diff mbox series

[V5,1/5] phy: freescale: fsl-samsung-hdmi: Replace register defines with macro

Message ID 20240904023310.163371-2-aford173@gmail.com
State Superseded
Headers show
Series phy: freescale: fsl-samsung-hdmi: Expand phy clock options | expand

Commit Message

Adam Ford Sept. 4, 2024, 2:32 a.m. UTC 
There are 47 registers defined as PHY_REG_xx were xx goes from 00 to
47.  Simplify this by replacing them all with a macro which is passed
the register number to return the proper register offset.

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
---
V5:  Restore comment about REG33.
     Add spacing between the REG entries to easier readability
---
 drivers/phy/freescale/phy-fsl-samsung-hdmi.c | 133 ++++++-------------
 1 file changed, 43 insertions(+), 90 deletions(-)

Comments

Frieder Schrempf Sept. 4, 2024, 9:21 a.m. UTC | #1 
On 04.09.24 4:32 AM, Adam Ford wrote:
> There are 47 registers defined as PHY_REG_xx were xx goes from 00 to
> 47.  Simplify this by replacing them all with a macro which is passed
> the register number to return the proper register offset.
> 
> Signed-off-by: Adam Ford <aford173@gmail.com>
> Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>

Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
diff mbox series

Patch

diff --git a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
index 9048cdc760c2..acea7008aefc 100644
--- a/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
+++ b/drivers/phy/freescale/phy-fsl-samsung-hdmi.c
@@ -14,76 +14,29 @@ 
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 
-#define PHY_REG_00		0x00
-#define PHY_REG_01		0x04
-#define PHY_REG_02		0x08
-#define PHY_REG_08		0x20
-#define PHY_REG_09		0x24
-#define PHY_REG_10		0x28
-#define PHY_REG_11		0x2c
-
-#define PHY_REG_12		0x30
-#define  REG12_CK_DIV_MASK	GENMASK(5, 4)
-
-#define PHY_REG_13		0x34
-#define  REG13_TG_CODE_LOW_MASK	GENMASK(7, 0)
-
-#define PHY_REG_14		0x38
-#define  REG14_TOL_MASK		GENMASK(7, 4)
-#define  REG14_RP_CODE_MASK	GENMASK(3, 1)
-#define  REG14_TG_CODE_HIGH_MASK	GENMASK(0, 0)
-
-#define PHY_REG_15		0x3c
-#define PHY_REG_16		0x40
-#define PHY_REG_17		0x44
-#define PHY_REG_18		0x48
-#define PHY_REG_19		0x4c
-#define PHY_REG_20		0x50
-
-#define PHY_REG_21		0x54
-#define  REG21_SEL_TX_CK_INV	BIT(7)
-#define  REG21_PMS_S_MASK	GENMASK(3, 0)
-
-#define PHY_REG_22		0x58
-#define PHY_REG_23		0x5c
-#define PHY_REG_24		0x60
-#define PHY_REG_25		0x64
-#define PHY_REG_26		0x68
-#define PHY_REG_27		0x6c
-#define PHY_REG_28		0x70
-#define PHY_REG_29		0x74
-#define PHY_REG_30		0x78
-#define PHY_REG_31		0x7c
-#define PHY_REG_32		0x80
+#define PHY_REG(reg)		(reg * 4)
 
+#define REG12_CK_DIV_MASK	GENMASK(5, 4)
+
+#define REG13_TG_CODE_LOW_MASK	GENMASK(7, 0)
+
+#define REG14_TOL_MASK		GENMASK(7, 4)
+#define REG14_RP_CODE_MASK	GENMASK(3, 1)
+#define REG14_TG_CODE_HIGH_MASK	GENMASK(0, 0)
+
+#define REG21_SEL_TX_CK_INV	BIT(7)
+#define REG21_PMS_S_MASK	GENMASK(3, 0)
 /*
  * REG33 does not match the ref manual. According to Sandor Yu from NXP,
  * "There is a doc issue on the i.MX8MP latest RM"
  * REG33 is being used per guidance from Sandor
  */
+#define REG33_MODE_SET_DONE	BIT(7)
+#define REG33_FIX_DA		BIT(1)
 
-#define PHY_REG_33		0x84
-#define  REG33_MODE_SET_DONE	BIT(7)
-#define  REG33_FIX_DA		BIT(1)
-
-#define PHY_REG_34		0x88
-#define  REG34_PHY_READY	BIT(7)
-#define  REG34_PLL_LOCK		BIT(6)
-#define  REG34_PHY_CLK_READY	BIT(5)
-
-#define PHY_REG_35		0x8c
-#define PHY_REG_36		0x90
-#define PHY_REG_37		0x94
-#define PHY_REG_38		0x98
-#define PHY_REG_39		0x9c
-#define PHY_REG_40		0xa0
-#define PHY_REG_41		0xa4
-#define PHY_REG_42		0xa8
-#define PHY_REG_43		0xac
-#define PHY_REG_44		0xb0
-#define PHY_REG_45		0xb4
-#define PHY_REG_46		0xb8
-#define PHY_REG_47		0xbc
+#define REG34_PHY_READY	BIT(7)
+#define REG34_PLL_LOCK		BIT(6)
+#define REG34_PHY_CLK_READY	BIT(5)
 
 #define PHY_PLL_DIV_REGS_NUM 6
 
@@ -369,29 +322,29 @@  struct reg_settings {
 };
 
 static const struct reg_settings common_phy_cfg[] = {
-	{ PHY_REG_00, 0x00 }, { PHY_REG_01, 0xd1 },
-	{ PHY_REG_08, 0x4f }, { PHY_REG_09, 0x30 },
-	{ PHY_REG_10, 0x33 }, { PHY_REG_11, 0x65 },
+	{ PHY_REG(0), 0x00 }, { PHY_REG(1), 0xd1 },
+	{ PHY_REG(8), 0x4f }, { PHY_REG(9), 0x30 },
+	{ PHY_REG(10), 0x33 }, { PHY_REG(11), 0x65 },
 	/* REG12 pixclk specific */
 	/* REG13 pixclk specific */
 	/* REG14 pixclk specific */
-	{ PHY_REG_15, 0x80 }, { PHY_REG_16, 0x6c },
-	{ PHY_REG_17, 0xf2 }, { PHY_REG_18, 0x67 },
-	{ PHY_REG_19, 0x00 }, { PHY_REG_20, 0x10 },
+	{ PHY_REG(15), 0x80 }, { PHY_REG(16), 0x6c },
+	{ PHY_REG(17), 0xf2 }, { PHY_REG(18), 0x67 },
+	{ PHY_REG(19), 0x00 }, { PHY_REG(20), 0x10 },
 	/* REG21 pixclk specific */
-	{ PHY_REG_22, 0x30 }, { PHY_REG_23, 0x32 },
-	{ PHY_REG_24, 0x60 }, { PHY_REG_25, 0x8f },
-	{ PHY_REG_26, 0x00 }, { PHY_REG_27, 0x00 },
-	{ PHY_REG_28, 0x08 }, { PHY_REG_29, 0x00 },
-	{ PHY_REG_30, 0x00 }, { PHY_REG_31, 0x00 },
-	{ PHY_REG_32, 0x00 }, { PHY_REG_33, 0x80 },
-	{ PHY_REG_34, 0x00 }, { PHY_REG_35, 0x00 },
-	{ PHY_REG_36, 0x00 }, { PHY_REG_37, 0x00 },
-	{ PHY_REG_38, 0x00 }, { PHY_REG_39, 0x00 },
-	{ PHY_REG_40, 0x00 }, { PHY_REG_41, 0xe0 },
-	{ PHY_REG_42, 0x83 }, { PHY_REG_43, 0x0f },
-	{ PHY_REG_44, 0x3E }, { PHY_REG_45, 0xf8 },
-	{ PHY_REG_46, 0x00 }, { PHY_REG_47, 0x00 }
+	{ PHY_REG(22), 0x30 }, { PHY_REG(23), 0x32 },
+	{ PHY_REG(24), 0x60 }, { PHY_REG(25), 0x8f },
+	{ PHY_REG(26), 0x00 }, { PHY_REG(27), 0x00 },
+	{ PHY_REG(28), 0x08 }, { PHY_REG(29), 0x00 },
+	{ PHY_REG(30), 0x00 }, { PHY_REG(31), 0x00 },
+	{ PHY_REG(32), 0x00 }, { PHY_REG(33), 0x80 },
+	{ PHY_REG(34), 0x00 }, { PHY_REG(35), 0x00 },
+	{ PHY_REG(36), 0x00 }, { PHY_REG(37), 0x00 },
+	{ PHY_REG(38), 0x00 }, { PHY_REG(39), 0x00 },
+	{ PHY_REG(40), 0x00 }, { PHY_REG(41), 0xe0 },
+	{ PHY_REG(42), 0x83 }, { PHY_REG(43), 0x0f },
+	{ PHY_REG(44), 0x3E }, { PHY_REG(45), 0xf8 },
+	{ PHY_REG(46), 0x00 }, { PHY_REG(47), 0x00 }
 };
 
 struct fsl_samsung_hdmi_phy {
@@ -442,7 +395,7 @@  fsl_samsung_hdmi_phy_configure_pixclk(struct fsl_samsung_hdmi_phy *phy,
 	}
 
 	writeb(REG21_SEL_TX_CK_INV | FIELD_PREP(REG21_PMS_S_MASK, div),
-	       phy->regs + PHY_REG_21);
+	       phy->regs + PHY_REG(21));
 }
 
 static void
@@ -469,7 +422,7 @@  fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
 		break;
 	}
 
-	writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG_12);
+	writeb(FIELD_PREP(REG12_CK_DIV_MASK, ilog2(div)), phy->regs + PHY_REG(12));
 
 	/*
 	 * Calculation for the frequency lock detector target code (fld_tg_code)
@@ -489,11 +442,11 @@  fsl_samsung_hdmi_phy_configure_pll_lock_det(struct fsl_samsung_hdmi_phy *phy,
 
 	/* FLD_TOL and FLD_RP_CODE taken from downstream driver */
 	writeb(FIELD_PREP(REG13_TG_CODE_LOW_MASK, fld_tg_code),
-	       phy->regs + PHY_REG_13);
+	       phy->regs + PHY_REG(13));
 	writeb(FIELD_PREP(REG14_TOL_MASK, 2) |
 	       FIELD_PREP(REG14_RP_CODE_MASK, 2) |
 	       FIELD_PREP(REG14_TG_CODE_HIGH_MASK, fld_tg_code >> 8),
-	       phy->regs + PHY_REG_14);
+	       phy->regs + PHY_REG(14));
 }
 
 static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
@@ -503,7 +456,7 @@  static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
 	u8 val;
 
 	/* HDMI PHY init */
-	writeb(REG33_FIX_DA, phy->regs + PHY_REG_33);
+	writeb(REG33_FIX_DA, phy->regs + PHY_REG(33));
 
 	/* common PHY registers */
 	for (i = 0; i < ARRAY_SIZE(common_phy_cfg); i++)
@@ -511,14 +464,14 @@  static int fsl_samsung_hdmi_phy_configure(struct fsl_samsung_hdmi_phy *phy,
 
 	/* set individual PLL registers PHY_REG2 ... PHY_REG7 */
 	for (i = 0; i < PHY_PLL_DIV_REGS_NUM; i++)
-		writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG_02 + i * 4);
+		writeb(cfg->pll_div_regs[i], phy->regs + PHY_REG(2) + i * 4);
 
 	fsl_samsung_hdmi_phy_configure_pixclk(phy, cfg);
 	fsl_samsung_hdmi_phy_configure_pll_lock_det(phy, cfg);
 
-	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG_33);
+	writeb(REG33_FIX_DA | REG33_MODE_SET_DONE, phy->regs + PHY_REG(33));
 
-	ret = readb_poll_timeout(phy->regs + PHY_REG_34, val,
+	ret = readb_poll_timeout(phy->regs + PHY_REG(34), val,
 				 val & REG34_PLL_LOCK, 50, 20000);
 	if (ret)
 		dev_err(phy->dev, "PLL failed to lock\n");