Message ID | F84191BE8AA4A690+20240831135114.497043-1-helugang@uniontech.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | drm/i915:Remove unused parameter in marco. | expand |
On Sat, Aug 31, 2024 at 09:51:14PM +0800, He Lugang wrote: > The parameter dev_priv is actually not used in macro PORT_ALPM_CTL > and PORT_ALPM_LFPS_CTL,so remove it to simplify the code. It is magically used on our back... hence the build failures that CI got. Jani is doing a great clean-up work on the display code to get rid of this 'dev_priv' usages in favor of a better display code separation and using intel_display struct. But thanks for the patch and the interest to help. > > Signed-off-by: He Lugang <helugang@uniontech.com> > --- > drivers/gpu/drm/i915/display/intel_alpm.c | 4 ++-- > drivers/gpu/drm/i915/display/intel_psr.c | 2 +- > drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 ++-- > 3 files changed, 5 insertions(+), 5 deletions(-) > > diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c > index 82ee778b2efe..7a93ba627aa6 100644 > --- a/drivers/gpu/drm/i915/display/intel_alpm.c > +++ b/drivers/gpu/drm/i915/display/intel_alpm.c > @@ -330,7 +330,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, > ALPM_CTL_AUX_LESS_WAKE_TIME(intel_dp->alpm_parameters.aux_less_wake_lines); > > intel_de_write(display, > - PORT_ALPM_CTL(display, port), > + PORT_ALPM_CTL(port), > PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE | > PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) | > PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) | > @@ -338,7 +338,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, > intel_dp->alpm_parameters.silence_period_sym_clocks)); > > intel_de_write(display, > - PORT_ALPM_LFPS_CTL(display, port), > + PORT_ALPM_LFPS_CTL(port), > PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) | > PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION( > intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) | > diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c > index 257526362b39..d66dbb529e1d 100644 > --- a/drivers/gpu/drm/i915/display/intel_psr.c > +++ b/drivers/gpu/drm/i915/display/intel_psr.c > @@ -2076,7 +2076,7 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp) > ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); > > intel_de_rmw(dev_priv, > - PORT_ALPM_CTL(dev_priv, cpu_transcoder), > + PORT_ALPM_CTL(cpu_transcoder), > PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); > } > > diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h > index 642bb15fb547..b4984e589d7e 100644 > --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h > +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h > @@ -295,7 +295,7 @@ > > #define _PORT_ALPM_CTL_A 0x16fa2c > #define _PORT_ALPM_CTL_B 0x16fc2c > -#define PORT_ALPM_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) > +#define PORT_ALPM_CTL(port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) > #define PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE REG_BIT(31) > #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK REG_GENMASK(23, 20) > #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val) REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val) > @@ -306,7 +306,7 @@ > > #define _PORT_ALPM_LFPS_CTL_A 0x16fa30 > #define _PORT_ALPM_LFPS_CTL_B 0x16fc30 > -#define PORT_ALPM_LFPS_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) > +#define PORT_ALPM_LFPS_CTL(port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) > #define PORT_ALPM_LFPS_CTL_LFPS_START_POLARITY REG_BIT(31) > #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MASK REG_GENMASK(27, 24) > #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MIN 7 > -- > 2.45.2 >
On Thu, 05 Sep 2024, Rodrigo Vivi <rodrigo.vivi@intel.com> wrote: > On Sat, Aug 31, 2024 at 09:51:14PM +0800, He Lugang wrote: >> The parameter dev_priv is actually not used in macro PORT_ALPM_CTL >> and PORT_ALPM_LFPS_CTL,so remove it to simplify the code. > > It is magically used on our back... hence the build failures that CI got. > Jani is doing a great clean-up work on the display code to get rid > of this 'dev_priv' usages in favor of a better display code separation > and using intel_display struct. I actually think this should(tm) work. It's just that it needs a rebase. BR, Jani. > > But thanks for the patch and the interest to help. > >> >> Signed-off-by: He Lugang <helugang@uniontech.com> >> --- >> drivers/gpu/drm/i915/display/intel_alpm.c | 4 ++-- >> drivers/gpu/drm/i915/display/intel_psr.c | 2 +- >> drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 ++-- >> 3 files changed, 5 insertions(+), 5 deletions(-) >> >> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c >> index 82ee778b2efe..7a93ba627aa6 100644 >> --- a/drivers/gpu/drm/i915/display/intel_alpm.c >> +++ b/drivers/gpu/drm/i915/display/intel_alpm.c >> @@ -330,7 +330,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, >> ALPM_CTL_AUX_LESS_WAKE_TIME(intel_dp->alpm_parameters.aux_less_wake_lines); >> >> intel_de_write(display, >> - PORT_ALPM_CTL(display, port), >> + PORT_ALPM_CTL(port), >> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE | >> PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) | >> PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) | >> @@ -338,7 +338,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, >> intel_dp->alpm_parameters.silence_period_sym_clocks)); >> >> intel_de_write(display, >> - PORT_ALPM_LFPS_CTL(display, port), >> + PORT_ALPM_LFPS_CTL(port), >> PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) | >> PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION( >> intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) | >> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c >> index 257526362b39..d66dbb529e1d 100644 >> --- a/drivers/gpu/drm/i915/display/intel_psr.c >> +++ b/drivers/gpu/drm/i915/display/intel_psr.c >> @@ -2076,7 +2076,7 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp) >> ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); >> >> intel_de_rmw(dev_priv, >> - PORT_ALPM_CTL(dev_priv, cpu_transcoder), >> + PORT_ALPM_CTL(cpu_transcoder), >> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); >> } >> >> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h >> index 642bb15fb547..b4984e589d7e 100644 >> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h >> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h >> @@ -295,7 +295,7 @@ >> >> #define _PORT_ALPM_CTL_A 0x16fa2c >> #define _PORT_ALPM_CTL_B 0x16fc2c >> -#define PORT_ALPM_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) >> +#define PORT_ALPM_CTL(port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) >> #define PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE REG_BIT(31) >> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK REG_GENMASK(23, 20) >> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val) REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val) >> @@ -306,7 +306,7 @@ >> >> #define _PORT_ALPM_LFPS_CTL_A 0x16fa30 >> #define _PORT_ALPM_LFPS_CTL_B 0x16fc30 >> -#define PORT_ALPM_LFPS_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) >> +#define PORT_ALPM_LFPS_CTL(port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) >> #define PORT_ALPM_LFPS_CTL_LFPS_START_POLARITY REG_BIT(31) >> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MASK REG_GENMASK(27, 24) >> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MIN 7 >> -- >> 2.45.2 >>
在 2024/9/6 01:08, Jani Nikula 写道: > On Thu, 05 Sep 2024, Rodrigo Vivi <rodrigo.vivi@intel.com> wrote: >> On Sat, Aug 31, 2024 at 09:51:14PM +0800, He Lugang wrote: >>> The parameter dev_priv is actually not used in macro PORT_ALPM_CTL >>> and PORT_ALPM_LFPS_CTL,so remove it to simplify the code. >> >> It is magically used on our back... hence the build failures that CI got. >> Jani is doing a great clean-up work on the display code to get rid >> of this 'dev_priv' usages in favor of a better display code separation >> and using intel_display struct. > > I actually think this should(tm) work. It's just that it needs a rebase. > > BR, > Jani. > OK,thannks for your reply,I'll rebase it. >> >> But thanks for the patch and the interest to help. >> Very glad if that will be help! >>> >>> Signed-off-by: He Lugang <helugang@uniontech.com> >>> --- >>> drivers/gpu/drm/i915/display/intel_alpm.c | 4 ++-- >>> drivers/gpu/drm/i915/display/intel_psr.c | 2 +- >>> drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 ++-- >>> 3 files changed, 5 insertions(+), 5 deletions(-) >>> >>> diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c >>> index 82ee778b2efe..7a93ba627aa6 100644 >>> --- a/drivers/gpu/drm/i915/display/intel_alpm.c >>> +++ b/drivers/gpu/drm/i915/display/intel_alpm.c >>> @@ -330,7 +330,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, >>> ALPM_CTL_AUX_LESS_WAKE_TIME(intel_dp->alpm_parameters.aux_less_wake_lines); >>> >>> intel_de_write(display, >>> - PORT_ALPM_CTL(display, port), >>> + PORT_ALPM_CTL(port), >>> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE | >>> PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) | >>> PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) | >>> @@ -338,7 +338,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, >>> intel_dp->alpm_parameters.silence_period_sym_clocks)); >>> >>> intel_de_write(display, >>> - PORT_ALPM_LFPS_CTL(display, port), >>> + PORT_ALPM_LFPS_CTL(port), >>> PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) | >>> PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION( >>> intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) | >>> diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c >>> index 257526362b39..d66dbb529e1d 100644 >>> --- a/drivers/gpu/drm/i915/display/intel_psr.c >>> +++ b/drivers/gpu/drm/i915/display/intel_psr.c >>> @@ -2076,7 +2076,7 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp) >>> ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); >>> >>> intel_de_rmw(dev_priv, >>> - PORT_ALPM_CTL(dev_priv, cpu_transcoder), >>> + PORT_ALPM_CTL(cpu_transcoder), >>> PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); >>> } >>> >>> diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h >>> index 642bb15fb547..b4984e589d7e 100644 >>> --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h >>> +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h >>> @@ -295,7 +295,7 @@ >>> >>> #define _PORT_ALPM_CTL_A 0x16fa2c >>> #define _PORT_ALPM_CTL_B 0x16fc2c >>> -#define PORT_ALPM_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) >>> +#define PORT_ALPM_CTL(port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) >>> #define PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE REG_BIT(31) >>> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK REG_GENMASK(23, 20) >>> #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val) REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val) >>> @@ -306,7 +306,7 @@ >>> >>> #define _PORT_ALPM_LFPS_CTL_A 0x16fa30 >>> #define _PORT_ALPM_LFPS_CTL_B 0x16fc30 >>> -#define PORT_ALPM_LFPS_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) >>> +#define PORT_ALPM_LFPS_CTL(port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) >>> #define PORT_ALPM_LFPS_CTL_LFPS_START_POLARITY REG_BIT(31) >>> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MASK REG_GENMASK(27, 24) >>> #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MIN 7 >>> -- >>> 2.45.2 >>> >
diff --git a/drivers/gpu/drm/i915/display/intel_alpm.c b/drivers/gpu/drm/i915/display/intel_alpm.c index 82ee778b2efe..7a93ba627aa6 100644 --- a/drivers/gpu/drm/i915/display/intel_alpm.c +++ b/drivers/gpu/drm/i915/display/intel_alpm.c @@ -330,7 +330,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, ALPM_CTL_AUX_LESS_WAKE_TIME(intel_dp->alpm_parameters.aux_less_wake_lines); intel_de_write(display, - PORT_ALPM_CTL(display, port), + PORT_ALPM_CTL(port), PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE | PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(15) | PORT_ALPM_CTL_MAX_PHY_SWING_HOLD(0) | @@ -338,7 +338,7 @@ static void lnl_alpm_configure(struct intel_dp *intel_dp, intel_dp->alpm_parameters.silence_period_sym_clocks)); intel_de_write(display, - PORT_ALPM_LFPS_CTL(display, port), + PORT_ALPM_LFPS_CTL(port), PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT(10) | PORT_ALPM_LFPS_CTL_LFPS_HALF_CYCLE_DURATION( intel_dp->alpm_parameters.lfps_half_cycle_num_of_syms) | diff --git a/drivers/gpu/drm/i915/display/intel_psr.c b/drivers/gpu/drm/i915/display/intel_psr.c index 257526362b39..d66dbb529e1d 100644 --- a/drivers/gpu/drm/i915/display/intel_psr.c +++ b/drivers/gpu/drm/i915/display/intel_psr.c @@ -2076,7 +2076,7 @@ static void intel_psr_disable_locked(struct intel_dp *intel_dp) ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); intel_de_rmw(dev_priv, - PORT_ALPM_CTL(dev_priv, cpu_transcoder), + PORT_ALPM_CTL(cpu_transcoder), PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE, 0); } diff --git a/drivers/gpu/drm/i915/display/intel_psr_regs.h b/drivers/gpu/drm/i915/display/intel_psr_regs.h index 642bb15fb547..b4984e589d7e 100644 --- a/drivers/gpu/drm/i915/display/intel_psr_regs.h +++ b/drivers/gpu/drm/i915/display/intel_psr_regs.h @@ -295,7 +295,7 @@ #define _PORT_ALPM_CTL_A 0x16fa2c #define _PORT_ALPM_CTL_B 0x16fc2c -#define PORT_ALPM_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) +#define PORT_ALPM_CTL(port) _MMIO_PORT(port, _PORT_ALPM_CTL_A, _PORT_ALPM_CTL_B) #define PORT_ALPM_CTL_ALPM_AUX_LESS_ENABLE REG_BIT(31) #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK REG_GENMASK(23, 20) #define PORT_ALPM_CTL_MAX_PHY_SWING_SETUP(val) REG_FIELD_PREP(PORT_ALPM_CTL_MAX_PHY_SWING_SETUP_MASK, val) @@ -306,7 +306,7 @@ #define _PORT_ALPM_LFPS_CTL_A 0x16fa30 #define _PORT_ALPM_LFPS_CTL_B 0x16fc30 -#define PORT_ALPM_LFPS_CTL(dev_priv, port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) +#define PORT_ALPM_LFPS_CTL(port) _MMIO_PORT(port, _PORT_ALPM_LFPS_CTL_A, _PORT_ALPM_LFPS_CTL_B) #define PORT_ALPM_LFPS_CTL_LFPS_START_POLARITY REG_BIT(31) #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MASK REG_GENMASK(27, 24) #define PORT_ALPM_LFPS_CTL_LFPS_CYCLE_COUNT_MIN 7
The parameter dev_priv is actually not used in macro PORT_ALPM_CTL and PORT_ALPM_LFPS_CTL,so remove it to simplify the code. Signed-off-by: He Lugang <helugang@uniontech.com> --- drivers/gpu/drm/i915/display/intel_alpm.c | 4 ++-- drivers/gpu/drm/i915/display/intel_psr.c | 2 +- drivers/gpu/drm/i915/display/intel_psr_regs.h | 4 ++-- 3 files changed, 5 insertions(+), 5 deletions(-)