| Message ID | 20240903220240.2594102-15-quic_nkela@quicinc.com (mailing list archive) |
|---|---|
| State | Handled Elsewhere, archived |
| Headers | show |
| Series | [v2,01/21] dt-bindings: arm: qcom: add the SoC ID for SA8255P | expand |
On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote: > Add compatible for the cpufreq engine representing support on SA8255p. > > Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> > --- > .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml > index 1e9797f96410..84865e553c8b 100644 > --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml > @@ -34,6 +34,7 @@ properties: > items: > - enum: > - qcom,qdu1000-cpufreq-epss > + - qcom,sa8255p-cpufreq-epss > - qcom,sa8775p-cpufreq-epss > - qcom,sc7280-cpufreq-epss > - qcom,sc8280xp-cpufreq-epss > @@ -206,6 +207,21 @@ allOf: > interrupt-names: > minItems: 2 > > + - if: > + properties: > + compatible: > + contains: > + enum: > + - qcom,sa8255p-cpufreq-epss > + then: > + properties: > + reg: > + minItems: 2 > + maxItems: 2 > + > + reg-names: > + minItems: 2 > + maxItems: 2 What about interrupts? You need to constrain each of such lists. Best regards, Krzysztof
On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote: > On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote: >> Add compatible for the cpufreq engine representing support on SA8255p. >> >> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >> --- >> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ >> 1 file changed, 16 insertions(+) >> >> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >> index 1e9797f96410..84865e553c8b 100644 >> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >> @@ -34,6 +34,7 @@ properties: >> items: >> - enum: >> - qcom,qdu1000-cpufreq-epss >> + - qcom,sa8255p-cpufreq-epss >> - qcom,sa8775p-cpufreq-epss >> - qcom,sc7280-cpufreq-epss >> - qcom,sc8280xp-cpufreq-epss >> @@ -206,6 +207,21 @@ allOf: >> interrupt-names: >> minItems: 2 >> >> + - if: >> + properties: >> + compatible: >> + contains: >> + enum: >> + - qcom,sa8255p-cpufreq-epss >> + then: >> + properties: >> + reg: >> + minItems: 2 >> + maxItems: 2 >> + >> + reg-names: >> + minItems: 2 >> + maxItems: 2 > What about interrupts? You need to constrain each of such lists. > > Best regards, > Krzysztof Interrupts are not required, I still need to put constraints for interrupts? BTW, there is no if block for SA8775p binding in this file. Thanks, -Nikunj
On 04/09/2024 14:27, Nikunj Kela wrote: > > On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote: >> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote: >>> Add compatible for the cpufreq engine representing support on SA8255p. >>> >>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >>> --- >>> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ >>> 1 file changed, 16 insertions(+) >>> >>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>> index 1e9797f96410..84865e553c8b 100644 >>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>> @@ -34,6 +34,7 @@ properties: >>> items: >>> - enum: >>> - qcom,qdu1000-cpufreq-epss >>> + - qcom,sa8255p-cpufreq-epss >>> - qcom,sa8775p-cpufreq-epss >>> - qcom,sc7280-cpufreq-epss >>> - qcom,sc8280xp-cpufreq-epss >>> @@ -206,6 +207,21 @@ allOf: >>> interrupt-names: >>> minItems: 2 >>> >>> + - if: >>> + properties: >>> + compatible: >>> + contains: >>> + enum: >>> + - qcom,sa8255p-cpufreq-epss >>> + then: >>> + properties: >>> + reg: >>> + minItems: 2 >>> + maxItems: 2 >>> + >>> + reg-names: >>> + minItems: 2 >>> + maxItems: 2 >> What about interrupts? You need to constrain each of such lists. >> >> Best regards, >> Krzysztof > > Interrupts are not required, I still need to put constraints for It's irrelevant whether they are required or not. Each property should be narrowed. > interrupts? BTW, there is no if block for SA8775p binding in this file. Best regards, Krzysztof
On 9/4/2024 6:17 AM, Krzysztof Kozlowski wrote: > On 04/09/2024 14:27, Nikunj Kela wrote: >> On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote: >>> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote: >>>> Add compatible for the cpufreq engine representing support on SA8255p. >>>> >>>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >>>> --- >>>> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ >>>> 1 file changed, 16 insertions(+) >>>> >>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>> index 1e9797f96410..84865e553c8b 100644 >>>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>> @@ -34,6 +34,7 @@ properties: >>>> items: >>>> - enum: >>>> - qcom,qdu1000-cpufreq-epss >>>> + - qcom,sa8255p-cpufreq-epss >>>> - qcom,sa8775p-cpufreq-epss >>>> - qcom,sc7280-cpufreq-epss >>>> - qcom,sc8280xp-cpufreq-epss >>>> @@ -206,6 +207,21 @@ allOf: >>>> interrupt-names: >>>> minItems: 2 >>>> >>>> + - if: >>>> + properties: >>>> + compatible: >>>> + contains: >>>> + enum: >>>> + - qcom,sa8255p-cpufreq-epss >>>> + then: >>>> + properties: >>>> + reg: >>>> + minItems: 2 >>>> + maxItems: 2 >>>> + >>>> + reg-names: >>>> + minItems: 2 >>>> + maxItems: 2 >>> What about interrupts? You need to constrain each of such lists. >>> >>> Best regards, >>> Krzysztof >> Interrupts are not required, I still need to put constraints for > It's irrelevant whether they are required or not. Each property should > be narrowed. So evenif we don't use interrupts property in our DT(patch#21), we need to mention interrupts here? You suggest we put interrupts with maxItems: 0? I wonder why SA8775p compatible is not in constraint list.. >> interrupts? BTW, there is no if block for SA8775p binding in this file. > > > Best regards, > Krzysztof >
On 04/09/2024 16:19, Nikunj Kela wrote: > > On 9/4/2024 6:17 AM, Krzysztof Kozlowski wrote: >> On 04/09/2024 14:27, Nikunj Kela wrote: >>> On 9/3/2024 11:26 PM, Krzysztof Kozlowski wrote: >>>> On Tue, Sep 03, 2024 at 03:02:33PM -0700, Nikunj Kela wrote: >>>>> Add compatible for the cpufreq engine representing support on SA8255p. >>>>> >>>>> Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> >>>>> --- >>>>> .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ >>>>> 1 file changed, 16 insertions(+) >>>>> >>>>> diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>>> index 1e9797f96410..84865e553c8b 100644 >>>>> --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>>> +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml >>>>> @@ -34,6 +34,7 @@ properties: >>>>> items: >>>>> - enum: >>>>> - qcom,qdu1000-cpufreq-epss >>>>> + - qcom,sa8255p-cpufreq-epss >>>>> - qcom,sa8775p-cpufreq-epss >>>>> - qcom,sc7280-cpufreq-epss >>>>> - qcom,sc8280xp-cpufreq-epss >>>>> @@ -206,6 +207,21 @@ allOf: >>>>> interrupt-names: >>>>> minItems: 2 >>>>> >>>>> + - if: >>>>> + properties: >>>>> + compatible: >>>>> + contains: >>>>> + enum: >>>>> + - qcom,sa8255p-cpufreq-epss >>>>> + then: >>>>> + properties: >>>>> + reg: >>>>> + minItems: 2 >>>>> + maxItems: 2 >>>>> + >>>>> + reg-names: >>>>> + minItems: 2 >>>>> + maxItems: 2 >>>> What about interrupts? You need to constrain each of such lists. >>>> >>>> Best regards, >>>> Krzysztof >>> Interrupts are not required, I still need to put constraints for >> It's irrelevant whether they are required or not. Each property should >> be narrowed. > > So evenif we don't use interrupts property in our DT(patch#21), we need > to mention interrupts here? You suggest we put interrupts with maxItems: 0? I don't understand. You use three quite separate statements. "Not required", "don't use" and here "maxItems: 0" which means not allowed. All of these mean something else and I keep guessing and responding according to what you write. Probably half of my advises are just trash, because it turns out it is something entirely else than what I read. Make a decision how the hardware looks like. > > I wonder why SA8775p compatible is not in constraint list.. > >>> interrupts? BTW, there is no if block for SA8775p binding in this file. >> >> >> Best regards, >> Krzysztof >> Best regards, Krzysztof
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml index 1e9797f96410..84865e553c8b 100644 --- a/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-hw.yaml @@ -34,6 +34,7 @@ properties: items: - enum: - qcom,qdu1000-cpufreq-epss + - qcom,sa8255p-cpufreq-epss - qcom,sa8775p-cpufreq-epss - qcom,sc7280-cpufreq-epss - qcom,sc8280xp-cpufreq-epss @@ -206,6 +207,21 @@ allOf: interrupt-names: minItems: 2 + - if: + properties: + compatible: + contains: + enum: + - qcom,sa8255p-cpufreq-epss + then: + properties: + reg: + minItems: 2 + maxItems: 2 + + reg-names: + minItems: 2 + maxItems: 2 examples: - |
Add compatible for the cpufreq engine representing support on SA8255p. Signed-off-by: Nikunj Kela <quic_nkela@quicinc.com> --- .../bindings/cpufreq/cpufreq-qcom-hw.yaml | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)