| Message ID | 20240829201315.3412759-1-festevam@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/2] spi: dt-bindings: spi-peripheral-props: Document spi-cpha and spi-cpol | expand |
On Thu, Aug 29, 2024 at 05:13:14PM -0300, Fabio Estevam wrote: > The 'spi-cpha' and 'spi-cpol' are commonly used SPI peripheral > properties that indicate the device clock phase and polarity. > > Document these properties. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > --- > .../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > index 0bb443b8decd..b2e2717f3619 100644 > --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > @@ -29,6 +29,16 @@ properties: > description: > Chip select used by the device. > > + spi-cpha: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The device data is sampled on trailing (last) edge of the SPI clock. > + > + spi-cpol: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The device clock has a falling lead (first) edge. These two should just be usable with "spi-cpha: true", they're applied by the controller schema to it's child nodes, so you don't need to redefine their type here. > + > spi-cs-high: > $ref: /schemas/types.yaml#/definitions/flag > description: > -- > 2.34.1 >
On 29/08/2024 22:13, Fabio Estevam wrote: > The 'spi-cpha' and 'spi-cpol' are commonly used SPI peripheral > properties that indicate the device clock phase and polarity. > > Document these properties. > > Signed-off-by: Fabio Estevam <festevam@gmail.com> > --- > .../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > index 0bb443b8decd..b2e2717f3619 100644 > --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml > @@ -29,6 +29,16 @@ properties: > description: > Chip select used by the device. > > + spi-cpha: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The device data is sampled on trailing (last) edge of the SPI clock. > + > + spi-cpol: > + $ref: /schemas/types.yaml#/definitions/flag > + description: > + The device clock has a falling lead (first) edge. That would be a revert of earlier commit without explanation why such revert is needed. :( Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml index 0bb443b8decd..b2e2717f3619 100644 --- a/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml +++ b/Documentation/devicetree/bindings/spi/spi-peripheral-props.yaml @@ -29,6 +29,16 @@ properties: description: Chip select used by the device. + spi-cpha: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device data is sampled on trailing (last) edge of the SPI clock. + + spi-cpol: + $ref: /schemas/types.yaml#/definitions/flag + description: + The device clock has a falling lead (first) edge. + spi-cs-high: $ref: /schemas/types.yaml#/definitions/flag description:
The 'spi-cpha' and 'spi-cpol' are commonly used SPI peripheral properties that indicate the device clock phase and polarity. Document these properties. Signed-off-by: Fabio Estevam <festevam@gmail.com> --- .../devicetree/bindings/spi/spi-peripheral-props.yaml | 10 ++++++++++ 1 file changed, 10 insertions(+)