diff mbox series

[1/4] clk: meson: Support PLL with fixed fractional denominators

Message ID 20240906-fix_clk-v1-1-2977ef0d72e7@amlogic.com (mailing list archive)
State Changes Requested, archived
Headers show
Series clk: meson: Fix an issue with inaccurate hifi_pll frequency | expand

Commit Message

Chuan Liu via B4 Relay Sept. 6, 2024, 5:52 a.m. UTC 
From: Chuan Liu <chuan.liu@amlogic.com>

Some PLLs with fractional multipliers have fractional denominators that
are fixed to "100000" instead of the previous "(1 << pll->frac.width)".

Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
---
 drivers/clk/meson/clk-pll.c | 22 +++++++++++++++++++---
 drivers/clk/meson/clk-pll.h |  1 +
 2 files changed, 20 insertions(+), 3 deletions(-)

Comments

Jerome Brunet Sept. 6, 2024, 6:51 a.m. UTC | #1 
On Fri 06 Sep 2024 at 13:52, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote:

> From: Chuan Liu <chuan.liu@amlogic.com>
>
> Some PLLs with fractional multipliers have fractional denominators that
> are fixed to "100000" instead of the previous "(1 << pll->frac.width)".
>
> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
> ---
>  drivers/clk/meson/clk-pll.c | 22 +++++++++++++++++++---
>  drivers/clk/meson/clk-pll.h |  1 +
>  2 files changed, 20 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
> index bc570a2ff3a3..f0009c174564 100644
> --- a/drivers/clk/meson/clk-pll.c
> +++ b/drivers/clk/meson/clk-pll.c
> @@ -36,6 +36,12 @@
>  #include "clk-regmap.h"
>  #include "clk-pll.h"
>  
> +/*
> + * Some PLLs with fractional multipliers have fractional denominators that
> + * are fixed to "100000" instead of the previous "(1 << pll->frac.width)".
> + */
> +#define FIXED_FRAC_MAX			100000

When the next arbitrary limit comes around, this will get very ugly.
Instead, please add frac_max to the pll parameter

> +
>  static inline struct meson_clk_pll_data *
>  meson_clk_pll_data(struct clk_regmap *clk)
>  {
> @@ -57,12 +63,17 @@ static unsigned long __pll_params_to_rate(unsigned long parent_rate,
>  					  struct meson_clk_pll_data *pll)
>  {
>  	u64 rate = (u64)parent_rate * m;
> +	unsigned int frac_max;
>  
>  	if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
>  		u64 frac_rate = (u64)parent_rate * frac;
>  
> -		rate += DIV_ROUND_UP_ULL(frac_rate,
> -					 (1 << pll->frac.width));
> +		if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)
> +			frac_max = FIXED_FRAC_MAX;
> +		else
> +			frac_max = (1 << pll->frac.width);
> +
> +		rate += DIV_ROUND_UP_ULL(frac_rate, frac_max);
>  	}
>  
>  	return DIV_ROUND_UP_ULL(rate, n);
> @@ -100,13 +111,18 @@ static unsigned int __pll_params_with_frac(unsigned long rate,
>  					   unsigned int n,
>  					   struct meson_clk_pll_data *pll)
>  {
> -	unsigned int frac_max = (1 << pll->frac.width);
> +	unsigned int frac_max;
>  	u64 val = (u64)rate * n;
>  
>  	/* Bail out if we are already over the requested rate */
>  	if (rate < parent_rate * m / n)
>  		return 0;
>  
> +	if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)

Certainly don't need a flag for that. Use a parameter and default to (1
<< pll->frac.width) if unset.

> +		frac_max = FIXED_FRAC_MAX;
> +	else
> +		frac_max = (1 << pll->frac.width);
> +
>  	if (pll->flags & CLK_MESON_PLL_ROUND_CLOSEST)
>  		val = DIV_ROUND_CLOSEST_ULL(val * frac_max, parent_rate);
>  	else
> diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
> index 7b6b87274073..e996d3727eb1 100644
> --- a/drivers/clk/meson/clk-pll.h
> +++ b/drivers/clk/meson/clk-pll.h
> @@ -29,6 +29,7 @@ struct pll_mult_range {
>  
>  #define CLK_MESON_PLL_ROUND_CLOSEST	BIT(0)
>  #define CLK_MESON_PLL_NOINIT_ENABLED	BIT(1)
> +#define CLK_MESON_PLL_FIXED_FRAC_MAX	BIT(2)

Remove this.

>  
>  struct meson_clk_pll_data {
>  	struct parm en;
Chuan Liu Sept. 6, 2024, 8:24 a.m. UTC | #2 
On 2024/9/6 14:51, Jerome Brunet wrote:
> [ EXTERNAL EMAIL ]
>
> On Fri 06 Sep 2024 at 13:52, Chuan Liu via B4 Relay <devnull+chuan.liu.amlogic.com@kernel.org> wrote:
>
>> From: Chuan Liu <chuan.liu@amlogic.com>
>>
>> Some PLLs with fractional multipliers have fractional denominators that
>> are fixed to "100000" instead of the previous "(1 << pll->frac.width)".
>>
>> Signed-off-by: Chuan Liu <chuan.liu@amlogic.com>
>> ---
>>   drivers/clk/meson/clk-pll.c | 22 +++++++++++++++++++---
>>   drivers/clk/meson/clk-pll.h |  1 +
>>   2 files changed, 20 insertions(+), 3 deletions(-)
>>
>> diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
>> index bc570a2ff3a3..f0009c174564 100644
>> --- a/drivers/clk/meson/clk-pll.c
>> +++ b/drivers/clk/meson/clk-pll.c
>> @@ -36,6 +36,12 @@
>>   #include "clk-regmap.h"
>>   #include "clk-pll.h"
>>
>> +/*
>> + * Some PLLs with fractional multipliers have fractional denominators that
>> + * are fixed to "100000" instead of the previous "(1 << pll->frac.width)".
>> + */
>> +#define FIXED_FRAC_MAX                       100000
> When the next arbitrary limit comes around, this will get very ugly.
> Instead, please add frac_max to the pll parameter


I also had this consideration before, and after confirmation, the
hifi_pll of the subsequent chip design will continue to be this value,
and the hifi_pll of the chip in recent years is also this value. So
let's define it here.

In the next version I replaced it with a member inside the structure
member of meson_clk_pll_data.


>
>> +
>>   static inline struct meson_clk_pll_data *
>>   meson_clk_pll_data(struct clk_regmap *clk)
>>   {
>> @@ -57,12 +63,17 @@ static unsigned long __pll_params_to_rate(unsigned long parent_rate,
>>                                          struct meson_clk_pll_data *pll)
>>   {
>>        u64 rate = (u64)parent_rate * m;
>> +     unsigned int frac_max;
>>
>>        if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
>>                u64 frac_rate = (u64)parent_rate * frac;
>>
>> -             rate += DIV_ROUND_UP_ULL(frac_rate,
>> -                                      (1 << pll->frac.width));
>> +             if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)
>> +                     frac_max = FIXED_FRAC_MAX;
>> +             else
>> +                     frac_max = (1 << pll->frac.width);
>> +
>> +             rate += DIV_ROUND_UP_ULL(frac_rate, frac_max);
>>        }
>>
>>        return DIV_ROUND_UP_ULL(rate, n);
>> @@ -100,13 +111,18 @@ static unsigned int __pll_params_with_frac(unsigned long rate,
>>                                           unsigned int n,
>>                                           struct meson_clk_pll_data *pll)
>>   {
>> -     unsigned int frac_max = (1 << pll->frac.width);
>> +     unsigned int frac_max;
>>        u64 val = (u64)rate * n;
>>
>>        /* Bail out if we are already over the requested rate */
>>        if (rate < parent_rate * m / n)
>>                return 0;
>>
>> +     if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)
> Certainly don't need a flag for that. Use a parameter and default to (1
> << pll->frac.width) if unset.
Okay
>
>> +             frac_max = FIXED_FRAC_MAX;
>> +     else
>> +             frac_max = (1 << pll->frac.width);
>> +
>>        if (pll->flags & CLK_MESON_PLL_ROUND_CLOSEST)
>>                val = DIV_ROUND_CLOSEST_ULL(val * frac_max, parent_rate);
>>        else
>> diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
>> index 7b6b87274073..e996d3727eb1 100644
>> --- a/drivers/clk/meson/clk-pll.h
>> +++ b/drivers/clk/meson/clk-pll.h
>> @@ -29,6 +29,7 @@ struct pll_mult_range {
>>
>>   #define CLK_MESON_PLL_ROUND_CLOSEST  BIT(0)
>>   #define CLK_MESON_PLL_NOINIT_ENABLED BIT(1)
>> +#define CLK_MESON_PLL_FIXED_FRAC_MAX BIT(2)
> Remove this.
>
>>   struct meson_clk_pll_data {
>>        struct parm en;
> --
> Jerome
diff mbox series

Patch

diff --git a/drivers/clk/meson/clk-pll.c b/drivers/clk/meson/clk-pll.c
index bc570a2ff3a3..f0009c174564 100644
--- a/drivers/clk/meson/clk-pll.c
+++ b/drivers/clk/meson/clk-pll.c
@@ -36,6 +36,12 @@ 
 #include "clk-regmap.h"
 #include "clk-pll.h"
 
+/*
+ * Some PLLs with fractional multipliers have fractional denominators that
+ * are fixed to "100000" instead of the previous "(1 << pll->frac.width)".
+ */
+#define FIXED_FRAC_MAX			100000
+
 static inline struct meson_clk_pll_data *
 meson_clk_pll_data(struct clk_regmap *clk)
 {
@@ -57,12 +63,17 @@  static unsigned long __pll_params_to_rate(unsigned long parent_rate,
 					  struct meson_clk_pll_data *pll)
 {
 	u64 rate = (u64)parent_rate * m;
+	unsigned int frac_max;
 
 	if (frac && MESON_PARM_APPLICABLE(&pll->frac)) {
 		u64 frac_rate = (u64)parent_rate * frac;
 
-		rate += DIV_ROUND_UP_ULL(frac_rate,
-					 (1 << pll->frac.width));
+		if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)
+			frac_max = FIXED_FRAC_MAX;
+		else
+			frac_max = (1 << pll->frac.width);
+
+		rate += DIV_ROUND_UP_ULL(frac_rate, frac_max);
 	}
 
 	return DIV_ROUND_UP_ULL(rate, n);
@@ -100,13 +111,18 @@  static unsigned int __pll_params_with_frac(unsigned long rate,
 					   unsigned int n,
 					   struct meson_clk_pll_data *pll)
 {
-	unsigned int frac_max = (1 << pll->frac.width);
+	unsigned int frac_max;
 	u64 val = (u64)rate * n;
 
 	/* Bail out if we are already over the requested rate */
 	if (rate < parent_rate * m / n)
 		return 0;
 
+	if (pll->flags & CLK_MESON_PLL_FIXED_FRAC_MAX)
+		frac_max = FIXED_FRAC_MAX;
+	else
+		frac_max = (1 << pll->frac.width);
+
 	if (pll->flags & CLK_MESON_PLL_ROUND_CLOSEST)
 		val = DIV_ROUND_CLOSEST_ULL(val * frac_max, parent_rate);
 	else
diff --git a/drivers/clk/meson/clk-pll.h b/drivers/clk/meson/clk-pll.h
index 7b6b87274073..e996d3727eb1 100644
--- a/drivers/clk/meson/clk-pll.h
+++ b/drivers/clk/meson/clk-pll.h
@@ -29,6 +29,7 @@  struct pll_mult_range {
 
 #define CLK_MESON_PLL_ROUND_CLOSEST	BIT(0)
 #define CLK_MESON_PLL_NOINIT_ENABLED	BIT(1)
+#define CLK_MESON_PLL_FIXED_FRAC_MAX	BIT(2)
 
 struct meson_clk_pll_data {
 	struct parm en;