| Message ID | 1342097668-25243-6-git-send-email-thomas.abraham@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 12 July 2012 18:24, Thomas Abraham <thomas.abraham@linaro.org> wrote: > Add device tree based discovery support. > > Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> > --- > .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 108 +++++++++++ > drivers/mmc/host/dw_mmc-pltfm.c | 24 +++ > drivers/mmc/host/dw_mmc.c | 201 +++++++++++++++++++- > drivers/mmc/host/dw_mmc.h | 9 + > include/linux/mmc/dw_mmc.h | 2 + > 5 files changed, 338 insertions(+), 6 deletions(-) > create mode 100644 Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > > diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > new file mode 100644 > index 0000000..3acd6c9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > @@ -0,0 +1,108 @@ > +* Synopsis Designware Mobile Storage Host Controller > + > +The Synopsis designware mobile storage host controller is used to interface > +a SoC with storage medium such as eMMC or SD/MMC cards. > + > +Required Properties: > + > +* compatible: should be one of the following > + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. > + > +* reg: physical base address of the dw-mshc controller and size of its memory > + region. > + > +* interrupts: interrupt specifier for the controller. The format and value of > + the interrupt specifier depends on the interrupt parent for the controller. > + > +* #address-cells: should be 1. > + > +* #size-cells: should be 0. > + > +# Slots: The slot specific information are contained within child-nodes with > + each child-node representing a supported slot. There should be atleast one > + child node representing a card slot. The name of the child node representing > + the slot is recommended to be slot@n where n is the unique number of the slot > + connnected to the controller. The following are optional properties which > + can be included in the slot child node. > + > + * reg: specifies the physical slot number. The valid values of this > + property is 0 to (num-slots -1), where num-slots is the value > + specified by the num-slots property. > + > + * bus-width: specifies the width of the data bus connected from the > + controller to the card slot. The value should be 1, 4 or 8. In case > + this property is not specified, a default value of 1 is assumed for > + this property. > + > + * cd-gpios: specifies the card detect gpio line. The format of the > + gpio specifier depends on the gpio controller. > + > + * wp-gpios: specifies the write protect gpio line. The format of the > + gpio specifier depends on the gpio controller. > + > + * gpios: specifies a list of gpios used for command, clock and data > + bus. The first gpio is the command line and the second gpio is the > + clock line. The rest of the gpios (depending on the bus-width > + property) are the data lines in no particular order. The format of > + the gpio specifier depends on the gpio controller. > + > +Optional properties: > + > +* num-slots: specifies the number of slots supported by the controller. > + The number of physical slots actually used could be equal or less than the > + value specified by num-slots. If this property is not specified, the value > + of num-slot property is assumed to be 1. > + > +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not > + specified, the default value of the fifo size is determined from the > + controller registers. > + > +* card-detect-delay: Delay in milli-seconds before detecting card after card > + insert event. The default value is 0. > + > +* supports-highspeed: Enables support for high speed cards (upto 50MHz) > + > +* card-detection-broken: The card detection functionality is not available on > + any of the slots. > + > +* no-write-protect: The write protect pad of the controller is not connected > + to the write protect pin on the slot. > + > +Aliases: > + > +- All the MSHC controller nodes should be represented in the aliases node using > + the following format 'mshc{n}' where n is a unique number for the alias. > + > + > +Example: > + > + The MSHC controller node can be split into two portions, SoC specific and > + board specific portions as listed below. > + > + dwmmc0@12200000 { > + compatible = "snps,dw-mshc"; > + reg = <0x12200000 0x1000>; > + interrupts = <0 75 0>; > + #address-cells = <1>; > + #size-cells = <0>; > + }; > + > + dwmmc0@12200000 { > + num-slots = <1>; > + supports-highspeed; > + card-detection-broken; > + no-write-protect; > + fifo-depth = <0x80>; > + card-detect-delay = <200>; > + > + slot@0 { > + reg = <0>; > + bus-width = <8>; > + cd-gpios = <&gpc0 2 2 3 3>; > + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, > + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, > + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, > + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, > + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; > + }; > + }; > diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c > index 9a63299..8d24f6d 100644 > --- a/drivers/mmc/host/dw_mmc-pltfm.c > +++ b/drivers/mmc/host/dw_mmc-pltfm.c > @@ -19,8 +19,24 @@ > #include <linux/mmc/host.h> > #include <linux/mmc/mmc.h> > #include <linux/mmc/dw_mmc.h> > +#include <linux/of.h> > #include "dw_mmc.h" > > +#ifdef CONFIG_OF > +static struct dw_mci_drv_data synopsis_drv_data = { > + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, > +}; > + > +static const struct of_device_id dw_mci_pltfm_match[] = { > + { .compatible = "snps,dw-mshc", > + .data = (void *)&synopsis_drv_data, }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); > +#else > +static const struct of_device_id dw_mci_pltfm_match[]; the #else and a statement can be completely removed if of_match_ptr is used while accessing the dw_mci_pltfm_match in of_match_node function. > +#endif > + > static int dw_mci_pltfm_probe(struct platform_device *pdev) > { > struct dw_mci *host; > @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device *pdev) > if (!host->regs) > goto err_free; > platform_set_drvdata(pdev, host); > + > + if (pdev->dev.of_node) { > + const struct of_device_id *match; > + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); can be modified to of_match_node(of_match_pt(dw_mci_pltfm_match), pdev->dev.of_node); This will remove the dummy allocation of variable as mentioned above. Also it will be generic in non dt case. > + host->drv_data = match->data; > + } > + > ret = dw_mci_probe(host); > if (ret) > goto err_out; > @@ -111,6 +134,7 @@ static struct platform_driver dw_mci_pltfm_driver = { > .remove = __exit_p(dw_mci_pltfm_remove), > .driver = { > .name = "dw_mmc", > + .of_match_table = of_match_ptr(dw_mci_pltfm_match), > .pm = &dw_mci_pltfm_pmops, > }, > }; > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 075f89d..3bc276d 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -33,9 +33,13 @@ > #include <linux/bitops.h> > #include <linux/regulator/consumer.h> > #include <linux/workqueue.h> > +#include <linux/of.h> > +#include <linux/of_gpio.h> > > #include "dw_mmc.h" > > +#define NUM_PINS(x) (x + 2) > + > /* Common flag combinations */ > #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ > SDMMC_INT_HTO | SDMMC_INT_SBE | \ > @@ -86,6 +90,8 @@ struct idmac_desc { > struct dw_mci_slot { > struct mmc_host *mmc; > struct dw_mci *host; > + int wp_gpio; > + int cd_gpio; > > u32 ctype; > > @@ -1762,10 +1768,106 @@ static void dw_mci_work_routine_card(struct work_struct *work) > } > } > > +#ifdef CONFIG_OF > +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) > +{ > + struct device_node *np; > + const __be32 *addr; > + int len; > + > + if (!dev || !dev->of_node) > + return NULL; > + > + for_each_child_of_node(dev->of_node, np) { > + addr = of_get_property(np, "reg", &len); > + if (!addr || (len < sizeof(int))) > + continue; > + if (be32_to_cpup(addr) == slot) > + return np; > + } > + return NULL; > +} > + > +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) > +{ > + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); > + u32 bus_wd = 1; > + > + if (!np) > + return 1; > + > + if (of_property_read_u32(np, "bus-width", &bus_wd)) > + dev_err(dev, "bus-width property not found, assuming width" > + " as 1\n"); > + return bus_wd; > +} > + > +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) > +{ > + struct device_node *np = dw_mci_of_find_slot_node(host->dev, slot); > + int idx, gpio, ret; > + > + if (!np) > + return -EINVAL; > + > + for (idx = 0; idx < NUM_PINS(bus_wd); idx++) { > + gpio = of_get_gpio(np, idx); > + if (!gpio_is_valid(gpio)) { > + dev_err(host->dev, "invalid gpio: %d\n", gpio); > + return -EINVAL; > + } > + > + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); > + if (ret) { > + dev_err(host->dev, "gpio [%d] request failed\n", gpio); > + return -EBUSY; > + } > + } > + > + host->slot[slot]->wp_gpio = -1; > + gpio = of_get_named_gpio(np, "wp-gpios", 0); > + if (!gpio_is_valid(gpio)) { > + dev_info(host->dev, "wp gpio not available"); > + } else { > + ret = devm_gpio_request(host->dev, gpio, "dw-mci-wp"); > + if (ret) > + dev_info(host->dev, "gpio [%d] request failed\n", > + gpio); > + else > + host->slot[slot]->wp_gpio = gpio; > + } > + > + host->slot[slot]->cd_gpio = -1; > + gpio = of_get_named_gpio(np, "cd-gpios", 0); > + if (!gpio_is_valid(gpio)) { > + dev_info(host->dev, "cd gpio not available"); > + } else { > + ret = devm_gpio_request(host->dev, gpio, "dw-mci-cd"); > + if (ret) > + dev_err(host->dev, "gpio [%d] request failed\n", gpio); > + else > + host->slot[slot]->cd_gpio = gpio; > + } > + > + return 0; > +} > +#else /* CONFIG_OF */ > +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) > +{ > + return 1; > +} > + > +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) > +{ > + return -EINVAL; > +} > +#endif /* CONFIG_OF */ > + > static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > { > struct mmc_host *mmc; > struct dw_mci_slot *slot; > + int ctrl_id, ret; > > mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); > if (!mmc) > @@ -1775,6 +1877,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > slot->id = id; > slot->mmc = mmc; > slot->host = host; > + host->slot[id] = slot; > > mmc->ops = &dw_mci_ops; > mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); > @@ -1795,12 +1898,33 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + if (host->dev->of_node) { > + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); > + if (ctrl_id < 0) > + ctrl_id = 0; > + } > + if (host->drv_data->caps) > + mmc->caps |= host->drv_data->caps[ctrl_id]; > + > if (host->pdata->caps2) > mmc->caps2 = host->pdata->caps2; > > - if (host->pdata->get_bus_wd) > + if (host->pdata->get_bus_wd) { > if (host->pdata->get_bus_wd(slot->id) >= 4) > mmc->caps |= MMC_CAP_4_BIT_DATA; > + } else if (host->dev->of_node) { > + unsigned int bus_width; > + bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); > + switch (bus_width) { > + case 8: > + mmc->caps |= MMC_CAP_8_BIT_DATA; > + case 4: > + mmc->caps |= MMC_CAP_4_BIT_DATA; > + } > + ret = dw_mci_of_setup_bus(host, slot->id, bus_width); > + if (ret) > + goto err_setup_bus; > + } > > if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) > mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; > @@ -1845,7 +1969,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > else > clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); > > - host->slot[id] = slot; > mmc_add_host(mmc); > > #if defined(CONFIG_DEBUG_FS) > @@ -1862,6 +1985,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > queue_work(host->card_workqueue, &host->card_work); > > return 0; > + > +err_setup_bus: > + mmc_free_host(mmc); > + return -EINVAL; > } > > static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) > @@ -1937,16 +2064,78 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) > return false; > } > > +#ifdef CONFIG_OF > +static struct dw_mci_of_quirks { > + char *quirk; > + int id; > +} of_quriks[] = { > + { > + .quirk = "supports-highspeed", > + .id = DW_MCI_QUIRK_HIGHSPEED, > + }, { > + .quirk = "card-detection-broken", > + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, > + }, { > + .quirk = "no-write-protect", > + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, > + } > +}; > + > +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) > +{ > + struct dw_mci_board *pdata; > + struct device *dev = host->dev; > + struct device_node *np = dev->of_node; > + int idx, cnt; > + > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) { > + dev_err(dev, "could not allocate memory for pdata\n"); > + return ERR_PTR(-ENOMEM); > + } > + > + /* find out number of slots supported */ > + if (of_property_read_u32(dev->of_node, "num-slots", > + &pdata->num_slots)) { > + dev_info(dev, "num-slots property not found, " > + "assuming 1 slot is available\n"); > + pdata->num_slots = 1; > + } > + > + /* get quirks */ > + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); > + for (idx = 0; idx < cnt; idx++) > + if (of_get_property(np, of_quriks[idx].quirk, NULL)) > + pdata->quirks |= of_quriks[idx].id; > + > + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) > + dev_info(dev, "fifo-depth property not found, using " > + "value of FIFOTH register as default\n"); > + > + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); > + > + return pdata; > +} > + > +#else /* CONFIG_OF */ > +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) > +{ > + return ERR_PTR(-EINVAL); > +} > +#endif /* CONFIG_OF */ > + > int dw_mci_probe(struct dw_mci *host) > { > int width, i, ret = 0; > u32 fifo_size; > int init_slots = 0; > > - if (!host->pdata || !host->pdata->init) { > - dev_err(host->dev, > - "Platform data must supply init function\n"); > - return -ENODEV; > + if (!host->pdata) { > + host->pdata = dw_mci_parse_dt(host); > + if (IS_ERR(host->pdata)) { > + dev_err(host->dev, "platform data not available\n"); > + return -EINVAL; > + } > } > > if (!host->pdata->select_slot && host->pdata->num_slots > 1) { > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 15c27e1..1ecaa02 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -182,4 +182,13 @@ extern int dw_mci_suspend(struct dw_mci *host); > extern int dw_mci_resume(struct dw_mci *host); > #endif > > +/* Variations in the dw_mci controller */ > +#define DW_MCI_TYPE_SYNOPSIS 0 > + > +/* dw_mci platform driver data */ > +struct dw_mci_drv_data { > + unsigned long ctrl_type; > + unsigned long *caps; > +}; > + > #endif /* _DW_MMC_H_ */ > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index b72e4aa..ae45e4f 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -78,6 +78,7 @@ struct mmc_data; > * @data_offset: Set the offset of DATA register according to VERID. > * @dev: Device associated with the MMC controller. > * @pdata: Platform data associated with the MMC controller. > + * @drv_data: Driver specific data for identified variant of the controller > * @biu_clk: Pointer to bus interface unit clock instance. > * @ciu_clk: Pointer to card interface unit clock instance. > * @slot: Slots sharing this MMC controller. > @@ -160,6 +161,7 @@ struct dw_mci { > u16 data_offset; > struct device *dev; > struct dw_mci_board *pdata; > + struct dw_mci_drv_data *drv_data; > struct clk *biu_clk; > struct clk *ciu_clk; > struct dw_mci_slot *slot[MAX_MCI_SLOTS]; > -- > 1.6.6.rc2 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html
Hi, On Thu, Jul 12 2012, Thomas Abraham wrote: > diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > new file mode 100644 > index 0000000..3acd6c9 > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > @@ -0,0 +1,108 @@ > +* Synopsis Designware Mobile Storage Host Controller > + > +The Synopsis designware mobile storage host controller is used to interface > +a SoC with storage medium such as eMMC or SD/MMC cards. > + > +Required Properties: > + > +* compatible: should be one of the following > + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. > + > +* reg: physical base address of the dw-mshc controller and size of its memory > + region. > + > +* interrupts: interrupt specifier for the controller. The format and value of > + the interrupt specifier depends on the interrupt parent for the controller. Please instead add: This file documents differences between the core properties described by mmc.txt and the properties used by the dw_mmc driver. mmc.txt already describes compatible, reg, interrupts, bus-width, cd-gpios, and wp-gpios, so you don't need to describe those again. > + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); > + for (idx = 0; idx < cnt; idx++) > + if (of_get_property(np, of_quriks[idx].quirk, NULL)) > + pdata->quirks |= of_quriks[idx].id; of_quirks, not of_quriks. Thanks, - Chris.
On 16 July 2012 09:45, Girish K S <girish.shivananjappa@linaro.org> wrote: > On 12 July 2012 18:24, Thomas Abraham <thomas.abraham@linaro.org> wrote: >> Add device tree based discovery support. >> >> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> >> --- >> .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 108 +++++++++++ >> drivers/mmc/host/dw_mmc-pltfm.c | 24 +++ >> drivers/mmc/host/dw_mmc.c | 201 +++++++++++++++++++- >> drivers/mmc/host/dw_mmc.h | 9 + >> include/linux/mmc/dw_mmc.h | 2 + >> 5 files changed, 338 insertions(+), 6 deletions(-) >> create mode 100644 Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt >> >> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt >> new file mode 100644 >> index 0000000..3acd6c9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt >> @@ -0,0 +1,108 @@ >> +* Synopsis Designware Mobile Storage Host Controller >> + >> +The Synopsis designware mobile storage host controller is used to interface >> +a SoC with storage medium such as eMMC or SD/MMC cards. >> + >> +Required Properties: >> + >> +* compatible: should be one of the following >> + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. >> + >> +* reg: physical base address of the dw-mshc controller and size of its memory >> + region. >> + >> +* interrupts: interrupt specifier for the controller. The format and value of >> + the interrupt specifier depends on the interrupt parent for the controller. >> + >> +* #address-cells: should be 1. >> + >> +* #size-cells: should be 0. >> + >> +# Slots: The slot specific information are contained within child-nodes with >> + each child-node representing a supported slot. There should be atleast one >> + child node representing a card slot. The name of the child node representing >> + the slot is recommended to be slot@n where n is the unique number of the slot >> + connnected to the controller. The following are optional properties which >> + can be included in the slot child node. >> + >> + * reg: specifies the physical slot number. The valid values of this >> + property is 0 to (num-slots -1), where num-slots is the value >> + specified by the num-slots property. >> + >> + * bus-width: specifies the width of the data bus connected from the >> + controller to the card slot. The value should be 1, 4 or 8. In case >> + this property is not specified, a default value of 1 is assumed for >> + this property. >> + >> + * cd-gpios: specifies the card detect gpio line. The format of the >> + gpio specifier depends on the gpio controller. >> + >> + * wp-gpios: specifies the write protect gpio line. The format of the >> + gpio specifier depends on the gpio controller. >> + >> + * gpios: specifies a list of gpios used for command, clock and data >> + bus. The first gpio is the command line and the second gpio is the >> + clock line. The rest of the gpios (depending on the bus-width >> + property) are the data lines in no particular order. The format of >> + the gpio specifier depends on the gpio controller. >> + >> +Optional properties: >> + >> +* num-slots: specifies the number of slots supported by the controller. >> + The number of physical slots actually used could be equal or less than the >> + value specified by num-slots. If this property is not specified, the value >> + of num-slot property is assumed to be 1. >> + >> +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not >> + specified, the default value of the fifo size is determined from the >> + controller registers. >> + >> +* card-detect-delay: Delay in milli-seconds before detecting card after card >> + insert event. The default value is 0. >> + >> +* supports-highspeed: Enables support for high speed cards (upto 50MHz) >> + >> +* card-detection-broken: The card detection functionality is not available on >> + any of the slots. >> + >> +* no-write-protect: The write protect pad of the controller is not connected >> + to the write protect pin on the slot. >> + >> +Aliases: >> + >> +- All the MSHC controller nodes should be represented in the aliases node using >> + the following format 'mshc{n}' where n is a unique number for the alias. >> + >> + >> +Example: >> + >> + The MSHC controller node can be split into two portions, SoC specific and >> + board specific portions as listed below. >> + >> + dwmmc0@12200000 { >> + compatible = "snps,dw-mshc"; >> + reg = <0x12200000 0x1000>; >> + interrupts = <0 75 0>; >> + #address-cells = <1>; >> + #size-cells = <0>; >> + }; >> + >> + dwmmc0@12200000 { >> + num-slots = <1>; >> + supports-highspeed; >> + card-detection-broken; >> + no-write-protect; >> + fifo-depth = <0x80>; >> + card-detect-delay = <200>; >> + >> + slot@0 { >> + reg = <0>; >> + bus-width = <8>; >> + cd-gpios = <&gpc0 2 2 3 3>; >> + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, >> + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, >> + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, >> + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, >> + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; >> + }; >> + }; >> diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c >> index 9a63299..8d24f6d 100644 >> --- a/drivers/mmc/host/dw_mmc-pltfm.c >> +++ b/drivers/mmc/host/dw_mmc-pltfm.c >> @@ -19,8 +19,24 @@ >> #include <linux/mmc/host.h> >> #include <linux/mmc/mmc.h> >> #include <linux/mmc/dw_mmc.h> >> +#include <linux/of.h> >> #include "dw_mmc.h" >> >> +#ifdef CONFIG_OF >> +static struct dw_mci_drv_data synopsis_drv_data = { >> + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, >> +}; >> + >> +static const struct of_device_id dw_mci_pltfm_match[] = { >> + { .compatible = "snps,dw-mshc", >> + .data = (void *)&synopsis_drv_data, }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); >> +#else >> +static const struct of_device_id dw_mci_pltfm_match[]; > the #else and a statement can be completely removed if of_match_ptr is > used while accessing the dw_mci_pltfm_match in of_match_node function. >> +#endif >> + >> static int dw_mci_pltfm_probe(struct platform_device *pdev) >> { >> struct dw_mci *host; >> @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device *pdev) >> if (!host->regs) >> goto err_free; >> platform_set_drvdata(pdev, host); >> + >> + if (pdev->dev.of_node) { >> + const struct of_device_id *match; >> + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); > can be modified to of_match_node(of_match_pt(dw_mci_pltfm_match), > pdev->dev.of_node); > This will remove the dummy allocation of variable as mentioned above. Sorry not allocation but declaration > Also it will be generic in non dt case. >> + host->drv_data = match->data; >> + } >> + >> ret = dw_mci_probe(host); >> if (ret) >> goto err_out; >> @@ -111,6 +134,7 @@ static struct platform_driver dw_mci_pltfm_driver = { >> .remove = __exit_p(dw_mci_pltfm_remove), >> .driver = { >> .name = "dw_mmc", >> + .of_match_table = of_match_ptr(dw_mci_pltfm_match), >> .pm = &dw_mci_pltfm_pmops, >> }, >> }; >> diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c >> index 075f89d..3bc276d 100644 >> --- a/drivers/mmc/host/dw_mmc.c >> +++ b/drivers/mmc/host/dw_mmc.c >> @@ -33,9 +33,13 @@ >> #include <linux/bitops.h> >> #include <linux/regulator/consumer.h> >> #include <linux/workqueue.h> >> +#include <linux/of.h> >> +#include <linux/of_gpio.h> >> >> #include "dw_mmc.h" >> >> +#define NUM_PINS(x) (x + 2) >> + >> /* Common flag combinations */ >> #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ >> SDMMC_INT_HTO | SDMMC_INT_SBE | \ >> @@ -86,6 +90,8 @@ struct idmac_desc { >> struct dw_mci_slot { >> struct mmc_host *mmc; >> struct dw_mci *host; >> + int wp_gpio; >> + int cd_gpio; >> >> u32 ctype; >> >> @@ -1762,10 +1768,106 @@ static void dw_mci_work_routine_card(struct work_struct *work) >> } >> } >> >> +#ifdef CONFIG_OF >> +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) >> +{ >> + struct device_node *np; >> + const __be32 *addr; >> + int len; >> + >> + if (!dev || !dev->of_node) >> + return NULL; >> + >> + for_each_child_of_node(dev->of_node, np) { >> + addr = of_get_property(np, "reg", &len); >> + if (!addr || (len < sizeof(int))) >> + continue; >> + if (be32_to_cpup(addr) == slot) >> + return np; >> + } >> + return NULL; >> +} >> + >> +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) >> +{ >> + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); >> + u32 bus_wd = 1; >> + >> + if (!np) >> + return 1; >> + >> + if (of_property_read_u32(np, "bus-width", &bus_wd)) >> + dev_err(dev, "bus-width property not found, assuming width" >> + " as 1\n"); >> + return bus_wd; >> +} >> + >> +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) >> +{ >> + struct device_node *np = dw_mci_of_find_slot_node(host->dev, slot); >> + int idx, gpio, ret; >> + >> + if (!np) >> + return -EINVAL; >> + >> + for (idx = 0; idx < NUM_PINS(bus_wd); idx++) { >> + gpio = of_get_gpio(np, idx); >> + if (!gpio_is_valid(gpio)) { >> + dev_err(host->dev, "invalid gpio: %d\n", gpio); >> + return -EINVAL; >> + } >> + >> + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); >> + if (ret) { >> + dev_err(host->dev, "gpio [%d] request failed\n", gpio); >> + return -EBUSY; >> + } >> + } >> + >> + host->slot[slot]->wp_gpio = -1; >> + gpio = of_get_named_gpio(np, "wp-gpios", 0); >> + if (!gpio_is_valid(gpio)) { >> + dev_info(host->dev, "wp gpio not available"); >> + } else { >> + ret = devm_gpio_request(host->dev, gpio, "dw-mci-wp"); >> + if (ret) >> + dev_info(host->dev, "gpio [%d] request failed\n", >> + gpio); >> + else >> + host->slot[slot]->wp_gpio = gpio; >> + } >> + >> + host->slot[slot]->cd_gpio = -1; >> + gpio = of_get_named_gpio(np, "cd-gpios", 0); >> + if (!gpio_is_valid(gpio)) { >> + dev_info(host->dev, "cd gpio not available"); >> + } else { >> + ret = devm_gpio_request(host->dev, gpio, "dw-mci-cd"); >> + if (ret) >> + dev_err(host->dev, "gpio [%d] request failed\n", gpio); >> + else >> + host->slot[slot]->cd_gpio = gpio; >> + } >> + >> + return 0; >> +} >> +#else /* CONFIG_OF */ >> +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) >> +{ >> + return 1; >> +} >> + >> +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) >> +{ >> + return -EINVAL; >> +} >> +#endif /* CONFIG_OF */ >> + >> static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> { >> struct mmc_host *mmc; >> struct dw_mci_slot *slot; >> + int ctrl_id, ret; >> >> mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); >> if (!mmc) >> @@ -1775,6 +1877,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> slot->id = id; >> slot->mmc = mmc; >> slot->host = host; >> + host->slot[id] = slot; >> >> mmc->ops = &dw_mci_ops; >> mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); >> @@ -1795,12 +1898,33 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> if (host->pdata->caps) >> mmc->caps = host->pdata->caps; >> >> + if (host->dev->of_node) { >> + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); >> + if (ctrl_id < 0) >> + ctrl_id = 0; >> + } >> + if (host->drv_data->caps) >> + mmc->caps |= host->drv_data->caps[ctrl_id]; >> + >> if (host->pdata->caps2) >> mmc->caps2 = host->pdata->caps2; >> >> - if (host->pdata->get_bus_wd) >> + if (host->pdata->get_bus_wd) { >> if (host->pdata->get_bus_wd(slot->id) >= 4) >> mmc->caps |= MMC_CAP_4_BIT_DATA; >> + } else if (host->dev->of_node) { >> + unsigned int bus_width; >> + bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); >> + switch (bus_width) { >> + case 8: >> + mmc->caps |= MMC_CAP_8_BIT_DATA; >> + case 4: >> + mmc->caps |= MMC_CAP_4_BIT_DATA; >> + } >> + ret = dw_mci_of_setup_bus(host, slot->id, bus_width); >> + if (ret) >> + goto err_setup_bus; >> + } >> >> if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) >> mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; >> @@ -1845,7 +1969,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> else >> clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); >> >> - host->slot[id] = slot; >> mmc_add_host(mmc); >> >> #if defined(CONFIG_DEBUG_FS) >> @@ -1862,6 +1985,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) >> queue_work(host->card_workqueue, &host->card_work); >> >> return 0; >> + >> +err_setup_bus: >> + mmc_free_host(mmc); >> + return -EINVAL; >> } >> >> static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) >> @@ -1937,16 +2064,78 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) >> return false; >> } >> >> +#ifdef CONFIG_OF >> +static struct dw_mci_of_quirks { >> + char *quirk; >> + int id; >> +} of_quriks[] = { >> + { >> + .quirk = "supports-highspeed", >> + .id = DW_MCI_QUIRK_HIGHSPEED, >> + }, { >> + .quirk = "card-detection-broken", >> + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, >> + }, { >> + .quirk = "no-write-protect", >> + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, >> + } >> +}; >> + >> +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) >> +{ >> + struct dw_mci_board *pdata; >> + struct device *dev = host->dev; >> + struct device_node *np = dev->of_node; >> + int idx, cnt; >> + >> + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); >> + if (!pdata) { >> + dev_err(dev, "could not allocate memory for pdata\n"); >> + return ERR_PTR(-ENOMEM); >> + } >> + >> + /* find out number of slots supported */ >> + if (of_property_read_u32(dev->of_node, "num-slots", >> + &pdata->num_slots)) { >> + dev_info(dev, "num-slots property not found, " >> + "assuming 1 slot is available\n"); >> + pdata->num_slots = 1; >> + } >> + >> + /* get quirks */ >> + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); >> + for (idx = 0; idx < cnt; idx++) >> + if (of_get_property(np, of_quriks[idx].quirk, NULL)) >> + pdata->quirks |= of_quriks[idx].id; >> + >> + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) >> + dev_info(dev, "fifo-depth property not found, using " >> + "value of FIFOTH register as default\n"); >> + >> + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); >> + >> + return pdata; >> +} >> + >> +#else /* CONFIG_OF */ >> +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) >> +{ >> + return ERR_PTR(-EINVAL); >> +} >> +#endif /* CONFIG_OF */ >> + >> int dw_mci_probe(struct dw_mci *host) >> { >> int width, i, ret = 0; >> u32 fifo_size; >> int init_slots = 0; >> >> - if (!host->pdata || !host->pdata->init) { >> - dev_err(host->dev, >> - "Platform data must supply init function\n"); >> - return -ENODEV; >> + if (!host->pdata) { >> + host->pdata = dw_mci_parse_dt(host); >> + if (IS_ERR(host->pdata)) { >> + dev_err(host->dev, "platform data not available\n"); >> + return -EINVAL; >> + } >> } >> >> if (!host->pdata->select_slot && host->pdata->num_slots > 1) { >> diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h >> index 15c27e1..1ecaa02 100644 >> --- a/drivers/mmc/host/dw_mmc.h >> +++ b/drivers/mmc/host/dw_mmc.h >> @@ -182,4 +182,13 @@ extern int dw_mci_suspend(struct dw_mci *host); >> extern int dw_mci_resume(struct dw_mci *host); >> #endif >> >> +/* Variations in the dw_mci controller */ >> +#define DW_MCI_TYPE_SYNOPSIS 0 >> + >> +/* dw_mci platform driver data */ >> +struct dw_mci_drv_data { >> + unsigned long ctrl_type; >> + unsigned long *caps; >> +}; >> + >> #endif /* _DW_MMC_H_ */ >> diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h >> index b72e4aa..ae45e4f 100644 >> --- a/include/linux/mmc/dw_mmc.h >> +++ b/include/linux/mmc/dw_mmc.h >> @@ -78,6 +78,7 @@ struct mmc_data; >> * @data_offset: Set the offset of DATA register according to VERID. >> * @dev: Device associated with the MMC controller. >> * @pdata: Platform data associated with the MMC controller. >> + * @drv_data: Driver specific data for identified variant of the controller >> * @biu_clk: Pointer to bus interface unit clock instance. >> * @ciu_clk: Pointer to card interface unit clock instance. >> * @slot: Slots sharing this MMC controller. >> @@ -160,6 +161,7 @@ struct dw_mci { >> u16 data_offset; >> struct device *dev; >> struct dw_mci_board *pdata; >> + struct dw_mci_drv_data *drv_data; >> struct clk *biu_clk; >> struct clk *ciu_clk; >> struct dw_mci_slot *slot[MAX_MCI_SLOTS]; >> -- >> 1.6.6.rc2 >> >> -- >> To unsubscribe from this list: send the line "unsubscribe linux-mmc" in >> the body of a message to majordomo@vger.kernel.org >> More majordomo info at http://vger.kernel.org/majordomo-info.html
On 16 July 2012 09:45, Girish K S <girish.shivananjappa@linaro.org> wrote: > On 12 July 2012 18:24, Thomas Abraham <thomas.abraham@linaro.org> wrote: [...] >> >> +#ifdef CONFIG_OF >> +static struct dw_mci_drv_data synopsis_drv_data = { >> + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, >> +}; >> + >> +static const struct of_device_id dw_mci_pltfm_match[] = { >> + { .compatible = "snps,dw-mshc", >> + .data = (void *)&synopsis_drv_data, }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); >> +#else >> +static const struct of_device_id dw_mci_pltfm_match[]; > the #else and a statement can be completely removed if of_match_ptr is > used while accessing the dw_mci_pltfm_match in of_match_node function. >> +#endif >> + >> static int dw_mci_pltfm_probe(struct platform_device *pdev) >> { >> struct dw_mci *host; >> @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device *pdev) >> if (!host->regs) >> goto err_free; >> platform_set_drvdata(pdev, host); >> + >> + if (pdev->dev.of_node) { >> + const struct of_device_id *match; >> + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); > can be modified to of_match_node(of_match_pt(dw_mci_pltfm_match), > pdev->dev.of_node); > This will remove the dummy allocation of variable as mentioned above. > Also it will be generic in non dt case. Ok. Thanks for the suggestion. I will modify it as per your suggestion. Thanks, Thomas. [...]
On 16 July 2012 09:53, Chris Ball <cjb@laptop.org> wrote: > Hi, > > On Thu, Jul 12 2012, Thomas Abraham wrote: >> diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt >> new file mode 100644 >> index 0000000..3acd6c9 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt >> @@ -0,0 +1,108 @@ >> +* Synopsis Designware Mobile Storage Host Controller >> + >> +The Synopsis designware mobile storage host controller is used to interface >> +a SoC with storage medium such as eMMC or SD/MMC cards. >> + >> +Required Properties: >> + >> +* compatible: should be one of the following >> + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. >> + >> +* reg: physical base address of the dw-mshc controller and size of its memory >> + region. >> + >> +* interrupts: interrupt specifier for the controller. The format and value of >> + the interrupt specifier depends on the interrupt parent for the controller. > > Please instead add: > > This file documents differences between the core properties described > by mmc.txt and the properties used by the dw_mmc driver. > > mmc.txt already describes compatible, reg, interrupts, bus-width, > cd-gpios, and wp-gpios, so you don't need to describe those again. Ok. I will change it. > >> + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); >> + for (idx = 0; idx < cnt; idx++) >> + if (of_get_property(np, of_quriks[idx].quirk, NULL)) >> + pdata->quirks |= of_quriks[idx].id; > > of_quirks, not of_quriks. Yes, thanks for pointing this out. I will fix this. Thanks, Thomas.
diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt new file mode 100644 index 0000000..3acd6c9 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt @@ -0,0 +1,108 @@ +* Synopsis Designware Mobile Storage Host Controller + +The Synopsis designware mobile storage host controller is used to interface +a SoC with storage medium such as eMMC or SD/MMC cards. + +Required Properties: + +* compatible: should be one of the following + - snps,dw-mshc: for controllers compliant with synopsis dw-mshc. + +* reg: physical base address of the dw-mshc controller and size of its memory + region. + +* interrupts: interrupt specifier for the controller. The format and value of + the interrupt specifier depends on the interrupt parent for the controller. + +* #address-cells: should be 1. + +* #size-cells: should be 0. + +# Slots: The slot specific information are contained within child-nodes with + each child-node representing a supported slot. There should be atleast one + child node representing a card slot. The name of the child node representing + the slot is recommended to be slot@n where n is the unique number of the slot + connnected to the controller. The following are optional properties which + can be included in the slot child node. + + * reg: specifies the physical slot number. The valid values of this + property is 0 to (num-slots -1), where num-slots is the value + specified by the num-slots property. + + * bus-width: specifies the width of the data bus connected from the + controller to the card slot. The value should be 1, 4 or 8. In case + this property is not specified, a default value of 1 is assumed for + this property. + + * cd-gpios: specifies the card detect gpio line. The format of the + gpio specifier depends on the gpio controller. + + * wp-gpios: specifies the write protect gpio line. The format of the + gpio specifier depends on the gpio controller. + + * gpios: specifies a list of gpios used for command, clock and data + bus. The first gpio is the command line and the second gpio is the + clock line. The rest of the gpios (depending on the bus-width + property) are the data lines in no particular order. The format of + the gpio specifier depends on the gpio controller. + +Optional properties: + +* num-slots: specifies the number of slots supported by the controller. + The number of physical slots actually used could be equal or less than the + value specified by num-slots. If this property is not specified, the value + of num-slot property is assumed to be 1. + +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not + specified, the default value of the fifo size is determined from the + controller registers. + +* card-detect-delay: Delay in milli-seconds before detecting card after card + insert event. The default value is 0. + +* supports-highspeed: Enables support for high speed cards (upto 50MHz) + +* card-detection-broken: The card detection functionality is not available on + any of the slots. + +* no-write-protect: The write protect pad of the controller is not connected + to the write protect pin on the slot. + +Aliases: + +- All the MSHC controller nodes should be represented in the aliases node using + the following format 'mshc{n}' where n is a unique number for the alias. + + +Example: + + The MSHC controller node can be split into two portions, SoC specific and + board specific portions as listed below. + + dwmmc0@12200000 { + compatible = "snps,dw-mshc"; + reg = <0x12200000 0x1000>; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + }; + + dwmmc0@12200000 { + num-slots = <1>; + supports-highspeed; + card-detection-broken; + no-write-protect; + fifo-depth = <0x80>; + card-detect-delay = <200>; + + slot@0 { + reg = <0>; + bus-width = <8>; + cd-gpios = <&gpc0 2 2 3 3>; + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; + }; + }; diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index 9a63299..8d24f6d 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -19,8 +19,24 @@ #include <linux/mmc/host.h> #include <linux/mmc/mmc.h> #include <linux/mmc/dw_mmc.h> +#include <linux/of.h> #include "dw_mmc.h" +#ifdef CONFIG_OF +static struct dw_mci_drv_data synopsis_drv_data = { + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, +}; + +static const struct of_device_id dw_mci_pltfm_match[] = { + { .compatible = "snps,dw-mshc", + .data = (void *)&synopsis_drv_data, }, + {}, +}; +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); +#else +static const struct of_device_id dw_mci_pltfm_match[]; +#endif + static int dw_mci_pltfm_probe(struct platform_device *pdev) { struct dw_mci *host; @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device *pdev) if (!host->regs) goto err_free; platform_set_drvdata(pdev, host); + + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); + host->drv_data = match->data; + } + ret = dw_mci_probe(host); if (ret) goto err_out; @@ -111,6 +134,7 @@ static struct platform_driver dw_mci_pltfm_driver = { .remove = __exit_p(dw_mci_pltfm_remove), .driver = { .name = "dw_mmc", + .of_match_table = of_match_ptr(dw_mci_pltfm_match), .pm = &dw_mci_pltfm_pmops, }, }; diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 075f89d..3bc276d 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -33,9 +33,13 @@ #include <linux/bitops.h> #include <linux/regulator/consumer.h> #include <linux/workqueue.h> +#include <linux/of.h> +#include <linux/of_gpio.h> #include "dw_mmc.h" +#define NUM_PINS(x) (x + 2) + /* Common flag combinations */ #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ SDMMC_INT_HTO | SDMMC_INT_SBE | \ @@ -86,6 +90,8 @@ struct idmac_desc { struct dw_mci_slot { struct mmc_host *mmc; struct dw_mci *host; + int wp_gpio; + int cd_gpio; u32 ctype; @@ -1762,10 +1768,106 @@ static void dw_mci_work_routine_card(struct work_struct *work) } } +#ifdef CONFIG_OF +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot) +{ + struct device_node *np; + const __be32 *addr; + int len; + + if (!dev || !dev->of_node) + return NULL; + + for_each_child_of_node(dev->of_node, np) { + addr = of_get_property(np, "reg", &len); + if (!addr || (len < sizeof(int))) + continue; + if (be32_to_cpup(addr) == slot) + return np; + } + return NULL; +} + +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); + u32 bus_wd = 1; + + if (!np) + return 1; + + if (of_property_read_u32(np, "bus-width", &bus_wd)) + dev_err(dev, "bus-width property not found, assuming width" + " as 1\n"); + return bus_wd; +} + +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) +{ + struct device_node *np = dw_mci_of_find_slot_node(host->dev, slot); + int idx, gpio, ret; + + if (!np) + return -EINVAL; + + for (idx = 0; idx < NUM_PINS(bus_wd); idx++) { + gpio = of_get_gpio(np, idx); + if (!gpio_is_valid(gpio)) { + dev_err(host->dev, "invalid gpio: %d\n", gpio); + return -EINVAL; + } + + ret = devm_gpio_request(host->dev, gpio, "dw-mci-bus"); + if (ret) { + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + return -EBUSY; + } + } + + host->slot[slot]->wp_gpio = -1; + gpio = of_get_named_gpio(np, "wp-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_info(host->dev, "wp gpio not available"); + } else { + ret = devm_gpio_request(host->dev, gpio, "dw-mci-wp"); + if (ret) + dev_info(host->dev, "gpio [%d] request failed\n", + gpio); + else + host->slot[slot]->wp_gpio = gpio; + } + + host->slot[slot]->cd_gpio = -1; + gpio = of_get_named_gpio(np, "cd-gpios", 0); + if (!gpio_is_valid(gpio)) { + dev_info(host->dev, "cd gpio not available"); + } else { + ret = devm_gpio_request(host->dev, gpio, "dw-mci-cd"); + if (ret) + dev_err(host->dev, "gpio [%d] request failed\n", gpio); + else + host->slot[slot]->cd_gpio = gpio; + } + + return 0; +} +#else /* CONFIG_OF */ +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) +{ + return 1; +} + +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) +{ + return -EINVAL; +} +#endif /* CONFIG_OF */ + static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) { struct mmc_host *mmc; struct dw_mci_slot *slot; + int ctrl_id, ret; mmc = mmc_alloc_host(sizeof(struct dw_mci_slot), host->dev); if (!mmc) @@ -1775,6 +1877,7 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) slot->id = id; slot->mmc = mmc; slot->host = host; + host->slot[id] = slot; mmc->ops = &dw_mci_ops; mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); @@ -1795,12 +1898,33 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) if (host->pdata->caps) mmc->caps = host->pdata->caps; + if (host->dev->of_node) { + ctrl_id = of_alias_get_id(host->dev->of_node, "mshc"); + if (ctrl_id < 0) + ctrl_id = 0; + } + if (host->drv_data->caps) + mmc->caps |= host->drv_data->caps[ctrl_id]; + if (host->pdata->caps2) mmc->caps2 = host->pdata->caps2; - if (host->pdata->get_bus_wd) + if (host->pdata->get_bus_wd) { if (host->pdata->get_bus_wd(slot->id) >= 4) mmc->caps |= MMC_CAP_4_BIT_DATA; + } else if (host->dev->of_node) { + unsigned int bus_width; + bus_width = dw_mci_of_get_bus_wd(host->dev, slot->id); + switch (bus_width) { + case 8: + mmc->caps |= MMC_CAP_8_BIT_DATA; + case 4: + mmc->caps |= MMC_CAP_4_BIT_DATA; + } + ret = dw_mci_of_setup_bus(host, slot->id, bus_width); + if (ret) + goto err_setup_bus; + } if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; @@ -1845,7 +1969,6 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) else clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); - host->slot[id] = slot; mmc_add_host(mmc); #if defined(CONFIG_DEBUG_FS) @@ -1862,6 +1985,10 @@ static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) queue_work(host->card_workqueue, &host->card_work); return 0; + +err_setup_bus: + mmc_free_host(mmc); + return -EINVAL; } static void dw_mci_cleanup_slot(struct dw_mci_slot *slot, unsigned int id) @@ -1937,16 +2064,78 @@ static bool mci_wait_reset(struct device *dev, struct dw_mci *host) return false; } +#ifdef CONFIG_OF +static struct dw_mci_of_quirks { + char *quirk; + int id; +} of_quriks[] = { + { + .quirk = "supports-highspeed", + .id = DW_MCI_QUIRK_HIGHSPEED, + }, { + .quirk = "card-detection-broken", + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, + }, { + .quirk = "no-write-protect", + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, + } +}; + +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + struct dw_mci_board *pdata; + struct device *dev = host->dev; + struct device_node *np = dev->of_node; + int idx, cnt; + + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) { + dev_err(dev, "could not allocate memory for pdata\n"); + return ERR_PTR(-ENOMEM); + } + + /* find out number of slots supported */ + if (of_property_read_u32(dev->of_node, "num-slots", + &pdata->num_slots)) { + dev_info(dev, "num-slots property not found, " + "assuming 1 slot is available\n"); + pdata->num_slots = 1; + } + + /* get quirks */ + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); + for (idx = 0; idx < cnt; idx++) + if (of_get_property(np, of_quriks[idx].quirk, NULL)) + pdata->quirks |= of_quriks[idx].id; + + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) + dev_info(dev, "fifo-depth property not found, using " + "value of FIFOTH register as default\n"); + + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); + + return pdata; +} + +#else /* CONFIG_OF */ +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) +{ + return ERR_PTR(-EINVAL); +} +#endif /* CONFIG_OF */ + int dw_mci_probe(struct dw_mci *host) { int width, i, ret = 0; u32 fifo_size; int init_slots = 0; - if (!host->pdata || !host->pdata->init) { - dev_err(host->dev, - "Platform data must supply init function\n"); - return -ENODEV; + if (!host->pdata) { + host->pdata = dw_mci_parse_dt(host); + if (IS_ERR(host->pdata)) { + dev_err(host->dev, "platform data not available\n"); + return -EINVAL; + } } if (!host->pdata->select_slot && host->pdata->num_slots > 1) { diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h index 15c27e1..1ecaa02 100644 --- a/drivers/mmc/host/dw_mmc.h +++ b/drivers/mmc/host/dw_mmc.h @@ -182,4 +182,13 @@ extern int dw_mci_suspend(struct dw_mci *host); extern int dw_mci_resume(struct dw_mci *host); #endif +/* Variations in the dw_mci controller */ +#define DW_MCI_TYPE_SYNOPSIS 0 + +/* dw_mci platform driver data */ +struct dw_mci_drv_data { + unsigned long ctrl_type; + unsigned long *caps; +}; + #endif /* _DW_MMC_H_ */ diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h index b72e4aa..ae45e4f 100644 --- a/include/linux/mmc/dw_mmc.h +++ b/include/linux/mmc/dw_mmc.h @@ -78,6 +78,7 @@ struct mmc_data; * @data_offset: Set the offset of DATA register according to VERID. * @dev: Device associated with the MMC controller. * @pdata: Platform data associated with the MMC controller. + * @drv_data: Driver specific data for identified variant of the controller * @biu_clk: Pointer to bus interface unit clock instance. * @ciu_clk: Pointer to card interface unit clock instance. * @slot: Slots sharing this MMC controller. @@ -160,6 +161,7 @@ struct dw_mci { u16 data_offset; struct device *dev; struct dw_mci_board *pdata; + struct dw_mci_drv_data *drv_data; struct clk *biu_clk; struct clk *ciu_clk; struct dw_mci_slot *slot[MAX_MCI_SLOTS];
Add device tree based discovery support. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> --- .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 108 +++++++++++ drivers/mmc/host/dw_mmc-pltfm.c | 24 +++ drivers/mmc/host/dw_mmc.c | 201 +++++++++++++++++++- drivers/mmc/host/dw_mmc.h | 9 + include/linux/mmc/dw_mmc.h | 2 + 5 files changed, 338 insertions(+), 6 deletions(-) create mode 100644 Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt