| Message ID | 20240904123607.3407364-16-lizetao1@huawei.com (mailing list archive) |
|---|---|
| State | Changes Requested |
| Headers | show |
| Series | HID: convert to devm_hid_hw_start_and_open() | expand |
On Wed, 4 Sep 2024 20:36:03 +0800 Li Zetao <lizetao1@huawei.com> wrote: > Currently, the corsair-psu module needs to maintain hid resources > by itself. Consider using devm_hid_hw_start_and_open helper to ensure > that hid resources are consistent with the device life cycle, and release > hid resources before device is released. At the same time, it can avoid > the goto-release encoding, drop the fail_and_close and fail_and_stop > lables, and directly return the error code when an error occurs. > > Signed-off-by: Li Zetao <lizetao1@huawei.com> > --- > drivers/hwmon/corsair-psu.c | 24 +++++------------------- > 1 file changed, 5 insertions(+), 19 deletions(-) > > diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c > index f8f22b8a67cd..b574ec9cd00f 100644 > --- a/drivers/hwmon/corsair-psu.c > +++ b/drivers/hwmon/corsair-psu.c > @@ -787,14 +787,10 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct > hid_device_id if (ret) > return ret; > > - ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); > + ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW); > if (ret) > return ret; > > - ret = hid_hw_open(hdev); > - if (ret) > - goto fail_and_stop; > - > priv->hdev = hdev; > hid_set_drvdata(hdev, priv); > mutex_init(&priv->lock); > @@ -805,13 +801,13 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct > hid_device_id ret = corsairpsu_init(priv); > if (ret < 0) { > dev_err(&hdev->dev, "unable to initialize device (%d)\n", ret); > - goto fail_and_stop; > + return ret; > } > > ret = corsairpsu_fwinfo(priv); > if (ret < 0) { > dev_err(&hdev->dev, "unable to query firmware (%d)\n", ret); > - goto fail_and_stop; > + return ret; > } > > corsairpsu_get_criticals(priv); > @@ -820,20 +816,12 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct > hid_device_id priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsairpsu", priv, > &corsairpsu_chip_info, NULL); > > - if (IS_ERR(priv->hwmon_dev)) { > - ret = PTR_ERR(priv->hwmon_dev); > - goto fail_and_close; > - } > + if (IS_ERR(priv->hwmon_dev)) > + return PTR_ERR(priv->hwmon_dev); > > corsairpsu_debugfs_init(priv); > > return 0; > - > -fail_and_close: > - hid_hw_close(hdev); > -fail_and_stop: > - hid_hw_stop(hdev); > - return ret; > } > > static void corsairpsu_remove(struct hid_device *hdev) > @@ -842,8 +830,6 @@ static void corsairpsu_remove(struct hid_device *hdev) > > debugfs_remove_recursive(priv->debugfs); > hwmon_device_unregister(priv->hwmon_dev); > - hid_hw_close(hdev); > - hid_hw_stop(hdev); > } > > static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data, So far looks fine to me. Reviewed-by: Wilken Gottwalt <wilken.gottwalt@posteo.net> greetings, Wilken
diff --git a/drivers/hwmon/corsair-psu.c b/drivers/hwmon/corsair-psu.c index f8f22b8a67cd..b574ec9cd00f 100644 --- a/drivers/hwmon/corsair-psu.c +++ b/drivers/hwmon/corsair-psu.c @@ -787,14 +787,10 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id if (ret) return ret; - ret = hid_hw_start(hdev, HID_CONNECT_HIDRAW); + ret = devm_hid_hw_start_and_open(hdev, HID_CONNECT_HIDRAW); if (ret) return ret; - ret = hid_hw_open(hdev); - if (ret) - goto fail_and_stop; - priv->hdev = hdev; hid_set_drvdata(hdev, priv); mutex_init(&priv->lock); @@ -805,13 +801,13 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id ret = corsairpsu_init(priv); if (ret < 0) { dev_err(&hdev->dev, "unable to initialize device (%d)\n", ret); - goto fail_and_stop; + return ret; } ret = corsairpsu_fwinfo(priv); if (ret < 0) { dev_err(&hdev->dev, "unable to query firmware (%d)\n", ret); - goto fail_and_stop; + return ret; } corsairpsu_get_criticals(priv); @@ -820,20 +816,12 @@ static int corsairpsu_probe(struct hid_device *hdev, const struct hid_device_id priv->hwmon_dev = hwmon_device_register_with_info(&hdev->dev, "corsairpsu", priv, &corsairpsu_chip_info, NULL); - if (IS_ERR(priv->hwmon_dev)) { - ret = PTR_ERR(priv->hwmon_dev); - goto fail_and_close; - } + if (IS_ERR(priv->hwmon_dev)) + return PTR_ERR(priv->hwmon_dev); corsairpsu_debugfs_init(priv); return 0; - -fail_and_close: - hid_hw_close(hdev); -fail_and_stop: - hid_hw_stop(hdev); - return ret; } static void corsairpsu_remove(struct hid_device *hdev) @@ -842,8 +830,6 @@ static void corsairpsu_remove(struct hid_device *hdev) debugfs_remove_recursive(priv->debugfs); hwmon_device_unregister(priv->hwmon_dev); - hid_hw_close(hdev); - hid_hw_stop(hdev); } static int corsairpsu_raw_event(struct hid_device *hdev, struct hid_report *report, u8 *data,
Currently, the corsair-psu module needs to maintain hid resources by itself. Consider using devm_hid_hw_start_and_open helper to ensure that hid resources are consistent with the device life cycle, and release hid resources before device is released. At the same time, it can avoid the goto-release encoding, drop the fail_and_close and fail_and_stop lables, and directly return the error code when an error occurs. Signed-off-by: Li Zetao <lizetao1@huawei.com> --- drivers/hwmon/corsair-psu.c | 24 +++++------------------- 1 file changed, 5 insertions(+), 19 deletions(-)