diff mbox series

[07/10] arm64: dts: qcom: sc7280: Add support for camss

Message ID 20240904-camss_on_sc7280_rb3gen2_vision_v2_patches-v1-7-b18ddcd7d9df@quicinc.com (mailing list archive)
State New
Headers show
Series (no cover subject) | expand

Commit Message

Vikram Sharma Sept. 4, 2024, 11:10 a.m. UTC 
Add changes to support the camera subsystem on the SC7280.

Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280.dtsi | 175 +++++++++++++++++++++++++++++++++++
 1 file changed, 175 insertions(+)

Comments

Krzysztof Kozlowski Sept. 4, 2024, 11:31 a.m. UTC | #1 
On 04/09/2024 13:10, Vikram Sharma wrote:
> Add changes to support the camera subsystem on the SC7280.
> 
> Signed-off-by: Suresh Vankadara <quic_svankada@quicinc.com>
> Signed-off-by: Trishansh Bhardwaj <quic_tbhardwa@quicinc.com>
> Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/sc7280.dtsi | 175 +++++++++++++++++++++++++++++++++++
>  1 file changed, 175 insertions(+)
> 

This does not follow DTS coding style.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 3d8410683402..109aafe967f8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4419,6 +4419,181 @@  cci1_i2c1: i2c-bus@1 {
 			};
 		};
 
+		camss: camss@acaf000 {
+			compatible = "qcom,sc7280-camss";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				<&camcc CAM_CC_CPAS_AHB_CLK>,
+				<&camcc CAM_CC_IFE_0_CSID_CLK>,
+				<&camcc CAM_CC_IFE_1_CSID_CLK>,
+				<&camcc CAM_CC_IFE_2_CSID_CLK>,
+				<&camcc CAM_CC_IFE_LITE_0_CSID_CLK>,
+				<&camcc CAM_CC_IFE_LITE_1_CSID_CLK>,
+				<&camcc CAM_CC_CSIPHY0_CLK>,
+				<&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				<&camcc CAM_CC_CSIPHY1_CLK>,
+				<&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				<&camcc CAM_CC_CSIPHY2_CLK>,
+				<&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				<&camcc CAM_CC_CSIPHY3_CLK>,
+				<&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				<&camcc CAM_CC_CSIPHY4_CLK>,
+				<&camcc CAM_CC_CSI4PHYTIMER_CLK>,
+				<&gcc GCC_CAMERA_AHB_CLK>,
+				<&gcc GCC_CAMERA_HF_AXI_CLK>,
+				<&camcc CAM_CC_CPAS_AHB_CLK>,
+				<&camcc CAM_CC_IFE_0_AXI_CLK>,
+				<&camcc CAM_CC_IFE_0_CLK>,
+				<&camcc CAM_CC_IFE_0_CPHY_RX_CLK>,
+				<&camcc CAM_CC_IFE_1_AXI_CLK>,
+				<&camcc CAM_CC_IFE_1_CLK>,
+				<&camcc CAM_CC_IFE_1_CPHY_RX_CLK>,
+				<&camcc CAM_CC_IFE_2_AXI_CLK>,
+				<&camcc CAM_CC_IFE_2_CLK>,
+				<&camcc CAM_CC_IFE_2_CPHY_RX_CLK>,
+				<&camcc CAM_CC_IFE_LITE_0_CLK>,
+				<&camcc CAM_CC_IFE_LITE_0_CPHY_RX_CLK>,
+				<&camcc CAM_CC_IFE_LITE_1_CLK>,
+				<&camcc CAM_CC_IFE_LITE_1_CPHY_RX_CLK>;
+
+			clock-names = "camnoc_axi",
+				"cpas_ahb",
+				"csi0",
+				"csi1",
+				"csi2",
+				"csi3",
+				"csi4",
+				"csiphy0",
+				"csiphy0_timer",
+				"csiphy1",
+				"csiphy1_timer",
+				"csiphy2",
+				"csiphy2_timer",
+				"csiphy3",
+				"csiphy3_timer",
+				"csiphy4",
+				"csiphy4_timer",
+				"gcc_camera_ahb",
+				"gcc_camera_axi",
+				"soc_ahb",
+				"vfe0_axi",
+				"vfe0",
+				"vfe0_cphy_rx",
+				"vfe1_axi",
+				"vfe1",
+				"vfe1_cphy_rx",
+				"vfe2_axi",
+				"vfe2",
+				"vfe2_cphy_rx",
+				"vfe0_lite",
+				"vfe0_lite_cphy_rx",
+				"vfe1_lite",
+				"vfe1_lite_cphy_rx";
+
+			interconnect-names = "ahb", "hf_0";
+			interconnects = <&gem_noc  MASTER_APPSS_PROC 0 &cnoc2 SLAVE_CAMERA_CFG 0>,
+				<&mmss_noc MASTER_CAMNOC_HF  0 &mc_virt SLAVE_EBI1     0>;
+
+			interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 640 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 641 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				<GIC_SPI 360 IRQ_TYPE_EDGE_RISING>;
+
+			interrupt-names = "csid0",
+				"csid1",
+				"csid2",
+				"csid_lite0",
+				"csid_lite1",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"csiphy4",
+				"vfe0",
+				"vfe1",
+				"vfe2",
+				"vfe_lite0",
+				"vfe_lite1";
+
+			iommus = <&apps_smmu 0x800 0x4e0>;
+
+			power-domains = <&camcc CAM_CC_IFE_0_GDSC>,
+				<&camcc CAM_CC_IFE_1_GDSC>,
+				<&camcc CAM_CC_IFE_2_GDSC>,
+				<&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domains-names = "ife0", "ife1", "ife2", "top";
+
+			reg = <0x0 0x0acb3000 0x0 0x1000>,
+				<0x0 0x0acba000 0x0 0x1000>,
+				<0x0 0x0acc1000 0x0 0x1000>,
+				<0x0 0x0acc8000 0x0 0x1000>,
+				<0x0 0x0accf000 0x0 0x1000>,
+				<0x0 0x0ace0000 0x0 0x2000>,
+				<0x0 0x0ace2000 0x0 0x2000>,
+				<0x0 0x0ace4000 0x0 0x2000>,
+				<0x0 0x0ace6000 0x0 0x2000>,
+				<0x0 0x0ace8000 0x0 0x2000>,
+				<0x0 0x0acaf000 0x0 0x4000>,
+				<0x0 0x0acb6000 0x0 0x4000>,
+				<0x0 0x0acbd000 0x0 0x4000>,
+				<0x0 0x0acc4000 0x0 0x4000>,
+				<0x0 0x0accb000 0x0 0x4000>;
+
+			reg-names = "csid0",
+				"csid1",
+				"csid2",
+				"csid_lite0",
+				"csid_lite1",
+				"csiphy0",
+				"csiphy1",
+				"csiphy2",
+				"csiphy3",
+				"csiphy4",
+				"vfe0",
+				"vfe1",
+				"vfe2",
+				"vfe_lite0",
+				"vfe_lite1";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+
+				port@4 {
+					reg = <4>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc7280-camcc";
 			reg = <0 0x0ad00000 0 0x10000>;