Message ID | PH7PR07MB95382F640BC61712E986895BDD9D2@PH7PR07MB9538.namprd07.prod.outlook.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | usb: cdnsp: Fix incorrect usb_request status | expand |
On 24-09-05 07:31:10, Pawel Laszczak wrote: > Fix changes incorrect usb_request->status returned during disabling > endpoints. Before fix the status returned during dequeuing requests > while disabling endpoint was ECONNRESET. > Patch changes it to ESHUTDOWN. Would you please explain why we need this change? Peter > > Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") > cc: stable@vger.kernel.org > Signed-off-by: Pawel Laszczak <pawell@cadence.com> > --- > drivers/usb/cdns3/cdnsp-ring.c | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c > index 1e011560e3ae..bccc8fc143d0 100644 > --- a/drivers/usb/cdns3/cdnsp-ring.c > +++ b/drivers/usb/cdns3/cdnsp-ring.c > @@ -718,7 +718,8 @@ int cdnsp_remove_request(struct cdnsp_device *pdev, > seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb, > cur_td->last_trb, hw_deq); > > - if (seg && (pep->ep_state & EP_ENABLED)) > + if (seg && (pep->ep_state & EP_ENABLED) && > + !(pep->ep_state & EP_DIS_IN_RROGRESS)) > cdnsp_find_new_dequeue_state(pdev, pep, preq->request.stream_id, > cur_td, &deq_state); > else > @@ -736,7 +737,8 @@ int cdnsp_remove_request(struct cdnsp_device *pdev, > * During disconnecting all endpoint will be disabled so we don't > * have to worry about updating dequeue pointer. > */ > - if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) { > + if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING || > + pep->ep_state & EP_DIS_IN_RROGRESS) { > status = -ESHUTDOWN; > ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state); > } > -- > 2.43.0 >
> >On 24-09-05 07:31:10, Pawel Laszczak wrote: >> Fix changes incorrect usb_request->status returned during disabling >> endpoints. Before fix the status returned during dequeuing requests >> while disabling endpoint was ECONNRESET. >> Patch changes it to ESHUTDOWN. > >Would you please explain why we need this change? This patch is needed for UVC gadget. During stopping streaming the class starts dequeuing usb requests and controller driver returns the -ECONNRESET status. After completion requests the class or application "uvc-gadget" try to queue this request again. Changing this status to ESHUTDOWN cause that UVC assume that endpoint is disabled, or device is disconnected and stop re-queuing usb requests. Thanks, Pawel > >Peter > >> >> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence >> USBSSP DRD Driver") >> cc: stable@vger.kernel.org >> Signed-off-by: Pawel Laszczak <pawell@cadence.com> >> --- >> drivers/usb/cdns3/cdnsp-ring.c | 6 ++++-- >> 1 file changed, 4 insertions(+), 2 deletions(-) >> >> diff --git a/drivers/usb/cdns3/cdnsp-ring.c >> b/drivers/usb/cdns3/cdnsp-ring.c index 1e011560e3ae..bccc8fc143d0 >> 100644 >> --- a/drivers/usb/cdns3/cdnsp-ring.c >> +++ b/drivers/usb/cdns3/cdnsp-ring.c >> @@ -718,7 +718,8 @@ int cdnsp_remove_request(struct cdnsp_device >*pdev, >> seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb, >> cur_td->last_trb, hw_deq); >> >> - if (seg && (pep->ep_state & EP_ENABLED)) >> + if (seg && (pep->ep_state & EP_ENABLED) && >> + !(pep->ep_state & EP_DIS_IN_RROGRESS)) >> cdnsp_find_new_dequeue_state(pdev, pep, preq- >>request.stream_id, >> cur_td, &deq_state); >> else >> @@ -736,7 +737,8 @@ int cdnsp_remove_request(struct cdnsp_device >*pdev, >> * During disconnecting all endpoint will be disabled so we don't >> * have to worry about updating dequeue pointer. >> */ >> - if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) { >> + if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING || >> + pep->ep_state & EP_DIS_IN_RROGRESS) { >> status = -ESHUTDOWN; >> ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state); >> } >> -- >> 2.43.0 >>
On 24-09-05 08:45:59, Pawel Laszczak wrote: > > > >On 24-09-05 07:31:10, Pawel Laszczak wrote: > >> Fix changes incorrect usb_request->status returned during disabling > >> endpoints. Before fix the status returned during dequeuing requests > >> while disabling endpoint was ECONNRESET. > >> Patch changes it to ESHUTDOWN. > > > >Would you please explain why we need this change? > > This patch is needed for UVC gadget. > During stopping streaming the class starts dequeuing usb requests and > controller driver returns the -ECONNRESET status. After completion > requests the class or application "uvc-gadget" try to queue this > request again. Changing this status to ESHUTDOWN cause that UVC > assume that endpoint is disabled, or device is disconnected and > stop re-queuing usb requests. > Get it. Would you please update commit message with your above explanation? Peter > > > >> > >> Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence > >> USBSSP DRD Driver") > >> cc: stable@vger.kernel.org > >> Signed-off-by: Pawel Laszczak <pawell@cadence.com> > >> --- > >> drivers/usb/cdns3/cdnsp-ring.c | 6 ++++-- > >> 1 file changed, 4 insertions(+), 2 deletions(-) > >> > >> diff --git a/drivers/usb/cdns3/cdnsp-ring.c > >> b/drivers/usb/cdns3/cdnsp-ring.c index 1e011560e3ae..bccc8fc143d0 > >> 100644 > >> --- a/drivers/usb/cdns3/cdnsp-ring.c > >> +++ b/drivers/usb/cdns3/cdnsp-ring.c > >> @@ -718,7 +718,8 @@ int cdnsp_remove_request(struct cdnsp_device > >*pdev, > >> seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb, > >> cur_td->last_trb, hw_deq); > >> > >> - if (seg && (pep->ep_state & EP_ENABLED)) > >> + if (seg && (pep->ep_state & EP_ENABLED) && > >> + !(pep->ep_state & EP_DIS_IN_RROGRESS)) > >> cdnsp_find_new_dequeue_state(pdev, pep, preq- > >>request.stream_id, > >> cur_td, &deq_state); > >> else > >> @@ -736,7 +737,8 @@ int cdnsp_remove_request(struct cdnsp_device > >*pdev, > >> * During disconnecting all endpoint will be disabled so we don't > >> * have to worry about updating dequeue pointer. > >> */ > >> - if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) { > >> + if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING || > >> + pep->ep_state & EP_DIS_IN_RROGRESS) { > >> status = -ESHUTDOWN; > >> ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state); > >> } > >> -- > >> 2.43.0 > >>
diff --git a/drivers/usb/cdns3/cdnsp-ring.c b/drivers/usb/cdns3/cdnsp-ring.c index 1e011560e3ae..bccc8fc143d0 100644 --- a/drivers/usb/cdns3/cdnsp-ring.c +++ b/drivers/usb/cdns3/cdnsp-ring.c @@ -718,7 +718,8 @@ int cdnsp_remove_request(struct cdnsp_device *pdev, seg = cdnsp_trb_in_td(pdev, cur_td->start_seg, cur_td->first_trb, cur_td->last_trb, hw_deq); - if (seg && (pep->ep_state & EP_ENABLED)) + if (seg && (pep->ep_state & EP_ENABLED) && + !(pep->ep_state & EP_DIS_IN_RROGRESS)) cdnsp_find_new_dequeue_state(pdev, pep, preq->request.stream_id, cur_td, &deq_state); else @@ -736,7 +737,8 @@ int cdnsp_remove_request(struct cdnsp_device *pdev, * During disconnecting all endpoint will be disabled so we don't * have to worry about updating dequeue pointer. */ - if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING) { + if (pdev->cdnsp_state & CDNSP_STATE_DISCONNECT_PENDING || + pep->ep_state & EP_DIS_IN_RROGRESS) { status = -ESHUTDOWN; ret = cdnsp_cmd_set_deq(pdev, pep, &deq_state); }
Fix changes incorrect usb_request->status returned during disabling endpoints. Before fix the status returned during dequeuing requests while disabling endpoint was ECONNRESET. Patch changes it to ESHUTDOWN. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: stable@vger.kernel.org Signed-off-by: Pawel Laszczak <pawell@cadence.com> --- drivers/usb/cdns3/cdnsp-ring.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-)