new file mode 100644
@@ -0,0 +1,139 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright (c) 2024 STMicroelectronics SA.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/st,vd56g3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics VD56G3 Global Shutter Image Sensor
+
+maintainers:
+ - Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+ - Sylvain Petinot <sylvain.petinot@foss.st.com>
+
+description: |-
+ The STMicroelectronics VD56G3 is a 1.5 M pixel global shutter image sensor
+ with an active array size of 1124 x 1364 (portrait orientation). It is
+ programmable through I2C, the address is fixed to 0x10. The sensor output is
+ available via CSI-2, which is configured as either 1 or 2 data lanes. The
+ sensor provides 8 GPIOS that can be used for external LED signal
+ (synchronized with sensor integration periods)
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ enum:
+ - st,vd56g3
+ - st,vd66gy
+ description:
+ Two variants are availables; VD56G3 is a monochrome sensor while VD66GY
+ is a colour variant.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ vcore-supply:
+ description: Digital core power supply (1.15V)
+
+ vddio-supply:
+ description: Digital IO power supply (1.8V)
+
+ vana-supply:
+ description: Analog power supply (2.8V)
+
+ reset-gpios:
+ description: Sensor reset active low GPIO (XSHUTDOWN)
+ maxItems: 1
+
+ st,leds:
+ description:
+ List sensor's GPIOs used to control strobe light sources during exposure
+ time. The numbers identify the sensor pin on which the illumination system
+ is connected. GPIOs are active-high.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 8
+ items:
+ minimum: 0
+ maximum: 7
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 2
+ items:
+ enum: [1, 2]
+
+ link-frequencies:
+ maxItems: 1
+ items:
+ enum: [402000000, 750000000]
+
+ lane-polarities:
+ minItems: 1
+ maxItems: 3
+ description: Any lane can be inverted or not.
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - vcore-supply
+ - vddio-supply
+ - vana-supply
+ - reset-gpios
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera-sensor@10 {
+ compatible = "st,vd56g3";
+ reg = <0x10>;
+
+ clocks = <&camera_clk_12M>;
+
+ vcore-supply = <&camera_vcore_v1v15>;
+ vddio-supply = <&camera_vddio_v1v8>;
+ vana-supply = <&camera_vana_v2v8>;
+
+ reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
+ st,leds = <6>;
+
+ orientation = <2>;
+ rotation = <0>;
+
+ port {
+ endpoint {
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <402000000>;
+ remote-endpoint = <&csiphy0_ep>;
+ };
+ };
+ };
+ };
@@ -21561,6 +21561,14 @@ S: Maintained
F: Documentation/hwmon/stpddc60.rst
F: drivers/hwmon/pmbus/stpddc60.c
+ST VD56G3 IMAGE SENSOR DRIVER
+M: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
+M: Sylvain Petinot <sylvain.petinot@foss.st.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml
+F: drivers/media/i2c/vd56g3.c
+
ST VGXY61 DRIVER
M: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
M: Sylvain Petinot <sylvain.petinot@foss.st.com>
@@ -23947,6 +23955,7 @@ F: drivers/media/i2c/mt*
F: drivers/media/i2c/og*
F: drivers/media/i2c/ov*
F: drivers/media/i2c/s5*
+F: drivers/media/i2c/vd56g3.c
F: drivers/media/i2c/vgxy61.c
VF610 NAND DRIVER
Add devicetree bindings Documentation for ST VD56G3 & ST VD66GY camera sensors. Update MAINTAINERS file. Signed-off-by: Sylvain Petinot <sylvain.petinot@foss.st.com> --- .../bindings/media/i2c/st,vd56g3.yaml | 139 ++++++++++++++++++ MAINTAINERS | 9 ++ 2 files changed, 148 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/st,vd56g3.yaml