diff mbox series

[v15,29/32] ARM: dts: aspeed: yosemitet4: add RTQ6056 support on 11 (0x41).

Message ID 20240906062701.37088-30-Delphine_CC_Chiu@wiwynn.com (mailing list archive)
State Handled Elsewhere
Delegated to: Geert Uytterhoeven
Headers show
Series Add i2c-mux and eeprom devices for Meta Yosemite 4 | expand

Commit Message

Delphine CC Chiu Sept. 6, 2024, 6:26 a.m. UTC
From: Ian-I-Chien <Ian_Chien@wiwynn.com>

---
 arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Krzysztof Kozlowski Sept. 6, 2024, 9:28 a.m. UTC | #1
On 06/09/2024 08:26, Delphine CC Chiu wrote:
> From: Ian-I-Chien <Ian_Chien@wiwynn.com>
> 

This is ridiculous... No commit msg, no explanation, subject inaccurate,
no SoB from anyone.

For obvious reasons this cannot be accepted.


> ---
>  arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> index 4090725160f9..d056f6d5ff6e 100644
> --- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> +++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
> @@ -1081,7 +1081,7 @@ power-sensor@40 {
>  	};
>  
>  	power-sensor@41 {
> -		compatible = "ti,ina233";
> +		compatible = "ti,ina233", "richtek,rtq6056";

NAK, not correct. Read bindings.

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index 4090725160f9..d056f6d5ff6e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1081,7 +1081,7 @@  power-sensor@40 {
 	};
 
 	power-sensor@41 {
-		compatible = "ti,ina233";
+		compatible = "ti,ina233", "richtek,rtq6056";
 		resistor-calibration = /bits/ 16 <0x0a00>;
 		current-lsb= /bits/ 16 <0x0001>;
 		reg = <0x41>;