; > + drive-strength = <2>; > + bias-disable; > + output-low; > + }; > + > + wcd_default: wcd-default-state { > + reset-pins { > + pins = "gpio106"; > + function = "gpio"; > + bias-disable; > + }; > + }; > +}; > -- > 2.43.0 >
On 29.08.2024 1:47 PM, Jens Glathe wrote: > "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra" > > Device tree for the Windows Dev Kit 2023. This work > is based on the initial work of Merck Hung <merckhung@gmail.com>. > > Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts > > This dt is more or less deducted from the Thinkpad X13s. > It contains a lot of guesswork, and also a lot of research on > what works with the Windows Dev Kit. > > It is in use and under development since May 2023, pretty stable now. > > Signed-off-by: Merck Hung <merckhung@gmail.com> > Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> > --- microsoft,volterra please fix the spaces and wrapping, add bindings and resend Konrad
On 29.08.2024 6:37 PM, Konrad Dybcio wrote: > On 29.08.2024 1:47 PM, Jens Glathe wrote: >> "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra" >> >> Device tree for the Windows Dev Kit 2023. This work >> is based on the initial work of Merck Hung <merckhung@gmail.com>. >> >> Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts >> >> This dt is more or less deducted from the Thinkpad X13s. >> It contains a lot of guesswork, and also a lot of research on >> what works with the Windows Dev Kit. >> >> It is in use and under development since May 2023, pretty stable now. >> >> Signed-off-by: Merck Hung <merckhung@gmail.com> >> Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> >> --- > > microsoft,volterra sorry this one was called blackrock, volterra is a marketing name Konrad
On Thu, Aug 29, 2024 at 05:11:37PM GMT, Nikita Travkin wrote: > Hi! Amazing to see this device submitted! See few comments below > I fully agree! > On Thu, Aug 29, 2024 at 01:47:13PM GMT, Jens Glathe wrote: > > "Microsoft Windows Dev Kit 2023" aka "Blackrock" aka "Project Volterra" > > > > Device tree for the Windows Dev Kit 2023. This work > > is based on the initial work of Merck Hung <merckhung@gmail.com>. > > > > I believe you wanted to add > > Co-developed-by: Merck Hung <merckhung@gmail.com> > If the two collaborated on the actual patch this would be appropriate. But, if you, Jens, created this patch based on some previous work by Merck's I find it perfectly appropriate to list yourself as author, Sign-off-by according to developer certification of origin 1.1 b ("The contribution is based upon previous work that..."), and give Merck credit for his work as you do here. > and perhaps move these historical notes under --- at the end of the > commit message? > > > Original work: https://github.com/merckhung/linux_ms_dev_kit/blob/ms-dev-kit-2023-v6.3.0/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-dev-kit-2023.dts I think this would be suitable as a Link: among the trailers below. > > > > This dt is more or less deducted from the Thinkpad X13s. > > It contains a lot of guesswork, and also a lot of research on > > what works with the Windows Dev Kit. > > > > It is in use and under development since May 2023, pretty stable now. > > > > Signed-off-by: Merck Hung <merckhung@gmail.com> The first certificate of origin of the patch, should however match the author. So you should either drop this, keep Merck as the author, or if the two of you collaborated add a Co-developed-by - as suggested by Nikita. Regards, Bjorn > > Signed-off-by: Jens Glathe <jens.glathe@oldschoolsolutions.biz> > > --- > > arch/arm64/boot/dts/qcom/Makefile | 1 + > > .../dts/qcom/sc8280xp-microsoft-blackrock.dts | 1334 +++++++++++++++++ > > 2 files changed, 1335 insertions(+) > > create mode 100644 > > arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > > > diff --git a/arch/arm64/boot/dts/qcom/Makefile > > b/arch/arm64/boot/dts/qcom/Makefile > > index 197ab325c0b9e..d71d87abdb3fb 100644 > > --- a/arch/arm64/boot/dts/qcom/Makefile > > +++ b/arch/arm64/boot/dts/qcom/Makefile > > @@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb > > +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-blackrock.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb > > dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb > > diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > new file mode 100644 > > index 0000000000000..af28897f0de3d > > --- /dev/null > > +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts > > @@ -0,0 +1,1334 @@ > > +// SPDX-License-Identifier: BSD-3-Clause > > +/* > > + * Copyright (c) 2021, The Linux Foundation. All rights reserved. > > + * Copyright (c) 2022, Linaro Limited > > + */ > > + > > +/dts-v1/; > > + > > +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/gpio-keys.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> > > + > > +#include "sc8280xp.dtsi" > > +#include "sc8280xp-pmics.dtsi" > > + > > +/ { > > + model = "Windows Dev Kit 2023"; > > Maybe "Microsoft Windows..."? > > > + compatible = "microsoft,win-dev-kit-2023", "qcom,sc8280xp"; > > I think you want to document this compatible... Have you run > checkpatch.pl and make dtbs_check on this patch? > > > + > > + aliases { > > + i2c4 = &i2c4; > > + i2c21 = &i2c21; > > + serial1 = &uart2; > > + }; > > + > > + wcd938x: audio-codec { > > + compatible = "qcom,wcd9380-codec"; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&wcd_default>; > > In all instances, -names usually comes after -N. > > > + > > + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; > > + > > + vdd-buck-supply = <&vreg_s10b>; > > + vdd-rxtx-supply = <&vreg_s10b>; > > + vdd-io-supply = <&vreg_s10b>; > > + vdd-mic-bias-supply = <&vreg_bob>; > > + > > + qcom,micbias1-microvolt = <1800000>; > > + qcom,micbias2-microvolt = <1800000>; > > + qcom,micbias3-microvolt = <1800000>; > > + qcom,micbias4-microvolt = <1800000>; > > + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 > > 500000 500000 500000 500000 500000>; > > This seems like this patch is indented with spaces and folded, any chance > your MTA corrupted it? > > > + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; > > + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; > > + qcom,rx-device = <&wcd_rx>; > > + qcom,tx-device = <&wcd_tx>; > > + > > + #sound-dai-cells = <1>; > > + }; > > + > > + firmware { > > + qseecom { > > + compatible = "qcom,qseecom-sc8280xp", "qcom,qseecom"; > > + qcom,scm = <&scm>; > > + }; > > + }; > > + > > + pmic-glink { > > + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; > > + > > + #address-cells = <1>; > > + #size-cells = <0>; > > + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, > > + <&tlmm 49 GPIO_ACTIVE_HIGH>; > > + > > + connector@0 { > > + compatible = "usb-c-connector"; > > + reg = <0>; > > + power-role = "source"; > > + data-role = "dual"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + > > + port@0 { > > + reg = <0>; > > + > > + pmic_glink_con0_hs: endpoint { > > + remote-endpoint = <&usb_0_dwc3_hs>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + pmic_glink_con0_ss: endpoint { > > + remote-endpoint = <&usb_0_qmpphy_out>; > > + }; > > + }; > > + > > + port@2 { > > + reg = <2>; > > + > > + pmic_glink_con0_sbu: endpoint { > > + remote-endpoint = <&usb0_sbu_mux>; > > + }; > > + }; > > + }; > > + }; > > + > > + connector@1 { > > + compatible = "usb-c-connector"; > > + reg = <1>; > > + power-role = "source"; > > + data-role = "dual"; > > + > > + ports { > > + #address-cells = <1>; > > + #size-cells = <0>; > > + port@0 { > > + reg = <0>; > > + > > + pmic_glink_con1_hs: endpoint { > > + remote-endpoint = <&usb_1_dwc3_hs>; > > + }; > > + }; > > + > > + port@1 { > > + reg = <1>; > > + > > + pmic_glink_con1_ss: endpoint { > > + remote-endpoint = <&usb_1_qmpphy_out>; > > + }; > > + }; > > + > > + port@2 { > > + reg = <2>; > > + > > + pmic_glink_con1_sbu: endpoint { > > + remote-endpoint = <&usb1_sbu_mux>; > > + }; > > + }; > > + }; > > + }; > > + }; > > + > > + dp1-connector@0 { > > + compatible = "dp-connector"; > > + label = "DP1"; > > + type = "mini"; > > + > > + dp-pwr-supply = <&vreg_misc_3p3>; > > + > > + //hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; > > Is there a reason this is commented out? > > > + > > + port { > > + dp1_connector_in: endpoint { > > + remote-endpoint = <&mdss0_dp2_phy_out>; > > + }; > > + }; > > + }; > > + > > + vreg_misc_3p3: regulator-misc-3p3 { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VCC3B"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&misc_3p3_reg_en>; > > + > > + regulator-boot-on; > > + regulator-always-on; > > + }; > > + > > + vreg_nvme: regulator-nvme { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VCC3_SSD"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&nvme_reg_en>; > > + > > + regulator-boot-on; > > + }; > > + > > + vreg_vph_pwr: regulator-vph-pwr { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VPH_VCC3R9"; > > + regulator-min-microvolt = <3900000>; > > + regulator-max-microvolt = <3900000>; > > + > > + regulator-always-on; > > + }; > > + > > + vreg_wlan: regulator-wlan { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VCC_WLAN_3R9"; > > + regulator-min-microvolt = <3900000>; > > + regulator-max-microvolt = <3900000>; > > + > > + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&hastings_reg_en>; > > + > > + regulator-boot-on; > > + }; > > + > > + vreg_wwan: regulator-wwan { > > + compatible = "regulator-fixed"; > > + > > + regulator-name = "VCC3B_WAN"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&wwan_sw_en>; > > + > > + regulator-boot-on; > > + }; > > + > > + reserved-memory { > > + gpu_mem: gpu-mem@8bf00000 { > > + reg = <0 0x8bf00000 0 0x2000>; > > + no-map; > > + }; > > + > > + linux,cma { > > + compatible = "shared-dma-pool"; > > + size = <0x0 0x8000000>; > > + reusable; > > + linux,cma-default; > > + }; > > + }; > > + > > + usb0-sbu-mux { > > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > > + > > + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; > > + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb0_sbu_default>; > > + > > + mode-switch; > > + orientation-switch; > > + > > + port { > > + usb0_sbu_mux: endpoint { > > + remote-endpoint = <&pmic_glink_con0_sbu>; > > + }; > > + }; > > + }; > > + > > + usb1-sbu-mux { > > + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; > > + > > + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; > > + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb1_sbu_default>; > > + > > + mode-switch; > > + orientation-switch; > > + > > + port { > > + usb1_sbu_mux: endpoint { > > + remote-endpoint = <&pmic_glink_con1_sbu>; > > + }; > > + }; > > + }; > > +}; > > + > > +&apps_rsc { > > + regulators-0 { > > + compatible = "qcom,pm8350-rpmh-regulators"; > > + qcom,pmic-id = "b"; > > + > > + vdd-s10-supply = <&vreg_vph_pwr>; > > + vdd-s11-supply = <&vreg_vph_pwr>; > > + vdd-s12-supply = <&vreg_vph_pwr>; > > + vdd-l1-l4-supply = <&vreg_s12b>; > > + vdd-l2-l7-supply = <&vreg_bob>; > > + vdd-l3-l5-supply = <&vreg_s11b>; > > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > > + vdd-l8-supply = <&vreg_s12b>; > > + > > + vreg_s10b: smps10 { > > + regulator-name = "vreg_s10b"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-always-on; > > + }; > > + > > + vreg_s11b: smps11 { > > + regulator-name = "vreg_s11b"; > > + regulator-min-microvolt = <1272000>; > > + regulator-max-microvolt = <1272000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-always-on; > > + }; > > + > > + vreg_s12b: smps12 { > > + regulator-name = "vreg_s12b"; > > + regulator-min-microvolt = <984000>; > > + regulator-max-microvolt = <984000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-always-on; > > + }; > > + > > + vreg_l1b: ldo1 { > > + regulator-name = "vreg_l1b"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3b: ldo3 { > > + regulator-name = "vreg_l3b"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-boot-on; > > + }; > > + > > + vreg_l4b: ldo4 { > > + regulator-name = "vreg_l4b"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l6b: ldo6 { > > + regulator-name = "vreg_l6b"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-boot-on; > > + }; > > + }; > > + > > + regulators-1 { > > + compatible = "qcom,pm8350c-rpmh-regulators"; > > + qcom,pmic-id = "c"; > > + > > + vdd-bob-supply = <&vreg_vph_pwr>; > > + vdd-l1-l12-supply = <&vreg_s1c>; > > + vdd-l2-l8-supply = <&vreg_s1c>; > > + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; > > + vdd-l6-l9-l11-supply = <&vreg_bob>; > > + vdd-l10-supply = <&vreg_s11b>; > > + > > + vreg_s1c: smps1 { > > + regulator-name = "vreg_s1c"; > > + regulator-min-microvolt = <1880000>; > > + regulator-max-microvolt = <1900000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-always-on; > > + }; > > + > > + vreg_l1c: ldo1 { > > + regulator-name = "vreg_l1c"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l6c: ldo6 { > > + regulator-name = "vreg_l6c"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <2960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l7c: ldo7 { > > + regulator-name = "vreg_l7c"; > > + regulator-min-microvolt = <2504000>; > > + regulator-max-microvolt = <2504000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-allow-set-load; > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > > + RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l8c: ldo8 { > > + regulator-name = "vreg_l8c"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l9c: ldo9 { > > + regulator-name = "vreg_l9c"; > > + regulator-min-microvolt = <2960000>; > > + regulator-max-microvolt = <2960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l12c: ldo12 { > > + regulator-name = "vreg_l12c"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l13c: ldo13 { > > + regulator-name = "vreg_l13c"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_bob: bob { > > + regulator-name = "vreg_bob"; > > + regulator-min-microvolt = <3008000>; > > + regulator-max-microvolt = <3960000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; > > + regulator-always-on; > > + }; > > + }; > > + > > + regulators-2 { > > + compatible = "qcom,pm8350-rpmh-regulators"; > > + qcom,pmic-id = "d"; > > + > > + vdd-l1-l4-supply = <&vreg_s11b>; > > + vdd-l2-l7-supply = <&vreg_bob>; > > + vdd-l3-l5-supply = <&vreg_s11b>; > > + vdd-l6-l9-l10-supply = <&vreg_s12b>; > > + vdd-l8-supply = <&vreg_s12b>; > > + > > + vreg_l2d: ldo2 { > > + regulator-name = "vreg_l2d"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l3d: ldo3 { > > + regulator-name = "vreg_l3d"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + regulator-allow-set-load; > > + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM > > + RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l4d: ldo4 { > > + regulator-name = "vreg_l4d"; > > + regulator-min-microvolt = <1200000>; > > + regulator-max-microvolt = <1200000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l6d: ldo6 { > > + regulator-name = "vreg_l6d"; > > + regulator-min-microvolt = <880000>; > > + regulator-max-microvolt = <880000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l7d: ldo7 { > > + regulator-name = "vreg_l7d"; > > + regulator-min-microvolt = <3072000>; > > + regulator-max-microvolt = <3072000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l8d: ldo8 { > > + regulator-name = "vreg_l8d"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l9d: ldo9 { > > + regulator-name = "vreg_l9d"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + > > + vreg_l10d: ldo10 { > > + regulator-name = "vreg_l10d"; > > + regulator-min-microvolt = <912000>; > > + regulator-max-microvolt = <912000>; > > + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; > > + }; > > + }; > > +}; > > + > > +&dispcc0 { > > + status = "okay"; > > +}; > > + > > +&gpu { > > + status = "okay"; > > + > > + zap-shader { > > + memory-region = <&gpu_mem>; > > + firmware-name = > > "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcdxkmsuc8280.mbn"; > > + }; > > +}; > > + > > +&mdss0 { > > + status = "okay"; > > +}; > > + > > +&mdss0_dp0 { > > + status = "okay"; > > +}; > > + > > +&mdss0_dp0_out { > > + data-lanes = <0 1>; > > + remote-endpoint = <&usb_0_qmpphy_dp_in>; > > +}; > > + > > +&mdss0_dp1 { > > + status = "okay"; > > +}; > > + > > +&mdss0_dp1_out { > > + data-lanes = <0 1>; > > + remote-endpoint = <&usb_1_qmpphy_dp_in>; > > +}; > > + > > +&mdss0_dp2 { > > + compatible = "qcom,sc8280xp-dp"; > > + > > + data-lanes = <0 1 2 3>; > > + > > + status = "okay"; > > + > > + ports { > > + port@1 { > > + reg = <1>; > > + mdss0_dp2_phy_out: endpoint { > > + remote-endpoint = <&dp1_connector_in>; > > + }; > > + }; > > + }; > > +}; > > + > > +&mdss0_dp2_phy { > > + compatible = "qcom,sc8280xp-dp-phy"; > > + > > + vdda-phy-supply = <&vreg_l3b>; > > + phy-supply = <&vreg_l3b>; > > + vdda-pll-supply = <&vreg_l6b>; > > + pll-supply = <&vreg_l6b>; > > + > > + status = "okay"; > > +}; > > + > > +&pcie2a { > > + aspm-no-l0s; > > + max-link-speed = <16>; > > + > > + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; > > + > > + vddpe-3v3-supply = <&vreg_nvme>; > > + pcie-vdda-supply = <&vreg_l7d>; > > + vdda-supply = <&vreg_l7d>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pcie2a_default>; > > + > > + status = "okay"; > > +}; > > + > > +&pcie2a_phy { > > + vdda-phy-supply = <&vreg_l4d>; > > + phy-supply = <&vreg_l4d>; > > + vdda-pll-supply = <&vreg_l6d>; > > + pll-supply = <&vreg_l6d>; > > + > > + status = "okay"; > > +}; > > + > > +&pcie4 { > > + max-link-speed = <2>; > > + aspm-no-l0s; > > + > > + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; > > + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; > > + > > + vddpe-3v3-supply = <&vreg_wlan>; > > + pcie-vdda-supply = <&vreg_l7d>; > > + vdda-supply = <&vreg_l7d>; > > + > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pcie4_default>; > > + > > + status = "okay"; > > +}; > > + > > +&pcie4_port0 { > > + wifi@0 { > > + compatible = "pci17cb,1103"; > > + reg = <0x10000 0x0 0x0 0x0 0x0>; > > + > > + qcom,ath11k-calibration-variant = "volterra"; > > + }; > > +}; > > + > > +&pcie4_phy { > > + vdda-phy-supply = <&vreg_l4d>; > > + phy-supply = <&vreg_l4d>; > > + vdda-pll-supply = <&vreg_l6d>; > > + pll-supply = <&vreg_l6d>; > > + > > + status = "okay"; > > +}; > > + > > +&pmc8280c_lpg { > > + status = "okay"; > > +}; > > + > > +&pmk8280_adc_tm { > > + status = "okay"; > > + > > + sys-therm@0 { > > + reg = <0>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@1 { > > + reg = <1>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@2 { > > + reg = <2>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@3 { > > + reg = <3>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@4 { > > + reg = <4>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@5 { > > + reg = <5>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@6 { > > + reg = <6>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > + > > + sys-therm@7 { > > + reg = <7>; > > + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > > + qcom,hw-settle-time-us = <200>; > > + qcom,avg-samples = <2>; > > + qcom,ratiometric; > > + }; > > +}; > > + > > +&pmk8280_pon_pwrkey { > > + status = "okay"; > > +}; > > + > > +&pmk8280_pon_resin { > > + status = "okay"; > > +}; > > + > > +&pmk8280_rtc { > > + nvmem-cells = <&rtc_offset>; > > + nvmem-cell-names = "offset"; > > + > > + status = "okay"; > > +}; > > + > > +&pmk8280_sdam_6 { > > + status = "okay"; > > + > > + rtc_offset: rtc-offset@bc { > > + reg = <0xbc 0x4>; > > + }; > > +}; > > + > > +&pmk8280_vadc { > > + status = "okay"; > > + > > + channel@144 { > > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm1"; > > + }; > > + > > + channel@145 { > > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm2"; > > + }; > > + > > + channel@146 { > > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm3"; > > + }; > > + > > + channel@147 { > > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm4"; > > + }; > > + > > + channel@344 { > > + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm5"; > > + }; > > + > > + channel@345 { > > + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm6"; > > + }; > > + > > + channel@346 { > > + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm7"; > > + }; > > + > > + channel@347 { > > + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; > > + qcom,hw-settle-time = <200>; > > + qcom,ratiometric; > > + label = "sys_therm8"; > > + }; > > +}; > > + > > +&qup0 { > > + status = "okay"; > > +}; > > + > > +&qup1 { > > + status = "okay"; > > +}; > > + > > +&qup2 { > > + status = "okay"; > > +}; > > + > > +&remoteproc_adsp { > > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcadsp8280.mbn"; > > + > > + status = "okay"; > > +}; > > + > > +&remoteproc_nsp0 { > > + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qccdsp8280.mbn"; > > + > > + status = "okay"; > > +}; > > + > > +&rxmacro { > > + status = "okay"; > > +}; > > + > > +&sound { > > + compatible = "qcom,sc8280xp-sndcard"; > > + model = "MICROSOFT/DEVKIT23/devkit23"; > > + audio-routing = > > + "SpkrLeft IN", "WSA_SPK1 OUT", > > + "SpkrRight IN", "WSA_SPK2 OUT", > > + "IN1_HPHL", "HPHL_OUT", > > + "IN2_HPHR", "HPHR_OUT", > > + "AMIC2", "MIC BIAS2", > > + "VA DMIC0", "MIC BIAS1", > > + "VA DMIC1", "MIC BIAS1", > > + "VA DMIC2", "MIC BIAS3", > > + "VA DMIC0", "VA MIC BIAS1", > > + "VA DMIC1", "VA MIC BIAS1", > > + "VA DMIC2", "VA MIC BIAS3", > > + "TX SWR_ADC1", "ADC2_OUTPUT"; > > + > > + wcd-playback-dai-link { > > + link-name = "WCD Playback"; > > + cpu { > > + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; > > + }; > > + > > + codec { > > + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; > > + }; > > + > > + platform { > > + sound-dai = <&q6apm>; > > + }; > > + }; > > + > > + wcd-capture-dai-link { > > + link-name = "WCD Capture"; > > + cpu { > > + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; > > + }; > > + > > + codec { > > + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; > > + }; > > + > > + platform { > > + sound-dai = <&q6apm>; > > + }; > > + }; > > + > > + wsa-dai-link { > > + link-name = "WSA Playback"; > > + cpu { > > + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; > > + }; > > + > > + codec { > > + sound-dai = <&swr0 0>, <&wsamacro 0>; > > + }; > > + > > + platform { > > + sound-dai = <&q6apm>; > > + }; > > + }; > > + > > + va-dai-link { > > + link-name = "VA Capture"; > > + cpu { > > + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; > > + }; > > + > > + platform { > > + sound-dai = <&q6apm>; > > + }; > > + > > + codec { > > + sound-dai = <&vamacro 0>; > > + }; > > + }; > > +}; > > + > > +&swr0 { > > + status = "okay"; > > +}; > > + > > +&swr1 { > > + status = "okay"; > > + > > + wcd_rx: wcd9380-rx@0,4 { > > + compatible = "sdw20217010d00"; > > + reg = <0 4>; > > + qcom,rx-port-mapping = <1 2 3 4 5>; > > + }; > > +}; > > + > > +&swr2 { > > + status = "okay"; > > + > > + wcd_tx: wcd9380-tx@0,3 { > > + compatible = "sdw20217010d00"; > > + reg = <0 3>; > > + qcom,tx-port-mapping = <1 1 2 3>; > > + }; > > +}; > > + > > +&txmacro { > > + status = "okay"; > > +}; > > + > > +&uart2 { > > + pinctrl-0 = <&uart2_default>; > > + pinctrl-names = "default"; > > + > > + status = "okay"; > > + > > + bluetooth { > > + compatible = "qcom,wcn6855-bt"; > > + > > + vddio-supply = <&vreg_s10b>; > > + vddbtcxmx-supply = <&vreg_s12b>; > > + vddrfacmn-supply = <&vreg_s12b>; > > + vddrfa0p8-supply = <&vreg_s12b>; > > + vddrfa1p2-supply = <&vreg_s11b>; > > + vddrfa1p7-supply = <&vreg_s1c>; > > + > > + max-speed = <3200000>; > > + > > + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; > > + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; > > + > > + pinctrl-0 = <&bt_default>; > > + pinctrl-names = "default"; > > + }; > > +}; > > + > > +&usb_0 { > > + status = "okay"; > > +}; > > + > > +&usb_0_dwc3 { > > + dr_mode = "host"; > > +}; > > + > > +&usb_0_dwc3_hs { > > + remote-endpoint = <&pmic_glink_con0_hs>; > > +}; > > + > > +&usb_0_hsphy { > > + vdda-pll-supply = <&vreg_l9d>; > > + vdda-phy-supply = <&vreg_l4d>; > > + phy-supply = <&vreg_l4d>; > > + vdda18-supply = <&vreg_l1c>; > > + vdda33-supply = <&vreg_l7d>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_0_qmpphy { > > + vdda-phy-supply = <&vreg_l4d>; > > + phy-supply = <&vreg_l4d>; > > + vdda-pll-supply = <&vreg_l9d>; > > + pll-supply = <&vreg_l9d>; > > + > > + orientation-switch; > > + > > + status = "okay"; > > +}; > > + > > +&usb_0_qmpphy_dp_in { > > + remote-endpoint = <&mdss0_dp0_out>; > > +}; > > + > > +&usb_0_qmpphy_out { > > + remote-endpoint = <&pmic_glink_con0_ss>; > > +}; > > + > > +&usb_1 { > > + status = "okay"; > > +}; > > + > > +&usb_1_dwc3 { > > + dr_mode = "host"; > > +}; > > + > > +&usb_1_dwc3_hs { > > + remote-endpoint = <&pmic_glink_con1_hs>; > > +}; > > + > > +&usb_1_hsphy { > > + vdda-pll-supply = <&vreg_l4b>; > > + vdda-phy-supply = <&vreg_l3b>; > > + phy-supply = <&vreg_l3b>; > > + vdda18-supply = <&vreg_l1c>; > > + vdda33-supply = <&vreg_l13c>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_qmpphy { > > + vdda-phy-supply = <&vreg_l3b>; > > + phy-supply = <&vreg_l3b>; > > + vdda-pll-supply = <&vreg_l4b>; > > + pll-supply = <&vreg_l4b>; > > + > > + orientation-switch; > > + > > + status = "okay"; > > +}; > > + > > +&usb_1_qmpphy_dp_in { > > + remote-endpoint = <&mdss0_dp1_out>; > > +}; > > + > > +&usb_1_qmpphy_out { > > + remote-endpoint = <&pmic_glink_con1_ss>; > > +}; > > + > > +&usb_2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&usb2_en_state>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_dwc3 { > > + dr_mode = "host"; > > + phy-names = "usb2-port0", "usb3-port0"; > > + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_hsphy0 { > > + vdda-pll-supply = <&vreg_l1b>; > > + vdda-phy-supply = <&vreg_l3d>; > > + phy-supply = <&vreg_l3d>; > > + vdda18-supply = <&vreg_l1c>; > > + vdda33-supply = <&vreg_l7d>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_hsphy1 { > > + vdda-pll-supply = <&vreg_l8d>; > > + vdda-phy-supply = <&vreg_l3d>; > > + phy-supply = <&vreg_l3d>; > > + vdda18-supply = <&vreg_l1c>; > > + vdda33-supply = <&vreg_l7d>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_hsphy2 { > > + vdda-pll-supply = <&vreg_l10d>; > > + vdda-phy-supply = <&vreg_l3d>; > > + phy-supply = <&vreg_l3d>; > > + vdda18-supply = <&vreg_l8c>; > > + vdda33-supply = <&vreg_l2d>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_hsphy3 { > > + vdda-pll-supply = <&vreg_l10d>; > > + vdda-phy-supply = <&vreg_l3d>; > > + phy-supply = <&vreg_l3d>; > > + vdda18-supply = <&vreg_l8c>; > > + vdda33-supply = <&vreg_l2d>; > > + > > + status = "okay"; > > +}; > > + > > +&usb_2_qmpphy0 { > > + vdda-phy-supply = <&vreg_l1b>; > > + phy-supply = <&vreg_l1b>; > > + vdda-pll-supply = <&vreg_l4d>; > > + pll-supply = <&vreg_l4d>; > > + status = "okay"; > > +}; > > + > > +&usb_2_qmpphy1 { > > + vdda-phy-supply = <&vreg_l8d>; > > + phy-supply = <&vreg_l8d>; > > + vdda-pll-supply = <&vreg_l4d>; > > + pll-supply = <&vreg_l4d>; > > + status = "okay"; > > +}; > > + > > +&vamacro { > > + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; > > + pinctrl-names = "default"; > > + > > + vdd-micb-supply = <&vreg_s10b>; > > + > > + qcom,dmic-sample-rate = <4800000>; > > + > > + status = "okay"; > > +}; > > + > > +&wsamacro { > > + status = "okay"; > > +}; > > + > > +&xo_board_clk { > > + clock-frequency = <38400000>; > > +}; > > + > > +/* PINCTRL */ > > + > > +&lpass_tlmm { > > + status = "okay"; > > +}; > > + > > +&pmc8280_1_gpios { > > + edp_bl_en: edp-bl-en-state { > > + pins = "gpio8"; > > + function = "normal"; > > + }; > > + > > + edp_bl_reg_en: edp-bl-reg-en-state { > > + pins = "gpio9"; > > + function = "normal"; > > + }; > > + > > + misc_3p3_reg_en: misc-3p3-reg-en-state { > > + pins = "gpio1"; > > + function = "normal"; > > + }; > > +}; > > + > > +&pmc8280_2_gpios { > > + wwan_sw_en: wwan-sw-en-state { > > + pins = "gpio1"; > > + function = "normal"; > > + }; > > +}; > > + > > +&pmc8280c_gpios { > > + edp_bl_pwm: edp-bl-pwm-state { > > + pins = "gpio8"; > > + function = "func1"; > > + }; > > +}; > > + > > +&pmr735a_gpios { > > + hastings_reg_en: hastings-reg-en-state { > > + pins = "gpio1"; > > + function = "normal"; > > + }; > > +}; > > + > > +&tlmm { > > + gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; > > + > > + bt_default: bt-default-state { > > + hstp-bt-en-pins { > > + pins = "gpio133"; > > + function = "gpio"; > > + drive-strength = <16>; > > + bias-disable; > > + }; > > + > > + hstp-sw-ctrl-pins { > > + pins = "gpio132"; > > + function = "gpio"; > > + bias-pull-down; > > + }; > > + }; > > + > > + nvme_reg_en: nvme-reg-en-state { > > + pins = "gpio135"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + pcie2a_default: pcie2a-default-state { > > + clkreq-n-pins { > > + pins = "gpio142"; > > + function = "pcie2a_clkreq"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + > > + perst-n-pins { > > + pins = "gpio143"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + wake-n-pins { > > + pins = "gpio145"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + }; > > + > > + pcie3a_default: pcie3a-default-state { > > + clkreq-n-pins { > > + pins = "gpio150"; > > + function = "pcie3a_clkreq"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + > > + perst-n-pins { > > + pins = "gpio151"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + wake-n-pins { > > + pins = "gpio148"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + }; > > + > > + pcie4_default: pcie4-default-state { > > + clkreq-n-pins { > > + pins = "gpio140"; > > + function = "pcie4_clkreq"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + > > + perst-n-pins { > > + pins = "gpio141"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + wake-n-pins { > > + pins = "gpio139"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-pull-up; > > + }; > > + }; > > + > > + uart2_default: uart2-default-state { > > + cts-pins { > > + pins = "gpio121"; > > + function = "qup2"; > > + bias-bus-hold; > > + }; > > + > > + rts-pins { > > + pins = "gpio122"; > > + function = "qup2"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + > > + rx-pins { > > + pins = "gpio124"; > > + function = "qup2"; > > + bias-pull-up; > > + }; > > + > > + tx-pins { > > + pins = "gpio123"; > > + function = "qup2"; > > + drive-strength = <2>; > > + bias-disable; > > + }; > > + }; > > + > > + usb0_sbu_default: usb0-sbu-state { > > + oe-n-pins { > > + pins = "gpio101"; > > + function = "gpio"; > > + bias-disable; > > + drive-strength = <16>; > > + output-high; > > + }; > > + > > + sel-pins { > > + pins = "gpio164"; > > + function = "gpio"; > > + bias-disable; > > + drive-strength = <16>; > > + }; > > + }; > > + > > + usb1_sbu_default: usb1-sbu-state { > > + oe-n-pins { > > + pins = "gpio48"; > > + function = "gpio"; > > + bias-disable; > > + drive-strength = <16>; > > + output-high; > > + }; > > + > > + sel-pins { > > + pins = "gpio47"; > > + function = "gpio"; > > + bias-disable; > > + drive-strength = <16>; > > + }; > > + }; > > + > > + usb2_en_state: usb2-en-state { > > + /* TS3USB221A USB2.0 mux select */ > > + pins = "gpio24"; > > + function = "gpio"; > > + drive-strength = <2>; > > + bias-disable; > > + output-low; > > + }; > > + > > + wcd_default: wcd-default-state { > > + reset-pins { > > + pins = "gpio106"; > > + function = "gpio"; > > + bias-disable; > > + }; > > + }; > > +}; > > -- > > 2.43.0 > >
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 197ab325c0b9e..d71d87abdb3fb 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -191,6 +191,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc8180x-lenovo-flex-5g.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8180x-primus.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-crd.dtb dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-lenovo-thinkpad-x13s.dtb +dtb-$(CONFIG_ARCH_QCOM) += sc8280xp-microsoft-blackrock.dtb dtb-$(CONFIG_ARCH_QCOM) += sda660-inforce-ifc6560.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm450-lenovo-tbx605f.dtb dtb-$(CONFIG_ARCH_QCOM) += sdm450-motorola-ali.dtb diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts new file mode 100644 index 0000000000000..af28897f0de3d --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts @@ -0,0 +1,1334 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/gpio-keys.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/regulator/qcom,rpmh-regulator.h> + +#include "sc8280xp.dtsi" +#include "sc8280xp-pmics.dtsi" + +/ { + model = "Windows Dev Kit 2023"; + compatible = "microsoft,win-dev-kit-2023", "qcom,sc8280xp"; + + aliases { + i2c4 = &i2c4; + i2c21 = &i2c21; + serial1 = &uart2; + }; + + wcd938x: audio-codec { + compatible = "qcom,wcd9380-codec"; + + pinctrl-names = "default"; + pinctrl-0 = <&wcd_default>; + + reset-gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + + vdd-buck-supply = <&vreg_s10b>; + vdd-rxtx-supply = <&vreg_s10b>; + vdd-io-supply = <&vreg_s10b>; + vdd-mic-bias-supply = <&vreg_bob>; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + #sound-dai-cells = <1>; + }; + + firmware { + qseecom { + compatible = "qcom,qseecom-sc8280xp", "qcom,qseecom"; + qcom,scm = <&scm>; + }; + }; + + pmic-glink { + compatible = "qcom,sc8280xp-pmic-glink", "qcom,pmic-glink"; + + #address-cells = <1>; + #size-cells = <0>; + orientation-gpios = <&tlmm 166 GPIO_ACTIVE_HIGH>, + <&tlmm 49 GPIO_ACTIVE_HIGH>; + + connector@0 { + compatible = "usb-c-connector"; + reg = <0>; + power-role = "source"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + pmic_glink_con0_hs: endpoint { + remote-endpoint = <&usb_0_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con0_ss: endpoint { + remote-endpoint = <&usb_0_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con0_sbu: endpoint { + remote-endpoint = <&usb0_sbu_mux>; + }; + }; + }; + }; + + connector@1 { + compatible = "usb-c-connector"; + reg = <1>; + power-role = "source"; + data-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + pmic_glink_con1_hs: endpoint { + remote-endpoint = <&usb_1_dwc3_hs>; + }; + }; + + port@1 { + reg = <1>; + + pmic_glink_con1_ss: endpoint { + remote-endpoint = <&usb_1_qmpphy_out>; + }; + }; + + port@2 { + reg = <2>; + + pmic_glink_con1_sbu: endpoint { + remote-endpoint = <&usb1_sbu_mux>; + }; + }; + }; + }; + }; + + dp1-connector@0 { + compatible = "dp-connector"; + label = "DP1"; + type = "mini"; + + dp-pwr-supply = <&vreg_misc_3p3>; + + //hpd-gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>; + + port { + dp1_connector_in: endpoint { + remote-endpoint = <&mdss0_dp2_phy_out>; + }; + }; + }; + + vreg_misc_3p3: regulator-misc-3p3 { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_1_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&misc_3p3_reg_en>; + + regulator-boot-on; + regulator-always-on; + }; + + vreg_nvme: regulator-nvme { + compatible = "regulator-fixed"; + + regulator-name = "VCC3_SSD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 135 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&nvme_reg_en>; + + regulator-boot-on; + }; + + vreg_vph_pwr: regulator-vph-pwr { + compatible = "regulator-fixed"; + + regulator-name = "VPH_VCC3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + regulator-always-on; + }; + + vreg_wlan: regulator-wlan { + compatible = "regulator-fixed"; + + regulator-name = "VCC_WLAN_3R9"; + regulator-min-microvolt = <3900000>; + regulator-max-microvolt = <3900000>; + + gpio = <&pmr735a_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&hastings_reg_en>; + + regulator-boot-on; + }; + + vreg_wwan: regulator-wwan { + compatible = "regulator-fixed"; + + regulator-name = "VCC3B_WAN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&pmc8280_2_gpios 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-names = "default"; + pinctrl-0 = <&wwan_sw_en>; + + regulator-boot-on; + }; + + reserved-memory { + gpu_mem: gpu-mem@8bf00000 { + reg = <0 0x8bf00000 0 0x2000>; + no-map; + }; + + linux,cma { + compatible = "shared-dma-pool"; + size = <0x0 0x8000000>; + reusable; + linux,cma-default; + }; + }; + + usb0-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 164 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb0_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usb0_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con0_sbu>; + }; + }; + }; + + usb1-sbu-mux { + compatible = "pericom,pi3usb102", "gpio-sbu-mux"; + + enable-gpios = <&tlmm 48 GPIO_ACTIVE_LOW>; + select-gpios = <&tlmm 47 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&usb1_sbu_default>; + + mode-switch; + orientation-switch; + + port { + usb1_sbu_mux: endpoint { + remote-endpoint = <&pmic_glink_con1_sbu>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "b"; + + vdd-s10-supply = <&vreg_vph_pwr>; + vdd-s11-supply = <&vreg_vph_pwr>; + vdd-s12-supply = <&vreg_vph_pwr>; + vdd-l1-l4-supply = <&vreg_s12b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; + + vreg_s10b: smps10 { + regulator-name = "vreg_s10b"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_s11b: smps11 { + regulator-name = "vreg_s11b"; + regulator-min-microvolt = <1272000>; + regulator-max-microvolt = <1272000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_s12b: smps12 { + regulator-name = "vreg_s12b"; + regulator-min-microvolt = <984000>; + regulator-max-microvolt = <984000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l1b: ldo1 { + regulator-name = "vreg_l1b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3b: ldo3 { + regulator-name = "vreg_l3b"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + }; + + vreg_l4b: ldo4 { + regulator-name = "vreg_l4b"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6b: ldo6 { + regulator-name = "vreg_l6b"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-boot-on; + }; + }; + + regulators-1 { + compatible = "qcom,pm8350c-rpmh-regulators"; + qcom,pmic-id = "c"; + + vdd-bob-supply = <&vreg_vph_pwr>; + vdd-l1-l12-supply = <&vreg_s1c>; + vdd-l2-l8-supply = <&vreg_s1c>; + vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>; + vdd-l6-l9-l11-supply = <&vreg_bob>; + vdd-l10-supply = <&vreg_s11b>; + + vreg_s1c: smps1 { + regulator-name = "vreg_s1c"; + regulator-min-microvolt = <1880000>; + regulator-max-microvolt = <1900000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-always-on; + }; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <2960000>; + regulator-max-microvolt = <2960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l12c: ldo12 { + regulator-name = "vreg_l12c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l13c: ldo13 { + regulator-name = "vreg_l13c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_bob: bob { + regulator-name = "vreg_bob"; + regulator-min-microvolt = <3008000>; + regulator-max-microvolt = <3960000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>; + regulator-always-on; + }; + }; + + regulators-2 { + compatible = "qcom,pm8350-rpmh-regulators"; + qcom,pmic-id = "d"; + + vdd-l1-l4-supply = <&vreg_s11b>; + vdd-l2-l7-supply = <&vreg_bob>; + vdd-l3-l5-supply = <&vreg_s11b>; + vdd-l6-l9-l10-supply = <&vreg_s12b>; + vdd-l8-supply = <&vreg_s12b>; + + vreg_l2d: ldo2 { + regulator-name = "vreg_l2d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l3d: ldo3 { + regulator-name = "vreg_l3d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + regulator-allow-set-load; + regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM + RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l4d: ldo4 { + regulator-name = "vreg_l4d"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l6d: ldo6 { + regulator-name = "vreg_l6d"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l7d: ldo7 { + regulator-name = "vreg_l7d"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l8d: ldo8 { + regulator-name = "vreg_l8d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l9d: ldo9 { + regulator-name = "vreg_l9d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + + vreg_l10d: ldo10 { + regulator-name = "vreg_l10d"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; + }; + }; +}; + +&dispcc0 { + status = "okay"; +}; + +&gpu { + status = "okay"; + + zap-shader { + memory-region = <&gpu_mem>; + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcdxkmsuc8280.mbn"; + }; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp0 { + status = "okay"; +}; + +&mdss0_dp0_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_0_qmpphy_dp_in>; +}; + +&mdss0_dp1 { + status = "okay"; +}; + +&mdss0_dp1_out { + data-lanes = <0 1>; + remote-endpoint = <&usb_1_qmpphy_dp_in>; +}; + +&mdss0_dp2 { + compatible = "qcom,sc8280xp-dp"; + + data-lanes = <0 1 2 3>; + + status = "okay"; + + ports { + port@1 { + reg = <1>; + mdss0_dp2_phy_out: endpoint { + remote-endpoint = <&dp1_connector_in>; + }; + }; + }; +}; + +&mdss0_dp2_phy { + compatible = "qcom,sc8280xp-dp-phy"; + + vdda-phy-supply = <&vreg_l3b>; + phy-supply = <&vreg_l3b>; + vdda-pll-supply = <&vreg_l6b>; + pll-supply = <&vreg_l6b>; + + status = "okay"; +}; + +&pcie2a { + aspm-no-l0s; + max-link-speed = <16>; + + perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_nvme>; + pcie-vdda-supply = <&vreg_l7d>; + vdda-supply = <&vreg_l7d>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie2a_default>; + + status = "okay"; +}; + +&pcie2a_phy { + vdda-phy-supply = <&vreg_l4d>; + phy-supply = <&vreg_l4d>; + vdda-pll-supply = <&vreg_l6d>; + pll-supply = <&vreg_l6d>; + + status = "okay"; +}; + +&pcie4 { + max-link-speed = <2>; + aspm-no-l0s; + + perst-gpios = <&tlmm 141 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 139 GPIO_ACTIVE_LOW>; + + vddpe-3v3-supply = <&vreg_wlan>; + pcie-vdda-supply = <&vreg_l7d>; + vdda-supply = <&vreg_l7d>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie4_default>; + + status = "okay"; +}; + +&pcie4_port0 { + wifi@0 { + compatible = "pci17cb,1103"; + reg = <0x10000 0x0 0x0 0x0 0x0>; + + qcom,ath11k-calibration-variant = "volterra"; + }; +}; + +&pcie4_phy { + vdda-phy-supply = <&vreg_l4d>; + phy-supply = <&vreg_l4d>; + vdda-pll-supply = <&vreg_l6d>; + pll-supply = <&vreg_l6d>; + + status = "okay"; +}; + +&pmc8280c_lpg { + status = "okay"; +}; + +&pmk8280_adc_tm { + status = "okay"; + + sys-therm@0 { + reg = <0>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@1 { + reg = <1>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@2 { + reg = <2>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@3 { + reg = <3>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@4 { + reg = <4>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@5 { + reg = <5>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@6 { + reg = <6>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; + + sys-therm@7 { + reg = <7>; + io-channels = <&pmk8280_vadc PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time-us = <200>; + qcom,avg-samples = <2>; + qcom,ratiometric; + }; +}; + +&pmk8280_pon_pwrkey { + status = "okay"; +}; + +&pmk8280_pon_resin { + status = "okay"; +}; + +&pmk8280_rtc { + nvmem-cells = <&rtc_offset>; + nvmem-cell-names = "offset"; + + status = "okay"; +}; + +&pmk8280_sdam_6 { + status = "okay"; + + rtc_offset: rtc-offset@bc { + reg = <0xbc 0x4>; + }; +}; + +&pmk8280_vadc { + status = "okay"; + + channel@144 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm1"; + }; + + channel@145 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm2"; + }; + + channel@146 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm3"; + }; + + channel@147 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm4"; + }; + + channel@344 { + reg = <PM8350_ADC7_AMUX_THM1_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm5"; + }; + + channel@345 { + reg = <PM8350_ADC7_AMUX_THM2_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm6"; + }; + + channel@346 { + reg = <PM8350_ADC7_AMUX_THM3_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm7"; + }; + + channel@347 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(3)>; + qcom,hw-settle-time = <200>; + qcom,ratiometric; + label = "sys_therm8"; + }; +}; + +&qup0 { + status = "okay"; +}; + +&qup1 { + status = "okay"; +}; + +&qup2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qcadsp8280.mbn"; + + status = "okay"; +}; + +&remoteproc_nsp0 { + firmware-name = "qcom/sc8280xp/MICROSOFT/DEVKIT23/qccdsp8280.mbn"; + + status = "okay"; +}; + +&rxmacro { + status = "okay"; +}; + +&sound { + compatible = "qcom,sc8280xp-sndcard"; + model = "MICROSOFT/DEVKIT23/devkit23"; + audio-routing = + "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC2", "MIC BIAS2", + "VA DMIC0", "MIC BIAS1", + "VA DMIC1", "MIC BIAS1", + "VA DMIC2", "MIC BIAS3", + "VA DMIC0", "VA MIC BIAS1", + "VA DMIC1", "VA MIC BIAS1", + "VA DMIC2", "VA MIC BIAS3", + "TX SWR_ADC1", "ADC2_OUTPUT"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-capture-dai-link { + link-name = "WCD Capture"; + cpu { + sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>; + }; + + codec { + sound-dai = <&wcd938x 1>, <&swr2 0>, <&txmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + + codec { + sound-dai = <&vamacro 0>; + }; + }; +}; + +&swr0 { + status = "okay"; +}; + +&swr1 { + status = "okay"; + + wcd_rx: wcd9380-rx@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: wcd9380-tx@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + +&txmacro { + status = "okay"; +}; + +&uart2 { + pinctrl-0 = <&uart2_default>; + pinctrl-names = "default"; + + status = "okay"; + + bluetooth { + compatible = "qcom,wcn6855-bt"; + + vddio-supply = <&vreg_s10b>; + vddbtcxmx-supply = <&vreg_s12b>; + vddrfacmn-supply = <&vreg_s12b>; + vddrfa0p8-supply = <&vreg_s12b>; + vddrfa1p2-supply = <&vreg_s11b>; + vddrfa1p7-supply = <&vreg_s1c>; + + max-speed = <3200000>; + + enable-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>; + swctrl-gpios = <&tlmm 132 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&bt_default>; + pinctrl-names = "default"; + }; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + dr_mode = "host"; +}; + +&usb_0_dwc3_hs { + remote-endpoint = <&pmic_glink_con0_hs>; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l9d>; + vdda-phy-supply = <&vreg_l4d>; + phy-supply = <&vreg_l4d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l4d>; + phy-supply = <&vreg_l4d>; + vdda-pll-supply = <&vreg_l9d>; + pll-supply = <&vreg_l9d>; + + orientation-switch; + + status = "okay"; +}; + +&usb_0_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp0_out>; +}; + +&usb_0_qmpphy_out { + remote-endpoint = <&pmic_glink_con0_ss>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + dr_mode = "host"; +}; + +&usb_1_dwc3_hs { + remote-endpoint = <&pmic_glink_con1_hs>; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l4b>; + vdda-phy-supply = <&vreg_l3b>; + phy-supply = <&vreg_l3b>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l13c>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l3b>; + phy-supply = <&vreg_l3b>; + vdda-pll-supply = <&vreg_l4b>; + pll-supply = <&vreg_l4b>; + + orientation-switch; + + status = "okay"; +}; + +&usb_1_qmpphy_dp_in { + remote-endpoint = <&mdss0_dp1_out>; +}; + +&usb_1_qmpphy_out { + remote-endpoint = <&pmic_glink_con1_ss>; +}; + +&usb_2 { + pinctrl-names = "default"; + pinctrl-0 = <&usb2_en_state>; + + status = "okay"; +}; + +&usb_2_dwc3 { + dr_mode = "host"; + phy-names = "usb2-port0", "usb3-port0"; + phys = <&usb_2_hsphy0>, <&usb_2_qmpphy0>; + + status = "okay"; +}; + +&usb_2_hsphy0 { + vdda-pll-supply = <&vreg_l1b>; + vdda-phy-supply = <&vreg_l3d>; + phy-supply = <&vreg_l3d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy1 { + vdda-pll-supply = <&vreg_l8d>; + vdda-phy-supply = <&vreg_l3d>; + phy-supply = <&vreg_l3d>; + vdda18-supply = <&vreg_l1c>; + vdda33-supply = <&vreg_l7d>; + + status = "okay"; +}; + +&usb_2_hsphy2 { + vdda-pll-supply = <&vreg_l10d>; + vdda-phy-supply = <&vreg_l3d>; + phy-supply = <&vreg_l3d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_hsphy3 { + vdda-pll-supply = <&vreg_l10d>; + vdda-phy-supply = <&vreg_l3d>; + phy-supply = <&vreg_l3d>; + vdda18-supply = <&vreg_l8c>; + vdda33-supply = <&vreg_l2d>; + + status = "okay"; +}; + +&usb_2_qmpphy0 { + vdda-phy-supply = <&vreg_l1b>; + phy-supply = <&vreg_l1b>; + vdda-pll-supply = <&vreg_l4d>; + pll-supply = <&vreg_l4d>; + status = "okay"; +}; + +&usb_2_qmpphy1 { + vdda-phy-supply = <&vreg_l8d>; + phy-supply = <&vreg_l8d>; + vdda-pll-supply = <&vreg_l4d>; + pll-supply = <&vreg_l4d>; + status = "okay"; +}; + +&vamacro { + pinctrl-0 = <&dmic01_default>, <&dmic23_default>; + pinctrl-names = "default"; + + vdd-micb-supply = <&vreg_s10b>; + + qcom,dmic-sample-rate = <4800000>; + + status = "okay"; +}; + +&wsamacro { + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ + +&lpass_tlmm { + status = "okay"; +}; + +&pmc8280_1_gpios { + edp_bl_en: edp-bl-en-state { + pins = "gpio8"; + function = "normal"; + }; + + edp_bl_reg_en: edp-bl-reg-en-state { + pins = "gpio9"; + function = "normal"; + }; + + misc_3p3_reg_en: misc-3p3-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280_2_gpios { + wwan_sw_en: wwan-sw-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&pmc8280c_gpios { + edp_bl_pwm: edp-bl-pwm-state { + pins = "gpio8"; + function = "func1"; + }; +}; + +&pmr735a_gpios { + hastings_reg_en: hastings-reg-en-state { + pins = "gpio1"; + function = "normal"; + }; +}; + +&tlmm { + gpio-reserved-ranges = <70 2>, <74 6>, <125 2>, <128 2>, <154 4>; + + bt_default: bt-default-state { + hstp-bt-en-pins { + pins = "gpio133"; + function = "gpio"; + drive-strength = <16>; + bias-disable; + }; + + hstp-sw-ctrl-pins { + pins = "gpio132"; + function = "gpio"; + bias-pull-down; + }; + }; + + nvme_reg_en: nvme-reg-en-state { + pins = "gpio135"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + pcie2a_default: pcie2a-default-state { + clkreq-n-pins { + pins = "gpio142"; + function = "pcie2a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio143"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio145"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie3a_default: pcie3a-default-state { + clkreq-n-pins { + pins = "gpio150"; + function = "pcie3a_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio151"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio148"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie4_default: pcie4-default-state { + clkreq-n-pins { + pins = "gpio140"; + function = "pcie4_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + perst-n-pins { + pins = "gpio141"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + wake-n-pins { + pins = "gpio139"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + uart2_default: uart2-default-state { + cts-pins { + pins = "gpio121"; + function = "qup2"; + bias-bus-hold; + }; + + rts-pins { + pins = "gpio122"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + + rx-pins { + pins = "gpio124"; + function = "qup2"; + bias-pull-up; + }; + + tx-pins { + pins = "gpio123"; + function = "qup2"; + drive-strength = <2>; + bias-disable; + }; + }; + + usb0_sbu_default: usb0-sbu-state { + oe-n-pins { + pins = "gpio101"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio164"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + usb1_sbu_default: usb1-sbu-state { + oe-n-pins { + pins = "gpio48"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + output-high; + }; + + sel-pins { + pins = "gpio47"; + function = "gpio"; + bias-disable; + drive-strength = <16>; + }; + }; + + usb2_en_state: usb2-en-state { + /* TS3USB221A USB2.0 mux select */ + pins = "gpio24"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-low; + }; + + wcd_default: wcd-default-state { + reset-pins { + pins = "gpio106"; + function = "gpio"; + bias-disable; + }; + }; +};