| Message ID | 20240828171722.1251587-2-swboyd@chromium.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | clk: qcom: gcc-sm8550: Fix shared clk parking breakage | expand |
On Wed, Aug 28, 2024 at 10:17:07AM -0700, Stephen Boyd wrote: > Amit Pundir reports that audio and USB-C host mode stops working on > sm8550 after commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon > registration"). That's because the gcc_usb30_prim_master_clk_src clk is > registered and clk_rcg2_shared_init() parks it on XO. Running USB at a > slower speed than the link supports is effectively under-clocking the > USB link and probably confusing the downstream USB devices. > > We didn't need to change all the shared RCGs to park on XO at > registration time in commit commit 01a0a6cc8cfd ("clk: qcom: Park shared > RCGs upon registration"). Instead, we only needed to park the few > display related clks on sc7180 to fix the issue. > > Fix sm8550 (and likely other qcom SoCs) by skipping the parking part of > clk_rcg2_shared_init(). Make that the default init clk_op for shared > RCGs, but keep the part where we cache the config register as that's > still necessary to figure out the true parent of the clk is. Introduce > another set of clk_ops 'clk_rcg2_shared_init_park' that does what > clk_rcg2_shared_init() was doing and use that for the display clks on > sc7180. This fixes the sm8550 problem and limits the "park upon > registration" logic to the display clks that need it. > > Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") > Cc: Konrad Dybcio <konradybcio@kernel.org> > Cc: Bjorn Andersson <andersson@kernel.org> > Cc: Taniya Das <quic_tdas@quicinc.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Reported-by: Amit Pundir <amit.pundir@linaro.org> > Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com > Signed-off-by: Stephen Boyd <swboyd@chromium.org> I can confirm that this fixes the earlycon issue on x1e80100 that Bryan reported here: https://lore.kernel.org/lkml/20240823-x1e80100-clk-fix-v1-1-0b1b4f5a96e8@linaro.org/ Perhaps you can drop the "dispcc-sc7180:" prefix from Subject when applying (or resending) since this fixes a regression on multiple Qualcomm SoCs. For example, use something like: clk: qcom: Only park sc7180 display clks at init Tested-by: Johan Hovold <johan+linaro@kernel.org> Johan
Hi, On 28/08/2024 19:17, Stephen Boyd wrote: > Amit Pundir reports that audio and USB-C host mode stops working on > sm8550 after commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon > registration"). That's because the gcc_usb30_prim_master_clk_src clk is > registered and clk_rcg2_shared_init() parks it on XO. Running USB at a > slower speed than the link supports is effectively under-clocking the > USB link and probably confusing the downstream USB devices. > > We didn't need to change all the shared RCGs to park on XO at > registration time in commit commit 01a0a6cc8cfd ("clk: qcom: Park shared > RCGs upon registration"). Instead, we only needed to park the few > display related clks on sc7180 to fix the issue. > > Fix sm8550 (and likely other qcom SoCs) by skipping the parking part of > clk_rcg2_shared_init(). Make that the default init clk_op for shared > RCGs, but keep the part where we cache the config register as that's > still necessary to figure out the true parent of the clk is. Introduce > another set of clk_ops 'clk_rcg2_shared_init_park' that does what > clk_rcg2_shared_init() was doing and use that for the display clks on > sc7180. This fixes the sm8550 problem and limits the "park upon > registration" logic to the display clks that need it. > > Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") > Cc: Konrad Dybcio <konradybcio@kernel.org> > Cc: Bjorn Andersson <andersson@kernel.org> > Cc: Taniya Das <quic_tdas@quicinc.com> > Cc: Neil Armstrong <neil.armstrong@linaro.org> > Reported-by: Amit Pundir <amit.pundir@linaro.org> > Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com > Signed-off-by: Stephen Boyd <swboyd@chromium.org> > --- > drivers/clk/qcom/clk-rcg.h | 1 + > drivers/clk/qcom/clk-rcg2.c | 36 +++++++++++++++++++++++++++++--- > drivers/clk/qcom/dispcc-sc7180.c | 8 +++---- > 3 files changed, 38 insertions(+), 7 deletions(-) > <snip> I've been testing this serie on SM8650, and with 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") it fixes an issue we have that triggers: [ 18.740736] ------------[ cut here ]------------ [ 18.745837] ufs_phy_gdsc status stuck at 'off' [ 18.745929] WARNING: CPU: 1 PID: 197 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x15c/0x164 ... after waking up UFS from runtime suspend. So I suspect we'll need to figure out which SM8650 GCC shared clocks would need to use clk_rcg2_shared_init_park_ops ? We also had random boot crash when initializing the display very late on multiple platforms, and so far "clk: qcom: Park shared RCGs upon registration" fixed that, but I also suppose Ill need to reflect the changes done to dispcc-sc7180.c to dispcc-sm8650.c and others. Neil
Quoting Neil Armstrong (2024-08-29 08:32:48) > > > I've been testing this serie on SM8650, and with 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") > it fixes an issue we have that triggers: > [ 18.740736] ------------[ cut here ]------------ > [ 18.745837] ufs_phy_gdsc status stuck at 'off' > [ 18.745929] WARNING: CPU: 1 PID: 197 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x15c/0x164 > ... > after waking up UFS from runtime suspend. Oof that's not good. > > So I suspect we'll need to figure out which SM8650 GCC shared clocks would need > to use clk_rcg2_shared_init_park_ops ? > > We also had random boot crash when initializing the display very late on multiple platforms, > and so far "clk: qcom: Park shared RCGs upon registration" fixed that, but I also suppose Ill > need to reflect the changes done to dispcc-sc7180.c to dispcc-sm8650.c and others. It sounds like it's better to make the default always park at registration time and special case the one or two places where that isn't possible, i.e. USB because it has special rate requirements. So I should just go back to v1 then and pile on the QUP patches. In the long run we probably need to put the clk rate and enable control into the pm_domains for the gdscs that require them and implement the "parking" and "unparking" there instead of in the clk_ops layer. That way we know that when the gdsc is turned on it will have a clk that works, and when it is turned off it is always parked. We can also use the gdsc on/off state at init time to increment the enable count on the shared PLLs by using clk_hw_get_clk() and clk consumer APIs. This will let us move the boot state into the kernel in a way that doesn't break when a child clk sharing a PLL is turned off.
Quoting Stephen Boyd (2024-08-29 09:34:05) > Quoting Neil Armstrong (2024-08-29 08:32:48) > > > > > > I've been testing this serie on SM8650, and with 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") > > it fixes an issue we have that triggers: > > [ 18.740736] ------------[ cut here ]------------ > > [ 18.745837] ufs_phy_gdsc status stuck at 'off' > > [ 18.745929] WARNING: CPU: 1 PID: 197 at drivers/clk/qcom/gdsc.c:178 gdsc_toggle_logic+0x15c/0x164 > > ... > > after waking up UFS from runtime suspend. > > Oof that's not good. > > > > > So I suspect we'll need to figure out which SM8650 GCC shared clocks would need > > to use clk_rcg2_shared_init_park_ops ? > > > > We also had random boot crash when initializing the display very late on multiple platforms, > > and so far "clk: qcom: Park shared RCGs upon registration" fixed that, but I also suppose Ill > > need to reflect the changes done to dispcc-sc7180.c to dispcc-sm8650.c and others. > > It sounds like it's better to make the default always park at > registration time and special case the one or two places where that > isn't possible, i.e. USB because it has special rate requirements. So I > should just go back to v1 then and pile on the QUP patches. I've done this now and I'll push out clk-fixes with the QUP patches.
On Fri, Aug 30, 2024 at 03:29:22PM -0700, Stephen Boyd wrote: > Quoting Stephen Boyd (2024-08-29 09:34:05) > > It sounds like it's better to make the default always park at > > registration time and special case the one or two places where that > > isn't possible, i.e. USB because it has special rate requirements. So I > > should just go back to v1 then and pile on the QUP patches. > > I've done this now and I'll push out clk-fixes with the QUP patches. I assumed you'd fix up all the other SoCs affected by this, but I only saw fixes for sm8550, sm8650 and x1e80100 in your fixes branch. Just sent a corresponding fix for sc8280xp, which I've confirmed also needs this for QUP: https://lore.kernel.org/lkml/20240902070830.8535-1-johan+linaro@kernel.org/ But what about the sm8550 USB issue? Don't the other platforms also need a corresponding fix (e.g. for when booting from USB)? Johan
Quoting Johan Hovold (2024-09-02 00:15:53) > On Fri, Aug 30, 2024 at 03:29:22PM -0700, Stephen Boyd wrote: > > Quoting Stephen Boyd (2024-08-29 09:34:05) > > > > It sounds like it's better to make the default always park at > > > registration time and special case the one or two places where that > > > isn't possible, i.e. USB because it has special rate requirements. So I > > > should just go back to v1 then and pile on the QUP patches. > > > > I've done this now and I'll push out clk-fixes with the QUP patches. > > I assumed you'd fix up all the other SoCs affected by this, but I only > saw fixes for sm8550, sm8650 and x1e80100 in your fixes branch. > > Just sent a corresponding fix for sc8280xp, which I've confirmed also > needs this for QUP: Thanks! > > https://lore.kernel.org/lkml/20240902070830.8535-1-johan+linaro@kernel.org/ > > But what about the sm8550 USB issue? Don't the other platforms also need > a corresponding fix (e.g. for when booting from USB)? I don't know. Are you seeing USB host issues on other platforms with shared RCG clk_ops for the USB clk? It looks inconsistent that sometimes there's a USB GDSC but the shared clk ops aren't used. If nothing is broken then let's work on the proper fix, which is parking RCGs when the GDSC is turned off so that turning on the GDSC always works. If USB is broken for you then send another patch.
On Tue, Sep 03, 2024 at 12:55:07PM -0700, Stephen Boyd wrote: > Quoting Johan Hovold (2024-09-02 00:15:53) > > On Fri, Aug 30, 2024 at 03:29:22PM -0700, Stephen Boyd wrote: > > > Quoting Stephen Boyd (2024-08-29 09:34:05) > > > > > > It sounds like it's better to make the default always park at > > > > registration time and special case the one or two places where that > > > > isn't possible, i.e. USB because it has special rate requirements. So I > > > > should just go back to v1 then and pile on the QUP patches. > > > > > > I've done this now and I'll push out clk-fixes with the QUP patches. > > > > I assumed you'd fix up all the other SoCs affected by this, but I only > > saw fixes for sm8550, sm8650 and x1e80100 in your fixes branch. > > > > Just sent a corresponding fix for sc8280xp, which I've confirmed also > > needs this for QUP: > > Thanks! > > > https://lore.kernel.org/lkml/20240902070830.8535-1-johan+linaro@kernel.org/ > > > > But what about the sm8550 USB issue? Don't the other platforms also need > > a corresponding fix (e.g. for when booting from USB)? > > I don't know. Are you seeing USB host issues on other platforms with > shared RCG clk_ops for the USB clk? It looks inconsistent that sometimes > there's a USB GDSC but the shared clk ops aren't used. If nothing is > broken then let's work on the proper fix, which is parking RCGs when the > GDSC is turned off so that turning on the GDSC always works. If USB is > broken for you then send another patch. I haven't noticed any USB issues on the two platforms I work on and which both have USB GDSCs (sc8280xp and x1e80100), but then again I don't test USB booting regularly (if that's when the issue show up). I was hoping you would have a theory as to why things broke on sm8550 so that you can reason about which platforms need this, rather than have multiple users debug these issues and play whack-a-mole with incomplete fixes. I don't see anything SoC specific about the QUP fixes and assume early console handover is now broken on all Qualcomm SoCs for example. Johan
diff --git a/drivers/clk/qcom/clk-rcg.h b/drivers/clk/qcom/clk-rcg.h index d7414361e432..5f479a29d969 100644 --- a/drivers/clk/qcom/clk-rcg.h +++ b/drivers/clk/qcom/clk-rcg.h @@ -198,6 +198,7 @@ extern const struct clk_ops clk_byte2_ops; extern const struct clk_ops clk_pixel_ops; extern const struct clk_ops clk_gfx3d_ops; extern const struct clk_ops clk_rcg2_shared_ops; +extern const struct clk_ops clk_rcg2_shared_init_park_ops; extern const struct clk_ops clk_dp_ops; struct clk_rcg_dfs_data { diff --git a/drivers/clk/qcom/clk-rcg2.c b/drivers/clk/qcom/clk-rcg2.c index 30b19bd39d08..5f0b729d7115 100644 --- a/drivers/clk/qcom/clk-rcg2.c +++ b/drivers/clk/qcom/clk-rcg2.c @@ -1305,6 +1305,31 @@ clk_rcg2_shared_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) } static int clk_rcg2_shared_init(struct clk_hw *hw) +{ + struct clk_rcg2 *rcg = to_clk_rcg2(hw); + + /* + * Cache the cfg so that the parent is properly mapped at registration. + */ + regmap_read(rcg->clkr.regmap, rcg->cmd_rcgr + CFG_REG, &rcg->parked_cfg); + + return 0; +} + +const struct clk_ops clk_rcg2_shared_ops = { + .init = clk_rcg2_shared_init, + .enable = clk_rcg2_shared_enable, + .disable = clk_rcg2_shared_disable, + .get_parent = clk_rcg2_shared_get_parent, + .set_parent = clk_rcg2_shared_set_parent, + .recalc_rate = clk_rcg2_shared_recalc_rate, + .determine_rate = clk_rcg2_determine_rate, + .set_rate = clk_rcg2_shared_set_rate, + .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent, +}; +EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops); + +static int clk_rcg2_shared_init_park(struct clk_hw *hw) { /* * This does a few things: @@ -1335,8 +1360,13 @@ static int clk_rcg2_shared_init(struct clk_hw *hw) return 0; } -const struct clk_ops clk_rcg2_shared_ops = { - .init = clk_rcg2_shared_init, +/* + * Like clk_rcg2_shared_ops but also park the clk at init to avoid the parent + * from being shutdown, getting the clk stuck when it is turned on + * automatically by the GDSC. + */ +const struct clk_ops clk_rcg2_shared_init_park_ops = { + .init = clk_rcg2_shared_init_park, .enable = clk_rcg2_shared_enable, .disable = clk_rcg2_shared_disable, .get_parent = clk_rcg2_shared_get_parent, @@ -1346,7 +1376,7 @@ const struct clk_ops clk_rcg2_shared_ops = { .set_rate = clk_rcg2_shared_set_rate, .set_rate_and_parent = clk_rcg2_shared_set_rate_and_parent, }; -EXPORT_SYMBOL_GPL(clk_rcg2_shared_ops); +EXPORT_SYMBOL_GPL(clk_rcg2_shared_init_park_ops); /* Common APIs to be used for DFS based RCGR */ static void clk_rcg2_dfs_populate_freq(struct clk_hw *hw, unsigned int l, diff --git a/drivers/clk/qcom/dispcc-sc7180.c b/drivers/clk/qcom/dispcc-sc7180.c index 4710247be530..068af819f23e 100644 --- a/drivers/clk/qcom/dispcc-sc7180.c +++ b/drivers/clk/qcom/dispcc-sc7180.c @@ -154,7 +154,7 @@ static struct clk_rcg2 disp_cc_mdss_ahb_clk_src = { .parent_data = disp_cc_parent_data_4, .num_parents = ARRAY_SIZE(disp_cc_parent_data_4), .flags = CLK_SET_RATE_PARENT, - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_init_park_ops, }, }; @@ -263,7 +263,7 @@ static struct clk_rcg2 disp_cc_mdss_mdp_clk_src = { .name = "disp_cc_mdss_mdp_clk_src", .parent_data = disp_cc_parent_data_3, .num_parents = ARRAY_SIZE(disp_cc_parent_data_3), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_init_park_ops, }, }; @@ -291,7 +291,7 @@ static struct clk_rcg2 disp_cc_mdss_rot_clk_src = { .name = "disp_cc_mdss_rot_clk_src", .parent_data = disp_cc_parent_data_3, .num_parents = ARRAY_SIZE(disp_cc_parent_data_3), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_init_park_ops, }, }; @@ -305,7 +305,7 @@ static struct clk_rcg2 disp_cc_mdss_vsync_clk_src = { .name = "disp_cc_mdss_vsync_clk_src", .parent_data = disp_cc_parent_data_0, .num_parents = ARRAY_SIZE(disp_cc_parent_data_0), - .ops = &clk_rcg2_shared_ops, + .ops = &clk_rcg2_shared_init_park_ops, }, };
Amit Pundir reports that audio and USB-C host mode stops working on sm8550 after commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration"). That's because the gcc_usb30_prim_master_clk_src clk is registered and clk_rcg2_shared_init() parks it on XO. Running USB at a slower speed than the link supports is effectively under-clocking the USB link and probably confusing the downstream USB devices. We didn't need to change all the shared RCGs to park on XO at registration time in commit commit 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration"). Instead, we only needed to park the few display related clks on sc7180 to fix the issue. Fix sm8550 (and likely other qcom SoCs) by skipping the parking part of clk_rcg2_shared_init(). Make that the default init clk_op for shared RCGs, but keep the part where we cache the config register as that's still necessary to figure out the true parent of the clk is. Introduce another set of clk_ops 'clk_rcg2_shared_init_park' that does what clk_rcg2_shared_init() was doing and use that for the display clks on sc7180. This fixes the sm8550 problem and limits the "park upon registration" logic to the display clks that need it. Fixes: 01a0a6cc8cfd ("clk: qcom: Park shared RCGs upon registration") Cc: Konrad Dybcio <konradybcio@kernel.org> Cc: Bjorn Andersson <andersson@kernel.org> Cc: Taniya Das <quic_tdas@quicinc.com> Cc: Neil Armstrong <neil.armstrong@linaro.org> Reported-by: Amit Pundir <amit.pundir@linaro.org> Closes: https://lore.kernel.org/CAMi1Hd1KQBE4kKUdAn8E5FV+BiKzuv+8FoyWQrrTHPDoYTuhgA@mail.gmail.com Signed-off-by: Stephen Boyd <swboyd@chromium.org> --- drivers/clk/qcom/clk-rcg.h | 1 + drivers/clk/qcom/clk-rcg2.c | 36 +++++++++++++++++++++++++++++--- drivers/clk/qcom/dispcc-sc7180.c | 8 +++---- 3 files changed, 38 insertions(+), 7 deletions(-)